dstv signal problem from your dish,how to fix dstv no signal dstv specialist Johannesburg

on this video I will show you how to fix your dstv signal without satellite meter by yourself.
Make sure to Subscribe to my RUclips channel and click the notification bell so you are notified every time god bless.
multichoice south africa , how to install dstv in Johannesburg, the best signal of your DStv,have a good dstv cable in Johannesburg,dstv aircon media is your DStv specialist in Johannesburg, your can repair your DStv by yourself, for your DStv signal go to DStv and aircon media, is preferable to contact a accredited installer for your DStv repairs, a solution for a E48-32error no signal on your installation, you can have at Brixton Johannesburg your accredited installer, great to upgrade to DStv explora, we are your DStv local installer in Johannesburg, for all your DStv problems contact DStv and aircon media, the loss of DStv signal could be fix by yourself, we go the best of smart LNB for your installation, the damage of the LNB could be the your problem, do your extra view and extra point by yourself, DStv alignment can be useful for your installation, a new DStv decoder ultra will make a big difference on your installation . subscribe and share this video ,thanks for watching.
WhatsApp [phone] in Johannesburg
www.mrappliances.co.za/[e-mail]
• How to solve dstv E48-...
/ dstvandairconmediaalpha
don't forget to subscribe and like my video thanks god bless
www.mrappliances.co.za

[@SiphesihleMkhabela-io7bs]

Me being me not wanting to pay😂 I just watched this video. In 2 Minutes I solved the outdoor signal problem😅
Thank you sooooo much. I just saved R800 in 2 minutes

[@Razwill24]

Thank you. My LNB was damaged and when I replaced it couldn’t get network till I watch this video that I must turn the LNB 4 o’ clock and worked. 🇿🇦

[@butterfieldsa247]

Thank you sir,Your video still does wonders even now God Bless🙏🏿

[@emmanuelamin9206]

Thank u sir I just fixed a problem of signal lost on my Dish less than 5 min night after checking your video and now I'm enjoying. All the way from Tanzanian (East Africa) stay turned

[@johnkahts7698]

A very concise video moutlining exactly what is needed on the event of E48-32 situation. Thanks for your explanation. My wife is happy.

[@toroaderele6649]

Great video. Saved me a lot of money. Thank you :)

[@nthatimokhele8212]

Thank you for the explanation and demonstration.

[@liso6998]

Thanks Man, I'll check outside tomorrow cz I've been trying to set it out all night.

[@edwardgaring3900]

Thank you so much. I was able to fix E48-32 using your video

[@fokoumedia]

Thanks for watching

[@siphokazigcwabani2416]

You are the bestThank you may God bless you I will diffinetly inform many of my colleagues of this channel you just restored my signal

[@fokoumedia]

Thanls for watching

[@crispengari9237]

I chanced an LNB putting a new one, and this video helped me, all I have to do to get the signal was to tilt the lnb

[@juriepretorius4617]

Thanks for being there for us all, thankful we are thanks bless you for your time and help,I will love to work for you that will be a blessing for me,but I am from South Africa Pretoria- Hermanstad,if I can work for you from here,how and where, please please please reply to this, thanks GOD BLESSED YOU 😂🇿🇦

[@paawillie6900]

New here, keep it up, I learnt a lot about technical terms👍🏾😍

[@khutlangmotjetje9581]

Ola

[@xolanimanyike6056]

Sir thanks alot I wanna thank you for sharing such information
I had a signal problem I called this guy to come help but he didn't make it in time reason why I don't know
After I watched your video I tried what you showed us then just like that I was connected again thanks alot sir much appreciated 👍🏽

[@juriepretorius4617]

I will do all off that what you say hear now, you are my real life hero you now what you do.

[@dylanmaphori3898]

Very helpful, thank you sir

[@simisondebele5867]

Thank you very much for sharing your information my good Sir.God bless you

[@fokoumedia]

Thanks for watching

[@m.falcon3728]

Thanks bro👍
All the saudi thank you my frind

[@BJ41JT]

It's 2023.But this video is still applicable. Thanks Mr Technician. 🕵️⚙️

[@edwinmatukutire2556]

Thanks man have a happy New year

[@floramakgatho3452]

Thank you sir this video was very much helpful

[@annethorne3810]

Hi guy you very good explain tnx

[@pillarntsikayezwe7755]

😭👊🔥Ur video helped me alot

[@siyonijacisa4117]

Just got help by this video !! Thanks!!!!

[@fokoumedia]

Thanks for watching

[@user-gi7ll3iq3k]

Thanks for your help🙏

[@girlymothibi6648]

Thank you very much sir. You helped me a lot.

[@fokoumedia]

You are welcome

[@tubzvermeulen]

Thanks for the video

[@ChristopherKatongo-vg8bt]

Nice One 🔥🔥🔥✌️

[@fokoumedia]

Thank you for your appreciation

[@FransFrans-rf2mn]

Thanks man

[@user-bh4xj3js2k]

Thanks very much sir

[@ericmabasa4793]

This is good. Keep it going.

[@dariaisaks3961]

Sir can you cut the videos a bit short to necessary info because the explanations are to long and DIY are almost too short

[@nonsookoye3163]

Thanks 🙏

[@noxolomhlanga9681]

2024 Jan 16 🎉🎉🎉 Thank you so much 🎉

[@fokoumedia]

I appreciate your support

[@El_Timon]

Thank you

[@sibusisomhlongo6123]

Thank you so much sir your content I very helpful ❤🙏 God bless you

[@juriepretorius4617]

This friend of as are really good at what he do 10 out of 10

[@Mwixys]

Thanks.. the negative was touching the positive.. very helpful

[@ebinazielkandomo4216]

Well clarified

[@pmmukanga6725]

Got it, it's a 🌲 4me... #Thanx

[@sirajosanusi5798]

Awesome 👍

[@fokoumedia]

Thanks for the visit

[@emmanuelamin9206]

Your so goo for this sir

[@fokoumedia]

Thanks for watching

[@seraphineelel7603]

Bonne vídeo

[@fokoumedia]

Merci ma belle

[@helenezekiel-hart2561]

Thanks sir. Am using a HD decoder. Since the installer came to install it. I have been having signal problem.

[@albertusphilander-eg9kz]

110% thanks

[@juriepretorius4617]

Can I use my old DStv dics for ovhd.

[@lebotsh7022]

Please show us how to connect remote link eye and blaster wireless one

[@sithembisombuyazi9152]

Thank you sir for that nice explaination but my problem I'm having is that some of the channels stops for signal problem while others are working well please help me what must i do on this situation

[@fokoumedia]

Hi if you are using only one decoder on that case you may not have a good signal strength check the setting of your dish or call a dstv technician for help

[@stonegraphicclonestudio5420]

Thanks bro

[@fokoumedia]

Hi you are welcome thanks for watching kindly share the video

[@stonegraphicclonestudio5420]

@@fokoumedia I done it but the sound n pictures are stucking what's to do?

[@user-nj7cy5dh9g]

Thanks I need a technician shame

[@juriepretorius4617]

Thanks that I now allredy.all I want was ovhd degree, in the LNB, the i.t man said he didn't now what the home.n hell I have done all I can but no channel but it work at a friends house but by me no luck 😢but a am open for advice ,

[@henrybaibai214]

In Sierra leone when ever it's raining or a heavy wind when always have no or poor signal

[@siphosoxologift7030]

Video was Ideal but you have forgotten to tell them that it's only accredited installer's are required to perform this skill.

[@danielchan1395]

just bought a new dish with the smart LNB, but after mounting the dish, i have no signal. Could be that the LNB was not set to 4 O'clock position.

[@nazierw]

Good evening my brother. I have followed your channel to install extra view with my HD decoder 4u. After the installation was finished the steps to create a heart beat from my explora 3a to my hd decoder 4u. I had perfect signal and quality for 2 days after I phoned dstv to activate my extra view. Then today all of a sudden it just went to error code e30-4. The call centre can't help me. Please can you give me advice

[@eneojolevi6712]

Send the decoder number let me help u

[@michaelmakgobola6130]

My Guy you are so good, on point with the presentation. Keep up the good work , You are blessed.

[@juriepretorius4617]

I need the degree and setting pls for sale Pretoria, please help me please 🙏

[@melcolm8814]

Thanks my guy I was replacing the LNB and I had no signal because it was not 4 o'clock.😊😊

[@isaaconalo5685]

Skip to the point

[@AAMsiya]

I have a signal problem it's showing scanning in progress since .I called a Technician he said my LNB is damaged but when he switched it on it's flicking from there it goes back to scanning in progress.

[@sifundohlophe2710]

My LNB is is straight up not facing with the side should make it lay down

[@reubensinkololwe5298]

How can I get in contact with you sir

[@juriepretorius4617]

I have to learn myself all off this no money to go study for it,so it's diy like you say, that is part of my income but I need to learn more to can do more, I learn a lot from you so I can say thanks for all that you do for us ,you are a master it on this things thanks for that,📡👌👍👏

[@juriepretorius4617]

I have a no channel problem pls help,

[@salvationikechukwunnebudum3883]

4:00 pm for whate nigeria

[@nombulelo1775]

Pls help im stuck on signal instoltion

[@constancejonas4245]

my decoder stacked to 100 I don't know what the problem is

[@fokoumedia]

Hi press on the remote 152

[@juriepretorius4617]

That name is see 5

[@royalprince8730]

My dstv tuner 3 is -1 while the other 2 signals are above 80 and sometimes are 100

[@nashonintaki1198]

tumia kiswahili mkuu

[@thamishezi3632]

My dish cable is peel of

[@joshuakinyua921]

Too much talking, get to the point. Focus!

[@flaviusmichael1947]

P

[@cliffmcdonaldaru1618]

Sting bol tok2 tumas

[@theodoreteidjain5930]

Please, go straight next time the introduction is too much and unnecessary

[@alexadevu6079]

Unnecessary introduction. Please go to the point always.

[@tafadzwabanhamombe5037]

Well said

[@edwinmatukutire2556]

😎

[@heersrivastava2635]

Good grief, get to the point!

[@ricardomaduray3642]

Monkey jumped on it

[@sinesipholumbe2529]

Did not help at all

[@jumasemi256]

You talk too much sir and i got nothing

[@ogagzogagz2919]

Massively useless info,.....stating d obvious, nothing technical

[@Silkidiver]

Please , stop talking so much , get to the point !!!!

[@eddieachadinha2221]

Thank you sir

[@Juelz051]

Thank you