#TPA3116D2

Поделиться
HTML-код
  • Опубликовано: 6 сен 2024
  • #TPA3116 D2 200 WATTS 2.1 AUDIO AMPLIFIER BOARD full detail in Hindi, with audio test and temperature test.
    You can buy it from here, यहाँ क्लिक करके खरीद सकते हैं
    amzn.to/37FLSni
    amzn.to/2S2aHTJ
    amzn.to/3aWNGKs
    amzn.to/3aVG37l
    amzn.to/2U5iN0B
    amzn.to/2U65IE6
    amzn.to/2U84KaE
    #classdamplifier
    #classDaudioboard
    #2.1chanellamplifier,
    #highpoweramplifier,
    #bestqualityamplifier

Комментарии • 1,6 тыс.

  • @vl_prashant6252
    @vl_prashant6252 5 лет назад +73

    Kuch bhi ho videos upload karna band mat karna .. aapko bahut detail knowledge hai audio circuit ki hume bahut sikhne ko milta hai apse.. thank you for this video

  • @vickieflair7782
    @vickieflair7782 3 года назад +9

    Too much crowd of people uploading videos related to audio amplifier. But this one was areal authentic and heavily technical review.. Hats off Bro. Keep doing this work. You are a Guru.

  • @custommodz8568
    @custommodz8568 3 года назад +3

    Ye board Mai 3 din pehala liya aapki video dekh ka 870 rupees ki bahut acha bass ha Mai ise 22volt deta ho PC smps se aur maina iska cabinet Mai fan lagaya hai kyunki iski filter coil heat hoti hai best board hai for home use isko outdoor bhi use Kar sakta hai Mai isma 60watt+60watt ke 6.5 inch ka woofer lagaya ho Twetter section Mai aur ek 4ohms 8 inch ka 100 watt subwoofer lagaya ho bahut acha perform karta hai thanks sir for making video agar aap ye amplifier ka video nahi banata to Mai ye nahi leta

  • @mukeshghadai2685
    @mukeshghadai2685 4 года назад +1

    Namaste sir aap ke vdo dekhke Maine yeh kit liya hai. Pehle mein 4440 ka kit chalata that lekin yeh gazab hai audio quality excellent
    Sir yeh tisri bar aapke vdo dekh ke mein apko sukriya kehne see rok nahin pays thnx sir.

  • @vishwasmarathe2424
    @vishwasmarathe2424 4 года назад +20

    53 dislikes from bad click bait RUclipsrs
    Osm video bro u helped me a lot

    • @WhatIThink
      @WhatIThink  4 года назад

      Thanks

    • @medottariqaziz
      @medottariqaziz 4 года назад

      @@WhatIThink sir mere paas ye same board hai but mai jab power deta hu board ko tab speaker pop sound karta hai 2 sec. k liye, any solution?

    • @nakitapatidar60
      @nakitapatidar60 4 года назад

      @@medottariqaziz me to

    • @medottariqaziz
      @medottariqaziz 4 года назад

      @@nakitapatidar60 FEW DAYS BACK MY BOARD GOT FRIED BRO, SO TAKE CARE OF YOURS!!!!

  • @ScienceKaariLadka
    @ScienceKaariLadka 3 года назад +2

    This is Genuine guy with genuine knowledge....keep it up...👌👍

  • @jigneshbhoi3214
    @jigneshbhoi3214 4 года назад +7

    Sir
    It can possible to connect 4ohm speaker to L & R and 8ohms speaker connect to the bass ?

  • @vinodpanchal8750
    @vinodpanchal8750 4 года назад +1

    सर आप की आवाज और समझाने का तरीका बौहोत ही अच्छा है

  • @root337
    @root337 4 года назад +5

    can i use 2 * 50 watt woofer 4 ohms and 100 watt subwoofer at 8ohms.......will it be ok

  • @ananta5453
    @ananta5453 4 года назад +2

    bade bhai kya me 24v 5a use karsak ta hun ? dual 8 inch at 60 watts 120 total only the subwoofer.

    • @WhatIThink
      @WhatIThink  4 года назад +1

      Bilkul...Lekin full volume me nahi chala payenge.

    • @ananta5453
      @ananta5453 4 года назад

      @@WhatIThink kyu ?

    • @ananta5453
      @ananta5453 4 года назад

      @@WhatIThink mere amplifier k output me kuch sparks jesa sound ho raha he. aisa kyu ?

  • @abhiforlove15
    @abhiforlove15 4 года назад +9

    Can you please tell me the best speaker configuration for this board.

  • @mithilrao3835
    @mithilrao3835 2 года назад +1

    Sir, ham log students hain, aur apko dhyaan se sunte hai, apka video kaafi detailed hai, review ka quality of education and training skill ka level acca hai, bas thoda aur increase karo, just like speaker specification, subwoofer specifications, wattage input/output operating voltage, current. Because ham logo ko min to high voltage rating for operation of Kit and how much load of speakers or other items can be used on the kits, esko justify karne mai problem hai, also give idea from where to get cheap and best speakers, electronic components, subwoofer, passive speakers and more

  • @tapankumarnayak7791
    @tapankumarnayak7791 4 года назад +14

    12v में चलेगा तो भाई???
    maximum कितना ohm ka speaker chalega ?

  • @rajkashyap8829
    @rajkashyap8829 4 года назад +2

    Sir aap ke videos bahut hi acche hote hai aur aachi baat ye hai ke aap reply bhi karte hai
    Kripaya ye batiye maine ke tpa 3116 ka only subwoofer plate li thi
    Aur main usko tpa 2030 ke saath jod kar amplifier banana chahta hoo to kya karna pade ga
    Aur dono ki power supply kase dege

    • @WhatIThink
      @WhatIThink  4 года назад

      Agar 2030 ka board single supply wala hai to ise 3116 ke saath chala sakte hai..Otherwise dono ke liye alag power supply lena padega.

  • @jassipanchal86
    @jassipanchal86 4 года назад +5

    Bro ek question mere mind me ghum rha h ki woofer/ subwoofer ki RMS watt kaise pta karte hai reply must

  • @MagicHive
    @MagicHive 4 года назад +1

    unboxing to koi bachha bhi kar leta hai. But aapki knowledge ki kya baat hai. Keep up the good work!

    • @WhatIThink
      @WhatIThink  4 года назад

      Thanks for appreciation.

  • @prasadkutarekar5097
    @prasadkutarekar5097 5 лет назад +25

    Kaha se ho bhai? I would like to meet and help.
    Super informative content. Keep up man.

    • @WhatIThink
      @WhatIThink  5 лет назад +5

      Thanks for appreciation Sir...

    • @uttpalkant
      @uttpalkant 3 года назад

      @@WhatIThink sir can I use this kit 19volt 15ampear

    • @shehzadishe6418
      @shehzadishe6418 3 года назад

      Class 3 EVS ka paper kitne Ward car subwoofer Chala sakte hain aur Kitni full power supply de sakte hain

    • @shehzadishe6418
      @shehzadishe6418 3 года назад

      @@WhatIThink class GTPL bhakti ke upar kitne Vodka Sab Upar Chala sakte hain aur power board Kitni supply de sakte hain please

    • @Asraful_x
      @Asraful_x 3 года назад +1

      @@uttpalkant u can.
      I use 24v 10 A

  • @newzaada9395
    @newzaada9395 4 года назад +1

    Please video dalna band mat kijiyega aap aise hi Lage Rahe bahut achcha Gyan hai sar aapko god bless you sir

  • @shoubhiksamaddar4049
    @shoubhiksamaddar4049 4 года назад +4

    Can i Use 24volt 10amp power Supply... Please reply.. and Awsome video.. aur apka samjhaneka tarika bahut hi accha hai... 😊

    • @WhatIThink
      @WhatIThink  4 года назад +1

      Yes

    • @shoubhiksamaddar4049
      @shoubhiksamaddar4049 4 года назад

      @@WhatIThink Okay... And Thanks For the Reply...☺️

    • @BiteYt69
      @BiteYt69 4 года назад +1

      Bhaiya 24×10=240w output.
      Tpa3116d2 chip 100W deta hai aur 50w bridged,
      Use 22V 8A power supply, for low heating powerful sound, becos the if u give 24V×10A the 40W will go in heating.

    • @BiteYt69
      @BiteYt69 4 года назад +1

      I have the board, It gives 30W output with 12V 2A power adapter.

    • @shoubhiksamaddar4049
      @shoubhiksamaddar4049 4 года назад +3

      @@BiteYt69 Thanks For Your kind reply bro.. But I Have Already Purchased 24 volt 10 amp Power Supply.. And as it's a class d ic it's efficiency is arround 90% so If i give 220watts then it will give 200 watt.. but there is no 22 volt 10 amp power supply available so i have bought 24 volt 10 amp one.. and Iam Using a 8 inch subwoofer and two 6×9 coaxial speakers.. thats why i needed more power.. and believe me sound is awsome.. as there Is no Power Deficiency.. you can try it.. 😉...

  • @papitasingh5633
    @papitasingh5633 5 лет назад +2

    Aapne bahut achha video banaya h.
    Full details Diya aapne.hedfone me ham sune h
    Super Bhai.

  • @shasashu
    @shasashu 4 года назад +6

    Awesome video brother. Keep them coming.
    Mujhe detailed and well explained tech videos pasand hain. Thank you for doing these videos.

  • @s.ksondhiya9427
    @s.ksondhiya9427 4 года назад

    Bohat बढ़िया sir ji मैं sound और board kit amplifier in सभी का bohat interest है

  • @sushilkumarrana6575
    @sushilkumarrana6575 4 года назад +5

    I have 8" 2 woofers 40 watts type. And what else I need to make a good boom box by using this kit

    • @WhatIThink
      @WhatIThink  4 года назад +3

      You can choose any kit link given in description.

    • @neerajkuswaha2901
      @neerajkuswaha2901 4 года назад

      @@WhatIThink Sar is board ki awaz bahut hi kam hai tpa3116d2 subwoofer amplifier board 2.1

    • @neerajkuswaha2901
      @neerajkuswaha2901 4 года назад

      Aap is bhoot ki jankari den 9627314137

  • @dilipmore9477
    @dilipmore9477 5 лет назад +2

    मेरा नाम दिलीप मोरे हैं मैने आपका विडीओ देखा बहुत अच्छा लगा जो साउंड ईसका हे आज पहेलबार सुना अगर दुसरा सरकीट बनाओगे तो झीरो पी सी बी पर बनाना और ऐसेही बोलकर हर एक चीज दीखाकर उनका नाम लेकर बनाना क्योकी मुझे ऐसी सरकीट बनानी है तो प्लीज आपसे रीक्वेस्ट हे मै आपके जवाब का ईंन्तजार करुंगा
    धन्यवाद
    जय शंकर

  • @VIPINSAINI_20
    @VIPINSAINI_20 5 лет назад +6

    I have this Amplifier Board and now I'm asking for help with
    1. Coil Heating Problem.
    2. Capacitor Problem.
    3. Bluetooth Module.
    Please Help me with this😧😧

    • @WhatIThink
      @WhatIThink  5 лет назад +3

      I will put solution for coil heating.
      Which capacitor...Please give detail.
      You can use any Bluetooth module with this.

    • @VIPINSAINI_20
      @VIPINSAINI_20 5 лет назад +2

      @@WhatIThink
      you said in video that those 35V 2200uf capacitor are not good enough.
      Now I have extra 2 Capacitors 35V 10000uf.
      But their pin are bit bigger
      Now what I can do.

    • @aniruddhkavishwar465
      @aniruddhkavishwar465 3 года назад

      @@VIPINSAINI_20 yee bohoth jyada he bhai agr 4700uf hota to bhi enough hota

    • @sumit8922
      @sumit8922 3 года назад +1

      @@WhatIThink capacitor kitne voltage ke lagaye tpa3116 d2 me?? plzz reply

    • @rpdhadwal
      @rpdhadwal 3 года назад

      @@WhatIThink sir Coil Heating ka solution dijiye please

  • @souravdas1356
    @souravdas1356 4 года назад +2

    Vaiya rca input kayse banaye....uski liye 1 video banaiye plz.... 1vi video nahi he youtub me

    • @WhatIThink
      @WhatIThink  4 года назад

      Kisme chaahiye RCA input ?

  • @projectswithnischay317
    @projectswithnischay317 4 года назад +3

    Sir kam se kam ham kitne watt k speaker and sub woofer laga sakta ha is me

  • @pallabdey5050
    @pallabdey5050 4 года назад

    Appka video details mey hota hai is liya accha lagta hai

  • @valsazacharias2105
    @valsazacharias2105 5 лет назад +3

    Can we give laptop's charge of to this of 20v 3A
    Plz reply ok

    • @aryanthakur2096
      @aryanthakur2096 4 года назад +2

      Yes you can because it supports 12-24v dc

  • @amit1gulia
    @amit1gulia 3 года назад +2

    Thanks for your video. Good to see. I need help as one of the coil for subwoofer is heating. Aap koi tareeka bata sakte hai usko theek karne ka. Also static noise is high even when volume is zero

  • @hiteshghazal
    @hiteshghazal 5 лет назад +4

    हेलो नमस्कार
    मुजे ic3886 का रेडी डेक चाहिए क्या मिलेगा ऑनलाइन में 2.1 मिलता है मुजे 2.0 चाहिए वोल्युम बास ओर ट्रेबले के साथ
    2 दो स्टीरियो ओर 2.1 कोई फर्क है
    प्लीज् जानकारी दीजिये
    अभी में sonyo 4440 वाला हिमाटोने का डेक उस कर रहा हूँ जो सर्किट फिलिप्स ने बनाई थी मेरे पास 10 इंच के 120mm मैग्नेट 4oms Apex का वूफर वाला 3 वे स्टीरियो है
    99790 99750

    • @WhatIThink
      @WhatIThink  5 лет назад +1

      2.1 में लेफ्ट राइट के साथ सबवूफर अलग से होता है। amazon पे मिलता है

  • @kapilsoni4631
    @kapilsoni4631 3 года назад +1

    Nice kit....Mast Punch hai...

  • @yashjadon8440
    @yashjadon8440 4 года назад +3

    "Hamesa full volume par to nahi chalayenge" se kya matlab h ye adepter enough supply ni deta h kya mere pas bhi same adepter h

    • @WhatIThink
      @WhatIThink  4 года назад

      Yes ampere kam hota hai laptop ki power supply me.

    • @shutdahellup69420
      @shutdahellup69420 4 года назад +2

      Full volume par chalana h toh 21V aur 5-6A ki psu honi chahiye varna amp clipped signal bhejta h

  • @StrangeMemer
    @StrangeMemer 4 года назад +1

    Iske 50 watt output me mujhe treble bhi lagana hai crossover network use Kar ke .
    toh app bataiye ki Mai kitne watt ka treble and speaker lagau ?
    Plzz tell me...🙏

  • @electronicshelpcare
    @electronicshelpcare 3 года назад +5

    Class D amplifier is the best

  • @dr.barunsarkar6158
    @dr.barunsarkar6158 4 года назад +1

    Audio engineering #AudioEngineering . Brilliant.

  • @nadeemakhtar5644
    @nadeemakhtar5644 4 года назад +4

    speakers aur subwofar k liye b 1 video bana dein jo is k sath laga sakon.
    thank u

  • @vineetchandeliya4751
    @vineetchandeliya4751 4 года назад

    Aapne bahut acche se samjhaya h thanks

  • @jakk2ahao
    @jakk2ahao 5 лет назад +3

    any speaker pop and noise and overheating of output coils...please reply bro.

  • @kanchanmusical1663
    @kanchanmusical1663 4 года назад +2

    Sir Subwoofer or speaker konse use Kare or kitne watt / ohm.
    Plz bataiye

  • @siddu4
    @siddu4 4 года назад +3

    will this amplifier work with my sony hifi speakers ( Model MHC GX 2000 )

  • @qaisarali97
    @qaisarali97 4 года назад +1

    Aapka details discussion achha lag raha hai

  • @prakashkori8014
    @prakashkori8014 5 лет назад +6

    Ek like to Banta hi

  • @Digitalcreator9165
    @Digitalcreator9165 4 года назад +1

    Apka jitna video hai sb achaa hai dost.

  • @binaykumardawn229
    @binaykumardawn229 5 лет назад +3

    Bro, in this amplifier boad which speaker should play

    • @uttpalkant
      @uttpalkant 3 года назад

      2pic 4inch speaker 1pic 8inch subwoofer.voltage_12volt 10amperar too 19volt 7ampear

    • @uttpalkant
      @uttpalkant 3 года назад

      I have this kit. i,am use 19volt 10ampear

  • @prasadkoshy3603
    @prasadkoshy3603 Год назад +1

    Well explained. Can I connect a pre amp output from my av receiver to run a subwoofer?

  • @hamzaejaz502
    @hamzaejaz502 4 года назад +3

    Kiya Iss Board Mein 5.1 Aati Hai?

  • @sinhaprabhat9938
    @sinhaprabhat9938 3 года назад

    Sir you are best to explain about any device

  • @shashwatanand2238
    @shashwatanand2238 3 года назад +1

    Can you make video on, how to fix thumping or speaker pop up issue on startup & powering off on this board! What On Board components are required to change for better performance, please! You seem quite knowledgeable in these audio amp. Boards!
    THANK You!, Jai hind, Vande Mataram 🇮🇳🙏

  • @rk-dc2hm
    @rk-dc2hm 4 года назад +2

    Sir is amplifier ko 12 wolt battery se kaise chalaye

    • @WhatIThink
      @WhatIThink  4 года назад

      Ek video hai channel par usko dekhiye.

  • @FreeCircuitLab
    @FreeCircuitLab 2 года назад

    Nice channel 😊😊

  • @birendersingh1498
    @birendersingh1498 3 года назад +2

    Hi Sir, Your videos are awesome and well explained. Can you please suggest me which board is better for car audio from tda7498 vs 3116d?

  • @NSNG1540
    @NSNG1540 5 лет назад +1

    Jabardast details batai hai aapne..I think the best video on tpa3116d2 amp.. plz suggest I am thinking of using M28 bluetooth module with this amplifier. M28 is connected to the aux port of this amplifier. Aise karne se koi audio loss to nahi hogaa..basically main is amp ko bluetooth se use krnaa chahta hoon..

    • @WhatIThink
      @WhatIThink  5 лет назад

      You can connect ...There will not be any power loss

  • @ranasoundanddj2552
    @ranasoundanddj2552 4 года назад +1

    ISS board main 23 volt power supply de sakte hai

  • @AmplifierWorld
    @AmplifierWorld 4 года назад +2

    Good information, nice video on class d amplifier

  • @gajendraprasadsahu703
    @gajendraprasadsahu703 2 года назад

    Thank you sir very nice video. 🙏🙏🙏

  • @rohitjadhav2104
    @rohitjadhav2104 3 года назад +1

    Sir capacitor kaise lagaye. Or konsa power vala lagaye.
    Aapake pass bhi hain bord to jara karke bataye.
    Speaker kagate time kaise upyog kare capacitor crear sounds aaye
    Or details chahiye sir.

  • @paswanravi5888
    @paswanravi5888 3 года назад

    Hame viewers ko detailed videos hi pasand aati hai Sir ji👍🏻

  • @adhishwarmishra
    @adhishwarmishra 3 года назад

    After watching around 30 videos, i m now satisfied.. Keep uploading

  • @TheEndGamersFF
    @TheEndGamersFF 3 года назад

    Video bohot achi hai bro.. Kafi knowledge mili hai is se..

  • @darkworld4366
    @darkworld4366 3 года назад

    Sir mere pas bhi same amp kit hai but uski coils me heating problem itni bhi nahi hai jabki Mai use full volume me use karata hu Mai best amp hai 😊😊😊😊🔥🔥🔥🔥🔥

  • @9dninja537
    @9dninja537 3 года назад

    aap ki videos bht achi hain aur bht detail me hain

  • @mukesharyan4336
    @mukesharyan4336 3 года назад

    You are great sir
    Doing very well for us.
    🙏🙏🙏🙏🙏🙏

  • @surinderdhiman
    @surinderdhiman 5 лет назад +1

    Very helpful and knowledgeable video

  • @ghanshyamsingh7814
    @ghanshyamsingh7814 4 года назад +1

    Sir apne jo capacitor batiya ha change karne ke liye to best capacitor Kon sa performance ke liye lagayie

  • @rajachoudhary5060
    @rajachoudhary5060 4 года назад

    Bahut hi badhiya video thumps up.

  • @agentgaming5839
    @agentgaming5839 Год назад +1

    Sir is board me 10 inch 117 watt rms ka subwoofer with 24v 8-10amp supply ke sath chalana sahi rahega? Please reply sir 🙏

  • @binodchowdhury3545
    @binodchowdhury3545 4 года назад +1

    Es bord ko transforma sa kasa bajay.or videocon ka smps hay us sa chalraha.bhiya ap bohot Acha samjata hay. Thanks jaldi video banya

  • @ajaygajhbhiye6335
    @ajaygajhbhiye6335 4 года назад +1

    Sir, aapke batane ka tarika bahot acchha hai.
    Mera panipuri ki stall hai usme 12v. 44amp ki battery par chalega kya

    • @WhatIThink
      @WhatIThink  4 года назад

      Chalega...Lekin full power nahi milegi...Aap ek voltage booster laga le 12 volt battery ke saath to bhadiya bajega..Ek video hai channel par eske baare me. Usko dekhiye samajh me aa jayega.

  • @कृषीसंवाद
    @कृषीसंवाद 22 дня назад +1

    Sir is board me bass treble board se input de sakte hai kya....thoda treble effect badhane ke liye

  • @warmboy3951
    @warmboy3951 2 года назад

    Sir Jab main is board ke sath samcon ka 3way network card use kar raha hun tb bhe only bass sub se nai aata thek se but I love the stereo quality please help me about this which network board is will be better for pure bass output.?

  • @bhartirasoi2456
    @bhartirasoi2456 5 лет назад +1

    Subwoofer ke liye lpf iss me pahale se laga hua hai Kay plzz uske bare me bateye aur pre amplification ke bare me bhi plzzzz

    • @WhatIThink
      @WhatIThink  5 лет назад

      Pre amp not required ....Sub filter is inbuilt on 100 watt output

  • @himanshukumar-jg8nh
    @himanshukumar-jg8nh 3 года назад +1

    Sir Boht hi Achii Video he..Sir is Board ke liye Subwoofer Or Speeker konse le .. please help..

  • @adityachatterjee4498
    @adityachatterjee4498 5 лет назад +1

    What is the supply transformer of stk4231 ??? Please tell me...

  • @naseershaikabdul2599
    @naseershaikabdul2599 4 года назад +1

    Shukriya bhot acha

  • @TechnicalBhakar
    @TechnicalBhakar 4 года назад +1

    Board acha h pr meri pasnd to class AB hi h nice video brother

  • @amansinghnikumbh9756
    @amansinghnikumbh9756 3 года назад

    Sir, bhot acha video bnai h app, very informative and detailed. Thank you.

  • @susmitaganguly5833
    @susmitaganguly5833 4 года назад

    Sir 3116 ma 19 v adapted lagna ca voltages up dawn kotha ha Mya ka karu

  • @mralap6529
    @mralap6529 3 года назад +1

    Filter coil heating ko kaise solve kru ? Vo bhot jyada garm ho rhi hai

  • @AjeetSingh-wj7rn
    @AjeetSingh-wj7rn 3 года назад

    I request to change in circuit low pass filter to high gain

  • @waliastreming6672
    @waliastreming6672 3 года назад +1

    Very good....damdaar

  • @ronalddixon6259
    @ronalddixon6259 5 лет назад +2

    Very good explanation, thank u dear Bro.

  • @MrLx-nb8qw
    @MrLx-nb8qw 2 года назад +1

    Hello sir mene abhi Hal hi me ye board li hai lekin bass line not working full volume pe bhi na ke barabar bass audio nikal raha hai program kya ho sakta hai please sir help

  • @debojitk
    @debojitk 3 года назад +1

    You sound very knowledgeable.. I am planning to make a sound box that is a so called bookshelf stereo speaker. This board looks like very optimum choice for me. Couple of questions- What should be minimum size of the enclosure. Can I put two speakers and one woofer in a single enclosure. In your video you stated that 12'' speaker/woofer should be used. Is it possible to use smaller speaker/woofer with same power rating. Do you suggest to buy an enclosure or make one?

    • @WhatIThink
      @WhatIThink  3 года назад

      You can use any speaker half to the power of amp irrespective of size. I have some videos on speakers and enclosure on my channel. Your questions are replied there.

    • @apppermission5927
      @apppermission5927 Год назад

      @@WhatIThink
      Can I use 5+5 watt subwoofer with a 15watt subwoofer
      Power supply is 12v 5amp

  • @jdbiswas2019
    @jdbiswas2019 3 месяца назад +1

    I connected Belson 4ohm 100w subwoofer and it burned out. Which subwoofer I should use?

    • @WhatIThink
      @WhatIThink  3 месяца назад

      Use original speaker ...100 watt woofer should work comfortably with this

    • @jdbiswas2019
      @jdbiswas2019 3 месяца назад

      @@WhatIThink sweton 4ohm 8watt speaker will work with this? Or please suggest me something else.
      Thanks for replying sir :)

  • @hirakbhuyan5283
    @hirakbhuyan5283 Год назад +1

    Sir speaker or subwoofer kitne kitne inch ka use kora

  • @goutam9351
    @goutam9351 3 года назад +1

    Sir 8ohm load Dunga to kya kare 100w ke liye please please 🙏🙏🙏 reply

  • @ITECHNICALSUPPORT
    @ITECHNICALSUPPORT 5 лет назад +1

    thanks ,my all problem solve

  • @vaghelagovind7579
    @vaghelagovind7579 3 года назад +1

    Best detail love you bro

  • @Gulshunsagar
    @Gulshunsagar 3 года назад

    Nicely Detailed specifications explained i appreciate it. Thanks. Please prefer a TPA3116D2 board for installing in tata ace loader.

  • @MaheshPawar-ln3rt
    @MaheshPawar-ln3rt 4 года назад +1

    Sir ....jo capicitor change Karne Hain.
    Us ke badle main konsa copicitor lagaye ...us ki volue Kya honi chahiye
    Please Reply..thnx

  • @royalrajputana9407
    @royalrajputana9407 3 года назад +1

    Sir Ae board me volume control laga hai vo volume control kaha pe milega or Ae volume control ka name kiya hai Ae 4440ic board ke bass trable board mai chalega ?? Huming kam hogi ??

  • @manojsonkar3190
    @manojsonkar3190 4 года назад +1

    Kya isse 10 inch 100w ke 2 woofer chal sakte h

  • @gajendraprasadsahu703
    @gajendraprasadsahu703 2 года назад

    Super digital sound sir

  • @parthajitbarui1813
    @parthajitbarui1813 3 года назад

    This ic produces am noise...fm channels become noisy when amplifier is being powered on...do you suggest any solution?

  • @amjadahmed7579
    @amjadahmed7579 3 года назад

    Sir,, kya is bord par 400 watts rms ka 12 inches pioneer subwoofer chala sakte h

  • @suvendudas797
    @suvendudas797 3 года назад +1

    Mera amplifier ka ek Chanelle Kam hi nahi karta abto muster volume barane ghatane pe speaker ki sound vi ja rahahai please help me

  • @yasirshahzad3732
    @yasirshahzad3732 3 года назад +1

    Bro your videos are awesome. Can you tell me which amplifier kit is used in cars for louder sound? i don't want to boost voltages to 24V.

    • @WhatIThink
      @WhatIThink  3 года назад +1

      TDA7388 is more than enough for car audio

    • @yasirshahzad3732
      @yasirshahzad3732 3 года назад

      @@WhatIThink for 100w woofer and 2*30W speakers? and on 12V?

  • @niharanipaul7423
    @niharanipaul7423 4 года назад

    Bahot accha samjhaya

  • @abuhanif4607
    @abuhanif4607 4 года назад +2

    My machine died after 10 minutes use....
    Power supply: 24 v 3 amp.
    Sub.: 4ohm 90 watt LG
    2 MINI SPEAKER FULL RANGE 40+40 WATT
    PLEASE GIVE ME SOLUTIONS