Hello Wes, I’m not a professional comments writer; in fact, I don’t speak English very often, as I’m from a little post soviet country, but I like to watch your videos, because they’re about finding the solution for unsolvable (sometimes) problems. I just wanted to thank you for the great content you make, and wish you and your family the best
Your English is excellent. Your comment was at a higher reading level than most native English speaker. Don't be afraid to comment anytime in English..
Wes: I got about 12 hours into this job, it's just difficult to find that much time to work on a single project... Me: I tell you what's even more difficult to find.... A machine shop in the middle of a corn field and a machinist who is willing to work on a corn auger for 12 hours... Good professional factory repair Wes, awesome video and content.
Thanks Wes. I worked on grain bins, augers, belt elevators, etc. about 25 years ago as a summer/weekend job. I can attest that rotting grain is enough to gag a maggot, every single piece is always rusted, oblong, wallowed, broken, and mostly designed to never come off, and that no auger has ever been repaired willingly and without a blood sacrifice. Thanks for the memories. Working that job made me drop pre-med to go into engineering. I mostly hate people, so I think the world is a better place because of that.
It always amazes me at how many man hours you put into these project to make them workable. Its even more amazing when I have to assume you give an equal time to editing these videos and give us content every week aside from your family life. BTW, I'm pretty sure I saw Max's picture on the ASPCA mail I got last week. Well done and thanks Wes!
Wes, I'd like to pass on a compliment that my late wife paid me on day. You'll figure it out, you always do. That simple statement almost brought me to tears after all the years of silence from her on the various jobs one will do around the house and garage. Keep on keeping on, Wes. You got this!!
I came to the conclusion when I was a much younger man that machines were easier for me to understand than human beings. I also readily admit it is as much my issue as it is an issue with others. I just prefer to avoid people when possible.
Wes says he used all the tools. I says Wes used all the skills as well. Superb job - especially the flawless weld. (and Kudos to the Oliver tractor, stored outdoors in freezing weather, actually starting!)
2 things Wes: 1. very well edited, as usual, I never get itchy to fast fwd or abandon midstream; 2. curious for my own knowledge if antisieze in the couplings would make future removals easier. We get lot of "weather" in Indiana and I'm always looking to make life better for future me. Maybe a third thing, continuing to support your request of feedback in an earlier video, I am a fan of the eclectic content on your channel, most of us live a normal life and we have many things to repair, or interests to feed. 11,000 views in one hour is a pretty good tell as well that your formula hits with a lot of other people too.
This is actually a good point. I never noticed, but yeah, with other channels I tend to skip or 2x through some slower bits, with WWW videos I've never wanted too. Heck, sometimes I rewind.
Wes, this is one of your best yet. Anybody can do brakes and fix rusted brake lines. But you showed us your talent and know-how on this one. I loved seeing you use all that big equipment we've all seen sitting around in the background. This was by far, one of your most interesting videos.
I loved Max's ASPCA stance! I could here Sara's "Arms of an Angel" as Max took his majestic pose! I think the rotten corn smell can be relatable to those moonshiners back in the hills. You gave those not in a farming community a taste of the sort of battles farmers face on a regular basis. Great Video Wes.
Great tailstock setup! I bet the pucker factor was elevated when you were working on getting that aligned. Thanks for bringing back some machining videos.
When i was growing up on a farm, I never in a million years, would have watched a video about an auger repair, but here I am. Funny how you circle back to your roots. Thank you, sir, for all your hard work making these awesome videos for us. Absolutely one of my favorite channels!
I know at least half a dozen farmers who'd love a shop like yours nearby, those machines (and spare parts for them) are so ridiculously expensive that even a $2000 repair is a real bargain.
Yet again Wes, you have proved how capable an all round engineer you are and how wide your understanding of the different systems you work on is. More power to you and well done on proving you can edit and produce videos to an equally high standard. Thank you so much for all your time and efforts.
Well Wes it looks like you have found a direction to go in for your videos. Good thing you started out as a machinist and were able to refurbish the old equipment . Seems to be paying off. 👍. Artie
Wes, you decided on the CEE repair to the drive shaft and it looks great! Most people don't appreciate how destructive spoiled grain and water are to farm equipment (rotting soybeans smell worse). You have a good lathe setup, and glad to see someone in NW Illinois still knows how to use one! -17F this morning at my place, so I agree that Winter has self corrected.
GREAT WORK!!! I have no idea what you charge for a job like that one but I'm sure it would have cost that farmer a lot more if he had to buy a new one. Your talent far exceeds that of a garage mechanic. I am throughly impressed. .
@@JobyFluorine-ru4bd $50 an hour, they have got to be joking. By the time Wes tokes out all his costings, he would be down $50 an hour. More like $180 an hour. As an old mechanic once told me, it's not the hourly rate, it's what gets done in that hour.
He might do it for $50/hour. Because the owner lent him a tractor for a couple of days last year. Or because the guy's neighbors grandfather sold him that lathe at a massive discount when he retired 15 years ago. Idk, had a local guy give me a massive discount on some work recently so I'm inspired to spread the spirit of generosity around lol. (Not that I want anyone to undervalue their work)
Yay! A Wes video! I was beginning to get a little worried about you. I'm completely impressed, as usual. Great job. You asked what your viewers enjoy? This. This is what I enjoy. The creative brain of Wes wins again.
I come from an industrial background, but the machinery is the same. A lot of screw conveyors have a stuffing box on both ends to seal the trough with the bearings outboard. The stub shaft is longer but it allows the use of actual bearings and long life. Great video!
Stuffing box only helps if the farmer actually keeps it maintained, I know the farm I work on is basically allergic to greasing stuff unless I nag them to let me do it, and many farms in my area are the same way.
Very cool, I grew up around farms and my grand parents owned a grain elevator. Fixing augers that the grain dust ate up was a constant like you said. Cleaning out the rotted grain in the pit around the grain dump basin was always one of the most gag inducing tasks we had, so I can empathize on the rotted corn smell. Have a great day sir, may you and yours be safe.
Especially if it's mixed with rust for some reason. I grew up in the first small farm town north of Flint Michigan and sometimes help friends who lived on farmstead. That became one thing I avoided at all costs after the first time no matter how much they'd beg me to help. That and mucking livestock structures.
That was a great video. I really enjoyed watching you take a worn out grain auger and overcome whatever obstacles came along to make it new again to serve for many more years. It doesn't matter what you work on, its just amazing to watch you pull something apart that was hopeless and use many different tools and techniques to bring it back to life.
cutting edge engineering would be impressed with that machining i bet. way more impressive than what i could ever do. I always enjoy your thinking out of the box on how to fix things.
Wes, An interesting example of diligent work and repair of the old grain elevator . Your mechanical and machinist ability is amazing. You definitely not afraid of going the extra mile and investigate and figure out and resolve issues. The farmers in your rural community are very lucky to have You and Your Dad in the area.A Fan from New Brunswick CANADA
As I begin to push 70 I revel in the times where watching someone work takes me back to my boyhood days back in NW Indiana. My dad was a machinist. The neighbor down the street was a machinist-fabricator. Watching either of them create working mechanical equipment from scratch was better than a magic show in my book. Thanks for taking me back to some very wonderful memories. I spent a few days in industrial maintenance myself, and still watch in awe as things go back together far better than they were assembled in their beginning. Good on ya, man!
Great job. My dad had an auger similar to that when I was a kid and that bushing would only make it a couple of years. We finally welded some angle on to the funnel box and put a self aligning pillow block bearing on it.
Ditto. I used to sell bearings and gear boxes. I asked one time why farm equipment had such cheap gearings. The trainer told me, farmers are cheap and they use their equipment about 3 weeks each year. Bearing upgrades are worth it for sure.
Thanks for another informative and entertaining video. Thanks for remaining true to your core competencies - Technical but not too technical, entertaining without being silly, well edited. Thanks for not creating another feature length film. Thank you for avoiding yet another "Will it start". You are well respected by both your fans and your peers. You know your strengths.
The feeling one gets when you have the equipment and know how to make your own Shafts, sleeves, bushings, hardware ect. in a pinch in indescribable. Love the Machine work.
Jeez Wes, I have to say, just like the Ants Pants channel, your subdued and relatable sense of humor makes all your vids not only educational but completely entertaining. I'm pretty sure your subsciption count is a reflection of this. Try not to overthink stuff and just be you....that's what we want!
Wes, years ago I needed a piece machined and couldn't find anybody that could do it. I finally found a 93-year-old machinist that had the machines in his garage and told me he'd do it for me. Was a transmission part for a Pontiac. Worked like magic. Lost art? Always enjoy your videos. Let's see more of the kiddo.
I really enjoyed this video but it brought something to mind that I hadn't thought of before. I have often proudly proclaimed that he who dies with the most clamps wins. But after watching this video I realized that it may be he who dies with the most jacks wins. You certainly have a vast collection of different kinds of jacks. Someday if you're feeling pressured to get a video out and have no idea what to discuss I would like to see your whole collection of different jacks and where you use them. Just a suggestion. Keep up the good work. PS, I was so moved by Max's performance that I immediately donated money to my local SPCA
Excellent repair, Wes. Jobs like that eat up your time, and sometimes you can’t justify the hours. I enjoy watching you work. You are a true professional. Personally I like the variety of your content. Thanks for sharing.
As soon as I saw that corn slush at the bottom I could smell it. I wish I couldn't. You're a better man than me, Wes. If someone brought something like this to me I'd have told them 'no thank you'.
That's a great video. Shows your versatility as a mechanic. Nice length, good content. Perfect timing too on a Sunday morning, with it -12 outside. Keep em coming.
Thanks for another good video, a grain auger makes a nice change from rusted out trucks with electrical problems. When I used to work at the seed farm fixing the auger fleet was my job. I got real good and creative with repairs to some of them, that were worn out and should of been replaced. I still go back once in a while and fix stuff for them if they are busy just to keep my hand in, but luckily it's new augers and service work more now . Yeah that wet rotting grain smell's something unique. I'd say it would be about the same smell and consistency as feeding Max Taco Bell everyday for about 3 weeks, and you certainly don't want to get it on your hands and try get rid of the stink for 2 days after L.O.L Take care.
All around great stuff. Starting with what we don't see. First of all sizing up the job before you choose to accept it, Second, knowing all the remedies and equipment you have in case of on the fly curve balls. Third, having your shop equipped with what you'll need to create your solutions, Bravo!
I imagine Mayrath has a huge number of fixtures specific to the augers, and procedures, like removing the axle A-frame so as to fix the fixed bits better. But, I'll wager they would not shave more than 10 man-minutes' labor off the job. So, good job @Wes And, as always, a great video.
I can only imagine how much time was actually involved including the video and editing. Farm machinery repairs can be some of the most difficult due to the designs as you pointed out several times. You made it look easy and it was very enjoyable to watch. Thank you for the video.
My dad and I used to fix these things for the local farmer when I was a kid. I never knew how they managed to screw them up so bad, but I always despised working on them. You could always guarantee a weld job was coming. All the ones I've seen were PTO driven, so probably worse damage happened if you consider I don't ever remember seeing a slip clutch on them. Farmers will run the life out of things for sure -but generally out of desperation and not ignorance. Like how you removed the coupling ..just got a flashback to a 3 point spreader I bought last year.
I find this video quite interesting besides from fixing cars. It is really cool how you used many tools and techniques to refurbish worn or broken parts. Great video👍
Please keep doing what you do Wes I love your channel can't wait to see the shop upgrade process you were talking about in the last video everything your doing is very interesting and I love the the humor!
My father taught Industrial Mechanics. He owned his own machine shop in Saskatoon, Saskatchewan. Your channel reminded me of him. Thank you for sharing the work you do. . . . I once was hunting pheasants on a Hutterite Colony north of Strathmore, Alberta. I mentioned that Flexi-coil built the grain auger that I saw sitting over by their granary. I got a lecture about how it was a piece of junk. Relatives had built it years ago. I can see why a grain auger wears out after watching your video. 😮
This is an instant classic. Everything about this device is simple and visually accessible to understand along with all the the issues and fixes. Feel like with a car there are so many preconceptions not to mention stuff is compact and hidden. But imagine if every middle school kid in America watched this. The educational potential is huge. Learn a little about machining, repair work, practical problem solving, plus insight into a slice of American life that's rarely seen unless you are rural. If I were a teacher somewhere in the burbs or the city I'd be all over this. Idk, this one just struck me for some reason.
your problem is you don't understand how gifted you are. We all enjoy watching gifted people using those gifts. Painting a portrait. Playing the piano. Training a horse. Etc., etc. Watching you apply your tremendous gift of fixing stuff is extremely satisfying for many, many of us!!!! Keep 'em coming!!!!
Winter is self correcting everywhere now in Michigan we are having a cold snap of -6° feels like -20°f good video reminder me of working with my Dad and Grandpa on the farm repairing augers and elevators.
Air hammers are the true unsung heroes of everybody who turns wrenches and finds themselves responsible for the care and maintenance of rusty junk. I feel stupid that it took me until my mid-30s to finally get one and start using it--they're cheap and will run off of a lousy roofer's compressor. Better late than never, I suppose.
Wes your skill sets are amazing. From welding to machine work to understanding bearings to metal shaping to having the mechanical understanding how to do things. You Sir are "old school" knowledge putting your crafts to work in today's world. Tip of the hat Sir!!!
Hi Wes, In a previous video you asked what sort of videos your viewers like to see. For me, it's this. Any schlub can diagnose and replace car parts. It's far more interesting to watch you solve problems that require more than that, and it's very interesting seeing equipment that I don't see every day, like the ag and construction stuff. It's good stuff and is what sets you apart from the other channels in this space,
Wes, I couldn’t be further removed from what you’re fixing, yet I always watch your vids. My mom’s side were wheat farmers in central Kansas and they would love and appreciate the work you do, sadly they’ve all moved on. It’s incredible the things you fabricate and fix. Cheers from Washington DC. - Early subscriber :)
Love watching you fix stuff including traditional vs. non-traditional things like this auger. Hearing you think out loud and problem solve and manage bad news and make decisions on cost etc... things that you do naturally and so effortlessly are truly inspiring and they give confidence to guys like me to push the boundaries and dig deeper into your own repair projects and to not be afraid to learn something new and increase your own knowledge and skill set while making mistakes (hopefully not too costly) along the way. Thank you. Keep going!
One of my favorite episodes, it had a lot of skills demonstrated to pull the whole thing together. Thanks for making it. And I'm pretty sure that Oilite bushing will 'work fine, last long time'...
As soon as I saw a grain auger coming into the workshop I knew trouble was in store ! I grew up in Western Canada on a farm , as you drive down the gravel roads you see more than one grain auger lined up in neighbor’s machinery parking area waiting to be repaired , nobody has the time to do it during Spring or fall rush so just they get a new one because you can’t stop seeding or harvesting and you can “ fix it this winter” but after you fix one it gets old really fast so they don’t get “round to it” ! Bloody aggravating as every one is different and you can’t seem to get parts for them?
Forklift, bumper on a 2 1/2 ton winch truck, rosebud, sledge, and water to quench on a Sunday afternoon in the middle of almond harvest, ahh, good times…. That corn sludge has a smell akin to stepping into one of Max’s leavings, agreed? Good machining, another fine job!
Go Max! From your fan club. Great video, as usual. A simple job, if you have the knowledge and $100,000 worth of machine tools! Farm implements employ some interesting, and undoubtedly reliable and cost effective engineering design choices. Love it.
Great machine repair video, I like it. Please do more! Your skill level at fixing things is awesome your only limitation is your resources. A good machinist is valuable. I’ll bet fixing that grain auger is more valuable to the customer than fixing his car or truck. I hope your hand gets better soon.
nice job man, your setting yourself up with a quite capable shop, if you ever get tired of doing videos.i can only imagine the projects wes & son will getting into in a few years.the kid will have the coolest toys for hundreds of miles around.or refurbishing antique tractors by 12.
Hello Wes,
I’m not a professional comments writer; in fact, I don’t speak English very often, as I’m from a little post soviet country, but I like to watch your videos, because they’re about finding the solution for unsolvable (sometimes) problems.
I just wanted to thank you for the great content you make, and wish you and your family the best
Your English is excellent. Your comment was at a higher reading level than most native English speaker. Don't be afraid to comment anytime in English..
“It’s a grain auger, not the space shuttle” classic. Wes I love you. Keep it up 👍🏼
Wes: I got about 12 hours into this job, it's just difficult to find that much time to work on a single project...
Me: I tell you what's even more difficult to find.... A machine shop in the middle of a corn field and a machinist who is willing to work on a corn auger for 12 hours...
Good professional factory repair Wes, awesome video and content.
Wes is amazing.
If Wes Works, they will come…
I'm surprised they didn't just weld the coupler to the shaft, must be a new farmer
The workshop is kinda open again for the public because Wes choose what he'll take. That is great to see.
@@M.TTT. maybe coulda woven a Chinese handcuff outa bailing wire, but it’s subject to work hardening…
Another great line, "I tried asking nicely" almost beats "It's only temporary unless it works" Brilliant! Thanks Wes
I never heard the word please during that time
Thanks Wes. I worked on grain bins, augers, belt elevators, etc. about 25 years ago as a summer/weekend job. I can attest that rotting grain is enough to gag a maggot, every single piece is always rusted, oblong, wallowed, broken, and mostly designed to never come off, and that no auger has ever been repaired willingly and without a blood sacrifice. Thanks for the memories. Working that job made me drop pre-med to go into engineering. I mostly hate people, so I think the world is a better place because of that.
Like the Area Diesel Service hoodie..!!
So you design the machines that hate people. Get rid of them directly, or go big and have the machines do the work…
😂 I can relate
You didn’t have to tell us you hated people, it was self evident when you said you were an engineer. lol.
"Max and the pose for the ASPCA commercial"... Perfect line. Wes, your humor really does add a lot to all your videos. LOL!
Love the hybrid repair and machining content
It always amazes me at how many man hours you put into these project to make them workable. Its even more amazing when I have to assume you give an equal time to editing these videos and give us content every week aside from your family life. BTW, I'm pretty sure I saw Max's picture on the ASPCA mail I got last week. Well done and thanks Wes!
Filming at least doubles the time. Editing is another 6-8 hours, though this one went pretty quick.
Excellent video Wes. I’ve been an automotive tech for over fifty years and learn something new with almost every one of your videos, keep ‘em coming.
Wes, I'd like to pass on a compliment that my late wife paid me on day. You'll figure it out, you always do. That simple statement almost brought me to tears after all the years of silence from her on the various jobs one will do around the house and garage. Keep on keeping on, Wes. You got this!!
like laying around fishing and waiting for a nibble... Like a nibble an idea WILL come around....
😂 my wife said." It's a good thing I keep you around " your my handiess man...😅😅😅
I came to the conclusion when I was a much younger man that machines were easier for me to understand than human beings. I also readily admit it is as much my issue as it is an issue with others. I just prefer to avoid people when possible.
My wife says if your man ain’t handsome he best be handy.
For the record I’m quite handy.
@kge420 She be watching Red Green!
Wes says he used all the tools.
I says Wes used all the skills as well. Superb job - especially the flawless weld.
(and Kudos to the Oliver tractor, stored outdoors in freezing weather, actually starting!)
2 things Wes: 1. very well edited, as usual, I never get itchy to fast fwd or abandon midstream; 2. curious for my own knowledge if antisieze in the couplings would make future removals easier. We get lot of "weather" in Indiana and I'm always looking to make life better for future me. Maybe a third thing, continuing to support your request of feedback in an earlier video, I am a fan of the eclectic content on your channel, most of us live a normal life and we have many things to repair, or interests to feed. 11,000 views in one hour is a pretty good tell as well that your formula hits with a lot of other people too.
I used some fluid film. It helps a bit with removal. Nothing is really going to help. The dust gets into everything.
And if you use the wrong thing the dust just sticks to it and gathers faster, it's a cruel mistress
This is actually a good point. I never noticed, but yeah, with other channels I tend to skip or 2x through some slower bits, with WWW videos I've never wanted too. Heck, sometimes I rewind.
@@TheFool2cool there isn't anything more cruel than petroleum coke dust and we always used "Never -Seeze" . Made the difference many a time.
Wes, this is one of your best yet. Anybody can do brakes and fix rusted brake lines. But you showed us your talent and know-how on this one. I loved seeing you use all that big equipment we've all seen sitting around in the background. This was by far, one of your most interesting videos.
I agree, that was really great. It takes a special set of skills and knowledge to do a job like that, and do it well.
Measured once, cut it twice and it was still too short. We've all been there.
Luckily it was only short on one end. 😂😂
I thought it was on purpose for future adjustments.
My rule of succes: Measure with the caliper, scribe with chalk, cut with the axe.
I loved Max's ASPCA stance! I could here Sara's "Arms of an Angel" as Max took his majestic pose! I think the rotten corn smell can be relatable to those moonshiners back in the hills. You gave those not in a farming community a taste of the sort of battles farmers face on a regular basis. Great Video Wes.
Yep ain't nothing like farming 😍
Great tailstock setup! I bet the pucker factor was elevated when you were working on getting that aligned. Thanks for bringing back some machining videos.
spindle side is the headstock
When i was growing up on a farm, I never in a million years, would have watched a video about an auger repair, but here I am. Funny how you circle back to your roots. Thank you, sir, for all your hard work making these awesome videos for us. Absolutely one of my favorite channels!
I know at least half a dozen farmers who'd love a shop like yours nearby, those machines (and spare parts for them) are so ridiculously expensive that even a $2000 repair is a real bargain.
Yet again Wes, you have proved how capable an all round engineer you are and how wide your understanding of the different systems you work on is. More power to you and well done on proving you can edit and produce videos to an equally high standard. Thank you so much for all your time and efforts.
Well Wes it looks like you have found a direction to go in for your videos. Good thing you started out as a machinist and were able to refurbish the old equipment . Seems to be paying off. 👍. Artie
It sure is handy!
Not one joke about the standard of preventive maintenance! Mebbe a sort of visual joke? Good job and probably the most economic solution possible.
Appreciate the combined engineering/manufacturing/repair videos. This was great!
Wes, you decided on the CEE repair to the drive shaft and it looks great! Most people don't appreciate how destructive spoiled grain and water are to farm equipment (rotting soybeans smell worse). You have a good lathe setup, and glad to see someone in NW Illinois still knows how to use one! -17F this morning at my place, so I agree that Winter has self corrected.
All Wes needs is a couple of birds that hang out and his dog wearing a camera.
It was -17 here too. Max wanted to go for a walk. We barely made it across the road.
CEE Is one of my favourites. The Crane teardown and rebuild is going to be done as thoroughly as Wes would do it.
@@IGDZILLA I think that the Frana Crane could keep Wes and Kurtis in content for the next year.
@@WatchWesWork I'm in NE Wisconsin and the last few days, even our Saint Bernards didn't want to go out. LOL
GREAT WORK!!! I have no idea what you charge for a job like that one but I'm sure it would have cost that farmer a lot more if he had to buy a new one. Your talent far exceeds that of a garage mechanic. I am throughly impressed. .
At 50 an hour that's 600
Plus parts .
Cheaper then buying a new one
More like at least $2K plus supplies, so maybe $2400. I am guessing that auger was $20-25K, but that is a total guess.
@@JobyFluorine-ru4bd $50 an hour, they have got to be joking. By the time Wes tokes out all his costings, he would be down $50 an hour. More like $180 an hour. As an old mechanic once told me, it's not the hourly rate, it's what gets done in that hour.
Fifty dollars per hour for labor is laughable. Imagine the tools, expertise, and knowledge a person needs for these jobs.
He might do it for $50/hour. Because the owner lent him a tractor for a couple of days last year. Or because the guy's neighbors grandfather sold him that lathe at a massive discount when he retired 15 years ago.
Idk, had a local guy give me a massive discount on some work recently so I'm inspired to spread the spirit of generosity around lol. (Not that I want anyone to undervalue their work)
Yay! A Wes video! I was beginning to get a little worried about you. I'm completely impressed, as usual. Great job. You asked what your viewers enjoy? This. This is what I enjoy. The creative brain of Wes wins again.
Wes -- "The last stop before the crusher". Always entertaining -- thank you
as someone else said I think the hybrid repair / machining videos of yours are my favorite. Especially with the quality of work you do.
I come from an industrial background, but the machinery is the same. A lot of screw conveyors have a stuffing box on both ends to seal the trough with the bearings outboard. The stub shaft is longer but it allows the use of actual bearings and long life. Great video!
That would be nice.
That makes more sense, but also more cost.
Stuffing box only helps if the farmer actually keeps it maintained, I know the farm I work on is basically allergic to greasing stuff unless I nag them to let me do it, and many farms in my area are the same way.
I am sure not many shops would have ATTEMPTED that job. Great video/work............Jay
Probably not. Mostly because it's big and unusual.
Your perseverance in the face of life’s roadblocks is amazing 🙂 much respect ✊
Grand save!
Hope the guy paying the bill watches this and appreciates your time, skill and effort
Very cool, I grew up around farms and my grand parents owned a grain elevator. Fixing augers that the grain dust ate up was a constant like you said. Cleaning out the rotted grain in the pit around the grain dump basin was always one of the most gag inducing tasks we had, so I can empathize on the rotted corn smell. Have a great day sir, may you and yours be safe.
Just don' a gas mask and it doesn't matter what's in front of you :P
Especially if it's mixed with rust for some reason.
I grew up in the first small farm town north of Flint Michigan and sometimes help friends who lived on farmstead.
That became one thing I avoided at all costs after the first time no matter how much they'd beg me to help.
That and mucking livestock structures.
I am a born and bred “City Boy “. I thought we were going to make “pop corn “ for a minute there!
@rkan2 the mask slows you down to much
@@adamdnewman A blower mask won't.
Wes is the man! That comment about Max was hilarious!!!
That was a great video. I really enjoyed watching you take a worn out grain auger and overcome whatever obstacles came along to make it new again to serve for many more years. It doesn't matter what you work on, its just amazing to watch you pull something apart that was hopeless and use many different tools and techniques to bring it back to life.
You have to be the most consistent gold medal winner in the " One Man Job" Olympics! 🥇🏅🏆🎖
cutting edge engineering would be impressed with that machining i bet. way more impressive than what i could ever do. I always enjoy your thinking out of the box on how to fix things.
Good call mate 😂.
Wes, An interesting example of diligent work and repair of the old grain elevator . Your mechanical and machinist ability is amazing. You definitely not afraid of going the extra mile and investigate and figure out and resolve issues. The farmers in your rural community are very lucky to have You and Your Dad in the area.A Fan from New Brunswick CANADA
Nice to see the old lathe again. Enjoyed the video. Bet the skidsteer is proving its worth in the snow.
As I begin to push 70 I revel in the times where watching someone work takes me back to my boyhood days back in NW Indiana. My dad was a machinist. The neighbor down the street was a machinist-fabricator. Watching either of them create working mechanical equipment from scratch was better than a magic show in my book.
Thanks for taking me back to some very wonderful memories. I spent a few days in industrial maintenance myself, and still watch in awe as things go back together far better than they were assembled in their beginning.
Good on ya, man!
Great job. My dad had an auger similar to that when I was a kid and that bushing would only make it a couple of years. We finally welded some angle on to the funnel box and put a self aligning pillow block bearing on it.
yea that's what this needs, not sure why they use a bushing
Ditto. I used to sell bearings and gear boxes. I asked one time why farm equipment had such cheap gearings. The trainer told me, farmers are cheap and they use their equipment about 3 weeks each year. Bearing upgrades are worth it for sure.
I love how you said," It's not as good as what WE just made"!
You're the man for including us in your builds 🙏🙌
Never thought I’d enjoy watching Wes fix an auger. This was a fun one and I’m glad I chose to watch. Nice work!
Thanks for another informative and entertaining video. Thanks for remaining true to your core competencies - Technical but not too technical, entertaining without being silly, well edited. Thanks for not creating another feature length film. Thank you for avoiding yet another "Will it start". You are well respected by both your fans and your peers. You know your strengths.
The feeling one gets when you have the equipment and know how to make your own Shafts, sleeves, bushings, hardware ect. in a pinch in indescribable. Love the Machine work.
Jeez Wes, I have to say, just like the Ants Pants channel, your subdued and relatable sense of humor makes all your vids not only educational but completely entertaining. I'm pretty sure your subsciption count is a reflection of this. Try not to overthink stuff and just be you....that's what we want!
These type of repair videos are my favorite.
You won't hurt my feelings if you show more of them 👍👍
Wes, years ago I needed a piece machined and couldn't find anybody that could do it. I finally found a 93-year-old machinist that had the machines in his garage and told me he'd do it for me. Was a transmission part for a Pontiac. Worked like magic. Lost art? Always enjoy your videos. Let's see more of the kiddo.
I really enjoyed this video but it brought something to mind that I hadn't thought of before. I have often proudly proclaimed that he who dies with the most clamps wins. But after watching this video I realized that it may be he who dies with the most jacks wins. You certainly have a vast collection of different kinds of jacks. Someday if you're feeling pressured to get a video out and have no idea what to discuss I would like to see your whole collection of different jacks and where you use them. Just a suggestion. Keep up the good work.
PS, I was so moved by Max's performance that I immediately donated money to my local SPCA
Yeah I probably have two dozen.
Another great video.
I've never seen a dog that can look as miserable as Max. He is literally perfected the art of the miserable look.
Excellent repair, Wes.
Jobs like that eat up your time, and sometimes you can’t justify the hours.
I enjoy watching you work. You are a true professional.
Personally I like the variety of your content.
Thanks for sharing.
Sometimes you need an engineer, machinist, and a mechanic all rolled into one. This was one of those times. Good work.
Very professional work Wes! And 42 min long.. Enjoyed every second of it! Kudos to you Sir!
As soon as I saw that corn slush at the bottom I could smell it. I wish I couldn't. You're a better man than me, Wes. If someone brought something like this to me I'd have told them 'no thank you'.
That's a great video. Shows your versatility as a mechanic. Nice length, good content. Perfect timing too on a Sunday morning, with it -12 outside. Keep em coming.
Lived on a farm for 30 years. Rotten corn and silage are memories I'd like to forget
Thanks for another good video, a grain auger makes a nice change from rusted out trucks with electrical problems. When I used to work at the seed farm fixing the auger fleet was my job. I got real good and creative with repairs to some of them, that were worn out and should of been replaced. I still go back once in a while and fix stuff for them if they are busy just to keep my hand in, but luckily it's new augers and service work more now . Yeah that wet rotting grain smell's something unique. I'd say it would be about the same smell and consistency as feeding Max Taco Bell everyday for about 3 weeks, and you certainly don't want to get it on your hands and try get rid of the stink for 2 days after L.O.L Take care.
This kind of video is what I watch for. I like the put it back to work approach.
man Wes can fix anything. incredible with enough machine tools Wes could rule the world.
All around great stuff. Starting with what we don't see. First of all sizing up the job before you choose to accept it, Second, knowing all the remedies and equipment you have in case of on the fly curve balls. Third, having your shop equipped with what you'll need to create your solutions, Bravo!
I imagine Mayrath has a huge number of fixtures specific to the augers, and procedures, like removing the axle A-frame so as to fix the fixed bits better. But, I'll wager they would not shave more than 10 man-minutes' labor off the job. So, good job @Wes
And, as always, a great video.
I can only imagine how much time was actually involved including the video and editing. Farm machinery repairs can be some of the most difficult due to the designs as you pointed out several times. You made it look easy and it was very enjoyable to watch. Thank you for the video.
My dad and I used to fix these things for the local farmer when I was a kid. I never knew how they managed to screw them up so bad, but I always despised working on them. You could always guarantee a weld job was coming. All the ones I've seen were PTO driven, so probably worse damage happened if you consider I don't ever remember seeing a slip clutch on them. Farmers will run the life out of things for sure -but generally out of desperation and not ignorance.
Like how you removed the coupling ..just got a flashback to a 3 point spreader I bought last year.
I find this video quite interesting besides from fixing cars. It is really cool how you used many tools and techniques to refurbish worn or broken parts. Great video👍
Good content. I’m glad you were able to do the repairs indoors. (That was a game changer back in the day.) 🥶
I must say once again, your engineering skills and creativity are/is amazing!!!!
I really enjoy your videos wes, you have a style that noone else comes close to. Doesn't matter what you are doing I end up interested.
I like your attitude! You seem to say, "BRING IT ON" ! That's why I watch Wes Work!!
Please keep doing what you do Wes I love your channel can't wait to see the shop upgrade process you were talking about in the last video everything your doing is very interesting and I love the the humor!
My father taught Industrial Mechanics. He owned his own machine shop in Saskatoon, Saskatchewan. Your channel reminded me of him. Thank you for sharing the work you do. . . . I once was hunting pheasants on a Hutterite Colony north of Strathmore, Alberta. I mentioned that Flexi-coil built the grain auger that I saw sitting over by their granary. I got a lecture about how it was a piece of junk. Relatives had built it years ago. I can see why a grain auger wears out after watching your video. 😮
Great job Wes. Pleasure to watch you repair equipment. Thanx
This is an instant classic. Everything about this device is simple and visually accessible to understand along with all the the issues and fixes. Feel like with a car there are so many preconceptions not to mention stuff is compact and hidden.
But imagine if every middle school kid in America watched this. The educational potential is huge. Learn a little about machining, repair work, practical problem solving, plus insight into a slice of American life that's rarely seen unless you are rural.
If I were a teacher somewhere in the burbs or the city I'd be all over this. Idk, this one just struck me for some reason.
Machining up parts to fix stuff is one of the few things I miss about being a mechanic. Nice to be able to live vicariously through your video. :)
your problem is you don't understand how gifted you are. We all enjoy watching gifted people using those gifts. Painting a portrait. Playing the piano. Training a horse. Etc., etc. Watching you apply your tremendous gift of fixing stuff is extremely satisfying for many, many of us!!!! Keep 'em coming!!!!
That setup in the lathe is a work of art........you gotta do what you gotta do! MAKING IT HAPPEN
Winter is self correcting everywhere now in Michigan we are having a cold snap of -6° feels like -20°f good video reminder me of working with my Dad and Grandpa on the farm repairing augers and elevators.
It was -17F here when I woke up.
Great fix on the auger. Its been a few years / decade since we've had this much snow at once
Air hammers are the true unsung heroes of everybody who turns wrenches and finds themselves responsible for the care and maintenance of rusty junk. I feel stupid that it took me until my mid-30s to finally get one and start using it--they're cheap and will run off of a lousy roofer's compressor. Better late than never, I suppose.
Wes your skill sets are amazing. From welding to machine work to understanding bearings to metal shaping to having the mechanical understanding how to do things. You Sir are "old school" knowledge putting your crafts to work in today's world. Tip of the hat Sir!!!
I appreciate the explanation on the brass bushing, thanks for the video Wes, one of my favorite channels on RUclips
Hi Wes,
In a previous video you asked what sort of videos your viewers like to see. For me, it's this.
Any schlub can diagnose and replace car parts. It's far more interesting to watch you solve problems that require more than that, and it's very interesting seeing equipment that I don't see every day, like the ag and construction stuff. It's good stuff and is what sets you apart from the other channels in this space,
Thank you Wes! Really liked the format of this video. I like hearing the tools work and do their task.
Wes, I couldn’t be further removed from what you’re fixing, yet I always watch your vids. My mom’s side were wheat farmers in central Kansas and they would love and appreciate the work you do, sadly they’ve all moved on. It’s incredible the things you fabricate and fix. Cheers from Washington DC. - Early subscriber :)
"There's janky. And then there's whatever this is." That had me rolling. Keep up the good work, Wes.
Love watching you fix stuff including traditional vs. non-traditional things like this auger. Hearing you think out loud and problem solve and manage bad news and make decisions on cost etc... things that you do naturally and so effortlessly are truly inspiring and they give confidence to guys like me to push the boundaries and dig deeper into your own repair projects and to not be afraid to learn something new and increase your own knowledge and skill set while making mistakes (hopefully not too costly) along the way. Thank you. Keep going!
One of my favorite episodes, it had a lot of skills demonstrated to pull the whole thing together. Thanks for making it. And I'm pretty sure that Oilite bushing will 'work fine, last long time'...
Great repair! I’m amazed at the variety of things you work on and are able to actually fix. Thank you for bringing us along.
I really appreciate that every piece of equipment receives the "basic" service when it's being worked on. Way to keep your equipment in good shape 👍
As soon as I saw a grain auger coming into the workshop I knew trouble was in store ! I grew up in Western Canada on a farm , as you drive down the gravel roads you see more than one grain auger lined up in neighbor’s machinery parking area waiting to be repaired , nobody has the time to do it during Spring or fall rush so just they get a new one because you can’t stop seeding or harvesting and you can “ fix it this winter” but after you fix one it gets old really fast so they don’t get “round to it” ! Bloody aggravating as every one is different and you can’t seem to get parts for them?
Forklift, bumper on a 2 1/2 ton winch truck, rosebud, sledge, and water to quench on a Sunday afternoon in the middle of almond harvest, ahh, good times…. That corn sludge has a smell akin to stepping into one of Max’s leavings, agreed? Good machining, another fine job!
Go Max! From your fan club. Great video, as usual. A simple job, if you have the knowledge and $100,000 worth of machine tools! Farm implements employ some interesting, and undoubtedly reliable and cost effective engineering design choices. Love it.
The average farmer must be able to figure it out after sitting on a combine for a straight week without much sleep
This project is one like Oli at a Snowball’s videos. A great savings to the customer by your ability to make it work.
I really like the long indepth videos. Nice work W3
This is why I love your channel. Who else on RUclips works on this stuff?
Great machine repair video, I like it. Please do more! Your skill level at fixing things is awesome your only limitation is your resources. A good machinist is valuable. I’ll bet fixing that grain auger is more valuable to the customer than fixing his car or truck. I hope your hand gets better soon.
Poor max. Great video. I learn something new every time I watch this.
I love your new video format Wes. More of these fix-it/fabricate vids please. 🇨🇦
It s nice ti see that Max is keeping his skills in check for the ASPCA commercials.
Looked like you really enjoyed this job Wes ! As always all the skills and thorough 😅
If you are still curious about what kind of content we want to see... Personally I love this video. Keep up the good work Wes!
nice job man, your setting yourself up with a quite capable shop, if you ever get tired of doing videos.i can only imagine the projects wes & son will getting into in a few years.the kid will have the coolest toys for hundreds of miles around.or refurbishing antique tractors by 12.
Awesome work all around. It was a pleasure watching Wes work. 👍