Yet another thank you. My problem was in two parts. 1, the VAGcom came with a disk which I couldn't get to work (load the driver) so as you suggested I downloaded from the ross-tech site - which worked fine. 2, You showed how to change the COM port, mine was reading 7 - so I changed it to 2. Then it all worked fine.
Worked perfectly with my $20 Amazon VAG KKL adapter in a 2009 Audi A4 Cabriolet 8HE. Didn't need to use the convoluted drivers that where on the CD it came with. Successfully managed to recode my Symphony II+ radio with it to enable Aux input.
There's a good chance that VCDS-Lite will not work on any VAG vehicle post 2004. (I don't think that VCDS-Lite software has been updated since the early 2000s.) VCDS-Lite uses what is known as a dumb cable. The full paid version required a special cable incorporating a dongle to stop piracy. That dongle not only ensured that the the copy of VCDS was legitimate by checking the license when it went on-line but if not it corrupted the cable. Hence saying that you should turn off all network connectivity when it is connected. The latest version of VCDS appears to use Bluetooth to connect from your laptop to the OBDII connector doing away with cables completely.
VCDS Lite only works with 2005 and older cars according to Ross-Tech.. is that true? (I wanted to use it to change some of my settings on my 2012 VW T5) ?
Hey,a bit of help here. This is where am stuck.... Port Does Not Exist, Interface Not found. I've tried switching between COM1 and COM2 since COM3 and COM4 are in use , but outcome is the same when I press Test!
I’m trying to get one to turn off Day Running Lights and turn off the driver’s seatbelt light which constantly comes on bc of a malfunctioning sensor. Can I access those parameters with this?
With VAG COM lite can I activate basic things to a 2009 Audi a4 prestige, such as open/close windows with unlock and lock buttons on key, concerning fog lights, Enable Ambient Interior Lighting Control, needle sweep, adjust LED brightness.
hello, i just installed a rear camera on vw amarok 2014, i have to buy a cable to activate it, could you give me an amazon or ebay link able to do this please?
Hei! Jeg ser du har samme utstyrspakke som meg på Audien din. Jeg er litt irritert over at den ikke viser forbruk (L/100km). I de andre utstyrspakkene så ligger dette på både rattet og på en knapp på vindusviskerkontrollen. Men spørsmålet blir altså om det er mulig å låse opp forbruket som en feature ved bruk av VCDS Lite for å få det opp på førerdisplayet?
you should put a link to buy the vcds lite licence, i bought it after watching this. $99 0r £78 in my case best buy ever. i had to bleed abs pump on my mk4 golf. now i can put my windows up and down with my key fob.
Thanks a lot, I have my ebay cable setup correctly with my 2003 Jetta Diesel. When I open VCDS-Lite, I click on "Select" in Control Module, then click on "01-Engine", it tries to communicate and fails after a few seconds and shows an error "too many errors...". Any idea how to fix that? Thanks.
Hi i have PROBLEM not work CAN, i don’t no but ENGINE work the led is green, cable is HEX+CAN Ross-Tech, can not get in (Central.Elect.09) but in (Central Conv.46) yes can. I installed the driver, all working the only thing, I can not get in Central Elect. Someone has resolved this problem ? My car is Passat b5 2003... Can someone help me ? Thank!!!!
Will the VCDS program clear the transmission memory? I installed a new valve body in a 2005 VW Beetle 1.8L T 6 speed auto and I need to re learn the transmission.
After installing the drivers and doing everything l can't find the cable in the device manager. Or rather is does not show as port but under other units then USB2.0-serial. what does that mean? Can't update drivers manually by choosing the folder, please help
Hi sir your cable is which chip use can you say me pls ftdi or ch340 ? Because we are com port name is nothing ch340 this writing is usb serial port ı want to coding and my on vcds program is not write the coding writen is recode for coding which chip to prefer can you help me thnx
@@kruskotv1311 There is big business behind car repairing, people don't want to tell about what they know. It's nearly impossible if you don't have good contacts by any luck. Opaque domain
have you got the cable in to the car? i got this error until testing whilst connected to the car. check device manager / ports / look what number port it is 1,2,3,4, etc, then make sure you test with the correct port selected. I have a £5 ebay cable and a licenced VCDS lite, i can do everything i need with that
Does VCDS Lite work with 2006 Audi A3? Looks like you have an Audi of about that year in the video. I was told my A3 was too new to work with VCDS Lite and the KKL cable
@@danieldavis4334 it won't work. The '06 A3 is based on the Mk V VW Golf/GTI platform and electronics. The VCDS Lite app only works up to Mk IV. I had to buy the $200+ software and cable from Ross Tech.
Hi, i had the same problem. I download the driver from link in description, then i run Driverhub. Drivierhub find this driver and we just need cilck "instal". Computer must run again and now, in device manager the cabel is reading properly. Try this, maybe it would help to you.
VCDS-lite has limited functions vs full version. U cant adapt or recode modules with lite. U can check fault codes and clear them. VCDS-Lite shows all the DTC's but gives description only on 1st faultcode.
Hello when i plug my vgl kkl 409.1 cable into pc it doesnt places on ports it places somewhere and it haves yellow triangle up and name of it its usb 2.0 serial can you please help me?
Yet another thank you. My problem was in two parts. 1, the VAGcom came with a disk which I couldn't get to work (load the driver) so as you suggested I downloaded from the ross-tech site - which worked fine. 2, You showed how to change the COM port, mine was reading 7 - so I changed it to 2. Then it all worked fine.
Sou aqui do Brasil , eu li o seu comentário e tive o mesmo Problema , mas resolvi vendo este Vídeo ..
did you have to pay for a serial key to use the program?
The only video from the last 10 that did worked, thumbs up!
Worked perfectly with my $20 Amazon VAG KKL adapter in a 2009 Audi A4 Cabriolet 8HE. Didn't need to use the convoluted drivers that where on the CD it came with. Successfully managed to recode my Symphony II+ radio with it to enable Aux input.
do you have windows 10 ?
@@theforestlizard223 yes and it worked fine
@@justinwiden can you send me the drivers in a email , i cant get this to work and i dont have the cd
@@theforestlizard223 you don't need the CD, I only used the drivers he provided in the video and it worked.
@@justinwiden maybe my cable is bad or something because my pc cand se this as a port
Thanks mate! Got it working. I successfully tested the interface in VCDS Lite only after connecting it to the OBD II port and starting the engine.
But can you make modifications?
@@Passion4everCRazy It only works for erasing fault codes and reading diffrent values from your car's sensors.
@@sergiutamas1896 can you use the measuring blocks function?
There's a good chance that VCDS-Lite will not work on any VAG vehicle post 2004. (I don't think that VCDS-Lite software has been updated since the early 2000s.) VCDS-Lite uses what is known as a dumb cable. The full paid version required a special cable incorporating a dongle to stop piracy. That dongle not only ensured that the the copy of VCDS was legitimate by checking the license when it went on-line but if not it corrupted the cable. Hence saying that you should turn off all network connectivity when it is connected. The latest version of VCDS appears to use Bluetooth to connect from your laptop to the OBDII connector doing away with cables completely.
VCDS Lite was last updated to ver 1.2 in 2012
VCDS Lite only works with 2005 and older cars according to Ross-Tech.. is that true? (I wanted to use it to change some of my settings on my 2012 VW T5) ?
this is true. Worked 100% on my 2004 MK4 GLS, but did not work on my 2012 Golf R
Is there any way to make it work on Windows 11?
i install correct way but still doest recognize the usb. what to do mate?
After i plug in my cable and I go to device manager, My Cable still just reads as "USB Serial" In other devices. So I'm guessing this didn't work
Can this cable work with the full version software?
Mine does see it as usb not as a com port. What to do?
My device manager doesn't recognize the port at all even after installing the driver. WIN 10 + blue KKL cable. What should I do?
Hey,a bit of help here. This is where am stuck.... Port Does Not Exist, Interface Not found. I've tried switching between COM1 and COM2 since COM3 and COM4 are in use , but outcome is the same when I press Test!
Hey. What to do if the cable is not showing at com port? I can only see it at Universal serial bus connectors. How do i add it to com ports?
Since it's a VCDS Lite : is it possible to activate options like corner lights or not please?
I have the same cable, didn't you insert the disc into the computer to download the software??
I’m trying to get one to turn off Day Running Lights and turn off the driver’s seatbelt light which constantly comes on bc of a malfunctioning sensor. Can I access those parameters with this?
With VAG COM lite can I activate basic things to a 2009 Audi a4 prestige, such as open/close windows with unlock and lock buttons on key, concerning fog lights, Enable Ambient Interior Lighting Control, needle sweep, adjust LED brightness.
crazy my 03 passat came standard w that. 2013 had to play vw tech for a day to get it back lol
the Ross-tech download page clearly states that VCDS-Lite 1.2 is for cars older than 2005. What do I do if my car is younger?
Wait for it to get older
@@sebastianwoloch2236 LMAO.. Good answer... Andrews can pay ross for the real VCDS or try the A30m.
hello, i just installed a rear camera on vw amarok 2014, i have to buy a cable to activate it, could you give me an amazon or ebay link able to do this please?
Hei! Jeg ser du har samme utstyrspakke som meg på Audien din. Jeg er litt irritert over at den ikke viser forbruk (L/100km). I de andre utstyrspakkene så ligger dette på både rattet og på en knapp på vindusviskerkontrollen. Men spørsmålet blir altså om det er mulig å låse opp forbruket som en feature ved bruk av VCDS Lite for å få det opp på førerdisplayet?
Æ har Vag kkl 409.1 kabel fra aliexpress, men finn ikke den gamle vag com 409. kun vcds. har du brukt den gamle 409?
Do you think vagcom lite could show the real km of the car?
you should put a link to buy the vcds lite licence, i bought it after watching this. $99 0r £78 in my case best buy ever. i had to bleed abs pump on my mk4 golf. now i can put my windows up and down with my key fob.
does it works with other cars ???
Muchas gravias por la informacion excelente video god bkess you bro
Thank Bro ! a great video !
Thank you very much.
Would love to see more videos
Good video, the links still work...
Thanks man! This helped a lot!
I have the same cable from amazon with a disc, you don't have a disc, I can only use a cable and I have access to vcds fuul diagnosis
which cable do you recommend? can you please share a link to it?
Thanks a lot, I have my ebay cable setup correctly with my 2003 Jetta Diesel. When I open VCDS-Lite, I click on "Select" in Control Module, then click on "01-Engine", it tries to communicate and fails after a few seconds and shows an error "too many errors...". Any idea how to fix that? Thanks.
Hi i have PROBLEM not work CAN, i don’t no but ENGINE work the led is green, cable is HEX+CAN Ross-Tech, can not get in (Central.Elect.09) but in (Central Conv.46) yes can. I installed the driver, all working the only thing,
I can not get in Central Elect.
Someone has resolved this problem ?
My car is Passat b5 2003...
Can someone help me ? Thank!!!!
Hello I have it working but do I need to buy the program and where to be full version so I can save codes...
Will the VCDS program clear the transmission memory? I installed a new valve body in a 2005 VW Beetle 1.8L T 6 speed auto and I need to re learn the transmission.
Did it work
Hey has someone used this to reset the inspection reminder?
Hi there it's there any chance to download it differently because isn't working for me? Thanks
After installing the drivers and doing everything l can't find the cable in the device manager. Or rather is does not show as port but under other units then USB2.0-serial. what does that mean? Can't update drivers manually by choosing the folder, please help
I have the same problem, I think it's because you might have Windows 11
It says no response from controller I need help thanke
Hi sir your cable is which chip use can you say me pls ftdi or ch340 ? Because we are com port name is nothing ch340 this writing is usb serial port ı want to coding and my on vcds program is not write the coding writen is recode for coding which chip to prefer can you help me thnx
Which version of VCDS Lite did you use?
I can Not install the driver for the cable.. it says installed but then Windows says its not right installed
Thanks so much it worked
Hello ! I tried with vcds and with vcds lite and its not working with the ports
thanks thanks thanks very good video
Can I use this Ebay cable with nu Polo gt tsi 2022 Model?
Would I be able to use this tool to power my dashcam
Will this cable work with golf mk6 tsi ? 2012
good man great help
Mine says interface not found?
Can i use this cable to flash ecu as well?
Any update?
In for info
Is it considered as a third party cable so it have less functions or it's spoofed as an official cable to do the same things as the real one ?
Any luck finding the information you asked for here ?
@@kruskotv1311 There is big business behind car repairing, people don't want to tell about what they know. It's nearly impossible if you don't have good contacts by any luck. Opaque domain
i keep getting "no response from controller"
the test is success though
Asif Kruz did you fix it?
Asif Kruz those cables only work on older cars.. you need a can cable for newer vehicles
have you got the cable in to the car? i got this error until testing whilst connected to the car. check device manager / ports / look what number port it is 1,2,3,4, etc, then make sure you test with the correct port selected. I have a £5 ebay cable and a licenced VCDS lite, i can do everything i need with that
can I use that cheap cable for my 2016 US Spec Jetta ?
no...u need (not "KKL" u need "CAN" type ) i sucked this with my car :D
Site mentioned for drivers download does not open. Any alternative?
Use a VPN. worked for me
DOES THIS WORK FOR 2009 AUDI A5, please help. Thanks
Does VCDS Lite work with 2006 Audi A3? Looks like you have an Audi of about that year in the video. I was told my A3 was too new to work with VCDS Lite and the KKL cable
Did you ever find this out as ive got a 2006 a3 and wanted to try the vcd lite
@@danieldavis4334 it won't work. The '06 A3 is based on the Mk V VW Golf/GTI platform and electronics. The VCDS Lite app only works up to Mk IV. I had to buy the $200+ software and cable from Ross Tech.
I did everything and it still won't work for me
i have a 2015 jetta with this same setup but it doesn’t work. anyone have any tips to help me please and thank you!
good video.thanks
hi ma
epay version do i need to register it
and what the limitation
Can you use it with the full version?
No, you´ll get an interface error.
thank you for the video
is there a way to get this to work with vcds? (not vcds-lite)
Piano Tutorials no
@Aba Garage Could you give me hand with somes problems im facing?
Does it work with Windows8 b4 bit?
Thanks 👍
Can you read the real km in this vagcom lite?
No
Thanks Brother!
Does this work for skoda superbb 2017
Anyone know if VCDS lite will work on a 2005 VW Polo MK4 9n?
im having issues getting the driver to work, any help would be greatly appreciated
Hi, i had the same problem. I download the driver from link in description, then i run Driverhub. Drivierhub find this driver and we just need cilck "instal". Computer must run again and now, in device manager the cabel is reading properly. Try this, maybe it would help to you.
Have Touran 2004 there is no in this list. What do I do when I have a problem with the steering wheel?
you need vcds 10.6 and higher version with can bus communication. version in this video is for vehicles without can bus.
i just can't download the driver sadly
nice video but doesnt work for my 2007 audi b7
I just subscribed thanks
Can you code with VCDS Lite?
Hello, does this cable also work with Vag Tacho software?
yes
@@jeffatmama6701 where can you get the Vag Tacho Software that will work with this cable?
I’ve got an mk6 golf and I keep getting an error “no response from controller”
2004 mk4's are the newest ones you can use these things on.
Did you find one for your MK6?
Jack Clancy did you fix your error? I just made the same mistake with my MK6 and now my car won’t start.
Tusen takk. Derre ska æ prøv. For æ får verken ross-tech klonen eller elm327 usb te å virke.men no kanskje æ får Elm te å virke på vcds.
Legend
Where's the link to this site
send me the link for the cabe
best instructions thanks !!
can i use this method to adjust my start/stop VW to accept a more powerful starter battery?
Hvor holder du til
does this work on new cars?
X2
@@corneliosilguero2010 wat u mean by x2
Port status: OK
Interface: Not found.
help? :( I have a Scirocco from 2010
Maybe it's not compatible. Those 409.1 KKLs are not working with Golf 5 or newer.
@@funkblack so which cable will work with all newer models? Thanks
I think VAGCOM 20.4.2 can be used to VW cars up to 2020.
What is the Difference beetween vcds and vcds lite with a cheap cable??
VCDS is full version and VCDS lite is free but limited functions.
What are the "limited functions" What can't the lite version do?
VCDS-lite has limited functions vs full version. U cant adapt or recode modules with lite. U can check fault codes and clear them. VCDS-Lite shows all the DTC's but gives description only on 1st faultcode.
Does lite show your transmission level temperature for DSG fluid change?
yes
can I get the d+kan cable to work for this
thaks a lot
Did you pay for the full version does it work on Windows 10??
Nice
Not worth the headache for a POS Audi TT anyways, I'm going back to Honda
🎉
when I press to test "interface not found" ???
Start all over, check all your drivers etc and your com, then try it again.
Same problem please someone help
Mine also does the same ,ie ports ok but interface not found is my cable not working so i quickly return it
Thenk y
Hello when i plug my vgl kkl 409.1 cable into pc it doesnt places on ports it places somewhere and it haves yellow triangle up and name of it its usb 2.0 serial can you please help me?
It's probably because you have windows 11 and max is 10 pretty sure
👍👍👍
site is restricted
I'm, so sorry but I don't understand...