Great video! Your instructions on creating a safer base for the handheld cutter are very clear and practical. I love how you explain each step in detail. Can you suggest any other modifications to improve the safety of handheld cutters?
Also, if it gets loose, it will hinge against the bolt and crash the blade. Those little cut-off wheels explode when they break at those RPMs. I use them a lot, but don't think I will be doing hacks like this.
Когда отрезок прутка, длиной менее 5 мм защемит между диском и стенкой паза в этой приспособе - диск разорвет, и машинка превратиться в осколочную гранату ваших руках.
Es increíble pero siempre hay pros y contras en las nuevas ideas…las amoladoras hay que manejarlas con precaución…en lo personal FELICITO a este compañero por este nuevo artilugio para tener mayor seguridad. Saludos desde el norte de México
Nice idea. You could have drilled two smaller holes at the end of the slots and it would have looked more professional. Also put some Hammertone paint! Thanks.
Hello. Thank you very much for the nice feedback you gave me. In the video I used Green Hai Duong cut stone. You can order them on Lazara or shopee, TikTok also has them
![SahBabii - Viking [Official Music Video]](http://i.ytimg.com/vi/D37cL92JX0I/mqdefault.jpg)
Отличная работа💪
Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!
А ЧТО, ХОРОШАЯ ИДЕЯ. АВТОРУ СПАСИБО.
Welcome to Alva Welding channel! Thank you so much for your support
Great video! Your instructions on creating a safer base for the handheld cutter are very clear and practical. I love how you explain each step in detail. Can you suggest any other modifications to improve the safety of handheld cutters?
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Thank you for being able to read Burmese.
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
Great idea, but anything held by one screw only is likely to move when under pressure.
Welcome to my channel! Thanks for your comment. I'll improve next time. Wish you have a nice day
Also, if it gets loose, it will hinge against the bolt and crash the blade. Those little cut-off wheels explode when they break at those RPMs. I use them a lot, but don't think I will be doing hacks like this.
@@RonnieStanley-tc6vi Hello. Thank you for your comments, we will consider improvements and fixes to make them more complete
Your content is great
Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!
Certainly very good idea.. It is safe, accurate, easy & practicable...👌
Bhim Raj Goyal, Barnala
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Просто в изготовлении, эффективно в применении особенно на профильной трубе, спасибо за идею думаю пригодится.
👏👏
😍😍😍😘😘😘💕💕💕
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Когда отрезок прутка, длиной менее 5 мм защемит между диском и стенкой паза в этой приспособе - диск разорвет, и машинка превратиться в осколочную гранату ваших руках.
Que buena genialidad me gusta Dios te dé más sabiduría chao soy Colombiano
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
If you're cutting a lot of small materials, this will be a great auxiliary tool.
Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!
Moro no Estado de Minas Gerais , Brasil . Parabéns ; muito útil!!!!!!
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Es increíble pero siempre hay pros y contras en las nuevas ideas…las amoladoras hay que manejarlas con precaución…en lo personal FELICITO a este compañero por este nuevo artilugio para tener mayor seguridad. Saludos desde el norte de México
Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!
Great idea for safe cutting. Very nice my friend!
Just what I was thinking.
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
Ваш друг не правильно режет.уголок режется от края по типу расчёски для волос и только после от вершины.техника безопасности
I think there’s a reason angle grinder manufacturers don’t fit these to their products, there’s a risk of jamming and disc bursting.
brilliant idea from ireland
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Ottima idea soprattutto per la sicurezza...saluti dalla Sardegna
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Also can keep the cut square on to the material , cool !
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
If you're skilled enough to make that, you don't need that.
Thank you for sharing your feedback and expressing your perspective
تشکر از ویدیو ایده خوبیه لطفا ادامه بده من از ایران هستم 🙏
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Hola yo soy de Venezuela y me gusta mucho la herrería
Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!
Очень безапасно и красиво и отлично зделена маладес. 👍👍👍😃😃😃
Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!
Great idea. Thanks for sharing.
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
This is really usefully ❤🎉
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Молодец браво.. Понравилось.. Гений.. 🙏👍
Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!
Saludos desde México un saludo a la distancia👍 una gran idea👏
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
TE REALMENTE SUA UTILIZAÇÃO NO DIA A DIA!
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
Great idea.
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Très bonne idée..beau travail...je me suis abonné pour votre travail...je suis en FRANCE.
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Good Idea
I am in Brasil, Minas Gerais, Pompeu city.
Thanks
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Com essa peça acoplada a Esmerilhadeira 😊 vc ainda amola suas BROCAS SEGAS
Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!
Desde Lima-Perú, muchas gracias.. 6:55
Welcome to Alva Welding channel! Thank you so much for your support
bagus, teruslah berkarya, from semarang indonesia.
Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!
Türkiye'den teşekkürler...
❤❤❤
Welcome to Alva Welding channel! Thank you so much for your support
感謝您的智慧創作我來自台灣
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Wow! Very Good! High idea! Gratulation!
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Santa cruz da serra ,obgd pela dica!
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
Sou da area aposentado mas sempre aprendendo parabens.
Welcome to Alva Welding channel! Thank you so much for your support
La verdad, me parece una excelente idea!!! Gracias por compartir!!!
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Awesome, great idea. It makes life easy. I will make one myself, to finish my metal project.
Thank you very much. Have a great day.
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Bonne idée un salut de Séte en France
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Excelente. Muchas gracias
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Exelente información gracias por tu enseñanza saludos desde Huamantla Tlaxcala México
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Me gustó el video soy de formosa Argentina😮.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
I like it. I use a 6 1/4 skill saw with cut off wheel for sheet goods and a grinder with your attachment for small bar stock is great
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
I'from🇮🇩✌
Қазсқстан
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
Ide yang bagus terutama untuk keselamatan kerja,terimakasih.
Bravo bro ... Good job
Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!
Thanks ! (Erevan)
Welcome to Alva Welding channel! Thank you so much for your support
BELEZA, AMIGÃO ADOREI A CRIATIVIDADE.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Mantab nih. Bisa ditiru
I'd love to hear if you've tried this idea yourself or if you have any other creative suggestions to share
Great(Thailand)
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Sızın. Fıkırlerınız. Harıka. Sızı. Sevıyorum
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
Excelente! Muito obrigado e parabéns!
Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!
РОССИЯ САНКТ-ПЕТЕРБУРГ!❤
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
Many thanks
DomIJ
Welcome to Alva Welding channel! Thank you so much for your support
Muy bueno y seguro queda el cote . Un saludo de Montevideo.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Muchas gracias por compartir esta buena idea.
Un saludo desde la provincia de León (ESPAÑA)
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
great idea and skills , thankyou . NZ
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Best cutting machine
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
I'is great video
I'm from yemen
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Good idea
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Thank for sharing and amend when needed upon good advice, appreciate your humbleness.
Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!
Супер,дуже просто і ефективно...я день промучився,роблячи подібну,але набагато складніше приблуду,а тут все так легко... мабуть я тупуватий трішки😂
Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!
แบ่งปันไทยแลนด์🇹🇭🥰🥰🥰
Welcome to Alva Welding channel! Hope you have a good time while watching the video
muy buen video e idea,,,,felicitaciones
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Great, Greetings from Dar es Salaam, Tanzania.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Like the vice made out of sprockets in this video. Anything on how to make one
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
Still looking for details, not sterile automatic thanks 😡
Чётко всё и с размером 👍
Нашёл в гараже кусок уголка аллюминия, но 40мм (((
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
такая же история )) 40мм алюм ! но гдето был видос китацский , ставили 40мм хз!!! попробую
Amazing👌
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Excellent very good job
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
oye amigo excelente tu accesorio de seguridad adios genio
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
Nice idea. You could have drilled two smaller holes at the end of the slots and it would have looked more professional. Also put some Hammertone paint!
Thanks.
Welcome to my channel! Thanks for your comment. I'll improve next time. Wish you have a nice day
เป็นกำลังใจให้ครับ
Welcome to Alva Welding channel! Thank you so much for your support
Muy buena idea😊
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Sou de jacobina, parabéns.
Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!
Muito boa ideia parabéns. Diga-me. Que marca é este disco de corte e onde consigo?
Hello. Thank you very much for the nice feedback you gave me. In the video I used
Green Hai Duong cut stone. You can order them on Lazara or shopee, TikTok also has them
❤ ممتاز
Welcome to Alva Welding channel! Thank you so much for your support
Tuyệt vời, cảm ơn bạn
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
excellent
Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!
สุดยอดครับพี่..
Welcome to Alva Welding channel! Hope you have a good time while watching the video
ข้อ ข้อสำคัณ น๊อต ยึดฉาก ร่อง..อย่าได้ คลาย เชียว....ต้องหมั่น..ดู...บิดเพียง นิด..สบัต ใบ แตกได้... 🙄🤔 ดี แต่ต้อง หาทางยึด อีก ตำแหน่ง... จะทำตาม หละ..👍🙏
Hello! thanks for your comment. Wish you all the best!
Me gustaría pusieras en marcha un video sobre la prensa que usas
Hello. You want me to work on the documents I referenced during the process, right?
Jambi, Indonesia
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
好方式
Welcome to Alva Welding channel! Thank you so much for your support
Amazing! Thanks for the good share and good luck always.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Great idea bro!
That clanping jig seems a novel idea!
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
Boa ! Sou do Brasil
Welcome to Alva Welding channel! Thank you so much for your support
Excelente
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
Saludos desde Temixco morelos
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
روعة جداجدا
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
Надо было вечером смотреть.
А так, посмотрел с утра и надо идти делать такую штуковину.
Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!
on todays episode of dangerous things todo with a grinder
Thank you for sharing your feedback and expressing your perspective
Rất hữu ích. Bạn nên kèm theo tiếng nói hướng dẫn nhé
Welcome to my channel! Thanks for your comment. I'll improve next time. Wish you have a nice day
thank you very much friend very usefull. God Bless You. watching here in Phillipines.🇵🇭🇵🇭🇵🇭
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
You give me an idea my friend I will do the same jig on my grinder but convert jig into driil bit sharpener
Muy útil....
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
👍
Parma, Italy
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
I think you should have flipped the angle iron so you would have a better fence
Hello! thanks for your comment. Wish you all the best!
Ótimo trabalho
Welcome to Alva Welding channel! Thank you so much for your support
Так! Норм! Можно використовувати!
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
Eso es un peligro... Para ser seguro necesita 2 puntos de anclaje
Thank you for sharing your feedback and expressing your perspective
Eu gostei dessa morça
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
I, m from Iraq
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best