I’ve said it on other vids but I’ll say it again here: this man has carried me through my modding journey, and has never steered me wrong. 8 GBC/GBA/SPs later, just want to say thanks!
I’ve modded 4 GBA’s, 2 successes, 2 failures 😅 my dream GBA is a wide AGB model with a SP 101 screen but I don’t trust myself to do the mod and I can barely find anyone talking about how to do that online 😢
Man, if you can get an ips screen, I highly recommend it even if you have to trim a bit. But if you're going for that look, I got a knock off Halo Light back in the day that was better the original Halo Light, and my screen looked pretty close to my cousins SP screen. Maybe you can order one of those and use some parts from it for a screen brightness slider, and fits it all in the battery compartment! Then you would just need wires from the dial to the screen. Just an idea I thought of.
Good job Jake. I really enjoyed your his video. I’ve done 3 so far and now I’m starting to understand the shell issues.😂 I’ve sold one so far and plan on making more. I do this as a hobby and also cause I enjoy games/gaming. Keep up the good work.
I installed this mod on 2gbas and noticed that it buzzes pretty badly. After some measuring figured its high amp draw that the GBA cant handle well. To fix it you can squeeze in another 1000uF cap at CP2 to remove audio noise and one directly at the speaker (SP1).
@JakeSimmons Thank you I guess for my second mod, I'll go with Hispeedo V2, no clean juice battery, just straight regular batteries 👌🏻 Awesome video btw
I modded two gba’s back in 2019, added ags 101 screens to them. Just recently I took one of those and added a funny playing ips 3.0 and a usb c battery pack. Your previous videos helped Jake, thanks! Wish I had more reasons to mod more cuz it’s a lot of fun.
Been looking forward to this video! Very in-depth, well done! I've had the parts for my GBA mod for a while now, but haven't gotten a chance to put it together yet. This video will definitely come in handy when I do have time to do the mod!
I want to mod my old GBA not just to have a new shell and screen but to also make it USB-C chargeable and run ROMS as well as game cartridges. Any tips where to start?
hey bro do i have to ground myself when i'm working on gameboys or psps, i'm getting into this for the first time and I just want to make sure i don’t mess up my psp
I’ve never once grounded myself for any of this and do it on thick carpet but never once had a problem. I don’t think it would be an issue but if it makes you nervous it’s not gonna hurt anything to ground yourself
Hey people, hopefully someone can help me. Iam new at GBA modding and I have the same problems again and again: When I added a new case and new buttons, first, the shoulder buttons are not so "clicky" anymore (its stressful to click on them, it doesn't feel well) and the D-pad is also harder to click as the original buttons. You need more power to get a result. That leads to strained fingers. As a solution, I always switch to the original buttons again but they aren't really good looking in a golden or transparent case. Do you have some ideas to prevent this issues? Also I bought many sets of buttons and shoulder buttons from ebay. Its always the same, I dont know why. :(
I have a gba that i got at a garage sale that wasn’t working because of the power switch so i took it apart and cleaned it with 99% alcohol and gave it a gentle but good cleaning and it powered on. My guess is that it just got buildup of dirt and grime that made the contacts stop working
I actually just posted a video yesterday on a GBA and I linked your channel because you are so knowledgeable when it comes to gameboy modding. Unfortunately when I ordered my shell and screen kit I didn’t do enough research beforehand and had to trim the shell and it was a nightmare! 😅 but I hope others will learn from my mistake that I pointed out and hopefully people will consult your videos before they make an order lol
I don't know if you could answer this since you don't have a magic 8 ball but is there a way to make an educated guess on when/if oled displays for the GBA will be available?
I know the mods always come with wires to connect the components to the ribbon cable but I lost one so would you be able to let me know the size or kind of wire I need connect the components ?
Honestly I was kinda hoping for a new gba video even tho your most recent one isn't even that old, I just found my old original gba I had when I was a kid and i wanna restore it properly, this will help alot man 🙏 Edit: the ips kit doesn't show the 3 red wires yours comes with, is the listing just not updated or are you using a different kit? still have one ordered but wasn't sure if id need to source my own wires from my own stash lol
Unrelated to the great video, but: my 101 gba sp has a very low soublnd volume. I've read on the net that it might be a capacitor (cp1) gone bad. How can I make sure that's the case? Also, how to properly clean the power switch and volume wheel?
Most likely a cap replacement would fix your sound issue. Unless your volume slider is visibly rusty or something, it’s gonna be the capacitor. There is a link in this description for my short on how to clean your power switch. For volume wheels just put alcohol on it and scroll back and forth very fast for like 30 seconds and finish by blowing it with canned air to knock out any dust or debris
Can you make a tutorial on the 2ds lite? It's an unhinged DS lite made by someone named bozmodz that you can 3d print the parts for and I don't know how to mod consoles
My IPS modded gba worked fine for a week! Until the pixels started bleeding... i asked funnyplaying for a solution but ordered a new screen anyways so i have a spare one in case this would happen again... still have no clue how it happened 😅 i always take care of my stuff
I tried to mod my gba a while ago. First i couldn’t fix the speaker, i even installed a new one and it didn’t work. I think it was the headphone jack. The i replaced the screen and now it won’t turn on
Did you install a ips screen? (Might be possible that you have a 40 pin model and have to desolder C54 in order for it to work) or it might Just be the ribbon cable that is not inserted correctly
@@basboerlage4766 i just tried it again and it actually does turn on but it freezes when it gets to the game. Some games will show a glitchy screen some don’t show anything
I’ve said it on other vids but I’ll say it again here: this man has carried me through my modding journey, and has never steered me wrong. 8 GBC/GBA/SPs later, just want to say thanks!
I was able to mod my first GBA with this guide, thanks!
I’ve modded 4 GBA’s, 2 successes, 2 failures 😅 my dream GBA is a wide AGB model with a SP 101 screen but I don’t trust myself to do the mod and I can barely find anyone talking about how to do that online 😢
I have the Latias Latios console with a 101 screen in it, my BABY
Whats the difference in the "wide agb" model?
@@rudolphgreen2641 Wide and AGB both describe the game boy advance model I’m talking about, which is the first one Nintendo released.
Man, if you can get an ips screen, I highly recommend it even if you have to trim a bit. But if you're going for that look, I got a knock off Halo Light back in the day that was better the original Halo Light, and my screen looked pretty close to my cousins SP screen. Maybe you can order one of those and use some parts from it for a screen brightness slider, and fits it all in the battery compartment! Then you would just need wires from the dial to the screen.
Just an idea I thought of.
Good job Jake.
I really enjoyed your his video.
I’ve done 3 so far and now I’m starting to understand the shell issues.😂
I’ve sold one so far and plan on making more.
I do this as a hobby and also cause I enjoy games/gaming.
Keep up the good work.
I installed this mod on 2gbas and noticed that it buzzes pretty badly. After some measuring figured its high amp draw that the GBA cant handle well. To fix it you can squeeze in another 1000uF cap at CP2 to remove audio noise and one directly at the speaker (SP1).
I have a moded GBA with a Ips V2 and i love it
Which you consider is the best the display for the GBA?
Thank you so much! I personally prefer the V2 but I also like the V5 a lot
@JakeSimmons Thank you
I guess for my second mod, I'll go with Hispeedo V2, no clean juice battery, just straight regular batteries 👌🏻
Awesome video btw
I modded two gba’s back in 2019, added ags 101 screens to them. Just recently I took one of those and added a funny playing ips 3.0 and a usb c battery pack. Your previous videos helped Jake, thanks! Wish I had more reasons to mod more cuz it’s a lot of fun.
Been looking forward to this video! Very in-depth, well done! I've had the parts for my GBA mod for a while now, but haven't gotten a chance to put it together yet. This video will definitely come in handy when I do have time to do the mod!
I want to mod my old GBA not just to have a new shell and screen but to also make it USB-C chargeable and run ROMS as well as game cartridges. Any tips where to start?
hey bro do i have to ground myself when i'm working on gameboys or psps, i'm getting into this for the first time and I just want to make sure i don’t mess up my psp
I’ve never once grounded myself for any of this and do it on thick carpet but never once had a problem. I don’t think it would be an issue but if it makes you nervous it’s not gonna hurt anything to ground yourself
This is really awesome! I might eventually just buy one of the modded gbas you are selling on the website since I don't have a gba laying around.
Instructions unclear, got gameboy stuck in dishwasher, will it still turn on
Those printed shells that came bundled with boxes seem to have disappeared from AliExpress. Any idea where I can get them?
Are those non laminated shells useable with the battery mod from funny playing ? Without needing to remove some plastic part in the back I mean
Its possible to add a bettery?
Hey people, hopefully someone can help me. Iam new at GBA modding and I have the same problems again and again: When I added a new case and new buttons, first, the shoulder buttons are not so "clicky" anymore (its stressful to click on them, it doesn't feel well) and the D-pad is also harder to click as the original buttons. You need more power to get a result. That leads to strained fingers. As a solution, I always switch to the original buttons again but they aren't really good looking in a golden or transparent case. Do you have some ideas to prevent this issues? Also I bought many sets of buttons and shoulder buttons from ebay. Its always the same, I dont know why. :(
I have a gba that i got at a garage sale that wasn’t working because of the power switch so i took it apart and cleaned it with 99% alcohol and gave it a gentle but good cleaning and it powered on. My guess is that it just got buildup of dirt and grime that made the contacts stop working
I actually just posted a video yesterday on a GBA and I linked your channel because you are so knowledgeable when it comes to gameboy modding. Unfortunately when I ordered my shell and screen kit I didn’t do enough research beforehand and had to trim the shell and it was a nightmare! 😅 but I hope others will learn from my mistake that I pointed out and hopefully people will consult your videos before they make an order lol
Hey I just got a GBA SP Pikachu Edition AGS-001 with cherry red buttons and triggers. Is this a real GBA or did get scammed?
modded my first GBA thanks to this. It looks perfect and works great, thank you so much!
I don't know if you could answer this since you don't have a magic 8 ball but is there a way to make an educated guess on when/if oled displays for the GBA will be available?
I’ve noticed 2023 V5 IPSs on AliExpress what’s the difference?
Hello, what screen mod replicates the LCD grid the best? That’s literally the only thing I’d like on a GBA modern screen. Thank you
I know the mods always come with wires to connect the components to the ribbon cable but I lost one so would you be able to let me know the size or kind of wire I need connect the components ?
I use 30 AWG wire but really anything will work as long as there is space for it
@@JakeSimmons really appreciate the reply thank you !
Honestly I was kinda hoping for a new gba video even tho your most recent one isn't even that old, I just found my old original gba I had when I was a kid and i wanna restore it properly, this will help alot man 🙏
Edit: the ips kit doesn't show the 3 red wires yours comes with, is the listing just not updated or are you using a different kit? still have one ordered but wasn't sure if id need to source my own wires from my own stash lol
Unrelated to the great video, but: my 101 gba sp has a very low soublnd volume. I've read on the net that it might be a capacitor (cp1) gone bad. How can I make sure that's the case? Also, how to properly clean the power switch and volume wheel?
Most likely a cap replacement would fix your sound issue. Unless your volume slider is visibly rusty or something, it’s gonna be the capacitor. There is a link in this description for my short on how to clean your power switch. For volume wheels just put alcohol on it and scroll back and forth very fast for like 30 seconds and finish by blowing it with canned air to knock out any dust or debris
@@JakeSimmons cheers mate
Great video! Can you do another video where you add the sound and battery mod? :)
Can you make a tutorial on the 2ds lite? It's an unhinged DS lite made by someone named bozmodz that you can 3d print the parts for and I don't know how to mod consoles
you got the same blue soldering mat that i got yesterday in the mail, what a coincidence
How long does 2 x AA Battery last ? :-)
Which kit would you recommend the v2 or the v5 laminted
I've never gotten the chance to own a gameboy advance. Maybe some day I will be able to afford one and enjoy what so many people say is so much fun.
I got mine in 2004. Back then they were still new and not ridiculously overpriced.
My IPS modded gba worked fine for a week! Until the pixels started bleeding... i asked funnyplaying for a solution but ordered a new screen anyways so i have a spare one in case this would happen again... still have no clue how it happened 😅 i always take care of my stuff
31:24 the print lines ruin it for me
I tried to mod my gba a while ago. First i couldn’t fix the speaker, i even installed a new one and it didn’t work. I think it was the headphone jack. The i replaced the screen and now it won’t turn on
Did you install a ips screen? (Might be possible that you have a 40 pin model and have to desolder C54 in order for it to work) or it might Just be the ribbon cable that is not inserted correctly
@@basboerlage4766 i think it was an ips screen
@@HoneyMike and is it a 40 pin model?
@@basboerlage4766 i had to check and it is a 40 pin
@@basboerlage4766 i just tried it again and it actually does turn on but it freezes when it gets to the game. Some games will show a glitchy screen some don’t show anything
any hope for an oled gba soon?
I have the Charmeleon version of that shell!
Any OLED option?
I wouldn’t expect one any time soon
i feel like everyone hates that clear pink launch shell lmao
I just bought a fuchsia pink gba cuz I thought it looked cool! Haha maybe they aren’t popular 🤷🏻♂️
I have that exact shell of charmander
Man, I don’t even own a handheld console. 💀 I love this though
I prefer the classic for the more authentic feel but not with a fucked up screen and shell
hi love vid
where's my name on the end
Do people really complain about soldering? 🤔
Another video ^-^
Theres no way bro forgot to show how to put power button in...
Now i am sitting with no power button and cant get the screw out. yay thanks a lot... fastest way to get unsubbed
it aint ever that difficult 😭😭
Man says it’s easy and now I just break 100 dollars of stuff, thanks. I should have bought the drop in laminated one.
skill issue 🤷♂️
It's yourself you got to thank 😂😂😂😂
I must have bought the absolute worst kit on amazon, because all this did was brick my GBA
hi
MY NAME IS NOT AT THE END
Probably because I exported the video before you joined. You will be on the next one