I honestly like watching your videos, they’re good quality, gives good information, and the stories at the end is what makes you different from other welding channels. keep up the good work!👍🏻
I love all the video you guys post on welding this , and that how to trick , and what to do in back spots , and etc , but I really like hearing the story about life , and history . MAN keep them coming !
Just as a question, why would you prefer to freehand this root rather then walk the cup? I know that when people usually think of walking the cup they are usually thinking about big step out motions. But just a little wiggle will keep your tungsten directly into the puddle. Any reason you would rather free hand?
Awsome video great welding and glad to see somebody ain't afraid to bring God up thanks guys that really made my day keep up all the great work see yall next time.
What if theres evil employees with a evil boss? Trying to find a diff job hope I get it soon. Do you move the tungsten the width of the filler rod for the root pass?
Excuse my ignorance, I'm not in the trade, but why would a weldor back-feed? I imagine clearance issues with the filler wire, but is there a mechanical reason? Specs maybe?
Honestly its mostly used to prevent suck back and get enough reinforcement on the bottom. You really only backfeed the bottom as to where when you get on top it's more of a lay wire technique.
I have been practicing at home, trying to run root pass on pipe, but I’m struggling with my tig tig, cause it has a button instead of scratching start, and me being new to this, it makes it more difficult, I’m also struggling trying to walk the cup, on the bottom side of the pipe, any advice?
What kind of scotch brite do you use to clean the filler rod? Would you happen to have a link? I might be overthinking this, but thank you for your time.
I’m from Louisiana my son gradiometers the 18th he’s trying to go to Houston to Tulsa for welding man I’m trying to get him to come there. Me being a welder I learn from y’all still I know he would be better there
If you want to learn to PIPE WELD. Go to Alabama Pipe Welders Academy. They pay you while in school you get a completion bonus. It’s 16 weeks. You get all your tools and a guaranteed job afterwards. Oh !! the kicker the employer pays your tuition. So it’s debt free. 1st Class training. They have Lowest Student teacher ratio in the country. 1:5
@@WELDorDIE thanks you my brother i just comparing the prices here in Texas is more expensive your school looks very nice and I like the techniques . GOD BLESS you my brother
Soy un suscrip. De tu canal. Ay algo que no me gusta espero no se molesten.. cuando graban no se ve la raíz en su manejo de líquidos Para apreciar todos los movimientos de fucion..tanto de raíz como de carA .así solo nomas se aprecian los comentarios o narración ..lo menciono para que tu canal crezca más y sea el .mejor de acuerdo alA nación que lo ES..saludos desde dallas tx
God bless you brother! Read the Savior Jesus Christ Ministry to the Americas after his resurrection he told John 10 verse 16 other sheep I have not of this fold and they will hear my voice! I taught welding for many years and this is a great video I want you to know your other voice to me has really helped me today like the savior's words to the people in The Book of Mormon they were all converted all healed and none were lost for almost two hundred years Hallelujah you can find that in fourth book of Nephi! Love you brother! Thank you very much!
Nice Try... But I'm looking for a little more teaching, and a little less preaching please. I need help on body position. line of sight, torch grip. hand(both hands) props, motion of arc.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
I honestly like watching your videos, they’re good quality, gives good information, and the stories at the end is what makes you different from other welding channels. keep up the good work!👍🏻
It really does.
I love all the video you guys post on welding this , and that how to trick , and what to do in back spots , and etc , but I really like hearing the story about life , and history . MAN keep them coming !
Wish my welding instructors had half the skills or life knowledge as you have. Thank you for making these videos
Great job. Love the words you have for the world... we sure need it in these times...
I enjoy the welding, but the stories and the word being passed on at the end is the best! Thank you!
Hands down one of the top. How to back Feeding videos on RUclips good job of explaining
Welder speaking truth, amen. Some of you learned a little more then just how to back feed. Good video!
Love you philosophical lectures. So appropriate.
Thank you Scotsman your an inspiration
Another excellent video, I am a shop teacher in a Christian High School in Canada. Preach it Brother!
I wish your bright future. I like your every video.
If the feeding rod touches the bevel while welding underneath would the wire get struck to the bevel if it touches the upper side
I’m learning this but would u have to keep backing out if h just turn the heat down don’t see why u keep doing that never seen that
U got the best inspirational speeches.
Where could I find that TIG finger or what’s it made out of
Good job 👏, what. Ceramic cup number was that ? #8 ??
Amen brother! Thank you for the welding tips & for the Word.....God Bless!
Just as a question, why would you prefer to freehand this root rather then walk the cup? I know that when people usually think of walking the cup they are usually thinking about big step out motions. But just a little wiggle will keep your tungsten directly into the puddle. Any reason you would rather free hand?
Awsome video great welding and glad to see somebody ain't afraid to bring God up thanks guys that really made my day keep up all the great work see yall next time.
Where could I get one of the Tig torch handles? Would love the comfy upgrade over my ck worldwide
Love the video and testimony great advise
What if theres evil employees with a evil boss? Trying to find a diff job hope I get it soon. Do you move the tungsten the width of the filler rod for the root pass?
Also on how to properly grind a root pass on stick welding how to get all the wagon tracks thank you
Real relaxing video, and I learned what backfeeding is. Nice.
What was your heat on
I love these vids! Good info plus almost always some good words of wisdom
You always come through for me my weld family
we are glad we can help yall out! we will keep the videos coming.
Spent 20k+ at WWA,
They don't teach, unless you're a hard kiss arse
Thank you for the upload. Will practice tomorrow at school and see their jaws drop
Holy shit?!
Amen bro!
I'm a pipe welder, working as a fitter for some @$$hole welder right now. Needed those words of encouragement.
Scott..do u have a part number or web site for the insulator he's using...??...can't find them anywhere..thanks for another solid vid...
Thank you for your witness. Amen.
Excuse my ignorance, I'm not in the trade, but why would a weldor back-feed? I imagine clearance issues with the filler wire, but is there a mechanical reason? Specs maybe?
@Swampy thanks bud.
Honestly its mostly used to prevent suck back and get enough reinforcement on the bottom. You really only backfeed the bottom as to where when you get on top it's more of a lay wire technique.
@@ifitaintrounditurnitdown1735 thanks.
The leather handle on your tig tourch. Where do you get those are they custom made
I have been practicing at home, trying to run root pass on pipe, but I’m struggling with my tig tig, cause it has a button instead of scratching start, and me being new to this, it makes it more difficult, I’m also struggling trying to walk the cup, on the bottom side of the pipe, any advice?
Is he using a stubby gas lense set up on a 17 torch?
+Shad Orourke no all jumbos
Alabama Pipe Welders Academy ok thanks
What kind of scotch brite do you use to clean the filler rod? Would you happen to have a link? I might be overthinking this, but thank you for your time.
Great video... and thanks for the word brother
How much meat is left inside ? Do you try to aim for about .3/32" ?
Good feeding technique I was wondering about that
How many amps you running the root at?
Jacob Martinez 98
Appreciate it brotha
What did he use to sharpen his tungsten ?
His teeth.
I need to see how to back feed stainless schedule 10 and 40
There's no difference. Some people dip and key hole stainless when backfeeding but you can still continuous feed on stainless.
Wow man, I'm very much encouraged by your words. 4/21
4:59 isnt that a big no no bringing the arc outside the bevel?? Ik its just a demo but I just noticed. Otherwise thanks for the tips!
Alex Breitenbach it does look like it but no that was still inside the bevel
I wish Hobart institute of welding technology taught this back in '97.
Got a link of that flashlight
daniell Bidley rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F163341686764
🔥🔥🔥🔥🤝 I need a demo on some stainless please on the back feed technique
nice weld, nice message. peace and love from an old english asme9er
Great video
Wise words man
Really was learning something till the sermon started.
I’m from Louisiana my son gradiometers the 18th he’s trying to go to Houston to Tulsa for welding man I’m trying to get him to come there. Me being a welder I learn from y’all still I know he would be better there
If you want to learn to PIPE WELD. Go to Alabama Pipe Welders Academy. They pay you while in school you get a completion bonus. It’s 16 weeks. You get all your tools and a guaranteed job afterwards. Oh !! the kicker the employer pays your tuition. So it’s debt free. 1st Class training. They have Lowest Student teacher ratio in the country. 1:5
I just wanted to see how to tack up a backfeed setup and mans went on a whole life chat lol
Good stuff
Can you guys do a video on how to do a 2 inch pipe on a 45 tig root with SS stick
Yeah, yall are on it!!!!... Geet'er don!....
God bless my brother 💪
Video on how to prepare your pipe the landing and also fitup
Where's all the videos on carbon steel and stainless steel tig welding off a SA 200 Lincoln welding machine , ....
Nice brother 😁👌
love it man!
Awesome video APWA. I got a question, do you still make those tungsten holder/flashlights?
you can purchase them on our website... scottsmantools.com/collections/all
Gracias amigo por tus consejos godblees
Nice root!
can you show us downhill
YES DOWNHILL ROOT PASS PLEASE
I really like these christian themes, just like srkcycles, i wish more channels would do this
Very beautiful brother thanks 🙏
Love the preaching Brother. This world need more JESUS!!
How the hell r u doing it?
@Ian Charles I can t. It s just falling me down.
Good words 👏
Wtf are you doing at 5:12 for the second time? And in the meantime the monolog is.. pretty deep.. SERIOUSLY WTF ARE YOU TALKING ABOUT
Ferramenta amolada
Ievery tome he pulls the cup aeay from the puddle he loses the cone.
I have to learn this technique,!
My welders brothers just wondering what's the price to pipe welding class Combo
El Taco H. SARCASTIC AND TASTY ranges from 9k to 11k depending on experience
@@WELDorDIE thanks you my brother i just comparing the prices here in Texas is more expensive your school looks very nice and I like the techniques . GOD BLESS you my brother
@@WELDorDIE ohh! I forgot I was working for Turbines. Inco. Hastalloy X,W etc.
5 bucks says he couldnt do that 12" off the ground!
James fritz your on
Soy un suscrip. De tu canal. Ay algo que no me gusta espero no se molesten.. cuando graban no se ve la raíz en su manejo de líquidos Para apreciar todos los movimientos de fucion..tanto de raíz como de carA .así solo nomas se aprecian los comentarios o narración ..lo menciono para que tu canal crezca más y sea el .mejor de acuerdo alA nación que lo ES..saludos desde dallas tx
Awesome word's and great welding
I wii try tomorrow ❤️
Worst thing is to learn how to back feed once they hit a big pipe they cant weld mf trying to put the wire all the way up to the pipe lol
Holy cow!
Jennifer Pasten gotweldrepair!
Nice welding technique but no need to bring superstition in to it
thank you
Tem que depositar mas material 🙄🙄
Nice, seems Americans always root tack.. We always get a good shouting at for root tacking always have to bridge tack.
Remember that Cat-O-9 tails is also a useful tool when it's needed brother.
God bless you brother! Read the Savior Jesus Christ Ministry to the Americas after his resurrection he told John 10 verse 16 other sheep I have not of this fold and they will hear my voice! I taught welding for many years and this is a great video I want you to know your other voice to me has really helped me today like the savior's words to the people in The Book of Mormon they were all converted all healed and none were lost for almost two hundred years Hallelujah you can find that in fourth book of Nephi! Love you brother! Thank you very much!
👍👍
Talk about welding not about philosophy 😂
❤
Nice Try...
But I'm looking for a little more teaching, and a little less preaching please.
I need help on body position. line of sight, torch grip. hand(both hands) props, motion of arc.
Run the rod, not your mouth
Cut the garbage out of the video around 430 to 530... more about the welding....
🇧🇷🇧🇷🇧🇷👏🏼👏🏼👏🏼