Most lavs are quite flat so do a wide ice cream Scoop 500hz by 3-6 db depending on how much bass is coming from your subject, then do a wide ice cream scoop 1k-1800k again depending on how much bass is coming from your subject, then boost your high end 18k-20k 1-3 db, but use a de-esser to reduce shrill high end and unwanted sibilance. Then boost 100hz by 1-3 db but cut anything under 50hz cause that will be just rumble. Hope the helps!
As someone who went to film school and learned how to properly lav people some 20 years ago but who works at a news station and has to mic people twenty times a day I can't tell you how much I both love and hate this. Because yes, you're right this is exactly the right way to do thing, but in practice it's almost never going to happen, half the time it's a struggle to get people to understand why I need to clip a mic to their shirt or get them to carry the pack in their pocket, let alone to get them to tape something to their chest/under their clothing. I've tried to explain it about a million times, but typically the cost of getting it there is losing the comfort/space/time you need your subject to have to tell the story. In a situation where you'll be working with someone over an extended period of time, what you're saying makes total sense and is completely right, but when you're meeting someone for the first time about thirty second before and interview where you're lucky if you've got five minutes of your time and patience, it just doesn't happen.
Yeah right , and on corporate shoots , you try asking the boss of some bank , to unbutton their shirt and you're going to stick this thing on their skin , ain't ever going to happen . The skin thing can work on some doc,s and shooting with the bros , but corp work , thats a no .
I agree 100%. I've done ballet interview you're not putting a lav on female dancer wearing skin tight leotard. I've done audience reactions in the lobby again you're not going under the shirt. Education docs with kids, etc. more often than not it isn't feasible. It's still good to know how when you do need to hide it. I do think it's good to invest in a small capsule mic, they can be hide easier under cloth and when they're on the outside they're not distracting.
Yeah, true. Sometimes I just throw a mic wherever I can clip it just before they start talking and that's the only chance I'll get. Then It's always "good enough" cenario. But also I'm trying to get out of this comfort zone when I have time, and make an extra effort to have better sound, so great tips, thanks!
🎤 I must say, normally when an average content creator puts up a video about audio my inner nerd feels violated but this video is perfect! You are also not the average content creator of course. I studied Sound Design at filmschool more then 10 years ago (yes still paying that off and yes I am learning how to tell a story now in AOD) and been a sound recordist on set for as long and these tips are perfect for people that "have to deal" with audio. Very well done sir!
Dude I love Goldeneye!! The soundtrack SLAPPS!!!! Do people still say that? I don't talk like that, I just wanted to try it out.....ummm.......I got to go.
While I agree in much of what you are saying I think you missed the first step and that is listening to the talent. If someone is new to audio, don't be afraid to use a scope (AcoustiTools is a great and easy to use app). Everyone has a different voice. The voice characteristics can make a difference in the placement of the mic, whether it be in a lav, shotgun, headset or broadway placement. For those with accentuated upper tonal curves, it does make sense to use the chest. But, with those that are really deep voices that might not have good clarity or enunciation, the placement may need to be adjusted. It sounds like a simple step that might just be assumed, but it can make all the difference, as it has the greatest impact on the overall sound quality, regardless of mic type or brand. 🎤
Been doing videos of many years and had no idea this was the proper way to do lav mics. Quick question, could I replace the mic itself, but still use my Rode Wireless Go II as the Tx/Rx?
Finally someone who puts the LAV in the right spot. Just below the bump on the sternum. It's my go-to trick for good audio when filming. It's also why I hate subjects in t-shirts with a passion and have bought vampire tabs for my lavs.
Brooooo, I just tested the Countryman B3 lav mic in the chest position like you said. What a game changer - it makes a huge difference to the tone of my voice compared with the collar position. Thank you!
I dont care about seeing a lav mic. I never have news trained. Unless its narrative im just clipping it. If its nasally Ill just add some bass in. I almost never use wireless either, too much of a hassle for a interview. If im following someone then I will but thats it. You're doing it a near perfect way. But its just not worth it when you can just clip a mic on and be done.
Don't cheap out on your mic! Few years ago I decided to get the Sennheiser MKH50 P48 mic. Best. Move. Ever. No more room sound, no more hissing or humming noise, just pure high quality audio 🎤
my issue is that i buy all these 32bit float recording systems, but the real issue is that the actual LAV at the capsule distorts, so a lot of lavs cant handle high yelling etc, so when i try to recover the distorted vocal, its burned into the lav,
Super helpful, thanks Mark! This video came just in time for me to film the a-roll for my chef short film this Saturday. Can you do a tutorial on how to adjust all the audio levels in Premiere Pro? After I export my videos and upload to RUclips, the soundtrack is always way quieter than I intended while editing :/
I absolutely hate when people use clip on trash mics, not only is it distracting but, yes it sounds like trash lol I don’t use special stickies but I literally just use cloth athletic tape and tape it to the persons chest under their shirt, 99% of the time the people tape it themselves, sometimes they ask me to do it. The tape holds it in place but, the tape also keeps the shirt from scratching against the mic, and it helps protect against the wind, and it sounds so much better.
Always great to get reminded of audio basics!! I started using Reycotes last year and loving them. Also my Rode Wireless Pro mics got stolen yesterday so time to get something better😂😂😂
Sanken Cos11D with bubblebee mic concealers mounted to a subject's chest is ideal. The neck area is a dead zone. As primarily a wedding filmmaker, I do this mic technique EVERY TIME I mic someone.
Hey, don't buy those lavs. That's absurd. Get the Rode Wireless Pro 2s. They're 350 dollars, comes with a transmitter, and 2 lavs, everything you need. Unless you're doing professional work that will be playing in theaters, nobody cares. Just get the mic close and don't let it scratch clothes. I'm sick of people pushing film production level gear that is marginally better.
🎤 I agree with the placement and levels. Geat vid! Personally I feel like on RUclips we push up the volume too much in post. From -12dB it ends up being -2dB and that's LOUD 😂. Lately I've been keeping my dialogue around -10 and I'm loving it! But again, my older videos are TOO LOUD😅
I started aiming for the RUclips audio requirements -14 lufs with a -2 ceiling and I feel like the audio is at a great loudness now even for insta and facebook (I think theirs are the same or pretty close to -14 lufs)
As an audio engineer….. not… great video. I’ve watched tons of videos on laving up but I don’t think any have shown the difference between the mic close to the neck and in the chest area.
One minor bone to pick with you. I have the Sony wireless lavs and the mics aren't that bad. Maybe when mounted under a shirt they might not have the highs of a COS-11d but they're not $500. Btw, equally important is the location, take an expensive mic and situate yourself in front computer desk, hard wood floors and untreated walls, that expensive mic won't sound too good. And yes this topic brings out the over opinionated audiophiles 😅
Great video and examples! But why a shotgun (indoors)? A cardoid will not get reflections from the back and you can get it a bit closer to the person, because there is no (long!) interference tube. Am I missing something? I use an Austrian Audio CC8 single or as a pair for almost everything (voice, guitar, singing, ambient, stereo recording ...) and am very happy with it. Does also not cost an arm and a leg.
In a pinch- I’ve had to always prioritize good audio over good imagery, even though it’s not ideal. But hey, if our voice sounds buttery enough to speak to your soul, I think that’s a start. 😂
great video, and also great comment about Goldeneye! Could you do some more audio tips for youtubers and try to get more of them to watch/listen to your videos please! Some of the audio I’m hearing on otherwise great YT videos is really horrible.
Honestly, as a sound guy and boom operator, I tend to aim the boom at the talent’s forehead. There are literally two schools of thought on this, and both can sound good, but I prefer aiming at the forehead because I find it provides a more balanced sound. As for the 416, please get a 50 (or any other good hypercardioid) for interiors-shotguns don’t work well with reverberating ambience.
I don’t have that money for 2 lab mics. Challenge for you: Can you get the Rode Lav Go hidden without scratching noises from clothes. I haven’t managed yet, is it just me? 😊 I have tried those DIY tape and also Rode Invisilav3.
I love every single advice you give on filming, but this time I have to say that you did say some crazy things about audio 😂. Moving a mic from the chest to the neck doesn't change the pitch, and pointing the mic to the chest doesn't sound better than pointing directly to the mouth. If that was the case we would point mics to the chest for singers too. Pointing a mic to the mouth is the best option if you know how to process audio. I hope i dont come off as arrogant or anything like that. I am a musician and i know a little bit about audio and sound design so i wanted to share my opinion
Would love to hear 1. The conversation you have when micing someone. It feels easier to just clip something to their neck and move on rather than wrestle under someone’s shirt, especially because of chest hair 2. Capturing audio on shotgun in the field. Thanks!!!
Just be confident and straight forward. “i’m going to put this mic right in the v of your shirt, tuck this cable in for me and pull it out at your hip. Now i’m going to pull your shirt out and tape it right here. ok great now turn your head and move a bit. Is is comfortable? Great!”
Do these stickies that you are showing work with men with chest hair? This has to be over 80% if the men we will be interviewing and asking my talent/subject to go through such discomfort at the end of an interview for me to get better audio isn't feasible to me but would love to hear your experience on this? I have ALWAYS opted instead to stick the mic to the shirt and not on the skin - as much like some of the comments mentioned below, many of the subjects I have interviewed are just doing a favor, only met 30 seconds before doing the interview and it's my job to make the interview as seamless, comfortable and especially painless as possible. But maybe I am missing a trick here and I have been over thinking it.
what do you think about the rode wireless go 2's? I bought them like a year ago as my 1st ever lav mics so I can't compare it to anything else as they are the only lavs I ever used. but in post I can get it to sound decent. but really wish I can try the ones you suggested. maybe ill invest soon
Great tips! Thanks for posting. Don't listen to the nerds. The peanut gallery on RUclips is made up of angry losers that can't make it in the real world of video production. They are jealous because you are successful.
great video. goal is to start booming shotguns more on interviews instead of defaulting to lav all the time. couldn't agree more about people putting the full rode packs on the shirt no lav, absolutely insane
Saw the Sanken in the thumbnail and knew some good knowledge was gonna be dropoed. People. Sell your BS rode and DJI toys and buy a real mic. Buy a sanken. Even a countryman. But seriously. Once you use a sanken mic through a lectrosonics pack, you'll realise that until that day you've just been pissing around with kiddies tinker toys.
Hey! This is super useful! But could you do a video on how to set the levels and frequencies etc.. and how to monitor sound whilst self shooting? And speaking of, could you do a video on self-shooting all together? I struggle to get great sound and great cinematography whilst thinking about how to build a scene when I'm self shooting. Would be amazing to hear how you do it! Thankssss I love your channel!!!!
No they're really not that bad. Don't believe everything you hear on RUclips. Just because someone has 300k subscribers doesn't mean they know everything.
googluck placing a mic inside a strange lady's bra...even as a man i would be skeptical about that inside chest placement...everyone is taught this stuff at film school but the fact is you meet and interview strangers everyday...it will never work on interview sets
Such a great topic! I personally prefer the sound of either a boom or headset mic. Not too crazy about the boomi chest sound of a lav, but no getting around it. For lavs, precut moleskin is my old reliable. One trick to make it comfortable is have the person who the talent is with put it on for them. Very easy to point to the spot on the chest and say angle it toward the mouth. They're always happy to help and everyone's comfortable 😁
I've been doing everything you did, except for 4:58 - what is the name of that little anti-rustle thing? I already own and use the rycote stickies all the time but I have had some shirt issues, so I'd love to try that out to make sure I don't get any future shirt rustle.
Can people start posting how to properly EQ lavs please? Placement first, sure, but they always sound so mehhhhh out the gate 😭😭🎤
That’s what I need! Someone helps us haha
Yes to this
Agree
Most lavs are quite flat so do a wide ice cream Scoop 500hz by 3-6 db depending on how much bass is coming from your subject, then do a wide ice cream scoop 1k-1800k again depending on how much bass is coming from your subject, then boost your high end 18k-20k 1-3 db, but use a de-esser to reduce shrill high end and unwanted sibilance. Then boost 100hz by 1-3 db but cut anything under 50hz cause that will be just rumble. Hope the helps!
@@davidsklubal I want ice cream now
As someone who went to film school and learned how to properly lav people some 20 years ago but who works at a news station and has to mic people twenty times a day I can't tell you how much I both love and hate this. Because yes, you're right this is exactly the right way to do thing, but in practice it's almost never going to happen, half the time it's a struggle to get people to understand why I need to clip a mic to their shirt or get them to carry the pack in their pocket, let alone to get them to tape something to their chest/under their clothing. I've tried to explain it about a million times, but typically the cost of getting it there is losing the comfort/space/time you need your subject to have to tell the story. In a situation where you'll be working with someone over an extended period of time, what you're saying makes total sense and is completely right, but when you're meeting someone for the first time about thirty second before and interview where you're lucky if you've got five minutes of your time and patience, it just doesn't happen.
Yeah right , and on corporate shoots , you try asking the boss of some bank , to unbutton their shirt and you're going to stick this thing on their skin , ain't ever going to happen . The skin thing can work on some doc,s and shooting with the bros , but corp work , thats a no .
If you are doing news why would you hide a mic?
I agree 100%. I've done ballet interview you're not putting a lav on female dancer wearing skin tight leotard. I've done audience reactions in the lobby again you're not going under the shirt. Education docs with kids, etc. more often than not it isn't feasible. It's still good to know how when you do need to hide it. I do think it's good to invest in a small capsule mic, they can be hide easier under cloth and when they're on the outside they're not distracting.
Yeah, true. Sometimes I just throw a mic wherever I can clip it just before they start talking and that's the only chance I'll get. Then It's always "good enough" cenario.
But also I'm trying to get out of this comfort zone when I have time, and make an extra effort to have better sound, so great tips, thanks!
Absoluetly correct. Imagine telling a well-dressed female guest if she can allow you clip lav on her chest, absolutely inappropriate and "pervy"
🎤 I must say, normally when an average content creator puts up a video about audio my inner nerd feels violated but this video is perfect! You are also not the average content creator of course. I studied Sound Design at filmschool more then 10 years ago (yes still paying that off and yes I am learning how to tell a story now in AOD) and been a sound recordist on set for as long and these tips are perfect for people that "have to deal" with audio. Very well done sir!
Dude I love Goldeneye!! The soundtrack SLAPPS!!!! Do people still say that? I don't talk like that, I just wanted to try it out.....ummm.......I got to go.
While I agree in much of what you are saying I think you missed the first step and that is listening to the talent. If someone is new to audio, don't be afraid to use a scope (AcoustiTools is a great and easy to use app). Everyone has a different voice. The voice characteristics can make a difference in the placement of the mic, whether it be in a lav, shotgun, headset or broadway placement. For those with accentuated upper tonal curves, it does make sense to use the chest. But, with those that are really deep voices that might not have good clarity or enunciation, the placement may need to be adjusted. It sounds like a simple step that might just be assumed, but it can make all the difference, as it has the greatest impact on the overall sound quality, regardless of mic type or brand. 🎤
Dang I’m in the 666 like . Someone fix this !!! Or Mark will never make a video again !
Been doing videos of many years and had no idea this was the proper way to do lav mics. Quick question, could I replace the mic itself, but still use my Rode Wireless Go II as the Tx/Rx?
Finally someone who puts the LAV in the right spot. Just below the bump on the sternum. It's my go-to trick for good audio when filming.
It's also why I hate subjects in t-shirts with a passion and have bought vampire tabs for my lavs.
Brooooo, I just tested the Countryman B3 lav mic in the chest position like you said. What a game changer - it makes a huge difference to the tone of my voice compared with the collar position. Thank you!
🎤
Well done! What level should you put on camera?
-12
I dont care about seeing a lav mic. I never have news trained. Unless its narrative im just clipping it. If its nasally Ill just add some bass in. I almost never use wireless either, too much of a hassle for a interview. If im following someone then I will but thats it. You're doing it a near perfect way. But its just not worth it when you can just clip a mic on and be done.
Don't cheap out on your mic! Few years ago I decided to get the Sennheiser MKH50 P48 mic. Best. Move. Ever. No more room sound, no more hissing or humming noise, just pure high quality audio 🎤
💯
🎤great tips!
my issue is that i buy all these 32bit float recording systems, but the real issue is that the actual LAV at the capsule distorts, so a lot of lavs cant handle high yelling etc, so when i try to recover the distorted vocal, its burned into the lav,
Super helpful, thanks Mark! This video came just in time for me to film the a-roll for my chef short film this Saturday. Can you do a tutorial on how to adjust all the audio levels in Premiere Pro? After I export my videos and upload to RUclips, the soundtrack is always way quieter than I intended while editing :/
Wondering will using such a mic make sense on the Sony / DJI / Rode wireless transmitters?
I'm very curious :)
Yes! It will work great. You just have to make sure to buy the proper connector on the Cos-11 for correct mic pack.
Short and to the point!!! I feel like I’ll watch this over and over
No the best way is to hold a Røde Mic Go in your hand even though it's designed to be clipped on your shirt.
I absolutely hate when people use clip on trash mics, not only is it distracting but, yes it sounds like trash lol
I don’t use special stickies but I literally just use cloth athletic tape and tape it to the persons chest under their shirt, 99% of the time the people tape it themselves, sometimes they ask me to do it. The tape holds it in place but, the tape also keeps the shirt from scratching against the mic, and it helps protect against the wind, and it sounds so much better.
Always great to get reminded of audio basics!! I started using Reycotes last year and loving them.
Also my Rode Wireless Pro mics got stolen yesterday so time to get something better😂😂😂
Sanken Cos11D with bubblebee mic concealers mounted to a subject's chest is ideal. The neck area is a dead zone. As primarily a wedding filmmaker, I do this mic technique EVERY TIME I mic someone.
Hey, don't buy those lavs. That's absurd. Get the Rode Wireless Pro 2s. They're 350 dollars, comes with a transmitter, and 2 lavs, everything you need. Unless you're doing professional work that will be playing in theaters, nobody cares. Just get the mic close and don't let it scratch clothes. I'm sick of people pushing film production level gear that is marginally better.
Nope.
@@markbone Look everyone, the best argument against what I’m pointing out.
Congrats on 300k subs Mark! Well deserved. Thank you for all the helpful information throughout the years.
“Audio brings out……nerds.” 😂 had me dying
Just bought 4 Cos 11’s for a presidential campaign I’m working on. Also a huge fan of the DPA 4060’s now.
Nice! I see there are many versions of this mic on B&H. Which one do you recommend? Its just diff connectors correct?
Wow happy the first to comment ❤
🎤 I agree with the placement and levels. Geat vid! Personally I feel like on RUclips we push up the volume too much in post. From -12dB it ends up being -2dB and that's LOUD 😂. Lately I've been keeping my dialogue around -10 and I'm loving it! But again, my older videos are TOO LOUD😅
I started aiming for the RUclips audio requirements -14 lufs with a -2 ceiling and I feel like the audio is at a great loudness now even for insta and facebook (I think theirs are the same or pretty close to -14 lufs)
Yeah, that's a great spot to be in. Sometimes I click on my old YT vids and almost get a heart attack when my dialogue is at 0dB 😅
Def learned a few things thanks!
As an audio engineer….. not… great video. I’ve watched tons of videos on laving up but I don’t think any have shown the difference between the mic close to the neck and in the chest area.
One minor bone to pick with you. I have the Sony wireless lavs and the mics aren't that bad. Maybe when mounted under a shirt they might not have the highs of a COS-11d but they're not $500. Btw, equally important is the location, take an expensive mic and situate yourself in front computer desk, hard wood floors and untreated walls, that expensive mic won't sound too good.
And yes this topic brings out the over opinionated audiophiles 😅
Great video and examples! But why a shotgun (indoors)? A cardoid will not get reflections from the back and you can get it a bit closer to the person, because there is no (long!) interference tube. Am I missing something? I use an Austrian Audio CC8 single or as a pair for almost everything (voice, guitar, singing, ambient, stereo recording ...) and am very happy with it. Does also not cost an arm and a leg.
My question is, what lens do you use in your youtube vids cause it looks gorgeous. 24 or 35?
🎤 Live in the east end and looking forward to checking Trew Audio out! Thanks, Mark!
In a pinch- I’ve had to always prioritize good audio over good imagery, even though it’s not ideal. But hey, if our voice sounds buttery enough to speak to your soul, I think that’s a start. 😂
All great info, nice one Mark. Can't have too many reminders to pay attention to audio. Also, the Goldeneye menu song will never get old! 🎵🎤
On the lapel works for women. Unless they are comfortable having the mike taped to their chest.
great video, and also great comment about Goldeneye! Could you do some more audio tips for youtubers and try to get more of them to watch/listen to your videos please! Some of the audio I’m hearing on otherwise great YT videos is really horrible.
Honestly, as a sound guy and boom operator, I tend to aim the boom at the talent’s forehead. There are literally two schools of thought on this, and both can sound good, but I prefer aiming at the forehead because I find it provides a more balanced sound. As for the 416, please get a 50 (or any other good hypercardioid) for interiors-shotguns don’t work well with reverberating ambience.
hey mark can you suggest me some good books to learn cinematography ? i have already read 5 c's of cinematography by joseph v. mascelli .
I subscribed coz you thrahsed RODE Mics lol
Maaaaaan, most helpful reminder I've had on lav placement, been too fooled by the convenience of the internal DJI mics
I don’t have that money for 2 lab mics.
Challenge for you:
Can you get the Rode Lav Go hidden without scratching noises from clothes. I haven’t managed yet, is it just me? 😊
I have tried those DIY tape and also Rode Invisilav3.
I love every single advice you give on filming, but this time I have to say that you did say some crazy things about audio 😂. Moving a mic from the chest to the neck doesn't change the pitch, and pointing the mic to the chest doesn't sound better than pointing directly to the mouth. If that was the case we would point mics to the chest for singers too.
Pointing a mic to the mouth is the best option if you know how to process audio.
I hope i dont come off as arrogant or anything like that. I am a musician and i know a little bit about audio and sound design so i wanted to share my opinion
Would love to hear 1. The conversation you have when micing someone. It feels easier to just clip something to their neck and move on rather than wrestle under someone’s shirt, especially because of chest hair
2. Capturing audio on shotgun in the field.
Thanks!!!
Just be confident and straight forward. “i’m going to put this mic right in the v of your shirt, tuck this cable in for me and pull it out at your hip. Now i’m going to pull your shirt out and tape it right here. ok great now turn your head and move a bit. Is is comfortable? Great!”
Do these stickies that you are showing work with men with chest hair? This has to be over 80% if the men we will be interviewing and asking my talent/subject to go through such discomfort at the end of an interview for me to get better audio isn't feasible to me but would love to hear your experience on this? I have ALWAYS opted instead to stick the mic to the shirt and not on the skin - as much like some of the comments mentioned below, many of the subjects I have interviewed are just doing a favor, only met 30 seconds before doing the interview and it's my job to make the interview as seamless, comfortable and especially painless as possible. But maybe I am missing a trick here and I have been over thinking it.
what do you think about the rode wireless go 2's? I bought them like a year ago as my 1st ever lav mics so I can't compare it to anything else as they are the only lavs I ever used. but in post I can get it to sound decent. but really wish I can try the ones you suggested. maybe ill invest soon
🎤🎙️great video! We out here!
Great tips! Thanks for posting. Don't listen to the nerds. The peanut gallery on RUclips is made up of angry losers that can't make it in the real world of video production. They are jealous because you are successful.
🎤 This is really well explained! Thank you so much!!
Bro which mic you suggest for begginer documentary mic?
Excellent advice, thank you!
This was great. Needed the hiding lavs help.
🎤🎙️🎤
🎙
🎤
🎙
🎤
🎤
🎤
🎙️
🎤
Microphone emoji 😮
😂
great video. goal is to start booming shotguns more on interviews instead of defaulting to lav all the time. couldn't agree more about people putting the full rode packs on the shirt no lav, absolutely insane
This is gold, I've always thought that the way people use the wireless mic packs was weird. This confirms.
Thanks 🎤🎙️💪🏾
some awesome haze in those dirtbike setups! whats your go to hazer?
Rename the video : Mic tips for billionaires.
🎙️
🎙️
Microphone Emoji (I couldn't find it)
Talk about nostalgia 🎵🎶 007 👏👏
6:36
Super informative as always Mark 🎤
I thought MB in the intro stands for Mic Better 😉
G'day Mark did you get my email fron the land down under?
Subscribed today 🤜🏾
Saw the Sanken in the thumbnail and knew some good knowledge was gonna be dropoed. People. Sell your BS rode and DJI toys and buy a real mic. Buy a sanken. Even a countryman. But seriously. Once you use a sanken mic through a lectrosonics pack, you'll realise that until that day you've just been pissing around with kiddies tinker toys.
100%
You get it.
Thank you.
Hey! This is super useful! But could you do a video on how to set the levels and frequencies etc.. and how to monitor sound whilst self shooting? And speaking of, could you do a video on self-shooting all together? I struggle to get great sound and great cinematography whilst thinking about how to build a scene when I'm self shooting. Would be amazing to hear how you do it! Thankssss I love your channel!!!!
Curtis Judd has some really good audio info on his channel.
Thanks a lot mate
Most welcome e
Are the rode wireless go mics really that bad? I’ve had them for a couple years now and I think they sound pretty good
not bad, but cos-11's are definitely a big step up in quality.
No they're really not that bad. Don't believe everything you hear on RUclips. Just because someone has 300k subscribers doesn't mean they know everything.
does anybody know where to find these lav mics in Europe? They seem to be available only in US.
Does B&H ship internationally?
🎤 🎙️ thanks Mark!
googluck placing a mic inside a strange lady's bra...even as a man i would be skeptical about that inside chest placement...everyone is taught this stuff at film school but the fact is you meet and interview strangers everyday...it will never work on interview sets
You just ask them to attach it themselves
Super helpful, thanks. 🎥🎤
🎤 because Mark said so.
Such a great topic! I personally prefer the sound of either a boom or headset mic. Not too crazy about the boomi chest sound of a lav, but no getting around it.
For lavs, precut moleskin is my old reliable. One trick to make it comfortable is have the person who the talent is with put it on for them. Very easy to point to the spot on the chest and say angle it toward the mouth. They're always happy to help and everyone's comfortable 😁
Great tips! 🎤
Thank you
What if ur wearing a coat? Wont it all be muffled in there. Also what if it is a woman wont it be muffled by their bust?
No coats. I’m anti coats. Coats are oppressive.
God bless you for these hints
THANK YOU
🎤 Thanks for the info
I just bought rode go 2 today... Don't know if I should hate this video or accept my fault 😢
Thanks, Mark!🎤🎬
🎤. Thank you
Спасибо! Класс)
🎤🎙 (NERDS!) - So good!
I've been doing everything you did, except for 4:58 - what is the name of that little anti-rustle thing? I already own and use the rycote stickies all the time but I have had some shirt issues, so I'd love to try that out to make sure I don't get any future shirt rustle.
🎙🎙🎙🎙🎙🎙
ty
great vidéo... again 🎤