From Straight to Spiral: Design a Curved Spring in Inventor
HTML-код
- Опубликовано: 21 авг 2024
- Uncoil your creativity!
In this video, we'll learn how to model a curved spring in Autodesk Inventor. By following along, you'll learn the basics of modeling in Autodesk Inventor and create a realistic curved spring that you can use in your designs.
If you're a designer or engineer and want to learn how to model curved surfaces in Autodesk Inventor, then this video is for you! By the end of this video, you'll have learned how to create a realistic curved spring in Autodesk Inventor, and you'll be able to use it in your designs!
I use two surface sweeps to create a three-dimensional path for the solid sweep of the curved spring. I modeled this in Autodesk Inventor
3D-model here:
grabcad.com/li...
grabcad.com/tu...
Best Video about springs I've seen
Thx
Thx man, you really helped me out, genius!
You are very welcome, thx for the compliment.
Hello. Great video. Works, except unable to use visibility to turn off pipe
All good now. Changed pipe to surface
Great! I'm happy it worked out.
Many thanx
Any time
Nice
thanks
Is it possible to do this without creating a discontinuity where the centerline changes from straight to curved?
It is one single path.