I am NOT at Wes`s level, but I can tell you, putting something together, after you took it apart successfully, is not that hard, taking something apart when you do not have a manual, or have never seen a similar machine, is HARD, it is also exceedingly hard to put something together that someone else took apart.
I’ve never understood RUclipsrs, especially people like Wes, thanking the viewers for watching. I was really struck by his outro because what was delivered was two long form pieces of content about an expert diagnosing and repairing a piece of equipment, which is incredibly valuable to the unknowing. This kind of expertise is paid for, not recorded on video, then edited by the expert(another quantity of labor which is much appreciated), and delivered to the viewer for free at their convenience. Thank you Wes, for taking all of the time you do to accommodate the camera, and editing. I’ve learned a lot about diagnostics from you as a generator technician and appreciate your presence more than any “mentor” I have in my field.
Well there's no point making the video if no one watches it. Asking people to give you their time is asking them to give you the most important thing they have.
Hey Dean - I'm coming up on a quarter century with The Company Formerly Known as Bell of Pennsylvania and gave some thought to undertaking Career Number Two as a machinist after I retire. Have you come across others with similar aspirations/levels of mental illness? Haha Is training even offered anymore for the old school (non CNC) methods, tool use, etc? I'd love to hear any thoughts, advice, or insults you might have... :P
As a person with a decent level of understanding of mechanics. Believe me when I say this man is a genius. The level of competence in so many fields is very impressive.
Well he is, in fact, a mechanical engineer. Combine that with years of shop and field experience and you have yourself a true jack of all trades. Even when "he doesn't know what he's doing" he makes it look like he's an expert.
You really take pride in your projects, it shows how much you care about what you are doing when you take your time to make sure that everything is done proper
or "I know I bought 4 of these but I only remember using one! I can't for the life of me find the other 3!". "OK, I bought another 4 pack, where should I put the 3 for later? How about right here... next to the 3 I couldn't find before."
@@Steve_Just_Steve Calm down Steve. Play back the video at 5:10 and listen to Wes say, “have I mentioned recently that I don’t know what I am doing?”. I have been watching Wes work for many years and I’m a big fan. One of his many redeeming qualities is that he is very humble and not ashamed to make mistakes with the camera running. We love watching him because he’s human and therefore he makes a few mistakes. All glory goes to God!
40+ hours or not, you now have a functional milling machine at a fraction of the cost of what a new one would cost! As long as it serves the purpose, who cares how "pretty" it is! Kudos to your talents bro'!
*Thank You* for the time you put into filming, editing and publishing these videos for our entertainment and education. They are greatly appreciated Wes, very greatly appreciated!! 👍👍👍
It's actually one of the reasons your channel so dang interesting, the content is never dull, always something new. In my career I've been around mils and lathes and welders and guys that could make or repair some pretty complex stuff. I think you're e right up there with them. Fine job Mr. W
Paint? Who needs paint? As long as it works it's pretty to me. Great work Wes, you have increased your shop's floors' ability to not move in case of a tornado and that is well worth the price.
I came here 2 years ago for a Mack R video, now I'm absolutely fascinated with every project you do. From milling machines, to welders, to ATVs, I love listening to you explain the process. Keep up the good work, Wes. Thank you for all you do.
I have that same milling machine I think mine is a slightly newer model and is in a little better shape but it has started to make a chattering noise when coming up to speed and the quill is getting stiff. I’ve been scared to take it apart and now I’m even more scared I didn’t realize how complicated that head is inside.
@@WatchWesWork how is that Mack doing? Will there be any new videos about it? I don't remember the model, except it's a white truck and I think it's used as a grain hauler
You are very skilled with the fine fitment and the grease! It'll probably outlive us all, now. Nice rebuild! Yeah my channel viewership is pretty low as well but, unlike you, it's probably just due to me making boring content that nobody is interested in rather than any algorithm confusion, lol.
I was a machinist back in the day and this video brings me back a few years of my life. I like your content, it shows you’re ability that nothing un repairable if you have the time.
It breaks my heart when you see decent quality machines thrown onto the scrap heap , because certain people do not see the potential of spending time and effort to bring them back to life . Well done .
If you had to pay someone to fix that it'd cost a fortune. Just labor alone would be thousands of dollars. Then you still just have an old machine. So it comes down to pretty simple economics. It ain't worth it to fix it. But if you're doing it yourself and you can and you enjoy the process then maybe it is.
"I was gonna paint it... then i didn't." I'm with you. Amazing skills, respect for what you have done and what you can achieve. Thanks for taking teh time to video, edit and share.
Wes, in my opinion what you have done is nothing less than spectacular, the complexity of that machine and the amount of parts that it took to disassemble and assemble spun my head, and I am a retired Copier technician where there are hundreds of parts on copiers. What a Job well done, rock on dude.
I love that you made these videos, thanks for the work you put into it. I started watching you when you were doing CNC troubleshooting, you demystified a lot of black magic for me (came for the machine troubleshooting, stayed for the sardonic humour). It's great to see you briefly return to it, sorry if RUclips punishes you for it.
I love watching this type of content from you, Wes. You're a great machinist, with a fantastic problem solving head on your shoulders - a good reference to "if there is a will, there is a way" - who needs parts off a shelf. Your boy has an amazing role model in you, and I hope he absorbs all that you have to teach him when the time comes.
MAN! Pretty soon this channel’s gonna have to be renamed “Watch Wes Rule the World”!! When you got the machine up and running I was so proud I even started dancing a jig and singing your praises! Bards might even someday pay for their meals at pubs by singing “that old song about Wes, the Master of the Universe*” Cheers, great job and maybe my entry will earn you some extra points with the ol’ lady for ya! 🖖😎👍 * Of destroyed old shop equipment 😊
Everything you do is interesting to watch. I don't think I've ever seen one man accomplish so much all by himself. You keep making the videos... I'll keep watching and being impressed every time. Best to you and your family.
I find these videos incredibly interesting. It does not cease to amaze me how you manage to completely disassemble industrial tools like this while keeping track of where everything goes, what everything does, topped off by putting it back together correctly.
This is why I love this channel. I am by far nowhere near and never will be at this level of skill, expertise, and patience. However, I do like to get into a little bit of everything. Not all of us are like "SQUIRREL!!" but some of us like variety. This is where it is at.
You are an amazing problem solver and craftman, Wes. The addition of the milling machine will only make you more capable of solving problems and fixing things. Well done. We need to rethink "what its worth." If you had to buy a new one, how much would that be worth? It works. It does what you need it to do. It is worth what a working machine is worth. It is worth the work it will do for you, and the capabilities it gives you. I doubt you could buy a new machine or a rebuilt machine for 30 hours of work. It really doesn't matter what someone else is willing to pay for it, unless you plan to sell it. It matters whether it will be useful to you and/or make you money. Have you thought about reaching out to Keith Rucker, or going to Arnfest for tools?
@@WatchWesWork Well, you came in under that, didn't you? With inflation as it is, I doubt that is the price now. And you came out knowing that head inside, outside, backwards and forwards, so the next time it needs something, you should be able to figure it out pretty quickly.
You have that extremely rare "touch of love" that only a few "mechanics " ever seem to achieve that only comes with a true passion for your chosen endeavors, brought on by decades of repairing everything from a 1908 "whatcamacallit" to a late model Mercedes Benz and everything in between. I am jealous of your tools, let alone your massive skill set. I sincerely hope that your son takes after you, talent such as yours needs to be mentored and passed along.
I know nothing about machine tools, but it was really interesting watching you work through the problems on this machine. Your one smart guy working out all the issues
The 3d pointer knob is the best part of the machine! This project was very impressive and I enjoyed watching it. Great work Wes! Perhaps a new name for your channel: “Great Work Wes” lol, cheers!
it's always refreshing and comforting to watch an older machine be rebuilt, get some new parts and put back into service. truck, tractor, heavy equioment, tools, anything. thanks Wes.
If its mechanical or electrical and you fault find and fix then I'll watch it, its all great content to me! Thanks for taking the time to film and upload it Wes.
Love your content Wes. My dad was an engineer. We lived on a farm and my dad could make and repair anything. He had a complete machine shop by the house and I was constantly by his side watching. If he needed something and couldn’t afford it, he made it. I did not follow his lead. I became a lawyer, but I’m amazed by how much I learned from him and worked into my hobbies. I can weld, run a lathe and milling machine among other things. I inherited the farm and machine shop and still use it. Keep up with your current content. It reminds me of my dad.
Enjoyed the rebuild. Came here originally for the machining and machine moves etc, stayed for the automotive content (which is also excellent) and here we are full circle rebuilding machine tools again. Great stuff! keep it up Wes. Hope you and family are all well.
Been honest I voted not to have machine videos but I absolutely loved it, getting a peak into the older workings of them machines is great. Good job hope to see more soon👍👍
Having it functional is more important than painting it. Though painting it would complete the package! A video on repairing the hydraulic ram on the fork lift will be a great video Wes. It is great seeing a young fella repair stuff & not throw away. Old does not mean obsolete. Old machinery can be just as accurate as the new stuff - possibly more challenging to operate, but very accurate nonetheless and very long lasting!
Now how in the Double HH hell did you figure out how to put all that back together ?? For a young man you have an impressive and admirable background and wealth of knowledge. You have got to be a bit proud and deservedly so. So interesting to watch
He has worked as a machine tool service man .... Personally i would be able to remember how things (and now adays i have a phone with a good camera in the pocket, photos from the disassembly is worth a lot) was put together but seeing how to do something takes either education from a knowledgeable fitter or experience.
To be honest, I didn't even know what kind of machine it was in the beginning but that doesn't matter. Always fun to see you do what you do best, taking things apart and putting them back together. Skills like that become rare... please keep them coming
I'm in my second week of owning a 3D printer and am really starting to enjoy it. I have only printed files I've found so far, as my CAD skills are about as basic as it gets. I need to put in some hours getting better so I can start printing all the one-off custom solutions I have in my head. Ironically enough, my brother does CAD professionally, but he's only interesting in helping (for free) if it takes less than an hour or so 😂
Ever since I was a kid, I've had an interest in all things mechanical, so the tractor videos,as well as the snow plows or medium duty truck content goes far above my 38 plus years in the auto field. To see a mill torn down and repaired competently, with detail and explanations.... literally amazing to watch. I was waiting for the 'I wish I had a mill' comment I figured was coming, and wasn't disappointed 😅. For someone who 'doesn't know what you're doing ' you fix a great deal of stuff, and teach many along the way...well done,sir.
Man, I remember your machine videos from wayyyyyyyy back. I was super excited to see a new machine video on the channel. The patina on the head is perfect.
That was amazing Wes, nice job. It was a heavy price to pay to get it there but I think it was worth it in the end, plus it gives us all some interesting content to watch.😁
Absolutely impressive how you not only repaired and made your own parts, but remembered how it all went back together.
I am NOT at Wes`s level, but I can tell you, putting something together, after you took it apart successfully, is not that hard, taking something apart when you do not have a manual, or have never seen a similar machine, is HARD, it is also exceedingly hard to put something together that someone else took apart.
It's just nuts and bolts. But thank you!
@@WatchWesWork To you "It's just nuts and bolts"...
...to us, it's *mojo* in action... XD
A lot and lot tape
There are pdf manuals of the brand name Bridgeport available. Not exactly the same, but same jist.
I’ve never understood RUclipsrs, especially people like Wes, thanking the viewers for watching. I was really struck by his outro because what was delivered was two long form pieces of content about an expert diagnosing and repairing a piece of equipment, which is incredibly valuable to the unknowing. This kind of expertise is paid for, not recorded on video, then edited by the expert(another quantity of labor which is much appreciated), and delivered to the viewer for free at their convenience. Thank you Wes, for taking all of the time you do to accommodate the camera, and editing. I’ve learned a lot about diagnostics from you as a generator technician and appreciate your presence more than any “mentor” I have in my field.
Well there's no point making the video if no one watches it. Asking people to give you their time is asking them to give you the most important thing they have.
@@WatchWesWork that exchange is mutual. Thank you.
Well done Wes!
Don’t paint it, use it, I hope it makes some money for you!
Cheers from Tokyo!
@@WatchWesWork You could ask for kidneys instead!
@@lastguy8613 WTF????????
I was an aerospace machinist for near 50 years, I would hire you in a heartbeat. I'm impressed at your skill level.
Amen and ditto (only 40 years) !!!
Hey Dean - I'm coming up on a quarter century with The Company Formerly Known as Bell of Pennsylvania and gave some thought to undertaking Career Number Two as a machinist after I retire. Have you come across others with similar aspirations/levels of mental illness? Haha Is training even offered anymore for the old school (non CNC) methods, tool use, etc? I'd love to hear any thoughts, advice, or insults you might have... :P
Guys , he’s a graduate Mechanical Engineer . Engineers rock !
Don't let him fool you, he's got A LOT of machine tool repair experience. Just go WAY back in his library to see for yourself.
@@dondallman3933 Me too.
At this point, I'm pretty damn sure this guy can fix anything. Really impressive.
Except his own bucket-o-rust RAV4... ;-)
As a person with a decent level of understanding of mechanics. Believe me when I say this man is a genius. The level of competence in so many fields is very impressive.
Its like what cant he do??
I think he (it) is an android, the real Wes was hit by a crop duster and taken away...
Well he is, in fact, a mechanical engineer. Combine that with years of shop and field experience and you have yourself a true jack of all trades. Even when "he doesn't know what he's doing" he makes it look like he's an expert.
This is how people are built in the midwest once you get 45 min out of the worthless cities.
I agree don't think there is much of anything he can't do
Leave it just the way it is, it shows the history of the machine.
I got to believe there's nothing Wes can't fix...
Chuck Norris calls Wes when stuff needs fixing
@@grusin83 awesome.
Snow Plows.....
You really take pride in your projects, it shows how much you care about what you are doing when you take your time to make sure that everything is done proper
Ordering a replacement part for the one you lost is the fastest way I've found to make the original one re-materialize.
Ahh, a Fellow Been There, 17:50 Had that done to Me, ALUMNI...
I believe that is paragraph 3 of Murphy's Law
or "I know I bought 4 of these but I only remember using one! I can't for the life of me find the other 3!". "OK, I bought another 4 pack, where should I put the 3 for later? How about right here... next to the 3 I couldn't find before."
@@MichaelSteeves Yep, I have done that with some very difficult to find specialty bolts and for the life of me I never find them
^^^^thats thetruth right there!
I myself am an automotive mechanic and machinist so I enjoy all of your videos thsnk you for the entertainment 🙏
Not bad for a guy who doesn’t know what he’s doing! Nice work Wes! This was a pleasure to watch.
Don't let him fool you, he's got A LOT of machine tool repair experience. Just go WAY back in his library to see for yourself.
@@Steve_Just_Steve Calm down Steve. Play back the video at 5:10 and listen to Wes say, “have I mentioned recently that I don’t know what I am doing?”. I have been watching Wes work for many years and I’m a big fan. One of his many redeeming qualities is that he is very humble and not ashamed to make mistakes with the camera running. We love watching him because he’s human and therefore he makes a few mistakes. All glory goes to God!
Remember the video when he almost ran over himself?
@@robmut1357 sure do! That was way too real! Very scary!
@@gs1100ed Your last name must be Lebowski, Jeff because I am certainly "Calmer than you are Dude".
Them gray and orange wire Snap connectors are nice @Watch Wes Work
40+ hours or not, you now have a functional milling machine at a fraction of the cost of what a new one would cost! As long as it serves the purpose, who cares how "pretty" it is! Kudos to your talents bro'!
Wes you are a true genius you have what it takes to do anything you want to. I hope your wife is super proud of you. You have my utmost respect.
Your ability to keep the grease going into the part - rather than everywhere - is amazing. I am jealous.
This is some advanced mechanical wizardry. 🤯
Awsome addition to the shop.
*Thank You* for the time you put into filming, editing and publishing these videos for our entertainment and education. They are greatly appreciated Wes, very greatly appreciated!! 👍👍👍
Not to shabby on the milling after repairs looks pretty true
It's actually one of the reasons your channel so dang interesting, the content is never dull, always something new. In my career I've been around mils and lathes and welders and guys that could make or repair some pretty complex stuff. I think you're e right up there with them. Fine job Mr. W
From Boat Anchor to Functional Machine...Thanks, Wes...(Saved Another Item From Scrap)...
Paint? Who needs paint? As long as it works it's pretty to me. Great work Wes, you have increased your shop's floors' ability to not move in case of a tornado and that is well worth the price.
Definitely missed these videos love the Montague and the classical music @Watch Wes Work
I came here 2 years ago for a Mack R video, now I'm absolutely fascinated with every project you do. From milling machines, to welders, to ATVs, I love listening to you explain the process. Keep up the good work, Wes. Thank you for all you do.
Thanks for sticking around.
I have that same milling machine I think mine is a slightly newer model and is in a little better shape but it has started to make a chattering noise when coming up to speed and the quill is getting stiff. I’ve been scared to take it apart and now I’m even more scared I didn’t realize how complicated that head is inside.
Thankyou 👍
@@WatchWesWork my husband and I have been enjoying your videos for years.
@@WatchWesWork how is that Mack doing? Will there be any new videos about it? I don't remember the model, except it's a white truck and I think it's used as a grain hauler
You are very skilled with the fine fitment and the grease! It'll probably outlive us all, now. Nice rebuild! Yeah my channel viewership is pretty low as well but, unlike you, it's probably just due to me making boring content that nobody is interested in rather than any algorithm confusion, lol.
For a guy that don't know what he's doing, I would say you have an insane amount of beginners luck :)
Good job Wes.
Don't let him fool you, he's got A LOT of machine tool repair experience. Just go WAY back in his library to see for yourself.
Nothing costs more than that free stuff.
I think most everyone who knew how to rebuild that head is no longer with us. Nice job.
Pretty certain Barry at H&W Machine Repair is still topside...
Yeah H&W rebuild them. Lagun also has a rebuild service in California.
Besmer Machinery Repairs is active
If I remember correctly, Wes said this machine is from the late 1980s, that's kinda long ago but not like a lifetime.
@@Ragnar8504 The 80s is coming up on a lifetime ago now. A generation is 42 years.
As a retired machinist, I was happy to watch this video. We need more old school lever pullers.
I was a machinist back in the day and this video brings me back a few years of my life. I like your content, it shows you’re ability that nothing un repairable if you have the time.
It breaks my heart when you see decent quality machines thrown onto the scrap heap , because certain people do not see the potential of spending time and effort to bring them back to life . Well done .
If you had to pay someone to fix that it'd cost a fortune. Just labor alone would be thousands of dollars. Then you still just have an old machine. So it comes down to pretty simple economics. It ain't worth it to fix it. But if you're doing it yourself and you can and you enjoy the process then maybe it is.
I have no idea how you got that back together. Good job Wes.
It's just a machine.
"I was gonna paint it... then i didn't."
I'm with you.
Amazing skills, respect for what you have done and what you can achieve.
Thanks for taking teh time to video, edit and share.
You always amaze me wit your ability to repair items like that.
Any content from you is worth watching…quality counts 🚚👌🤔🇺🇦👍🇺🇦👍
Thoroughly enjoyed the milling machine head rebuild. Hope there are more like it in the future.
Wes, you never ceases to amaze me. Watch Wes the Wizard Work! Mechanical, electrical, hydraulic, so, why not 3D printing?
If the world ever ends.... as long as Wes says "It'll be fine-" then I'll believe it.
I can appreciate somebody who does machine work with a club hammer !
i started watching you for the machine rebuilding, im glad you did this, i wish you had more, thank you Wes
Congratulation, on your newly refurbished milling machine, you simply amaze me each time you take on something new.
Wes, in my opinion what you have done is nothing less than spectacular, the complexity of that machine and the amount of parts that it took to disassemble and assemble spun my head, and I am a retired Copier technician where there are hundreds of parts on copiers. What a Job well done, rock on dude.
old equipment works new fancy equipment is outrageous
I love that you made these videos, thanks for the work you put into it. I started watching you when you were doing CNC troubleshooting, you demystified a lot of black magic for me (came for the machine troubleshooting, stayed for the sardonic humour). It's great to see you briefly return to it, sorry if RUclips punishes you for it.
I love watching this type of content from you, Wes. You're a great machinist, with a fantastic problem solving head on your shoulders - a good reference to "if there is a will, there is a way" - who needs parts off a shelf. Your boy has an amazing role model in you, and I hope he absorbs all that you have to teach him when the time comes.
Loved the rebuild. And if you only have 30 to 40 hours into it, I'm amazed. I would probably have had 200 LOL
MAN! Pretty soon this channel’s gonna have to be renamed “Watch Wes Rule the World”!! When you got the machine up and running I was so proud I even started dancing a jig and singing your praises! Bards might even someday pay for their meals at pubs by singing “that old song about Wes, the Master of the Universe*”
Cheers, great job and maybe my entry will earn you some extra points with the ol’ lady for ya!
🖖😎👍
* Of destroyed old shop equipment 😊
We enjoy every minute, Wes. Keep 'em coming!
Holding down the concrete, you’ve got to love it. Good Job Wes.
It is nice to see people like your self saving these tools which last forever if looked after .Two thumbs up Wes .
For someone who ' does'nt know what he's doin' you're pretty smart and a delight to follow, very entertaining. Thanks for the inspiration.
Everything you do is interesting to watch. I don't think I've ever seen one man accomplish so much all by himself. You keep making the videos... I'll keep watching and being impressed every time. Best to you and your family.
Supernice, great job
I find these videos incredibly interesting. It does not cease to amaze me how you manage to completely disassemble industrial tools like this while keeping track of where everything goes, what everything does, topped off by putting it back together correctly.
This is why I love this channel. I am by far nowhere near and never will be at this level of skill, expertise, and patience. However, I do like to get into a little bit of everything. Not all of us are like "SQUIRREL!!" but some of us like variety. This is where it is at.
Nice work Wes.
I think that old machine are worth the trouble repairing.
Thank you for the content. I enjoy watching your videos.
Enthralling is the way i would describe your videos . Your skill and and humour are without doubt the reason we watch you . Sir i salute you
You are an amazing problem solver and craftman, Wes. The addition of the milling machine will only make you more capable of solving problems and fixing things. Well done. We need to rethink "what its worth." If you had to buy a new one, how much would that be worth? It works. It does what you need it to do. It is worth what a working machine is worth. It is worth the work it will do for you, and the capabilities it gives you. I doubt you could buy a new machine or a rebuilt machine for 30 hours of work. It really doesn't matter what someone else is willing to pay for it, unless you plan to sell it. It matters whether it will be useful to you and/or make you money.
Have you thought about reaching out to Keith Rucker, or going to Arnfest for tools?
I have not checked recently, but you used to be able to buy a whole head for about $5000.
@@WatchWesWork Well, you came in under that, didn't you? With inflation as it is, I doubt that is the price now. And you came out knowing that head inside, outside, backwards and forwards, so the next time it needs something, you should be able to figure it out pretty quickly.
@@thirzapeevey2395 I only spent about $400 on parts plus my time, which could be anywhere from free to who knows how much.
@@WatchWesWork Your time isn't free, but I doubt it is over $150 an hour, so you came out ahead.
Machine tool fixing is what brought to your channel in the early days!
You have that extremely rare "touch of love" that only a few "mechanics " ever seem to achieve that only comes with a true passion for your chosen endeavors, brought on by decades of repairing everything from a 1908 "whatcamacallit" to a late model Mercedes Benz and everything in between. I am jealous of your tools, let alone your massive skill set. I sincerely hope that your son takes after you, talent such as yours needs to be mentored and passed along.
I've got a touch of something, that's for sure...
@@WatchWesWork Growing up on a farm WITH a built-in machine repair shop wasn't detrimental in any way.
I know nothing about machine tools, but it was really interesting watching you work through the problems on this machine. Your one smart guy working out all the issues
The 3d pointer knob is the best part of the machine! This project was very impressive and I enjoyed watching it. Great work Wes! Perhaps a new name for your channel: “Great Work Wes” lol, cheers!
Great job getting that old boy working again, and wouldn't worry about paint looks good as is👍.
I'm blown away! Where did Wes learn all these machine tool skills.
Before his current job he serviced cnc machines.
Watch his 1st videos
My dad has a repair/machine shop. I grew up working on these machines.
Thank you Wes , My comment is that I like your videos no matter what the content
and I love to watch Wes work and the chit chat is a bonus.
Always love the interesting project's you bring to us. 🤘
it's always refreshing and comforting to watch an older machine be rebuilt, get some new parts and put back into service. truck, tractor, heavy equioment, tools, anything. thanks Wes.
If its mechanical or electrical and you fault find and fix then I'll watch it, its all great content to me! Thanks for taking the time to film and upload it Wes.
Some super detailed Milling right there wow that part is tiny @18:00 @Watch Wes Work
Sweet! Watching this machine make chips again was SO satisfying. Well done as always Wes ! Respect.
Love your content Wes. My dad was an engineer. We lived on a farm and my dad could make and repair anything. He had a complete machine shop by the house and I was constantly by his side watching. If he needed something and couldn’t afford it, he made it. I did not follow his lead. I became a lawyer, but I’m amazed by how much I learned from him and worked into my hobbies. I can weld, run a lathe and milling machine among other things. I inherited the farm and machine shop and still use it. Keep up with your current content. It reminds me of my dad.
Enjoyed the rebuild. Came here originally for the machining and machine moves etc, stayed for the automotive content (which is also excellent) and here we are full circle rebuilding machine tools again. Great stuff! keep it up Wes. Hope you and family are all well.
If I wore a hat I would tip it to you sir. Your engineering skills are impressive.
Amazing job! Anybody could take it apart and only very few can put back together. You are one of the very few!
Been honest I voted not to have machine videos but I absolutely loved it, getting a peak into the older workings of them machines is great. Good job hope to see more soon👍👍
Another great program. Loved all the problem solving. A good piece of machinery back in use . Keep up the content your fun to watch.
Having it functional is more important than painting it. Though painting it would complete the package!
A video on repairing the hydraulic ram on the fork lift will be a great video Wes. It is great seeing a young fella repair stuff & not throw away. Old does not mean obsolete. Old machinery can be just as accurate as the new stuff - possibly more challenging to operate, but very accurate nonetheless and very long lasting!
Love everything you do, changing up the content keeps us guessing what’s next.
Pretty cool!
Your timelapse music near the start was absolutely perfect!
Thanks for sharing 🇨🇦
Lisle tap sockets come in super hand for tight spaces when taping @Watch Wes Work
It was great watching old iron brought back to life. Thanks Wes!
Nicely done Wes, great work to resurrect an old relic to live on another day
Nice job wes...you did a exceptional job
Again. Absolutely awesome in the way the mechanics are always in the move in our world no matter if it's 100 years old or not
Now how in the Double HH hell did you figure out how to put all that back together ??
For a young man you have an impressive and admirable background and wealth of knowledge. You have got to be a bit proud and deservedly so. So interesting to watch
He has worked as a machine tool service man ....
Personally i would be able to remember how things (and now adays i have a phone with a good camera in the pocket, photos from the disassembly is worth a lot) was put together but seeing how to do something takes either education from a knowledgeable fitter or experience.
To be honest, I didn't even know what kind of machine it was in the beginning but that doesn't matter. Always fun to see you do what you do best, taking things apart and putting them back together. Skills like that become rare... please keep them coming
I'm in my second week of owning a 3D printer and am really starting to enjoy it. I have only printed files I've found so far, as my CAD skills are about as basic as it gets. I need to put in some hours getting better so I can start printing all the one-off custom solutions I have in my head. Ironically enough, my brother does CAD professionally, but he's only interesting in helping (for free) if it takes less than an hour or so 😂
Tinkercad is a good place to start.
Nice job Wes, better working in your shop than gone for scrap - thank you for the great content.
It was great seeing you work on the mill it's good seeing you showing you work on stuff like you did near your start of your youtube venture
Ever since I was a kid, I've had an interest in all things mechanical, so the tractor videos,as well as the snow plows or medium duty truck content goes far above my 38 plus years in the auto field. To see a mill torn down and repaired competently, with detail and explanations.... literally amazing to watch. I was waiting for the 'I wish I had a mill' comment I figured was coming, and wasn't disappointed 😅. For someone who 'doesn't know what you're doing ' you fix a great deal of stuff, and teach many along the way...well done,sir.
I enjoy watching a man that has accumulated a wealth of knowledge and experience and uses it and most importantly shares it . Thank you 😊
He is very knowledgeable about all types of mechanical things.
Man, I remember your machine videos from wayyyyyyyy back. I was super excited to see a new machine video on the channel. The patina on the head is perfect.
Pat your self on the back Wes we thoroughly enjoyed it, and you have the patience of a saint., from Surrey UK
That was amazing Wes, nice job.
It was a heavy price to pay to get it there but I think it was worth it in the end, plus it gives us all some interesting content to watch.😁
Very impressive
You are a genius Wes. You can take apart & put back together & FIX most anything. Thanks for the time & talent. It’s a pleasure watching you work.
Bravo! I was amazed you even knew names of these parts let alone what the hell they did or how to fix them. This is what made America great.
Nicely done sir. You have every right to be happy with the results. The bonus....that puppy WORKS.
I admire your multiple skills even if Max isn't impressed.
Good job wes!!! I've been watching you for about three yrs.really enjoy your content!!! You are a true mechanical engneer!!!!