How to Make Automatic Bottle Filling Machine Using Arduino
HTML-код
- Опубликовано: 28 июл 2019
- JLCPCB Prototype for $2(Any Color): jlcpcb.com
Good News!
Now you can order me to design a custom PCB for you!
goo.gl/rUxA5C
List of Materials:
(Affiliate Links Amazon)
Arduino LCD 2X16:
amzn.to/4a313rh
Arduino NANO:
amzn.to/3Ncm9K3
(Affiliate Links Banggood)
Water Pump:
www.banggood.com/custlink/3KK...
Water Bottles:
www.banggood.com/custlink/GKm...
Large Pulley:
www.banggood.com/custlink/Dvv...
Small Pulley:
www.banggood.com/custlink/3mG...
Gear Remover:
www.banggood.com/custlink/KGK...
8mm Shaft:
www.banggood.com/custlink/GmG...
8mm Pulley:
www.banggood.com/custlink/v3K...
Belt:
www.banggood.com/custlink/Gmv...
Stepper Motor:
www.banggood.com/custlink/3vD...
Zip Ties:
www.banggood.com/custlink/K3v...
Stepper Motor Driver:
www.banggood.com/custlink/3K3...
2x16 LCD:
www.banggood.com/custlink/DmK...
Arduino Nano:
www.banggood.com/custlink/DKK...
5V Buzzer:
www.banggood.com/custlink/vvv...
LM7812CV:
www.banggood.com/custlink/m3m...
LM7805CV:
www.banggood.com/custlink/DvG...
DC Jack:
www.banggood.com/custlink/mmK...
DC Pin:
www.banggood.com/custlink/DKm...
Terminal Blocks:
www.banggood.com/custlink/3KG...
Tactile Button:
www.banggood.com/custlink/Gv3...
Male Female Header Pins:
www.banggood.com/custlink/3Dv...
Jumper Wires:
www.banggood.com/custlink/3DG...
Heat Sink:
www.banggood.com/custlink/D3D...
Spacers:
www.banggood.com/custlink/3GK...
PCB Gerbers & Code:
code and pcb gerber files are not free. Only serious people can buy it by contacting me on my fiverr page.
Note: Do not use this project for selling or re-uploading on any social site. only for personal use.
Also buy materials from given affiliate links. it will give me a little commission. Thanks
TOOLS:
Soldering Iron: goo.gl/cuAJQq
Soldering Paste： goo.gl/16xrgn
Third Hand Tool: goo.gl/5vCAiu
Multimeter :goo.gl/WxwQ2J
Battery % meter: www.banggood.com/custlink/GDv...
www.banggood.com/custlink/3K3...
Green Mat: www.banggood.com/custlink/KKm...
Like Us On Facebook:
goo.gl/rUxA5C
SUBSCRIBE HERE:
goo.gl/2Epk4x 
Хобби
As others say below; an inspired mechatronics project. I was particularly impressed with the construction detail; from design and PCB ordering, to use of hot melt glue to speed assembly of test mcn. You have given me the "kick" I need to complete my own project which involves filling bottle on a rotating platform, albeit with alcohol and to different depths. The demo convinced me to use Arduino processor. Tkx
Thank you for this. I am impressed with the quality of everything. The blue color of the water is a nice touch.
It means the same tools can be used for large project.
We just need to change hardwares else
Technical tools should be same
Greetings HomeMade
I have a question, where do I get the part that holds the 60 tooth pulley and makes it rotate freely ?, What's that piece called?, because in the link's in the description I did not find it.
Very well thought out. Great job!
You sir are a genius. Very professionally done and very simple explanation. I am new to your channel and now a subscriber. Please keep making more of these videos. 👍
where did u used third hand tool and green mat, please let me know
Hi, nice video. Just wonder how is the timing for the pump start/stop and for the step motor to turn. Thank you in advance.
Neat video! realistically you can’t use this type of pump, it’s not food safe. You’d probably want to use a peristaltic pump. The lack of feedback in the open system is also a concern, you’ll get uneven filling and possibly the motor could slip and you’d start missing the bottles. A cooler problem would be putting the caps on! I’d love to see your solution to that one!
Sir i want to make rotating plate like this having stop timing 3 sec then what can i do?
Please were is the link of the picture to make it at jlcpcp
A very good DIY project you made .Please give circuit and sketch for this project
Excellent!! Thank you ! Please please bring other project , I love to see what you will share next. Person like you supposed to be the professors in university. What makes it special is it is complete, the 2$ board cool !!
I need this one send dedail
Can you please tell me which materials you are using for home-mades like(soldering iron, glue gun & etc...) thanks a bunch
how do you decide time the pump is on for filling of bottle
Thank you for sharing your project man. you are a hope to humanity.
That's great project. Look forward for pcb
Very impressive - nice project, beautifully presented. Thanks for sharing.
Awesome bro you did this in a very professional and clean way.I recently subscribed your channel but i think it was worth it
Great video showing how to incorporate Arduino with practical manufacturing operations.
A speed control for the water pump, (ramp-up, full speed, ramp-down) at the beginning and end fill cycle would be a practical means for standardizing fill accuracy. There is a market for tooling-up small business productions using your Arduino skills.
The precision of this is awful for production. Just compare the last two fills. Looks to me these are 30ml fills but the last two look 3-5ml different. It's great for a hobbyist but it doesn't have a place in industry.
@@Shocker99
At least he is trying to show what he knows.
If you are a professional and you know better than him then help him to improve his skills? Rather than criticising his effort.
Hi sir, how to program aurdino and how buy the requirements matrial, can't understand the circuits pls elaborate the circuit sir...
Hi, can you do a tutorial on how you did the pcb, please.
Use a load cell to dose the liquid.. so you can program different bottles
Hi.
because i have changed the number of bottles from 6 to 10 how can i change the degrees that the motor will rotate in the code?
hello nice project, how can we measure how many liters are left in the upper tank and how can we pour it in the weight we determined into the glass
How you Setup the Fill volume for every bottle same ...?
Hello sir can you please upload a good image of the circuit that you designed
Which software you used for simulation of any circuit project
Really, its a very good project. But need just to suggest some modifications.
1- You can add a level sensor so you can ensure your bottles are filled properly.
2- Also, you may need to add a position sensor to ensure that the bottle is present and exactly under the filling hose.
What method do you use to provide power the Nano? And how many volts? USB, 5V pin, Vin.
Cool DIY brother, one plus thing you did is to include links to those parts, that helps a lot.
I'm waiting for the code and sketch before buying those parts.
Greetings from Tanzania 🇹🇿
Impressed! May I ask the purpose of the capacitor in th diagram?
Sir how can water file the first bottle the water is not coming up in pipe air
Superbly Done it without geneva wheel and mechanism
👏👏
Nice Project
My team and I did that exact same thing for my Microcontroller class' final project. We instead use an MCU from Cypress with the m8c architecture (owned and developed by Cypress). This one works smoothier haha
Very nicely done! A pleasure to watch someone applying their knowledge so well. Thank you for this video!
Sir can u make for me. My no is 9629274963. What will cost
Loved the automation - Nice.
This is an amazing project. Have you ever considered using Peristaltic Pump with Stepper Motor? I am looking to design my own project that is very similar to this one but does not require bottles.
I am wanting to design a way to do Automatic water changes on my saltwater reef aquariums. Saltwater (and freshwater) aquariums require regular water changes in order to keep certain chemical parameters in check. (Calcium, pH, Magnesium, Alkalinity, etc) The way this is accomplished is that once per week, 10% of the total volume of the aquarium's water is removed and is then replaced by new saltwater that has been prepared ahead of time. Most people remove 10% of the total water volume all at once using 5 gallon buckets and then replace the used saltwater with new saltwater using 5 gallon buckets. This is okay and all, but the BEST way to accomplish this would be to remove the 10% over the course of an entire week and also add the new saltwater (10%) over the course of a week. This is best accomplished using a Peristaltic Pump with a Stepper Motor.
Do you think that you could assist me with designing this? I would be more than willing to compensate you for your time. Please reply to this if I can contact you.
Did is Water pump work follow timer setting for top level of bottle? Thank Bro?
It's a great project. Really nice design and execution. Can we make a small machine run automatically using two stepper and one DC motor?
I want to make it for our client.
How much ml of water will be filled how measure water and what are the steps taken
Hello this project can be doing only whith this pcb
Sir pl guide me I'm trying to make this for my projects
Thanks . Any update regarding the code and the circuit?
Thanks for the good work
It is awesome...😍want to get more this type of projects☺
Yes
How bottles are stopping at correct point of pipe
Fabulous bro your every Idea is useful. Thanks
I like it and i hope to make the filling happen by value sensor to fill them equals level thank you
hi can i have the aruino program and can work with the linear covyor
How did you maintain the water quantity??
I need 50 nossel diffrent volume bottel filling machines how will it be made...
brother this is very nice.... great work.... i m also doing a project where I want to control the liquid quantity so that circuit gets auto cut after dispensing a specified amount of liquid. I want to know how you dispense exactly 60 ml liquid in this project?
Amazing video, really interesting, I hope I can make one. Greetings from Indonesia.
Amazin brother, i can't speak English very Well, but your proyect, like a loft off. Thank for chare your conocimientos and idea's.
Nice project....if you can attach a servo or gear motor with the water pipe stand which working ends on filling bottles....i mean before of the filling the stand set up her own place and after ends filling move down the stand.... This concept give this video full fill ness.. I can believe it..
How do you control the volume?
I really like this - FYI you are missing the resistors, the stop sensor, and the female headers for the arduino and the stepper motor controller. Been having a hard time working directly off of your parts list. You should update this.
Well done Ahmed .
You have done a great job
Can you make this for a liner line not rotary type
Beautiful proyect. , 🤓👍👍👍
great work man............ how does it know when to stop filling?
This is a good job man thank you for sharing
I love it ❤️
Great work done 👍👌
Very good your idea of machine with arduino. However, you could share the program that allows you to start the Automatic Bottle Filling Machine.
Great work sir,Really amazed by ur skill and mindset
very well done . Can you make a similar machine for wax filling upto 30 grams dispensing ??
my dear i need this program about this project.... please help me bro
Hi how are you doing . I want to tell you that we are not getting anything on our screen. What could the problem be??
Please i ask the schematic and program arduino
Sir can u give me link where I buy u used PCB in this project ,
A very good DIY project you made .Please give circuit, code and sketch for this project
I want a pcb for oil filling in 20 ltr jericane and drums
Good demonstration.
What will be the cost for making Mosquito liquid vaparizer refill.
Sir jaise isme water fill ho raha kya chocolate fill ke liye koi machine hai single-single chocolatea fill karna hai in cups of pouch packaging machine🙏
What can i do if I don't want any custom pcb in this project ? Please reply sir .
It is very good but can we use bigger bottle
does it work with Oil ?
Am impressed with your project bruh
how much voltege in power supplay
Cab be used in perfume production.. With high precision... NC man.... You light my mind
Amazing! Can you also teach to fit the lid of bottles?
Can I make this project on a breadboard...
Can it is used for the business use ?
creativity at It's best
Great concept. Where u from. Could i get one assembled.
Great job,like your presentation keep it up.
I need final product, prepared by you.
How much for this.
Iam manufacturing battery mashin please help mi
· I'm already making the machine but now I want to put some new card systems in do you want to help me if the project has passed, then you seal it
Ap axtra encom bhi kar sakte ho
Please share the Gerber File of the project...
best project, it can be use for commercial purpose as well .
Hey I need this in India from where I could Get it
this machine can custome the bottle?
interesting...
how much it cost ???
please let me know the details...
I suggest you develop the bee venom collector project with arduino or other electronic circuit
Sir can you please share the circuit diagram and PCB layout and thanks for such video for our learning.
ما شاء الله ... think you for this project
Where i can contact to buy the code adn pcb layout?
thanks you very much, great job!
Good project indeed👊
hi this is good project in my school. do u mind sharing the code in arduino? thnx