New videos coming to the channel every week in 2019! Please share our channel with your friends. Easy to do via this link: ruclips.net/user/whitlockgarage
Craig Neubert you’re welcome! It’s a really cool truck. Already planning another video around this truck. Some super sweet things that we didn’t even cover in this one.
Just found your channel...and definitely subscribed...love c10s of all years and just gm trucks in general...but my favorite is the square body era...and this truck is awesome. Cant wait to see more.
Sweet truck, love the channel. I have an 84 square body Silverado trim. Bought it in January, been working on her ever since. Still need to fix 3 things to be road worthy.
This is only my opinion but don’t deviate to far away from the truck scene, there’s heaps doing the car scene out there and what drew me to your channel was that your all about trucks, don’t know if to many are doing this😊👍
Allan Taylor we’ll likely sprinkle a few cars in here and there but we’re all about trucks. We even started United By Trucks for that reason. Not deviating from that. It will always be the foundation and backbone of this channel!
if i drove my truck in a 30ft ditch it wouldnt sit as low as that beast!!!!!!!!! ha ha love the truck! cool name and i like how he done the bed floor!!!!
New Subscriber...From Indiana...😎✌..Can't wait to catch up and enjoy from here on out ..👍. Thanks Glad I joined.... Diffenlty... Getting that Awsome Gear .. Thanks..😎🤘✌👍🔧
One could always draw a horizontal line along the length and cut the entire body. The driver and passenger could recline in the prone position. The wheels could be 45 inch with super low profile.
I love the brown and white truck you dropped of at your buddy's house and that fact that his wife bought him for it...I want a truck just like it..find me one and I will buy it
Can these trucks be bagged without the wheel alignment steady changing, towed in an towed out', when the body is adjusted at different heights? Phillip Hall
Bagged and buried 73to87 GM squarebodys are dangerous (boomers exploding & burning) and just like all GM trucks the least reliable rust crap so yes bury it
Hi, I'm doing my Brother's 84 C10. He passed away and I'm going to finish the mid. He installed air bags. Did you cut your rear bed and remove your front fender wells? Looking for a good write up. Thanks
Kevin Ordoyne man, my first truck was a ‘96 s10 shorty with a 4.3 Vortec, lowered on 17s. Miss that truck! To answer your question, no, we’re mostly about GM trucks and c10s bc that what we own and our friends are into, but we’re United By Trucks here so, at the end of the day, it really doesn’t matter as long as its cool.
My wife is going to issue a Cease and Desist order due to you guys giving me a hankering for a square body. I guess if I have to have a crush on a truck I picked a pretty good one....
That's how you check oil in a Chevy no oil under it no oil in it lol 😜 just kidding I've got me a 77 and she needs lots of love And I give her all I can
Hey everybody I just wrecked my c10 stepside sqaurebody in the front. It was a show quality truck before and I want to piece it back together. Does anyone have a good donor front clip for the second generation sqaurebodys?
Man, I hate that! I don't have anything for a 2nd gen squarebody but you shouldn't have any trouble finding quality used parts on Facebook marketplace.
I like the look of the truck even paint and patina.I just don't care for the whole bag set up I need that stiff rigidity with my lowering for planting huge horsepower!
We're gonna have a follow-up video where we go in-depth on the suspension set-up a little more. Jeremy wants to freshen up the engine bay a bit more before we do.
I trade my 1979 gmc short bed 454 Motor for 1967 Ford f100 short bed just because the gmc is so uncomfortable the seat is to close to the steering wheel and I’m only 5”8 and in the f100 is much better more room when seated
New videos coming to the channel every week in 2019! Please share our channel with your friends. Easy to do via this link: ruclips.net/user/whitlockgarage
The way the door creeks.. whole lotta character In that squarebody. Love it
Robbie, you nailed it! Thanks again buddy. The video came out great.
Jeremy Churchill thanks for the opportunity! I’m really happy with how it turned out.
Ever thought about a set if coys c33 wheels they look pretty good?
This is like my 20th time watching this truck. I’m using it for a reference point.
It's a badass truck for sure.
That frame is a masterpiece
No doubt.
Seeing all these beautiful trucks being lowered to the ground makes me shake my head....
Badass,beautiful truck.gotta love the bagged and bodied scene
mike jasso 🤘🏼
Very beautiful c 10 every one needs a c10 in their garage
Man, that's the truest thing I've ever heard.
absolutely love it and the door and frame creaks perfect with the name and love the base model and dealer bumpers 😍
Yes sir!
That wagon is sick.
Yes it is!
Round eyes for the win!!!!
Been following this truck for a while. Great video once again.
Thanks, Craig! Rusturd is crazy cool. Once he gets the engine bay done he'll be back.
Love the fishing poles in it.
Me too! The fishing theme is super cool.
So badass. Handbuilt whips from the south!
That's it!
NIIIICE! Thanks for the in depth look at this sweet truck. Love those wheels. Also love the whole look of the truck.
Craig Neubert you’re welcome! It’s a really cool truck. Already planning another video around this truck. Some super sweet things that we didn’t even cover in this one.
The tuck was sweet.
Completely agree!
Fkn awesome truck man👍🏼👍🏼👍🏼 bad asss vídeo mannn ... keep it up ..
Thanks, Jose!
Just found your channel...and definitely subscribed...love c10s of all years and just gm trucks in general...but my favorite is the square body era...and this truck is awesome. Cant wait to see more.
Awesome! Thanks so much. I love a good squarebody, too.
Nice tire and wheel tuck! Awesome garage build!
For sure
Got to love any truck called mustard great build .... keep the square body's coming.
Isn't it? Definitely plan to.
Bro you keep killing it with the videos keep them coming we all appreciate it
Glad you're digging it! I'm having a blast bringing it to you!
@@UNITEDBYTRUCKS do some long beds and maybe some nice ones with good suspension not all airbag
Love builds like this
Rusty Wrenches me too! Especially when the builder/owner is as nice and down-to-earth as Jeremy.
You're killin' it with these SWEET squarebodies💯🔥🔥🔥 Keep up the awesome work 👍
Thanks, man!
Peep those old school Zebco's! Craaaaaazy!
That’s right!
Love it !! Rustard !!! Love this channel brother !!
Hermen Lomas thanks, Hermen! Appreciate you.
My favorite channel by far!!
Daniel Burford that’s as good as it gets! Thank you.
Sweet truck, love the channel. I have an 84 square body Silverado trim. Bought it in January, been working on her ever since. Still need to fix 3 things to be road worthy.
Sweet! We love a good squarebody
Like it one of the coolest c10's I have ever seen like the fishing rodz rack
Big Chevy yes sir! Super cool touch.
I automatic subscribed C10 life
Yes sir! Thank you
I love this. Period.
Yes sir!
Nice 👍 sweet looking truck
That's a badass truck
Rafael Sanchez yes sir!
That thing is MINT 🤘🏼🤘🏼
John Wargo 🤘🏼
New to the channel an loving it I've got square body's a 72 and a 81 so I'm going to be here for a while keep them videos coming
Awesome! Thanks for watching. We've got new videos coming twice a week.
SA-Weet! Love it! "Tuckin lugs"! That's a new one for me!
Olde Carr Auto Guy haha it’s an old mini-truck term from back in the day. 🤘🏼
I remember one:
Real men tuck their (lug)nuts
Freakin awesome truck! Thanks for sharing. Love me some Whitlock Garage!
Deke Bell thanks, man!
Yeah bro awsome ride man chevy fan for life👊
Fo sho!
Super cool truck and another super cool video, your the man👍
Allan Taylor thanks, Allan. Appreciate the awesome feedback.
I’ve just ordered a tee shirt for myself and a sticker for my truck😊
This is only my opinion but don’t deviate to far away from the truck scene, there’s heaps doing the car scene out there and what drew me to your channel was that your all about trucks, don’t know if to many are doing this😊👍
Allan Taylor that means so much! Helps us invest right back into the channel to bring you even better content.
Allan Taylor we’ll likely sprinkle a few cars in here and there but we’re all about trucks. We even started United By Trucks for that reason. Not deviating from that. It will always be the foundation and backbone of this channel!
You tha man.., or should I say, y’all tha people..!
Keep it up brother..👍🏼
ADAM HENSON thanks buddy!
Love that look
Heck yeah! Me too!
Love it ⭐️NO REGRETS GA ⭐️
alan treadwell thank you!
Thats sick bro! Thanks for sharing.
if i drove my truck in a 30ft ditch it wouldnt sit as low as that beast!!!!!!!!! ha ha love the truck! cool name and i like how he done the bed floor!!!!
Thank you.
Bed floor is super slick!
I love this truck....
I’m pretty sure I just seen this truck at Mini Nats in Maggie Valley couple weeks ago.
Awesome truck
Yes you did!
Awesome video brother! Keep Em coming
Thanks, Charlie! Definitely will.
When you get a chance check out my 85square body brother 👌🏽
Y'alls builds are sick
*and your friends builds too.
Beauty
Just trying to shine a little light on the East Coast trucks.
No doubt.
My 83 makes the same exact noise when i open and close the doors
New Subscriber...From Indiana...😎✌..Can't wait to catch up and enjoy from here on out ..👍. Thanks Glad I joined.... Diffenlty... Getting that Awsome Gear .. Thanks..😎🤘✌👍🔧
Thanks much! Glad to have you as a part of the Whitlock Garage / UNITED BY TRUCKS Community.
Thanks.. Diffenlty Appreciate....Much Respect.🔧🤘
Whooo😎✌Just ordered Some Awsome Shirts and hoodies ..Thanks forgot to get the stickers will have to order again...🤘🔧🤘🔧✌
Sexy Sticker...👍🏁👍🏁
Whoooo. Just order stickers THANKS ✌
Love the truck
Me too!
Sick truck!! Wanted to buy a sweatshirt but not all truck owners are 2XL compatible. Any chance of ordering bigger sizes?
Thanks! At this time, those are the only sizes available. I'm looking into more size options.
One could always draw a horizontal line along the length and cut the entire body. The driver and passenger could recline in the prone position. The wheels could be 45 inch with super low profile.
Well thank u an the wife so much...
haha thanks
Like the truck that's why I got a yard full of them and 4 bay garage too
Same. lol
I love the brown and white truck you dropped of at your buddy's house and that fact that his wife bought him for it...I want a truck just like it..find me one and I will buy it
haha I'll see what I can do. New episode coming on that truck in the next 48 hours.
Had a 1979 Chevy C10 Scottsdale for a work truck but not as cool this one. Congrats on getting to 1000 subs, still working on ours.
Thanks, man! It's been a fun run and we're planning to keep stepping it up!
Can these trucks be bagged without the wheel alignment steady changing, towed in an towed out', when the body is adjusted at different heights? Phillip Hall
I mean sorta. Set alignment at ride height but yes it will change as you go up and down
Love this truck!!!! More bagged trucks please!!!! Lol
Bagged and buried 73to87 GM squarebodys are dangerous (boomers exploding & burning) and just like all GM trucks the least reliable rust crap so yes bury it
Albert Molina me too! We’ll bring them to you as we can. We like ‘em all so they’ll be a diversity of trucks shown on this channel!
Brad Zimmerman unsure how to even respond to this. How about, let’s stay positive. 👍🏼
Brad Zimmerman stoked for more videos I love them bagged dropped lifted or even stock can’t wait 👍🏽👍🏽
KELLY.LOVE.CHEVY
TURCK.BIG.350
That color is cool
Yuba Gold!
Hi, I'm doing my Brother's 84 C10. He passed away and I'm going to finish the mid. He installed air bags. Did you cut your rear bed and remove your front fender wells? Looking for a good write up. Thanks
Question for u y'all only do c10s are do y'all do all trucks because I got a 1991 s10 ex cab with a old school 350 motor in it
Kevin Ordoyne man, my first truck was a ‘96 s10 shorty with a 4.3 Vortec, lowered on 17s. Miss that truck! To answer your question, no, we’re mostly about GM trucks and c10s bc that what we own and our friends are into, but we’re United By Trucks here so, at the end of the day, it really doesn’t matter as long as its cool.
Where you held up at it looks like I've seen that street before I'm from tennessee
Metro Atlanta area - Marietta, GA
👍🏼👍🏼 No Regrets 👌
They've got some great GA members, that's for sure.
I need more info on that s10 front clip!!
My wife is going to issue a Cease and Desist order due to you guys giving me a hankering for a square body. I guess if I have to have a crush on a truck I picked a pretty good one....
So true, Matt! I feel like my wife feels that way every time a new truck pulls up in the driveway - mine or otherwise. :)
What wing mirrors are these guys?
like this truck man wish i could have seem the motor, but great video
terry bigchopz guest it’s still in the “under construction” phase. More to come on this truck and we’ll bring it right to you.
Whitlock Garage wish I was in the area so you could put my truck on your channel
Hey I'm looking at dropping a 81 chevy on the ground what is the hold ups to do so
Amigo te sigo desde venezuela c 10 chevrolet posseo una
Love the truck but ya gotta lose the rear bumper for a stock chrome one, and chrome up front as well...
slag man that’s the way the truck came. Jeremy likes it like that, and i do too.
Other than it looks like it needs 4 inch wheel spacers all the way around… it’s definitely a sick truck!!! 🤙
And to think. Now you’re at 60k subs dang now we need to hit 100k subs
Working on it brother!
Beautiful truck! Anyone know the color code?
Not right offhand, but I do believe it's considered ochre and white (521) and was also around during the 67-72 year trucks as well.
yall need more trucks let me no i can find them ,Gastonia NC
Thanks! We don't have enough money for all the trucks that come our way now.
How much
Nice truck.
Yes, Churchill has a really cool truck!
I just don't get why that's so popular right now. I'm so proud of my stock ride height and stock wheels.
I like that too. Don't get me wrong, but I absolutely love a slammed c10 with big wheels.
At least you are in love with your truck that's the important part
My chevy Silverado k10 short bed leaking oil and I just had it rebuilt
Happens to the best of us!
That's how you check oil in a Chevy no oil under it no oil in it lol 😜 just kidding I've got me a 77 and she needs lots of love And I give her all I can
Where can I buy that sticker? 😬 I want that bass sticker
No idea on the bass one but we'll have new ones up on www.unitedbytrucks.com tomorrow.
Very cool 😎 truck!! But is it like “rust turd” or like mustard, rusturd?
haha you got me with that one.
It's definitely a rusty turd, or at least it is to my wife, she named it. hahaha
Awesome Squarebody! I'll tag you on Instagram when my sticker gets here and I get it installed on the '78.
WarBeardTheRed please do! Should be any day. Mailed out on Monday, i believe.
Hey everybody I just wrecked my c10 stepside sqaurebody in the front. It was a show quality truck before and I want to piece it back together. Does anyone have a good donor front clip for the second generation sqaurebodys?
Man, I hate that! I don't have anything for a 2nd gen squarebody but you shouldn't have any trouble finding quality used parts on Facebook marketplace.
@@UNITEDBYTRUCKS Thanks buddy
Dang... Nice beard, bro
haha thanks!
sweet...! show some under the hood footage , love the channel ...!
1100gauge it’s still under construction but coming soon in a follow up video.
1100gauge and thank you!
I like the look of the truck even paint and patina.I just don't care for the whole bag set up I need that stiff rigidity with my lowering for planting huge horsepower!
Fair enough!
How did you mount the steering wheel on the wall?
If i remember correctly, I just ran a Nail through one of the horn holes in center and put center button back on.
Hey how are you guy doing I was wondering did you guy have anything for sale 67-72 ,79-74 swb
We do, but depends on what you're looking for. If looking for something specific, please email unitedbytrucks@gmail.com.
Wow!!!!!
Stud truck
🔥🔥🔥🔥
I'm here
Me too
Bad ass!
Love Churchill's c10 ! Need to do a whats in the driveway on his daily which is super nice !
Check out my channel !
Its literally skating on thin ice...
No doubt about it!
Open the hood so we can see how he tucked those monsters up front...
We're gonna have a follow-up video where we go in-depth on the suspension set-up a little more. Jeremy wants to freshen up the engine bay a bit more before we do.
Whitlock Garage thanks for the reply...
Who raised the bed on this truck???
Wheelbase too narrow. Some spacers will change that
Helps turn low
@@UNITEDBYTRUCKS I understand but looks wierd imo.
PUERTO RICO TE ESTA VIENDO
This looks like gta5 yosemite
I trade my 1979 gmc short bed 454 Motor for 1967 Ford f100 short bed just because the gmc is so uncomfortable the seat is to close to the steering wheel and I’m only 5”8 and in the f100 is much better more room when seated
Y'all do way to much customizing to these classic trucks. They looked good the way they came out back in the 70s and 80s
you showed everything except for the motor lol smh....still a nice truck!
He wasn't quite ready to show it. Engine compartment in under construction.