Hi, you did a great job! With my friend I'm planning one almost the same as yours, but mine will be 10 KW with larger magnets, the current can be selected 110/220v with the different sockets. The whole frame will be made of hard aluminum, the starting system is recoil like yours. I will use it privately, I will make prototypes to sell privately to all those who want to save money, for a house in the mountains, by the sea, etc. Good job everyone
Weird how you’re like “here’s all the info you need to build this” alongside “we can’t tell you the exact details”. What’s your aim? If this is legit it would prove all the conspiracies right and mean you’re in grave danger. The only way to save yourself is by making everything freely available.
Alloy composition (With the help of AI): Silver: 77% Aluminum: 15% Copper: 5% Manganese: 3% Key adjustments: Slightly lower silver content to reduce electrical conductivity and minimize eddy current losses from induced swirling currents in the rotor. Higher copper content to maintain conductivity, but manganese added to counteract copper's tendency to increase eddy currents. Manganese additions also increase resistivity, which helps control eddy currents. Manganese provides good hardness and tensile strength as well, substituting for zinc. Lower conductivity alloy helps reduce magnetic brake effects from induced rotor currents opposing the rotating magnetic field. Other refinements could include: Trace boron or silicon for further resistivity. Grain refinement and heat treatment to break up the crystalline structure. Semi-conductive coating on the rotor surface to impede eddy current formation. Can anyone comment?
@McFlysGaming p0:In the context of a perpetual electricity generator, only knowing that the rotor prototype holding the magnets is made of an alloy composed of silver and aluminium for the rotor. a very important clue is that the alloy is composed mainly of silver and aluminium among other materials. The total volume of the rotor is 1073.3 cubic centimetres and it weighs 7.6 kilogrammes. also was applied special treatments to this alloy. Suggest what this alloy is made of and provide all the proportions for each compound. p1:Suggest a composition for this rotor to work in an optimum way in the context of an electrical generator. p2: Take into account eddy current and magnetic break, things we want to avoid for the alloy
I got this from AI If cost is not an issue, and the silver content needs to be more than 75%, the composition of the alloy for the perpetual electricity generator rotor could be adjusted as follows: - Silver: 85%-95% - Aluminum: 2.5%-10% - Copper: 1%-4% - Zinc: 0.5%-2% - Nickel: 0.5%-2% - Magnesium: 0%-1% - Titanium: 0%-1% - Beryllium: 0%-0.5% - Silicon: 0%-0.3% This composition would have an even higher silver content, which would provide even greater electrical conductivity than the previous composition. However, it's important to note that increasing the silver content beyond a certain point can also reduce the mechanical strength of the alloy, so this should also be taken into consideration. Again, the exact composition will depend on the specific properties and performance required for the perpetual electricity generator rotor, but this provides a general idea of how the composition can be adjusted to increase the silver content.
@@happy2be3one Tin is a good idea but it’s mostly silver and aluminum. According to Artificial Intelligence, it cant have to much aluminum because it start to lose back emf impulse.
You guys did a great job!! It would be great if you could take an old car body, like a VW Bug, put an electric drive motor in it and the Liberty Motor and drive it around, that would be too cool. I reall wish those of us who do not have a machine shop could purchase the parts and put this together for our own family home use.
pour arriver en procedure de coulage de fonderie avec les composants annonces le process doit etre realise sous HAUTE PRESSION,car les temperatures de fusion sont toutes differentes ,le degazage et la restructuration moleculaire egalement.tout ca pour dire que cette "recette miracle"est une grosse arnaque car pour le commun des mortels ,c'est inaccessible donc inverifiable .quand on regarde attentivement l'aspect du rotor ,il est parsemé de bullage .le moteur utilise ne correspond pas du tout aux specificites annoncees (RPM dimensions d'arbre ,nombre de poles et sur le boitier ouvert en demonstration le positionnement des barettes de connexion donc apres avoir decortique toutes ces infos la realite est que C'EST UNE GROSSE ARNAQUE. le depot de brevet n'existe pas non plus (verifie aupres de L'OMPI ainsi que tous les organismes internationaux la pseudo conference de presse a ete piocheé sur une apk TV DONC ARRETTEZ DE PRENDRE LES GENS POUR DES IDIOTS .la diffusion de FAKES tout ca pour escroquer les personnes credules .bientot une petite enquette feras stopper cette aberation et il faudras rembourser tous ceux qui se sont abonne pour avoir LES PLANS SECRETS DE FABRICATION
@@franckverdu7140 Pouvez-vous croire le nombre de personnes qui penser que c'est réel ? J'aimerais vendre à ces gens un paradis tropical dans la toundra arctique ! Je pense qu'ils ont dit que l'alliage était un mélange d'aluminium et d'argent. Puis il a poursuivi en disant qu'il n'y avait pas de courants de Foucault. C'est alors que j'ai commencé à éclater de rire. Comment diable 2 matériaux extrêmement conducteurs comme l'aluminium et l'argent peuvent-ils ne pas avoir de courants de Foucault !? Ferriday et Maxwell devraient ressusciter d'entre les morts et se tenir dans un coin de la pièce et rôtir ces idiots jusqu'à ce que leurs parents les renient pour leur stupidité ! Haha!
How do you expect anyone to believe any of this really works if we can't get full details and disclosure. And why is this motor not front page news .we should be driving cars with this type of motors.we should all be powering out lives n homes with this device. You guys would be multitrilionaires
Wow very Useful this Project I like it, I will made it, many Video i watch in YT only this Vedio very Convinceng thank you for your effort and sharing your Project not for your content you Vlog but very useful to you Subcriber..God Bless You mor Power.
amazing guys, i cant believe you continue to update, this is the real deal, hope someday you decide to release all information for the public to replicate those devices and become independant from oil companies, this is the way! thank you
@@ScottFogarty-iv9wt i believe we need to know the exact specs of the rotor alloy to be able to do it as i understand it has strong relation to the distance and type of transformers being used
@@MrBademy Hello Valentin, I totally agree with you. It would be wonderful if ALL of the work that they have done could just be handed over to us. It seems to me that is has been, with just a little more work left to be done. I read that someone was "hoping" to be able to have this technology "some day", in the "future". The action of hoping is waiting. We all have been hoping and waiting for something like this to come along and now it has. I think they have explained their position pretty well. I am so thankful that they have given us what they have. Now what are we going to do with it?
@@ScottFogarty-iv9wt Yes i completely agree with you, but I have one small conflict in my head, they want to change the world they want to solve the energy crisis and government control, and else on the other hand this well-kept secret, and cannot be sold commercially and they will never do, because of oil companies will never release that secret to us, so the cycle is closed and nothing happens. So this cannot be sold ever, the only way is by replicating, why not release all to us in this case with the goal to change the tyranny and corruption of the government systems. And again they do release already enough details and am glad that they are doing this and really grateful. My question is now can anyone replicate it and have you succeeded so , that would be the proof
@@MrBademy from what I understand it is a silver/aluminum mix. You can find alloy makers that make it with 5% and 10% silver mix. I would guess it is one of those two!
Thank you for your generous good deeds. sharing ideas. I love your ideas of free energy and further helping people in hard times. I hope RUclips doesn't ban you.
the great thing about science is that it's new understanding and discovery drives its growth,or should because the laws of science are never complete or fixed yet, big industry hides discovery for profit. establishment science peers barely recognise citizen science which is a disservice to mankind because it is where all invention outside the 'laws of science' is to be found,outside of the box..sadly much invention is literally murdered, I have direct experience of this..proof if you will..
not really, the second law of thermodynamic states the sum entropy of a closed system can NEVER decreases, it was falsified and proven to be incorrect when heat pumps shows COP > 1 for energy transfer which is reduction entropy. Thermodynamics has its uses but lord Kelvin was just a man and just because he was a lord doesnt make his theories laws.
I dont think it does. What they have done is minimized or eliminated the eddy currents. I saw a video years ago with some people doing something very similar. Get rid of the eddy currents then the magnets will pull it around with very little friction. He just made it way more efficient.
@@aywitb911 Do you really think the conservation law of energy is only valid if eddy currents are present? By minimizing eddy currents you can increase the efficiency of a working device but minimizing eddy currents doesn't make a non-working device work.
@@heinzpg Uh have you completely forgotten about the magnetism. That is whats used to spin the device. Its the field coming from the magnets, once they die out however long that is then it wont work anymore. Its not really over unity its just creating energy from the magnetic fields. They go away and so does the energy.
Ive seen many of your vids, on the earlier ones you said you would give last details to diy our own build. Im sure you understand everyone skepticism. If it is possible you should open source this so the technology is not lost when big money comes, buys, hides it from the people.. i know you have talked about that. Others have to be able to replicate.
It’s easy asf my uncle can replicate it he’s also invented power beat batteries and many other devices that work your just an amature that knows nothing
The only one true way to do this, is to make a video from start to finish with everything you need. Release it to the world, and watch it change this world overnight!
patent konusunda iyibi açıklama yaptın hem kendi adına hem ülken adına hemde dünya adına net ve pozitif açıklamalarda bulundun heerkes senin gibi olmaya bilir bunun için teşekkür ediyorum hem dünyanın hemde gelecek nesillerin senin gibi insanlara ihtiyacı var başarılar dilerim TÜRKİYE DEN sevgiler
Thank you for doing this great service, this engine will help me make a 2X version for my land and sea house that I will build some day. This would make a drone fly forever BTW!
They don't want to share fir the All the Good for Humanity... No reason to support this channel... Unfortunately, the Humanity Need to pass Great Reset with a distraction as a filter...
You guys are the greatest! I’ve always knew this was possible , and you guys have done it ! It people like you guys that will change this world ! God bless and stay safe , don’t let Uncle Sam sweep this under the rug …
I love seeing that people are already building this. I'm working on another invention with electromagnets to get the money to build one of these myself. Your design seems even simpler than mine. I do have questions though. Are all the magnets running together, or do they alternate? How do you keep them cool? How do you regulate the voltage sent to the magnets? Could I buy one of these for myself? I could actually skip my own build, and move to the next invention without having to go through the whole distribution process. This is a Tesla idea. It was meant to move humanity to the next level of freedom. That's why they killed him, and buried his ideas. I've had this idea in my head for quite some time now. I've told many people about it, and saw their eyes light up when they thought I just gave them a billion dollar idea. I tried to explain to them that they can not patent this idea. If you do, they'll come after you. They don't seem to get it. It's such a simple design, and once the technology is out there, anyone can build it. I love this.
Hello, I see that you are not answering a single question that I asked you. Where is the phase shift on the stator part where the coils are placed. There are not any! because to create a phase movement it is necessary to have a phase shift as for the part of the single-phase motor because otherwise the voltages cancel each other and the system cannot continue to turn. So how do you do? I am really waiting for a response from you. THANKS
I wish I could help develop 3.5 and beyond. I would rather use my intellect for this project than work a regular job. Blueprints are welcome 🙏🏾 but your craftsmanship and design are second to none. Can I have one? This is more than liberty it’s Freedom. Be safe and Godspeed!
Assuming the alloy is Silver/Aluminum only, the proportions are roughly 56.24/43.76 volumetric and 83.31/16.69 weight ratio Ag/Al. The other unknown components might alter the proportions of these two. The price of roughly 6.5 kilos of silver is around 5.2 k USD. Investing that much in the rotor would be quite a leap of faith...
Ini sangat bagus, terus lakukan uji coba untuk daya tahan dari partnya jika alatnya bekerja secara terus menerus tanpa henti, saya mau alat ini diproduksi masal, atau diciptakan lagi alat dengan skala yang lebih besar sehingga bisa dipakai sebagai pembangkit listrik yang akan berfungsi menerangi sebuah kota secara Gratis. Ini sangat bermanfaat sekali bagi manusia.
Am from India can u please help in knowing that the current generated by microwave coil is DC than how can you directly connect the same to AC motor fitted with capacitor and it's working please explain
Но не для нафтовеків, урядів, міліардерів, і тих хто керує, світом, думаєте, це вже не винайдено, це вже давно винайдено, і приховано, і вже давно, світ направлено, в другу сторону, всі вчені перекуплені, навіть тесла, томі це і не виплело, а потом він продовжував, і вбили, всі вчиня в інстетутах, школах, все щоб вивчити дітей людей як їм потрібно, інакше, би людям непотрібні би буле вони, і льди би не булиб рабами. Люди ця брехня вже 1000 років. В світі багато чого можливо, просто нас вивчили так що ми нічого не бачимо, з самого малку.😢
Melihat dari proses pembuatan generator dengan magnet permanen dan menghasilkan arus AC untuk menggerakkan motor, idenya sangat bagus, kalau sudah diproduksi masal , harganya pun tidak terlalu mahal . mantaaap
The first law of thermodynamics states that energy cannot be created or destroyed in an isolated system. It can only be transformed from one form to another or transferred between different parts of the system. In other words, the total amount of energy in a closed system remains constant.
Correct but who said this system is closed ... or we can't open it. There seems to be some weard ssht happening when large mass spins fast especially when coupled with electromagnet spectrum. We dont yet underestand how universe really works - keep an open mind, most groundbraking discoveris were treated with hate and ridicule but to day we are using those ridiculus things ☺
@@viljar1112 "Weird shit happening" sounds conspicously like "then something magic occurs". What does "large mas spinning when coupled with electromagnetic spectrum" even MEAN? But of course, the test for any theory is not what it SOUNDS like, but if it actually works. Has this theory been put to the test outside of the genius's lab?
In any system large enough to avoid quantum dynamics, that's quite correct. Smooth flow, as this is, simply can't do what he's claiming. IOW, for this system to actually work, I'd expect to see frost forming on the outside of the engine as it pulled energy from the surrounding heat. Anyone who had a discovery that produced far more power than the input doesn't NEED to impress any physicists or such, they just need to hit up their friends for investment and start up production in a factory in China for the parts, and put them together in the USA. I GUARANTEE you the Dept of Defense doesn't give two flying whoops about theory, they'd buy ten thousand such generators in a heartbeat, IF you could demonstrate they worked with a real load, and could indeed run a day or two without stopping. The US Navy alone would want thousands of them, they'd LOVE to replace their subs nuclear reactors with a "never surface again" power supply. If it's easy enough to build at home, get China or India to cast up the frame and parts, and start selling them. There'll be plenty of customers - IF it is shown to work. Sigh. This nonsense has been around for my entire life, and history says it goes back much further, and somehow, despite the obvious demand, NOBODY has sold one that could pass an independent test yet. And don't gimme the "oil companies" thing, DoD doesn't care two whits for big oil, and would LOVE to cut off that billions of dollars of yearly expense and put it into developing new weapons.
I think there is a catch with the distribution outlet when it was turned on. If it is not connected to the network, the indicator should not light up. And why did it light up for a sec? Although, perhaps, the capacitor was discharged on the neon lamp!
@@simplethings2410 You mean lamp on the button of the power outlet? If you watch the video slowly, you'll see it. I plan to make a copy of shown "liberty engine" to prove or disprove the idea. It looks like two coils would be enough to power the motor!
@@НЕЗНАЙКАТВIt is just the two coils facing each other that is connected in parallel lights the lamp..and the other two coils connected also in parallel powers the motor..There is no electrical connections between the two sets of parallel coils. They are two different circuits..Whatever happens to the coil set where the lamp is connected, does not affect the other that is driving the motor. You can obviously see that in the electrical diagram.
@@НЕЗНАЙКАТВ Watch the clip again and you will see that it is the light coming from the ceiling of the workshop reflects to the light button that is why it looks like that light it is enrgized prematurely. It is just a reflection of the light above.
Se agradece el haber compartido algo k las industrias de todos los países tratarán de apropiarse x lo tanto deben tener cuidado de sus personas X otro lado, es un modelo k permite ser autosuficiente de la energía de las grandes corporaciones k brindan este servicio y k este sistema los va a perjudicar Quienes se decidan a construir este Generador de Energía Libre, deberá mantenerlo en secreto y ayudar a quienes quieran este sistema xk muchas personas solo se dedican a mal informar sobre este tipo de inventos Gracias x apreciar el trabajo k realizan en este canal, estoy dispuesto a construirlo y ya reportare k paso con este proyecto, sin más, muchas gracias de nuevo
I am very happy to your invintion amigo because u are kind and very talented like Tesla to give more idea to the universe to give possible light at all around the world power with out any problem like to buy gasoline or any part of ur invintion almost zero maintenance brother you are good people I hope used this for small tiny house every day life used like anything like light,fan, electric iron or etc.bro bravos amigo iam very proud of it ur the One amigo!
I'm not an engineer or electrician or anything like that, but it seems to me like the only function of the rotor is to hold the magnets. Couldn't it be made by a block of acrylic plastic or even some laminated hardwood or plywood? No eddy currents in those, and the RPM isn't fast enough to rip the rotor apart. I also agree with others, there's no way anyone will survive trying to make money by an invention like this (if it actually works). The oil companies will bury both you and your machine until the last drop of oil has been squeezed out of the Earth. Only chance of survival is to make ALL information about this freely available online so that it will be copied and spread.
Yes and the thing is oil is not scarce, they just want that we think that it is scarce. It is created about 200 km deep in the ground and is naturally created by the earth because of the heat and pressure.
@@alenpasnikov Oh I thought it was just crushed Dinosaur bones and plants! [sarcasm] Peeps, they've lied about nearly everything. We need to recalibrate our minds and seek truths only.
Assuming that the alloy is made up of aluminum, silver, silicon, barium ferrite, and strontium ferrite, the likely proportions of the elements in the alloy are estimated to be: Aluminum: 47.5-50% Silver: 16.7-17.8% Silicon: 0.3-14% Barium ferrite: 32.9-38.4% Strontium ferrite: 0.9-1.5% there were other models that came up potentially including small percentages of Magnesium (for structural strength), and potentially even smaller amounts of Dysprosium, Terbium, and Praseodymium(to enhance magnetic properties). but not enough to warrant including for the basic breakdown. magnesium has properties that are emf shielding so i dont know if that would be good or bad in this context, but if you include magnesium to the list then the model im using allows for a proportion range of .5%-15% Note that this is not including the calculation required to subtract the weight of the neodymium magnets from the total weight before applying the proportion calculation. that would still need to be done to be more accurate. or you could just calculate the weight of the magnets based on the known weight of neodymium and the dimensions of the magnets and then just include the known % of the weight thats neodymium in the proportion calculation. both equations would tell you the % proportion of neodymium in the rotor.
it was allows a capability magnetic repulsion has always been free energy it just needed to be harnessed and worked into a motor. great job and all the very best.
You can even use engineering plastic (w/c is lighter) as your rotor for the magnets instead of aluminum-silver alloy. Just make sure to couple your rotor to another flywheel in the same shaft that weighs 7.6 kgs minimum (same as his). It is much better to have a slightly larger diameter fly wheel to have better rotational energy (moment of inertia). The fly wheel can be made of mild steel to make it cheaper. You can use this formula: Moment of Inertia = 1/2 x (mass in kgs) x (radius in meters)² - "take note of the squared". Take note also that the moment of inertia of yours should not be lesser than his to maintain an effective rotational energy at 1500 RPM. At that weight of the fly wheel, the speed of the system will not change significantly even if you remove the power to the motor for a couple of seconds or even you put bigger loads.
@@janengel1985 do you have any practical demonstration or video, i`d like to give a try i suppose some parts can be expensive so i dont want to waste money , thought i am a true believer and i already have 2 electric motors playing with the capacitors and diode bridges, but this looks much simpler than what i am doing
If this concept were truly functional, you could distribute the necessary components across various companies, avoiding any legal entanglements by merely selling these parts for various purposes. You could create a RUclips video showcasing where individuals can purchase each required component to assemble it. However, it's evident that if a setup as simple as connecting a squirrel cage motor to a coaxial flux motor could generate substantial energy, it would have been achieved long ago.
Je me demandais comme pour les autres brevets, ou était la porte de sortie pour rendre ça crédible, et arrive le coup de l'alliage mystique, inventé par Luc Skywalker et valider par l'empereur lui même... Bravo, ce mystère va nous emmener vers une autre vidéo encore plus succulente 👍
Это бред, я тебе такой же тест с тыквой вырабатывающей 100 квт сделаю. На этом видео минимум два способа как обмануть зрителей. Оба отпали бы при поднятии агрегата. Но нет он его не трогает
@@ВолодимирПироженко-э2ж Самый простой способ проверить эту систему на работоспособность и доказать, ЧТО ЭТО не ФЕЙК : !!!! Убрать всё лишнее: металлическую раму ! Лишние провода и блоки ! НЕ КРАСИТЬ НИЧЕГО !!! 1. Прикрутить двигатель к прозрачной _!_ -образной из плексигласа стойке. 2. Навесить на вал барабан с магнитами. 3. На вертикальную пластину плексигласа, где закреплён мотор, вокруг барабана прикрепить катушки с сердечниками. 4. Рядом с катушками разместить по 2-ной розетке на каждую катушку и подключить соответственно. 5. Ничего нигде не соединяя, включить мотор в сеть 220v через Ватт-метр. 6. Далее -- нагружаем катушки разными электро-потребителями так-же через Ватт-метры -- проверяем ВЫХОДНУЮ МОЩНОСТЬ генератора ! 7. И на финише, отключив все нагрузки, проверяем САМО - ЗАПИТКУ ... ; когда система наберёт обороты, -- быстро переставляем вилку мотора из сети 220v в любую из розеток генератора. ( Может придётся пробовать разные варианты: выбирать розетку, менять полярность вилки, соединять по-парно параллельно противоположные катушки через розетки двойным проводом с вилками на концах ! Что-бы не было на системе лишних "соплей" !!! ) Потом, работающий агрегат, перенести на стеклянный стол .... Иииии..... , если мотор не остановится -- ЗНАЧИТ -- -- ПОБЕДА ...!!! ЗНАЧИТ -- НЕ ФЕЙК !?
@ВикторЛапутько They don't want to share fir the All the Good for Humanity... No reason to support this channel... Unfortunately, the Humanity Need to pass Great Reset with a distraction as a filter...
Back in the 70s and 80s on the Jonny Carson show if anyone out there can remember there was a man that is the creator of this great invention he used magnetic energy to power a light bulb this is truly astonishing
Man, your good!!! And how about those magic wires!!! At 53 amps output that whole thing would be smoking and melting down even if those motor wires didn't melt like fuse links in just a few seconds...
This will never see the light of day unless it is shared open source with the public. The patent process has a history of supressing over 5000 amazing technologies like this one. The current energy industry will stop at nothing to prevent this from coming out. Why would they ever be ok with it? The world needs this so badly right now. People are suffering. We shouldn't have to be slaving away to have electricity anymore. We shouldn't have to pay to live on a planet we were born on. Everyone deserves a home and access to power. This needs to be released before it is taken away for good. Secrets make us weak and vulnerable to crimes against humanity. All anyone cares about is money. Be a hero and let it out of the cage before you lose the chance. That being said...thank you for showing us what you have. Hopefully we can rediscover the silver aluminum alloy process, and recreate it. Sounds really specific and hard to figure out. Thanks for the tease. I can't decide if I'm mad at you or not. Add another to the "almost got it" list...
This is my first time watching this and if this is legit and works I sincerely need to say thank you. We all need to work together and rid the evil aka govt from all nations. Electricity is everywhere constantly and there's no reason we all should have free energy.
Dear Inventor, I have few questions for you. 1. How you are maintaining constant cycle of 50 hz frequency. 2. Also how you are maintaining constant voltage of 110 or 230 ? 3. You said in video that you have created an alloy material to get the weight of 7.5 kilograms for the rotor. Can it be any other material with same weight 4. If the rotor weight is different and 7.5, what will happen?
Couple it to a heavy flywheel, run the system and afterwards, remove the power supply to the motor, you will see that the frequency and speed will remain the same for quite some time. The heavier the rotor to stop turning, the longer for it to be able to sustain the speed even you remove the power to the motor before it coasts down.
Actually the heavy rotor is just acting like gosolin engine flywheel which helps in making engine continue rotation to complete stocks cycle or continuing smooth cycle
Be honest can u make another content part about how to assemble/conecting the wire ecspecialy from transformers into the engine? If this really work and you not going for money or famous you should make separate content for every part so you can teach people as many as you can, but if you just making this content for click bait of views you did good and done very well in creativity, God Bless.
로터의 합금비율이 계산해보면 대략 7.6kg 중 알미늄(비중 2896.2kg/m^3:1.39kg-48%)와 은(비중 10500kg/m^3: 5.86kg-52%)정도인데 세상에는 그런 비율의 합금은 없고 직접 녹여서 만드는 방법 밖에 없네요. 현재 은1kg에 120만원 정도니 로터를 제작 할려면 1000만원 이상 들어가겠네요..
Thank you very much for sharing this patented and kept secret design, complete with measurements and construction specifications. Now it's up to us all to independently replicate it and set ourselves free alone, living with this possibility only among us citizens, we must all obtain this technology privately, so we have the possibility of being able to enjoy energy for free. Thanks again from the bottom of my heart, may the gods bless you. Now I will build it for myself.
Have you ever seen a 20000 watts generator or alternator? Just look at the magnet and coil size and guess , is it possible to get more than 1 kw power out of it?
I would take a couple kw! Even if something like this sold for a couple thou US, it would be comparable to solar. Without the logistical and that nasty cloudy and night time thing.
15:05초 전원 분리 시 모터의 회전수는 소리로 비추어 감소 하는데 사용 전력은 전혀 변화가 없더군요. 또한 마지막 전원 스위치 차단 전에 모든 장치의 전원을 먼저 끄던 것을 사용 상태 그대로 두고 모터의 전원만 스위치 오프 가 아닌 콘센트 분리로 보여 주었다면 더욱 확실한 검증이 되었을 것인데 대단히 아쉽군요.
I watched - They don't want to share fir the All the Good for Humanity... No reason to support this channel... Unfortunately, the Humanity Need to pass Great Reset with a distraction as a filter...
Ok, I have a question :) Why did you use a different meter to measure the current? Maybe because it would still show 0 volt :) I watched your first prototype and what you're saying doesn't hold up. In the first project that worked on a similar principle, the key element was the "supposedly special" magnets. Now it turns out that magnets can be ordinary and in this project now there must be a special metal alloy on the rotor :) If you say that the rotor is a key element here, it must be wrong
@@chaoskiller1758 then explain to me why in the first project you didn't need any special metal alloys to make it work only magnets? And now they changed their mind because the version with magnets is easy to disprove because there are only 4 possibilities how the poles of the magnet would be distributed to check it yourself :) The version with a rotor is better because it is an alloy and they can always say that it doesn't work because you have wrong proportions and in fact what the rotor is made of does not matter because the aluminum alloy with silver has no magical effect here
Exactly my question. Let them produce the generator and we can buy it, those who can make it can go ahead on their own. Of this system is real them Mass produce it otherwise it is RUclips geek device. Respond please. Thanks
One thing that always bug me that would like to have cleared up: Let us just say your motor generates more energy than it consumes. Bravo. The energy is recirculated back to the motor with more energy to spare. This extra energy is our free energy supply. My questions are this: How does the extra juice not fry the system? Does the motor redline? If the energy builds up exponentially, the system will destroy itself. How do you vent out the extra current?
@@ravvenhawk1110 ya but 75w - 12kw = net positive on power, from this one could scale it up according to needs. for ex. 2x or 3x that power could power a tiny house buy its self or half that for a drone to carry a human.
Is not Good your answers. Les bobines de micro-ondes génèrent par induction du courant grâce aux champ électromagnétique du 13 A par bobine ce qui fait 52A donc 52Ax230V=11997W soit environ 12Kw
Бывают же такие скоты, которые ради лайков дурят людей. Не ведитесь на это видео. Такой "генератор" не может работать. Здесь от первого до последнего слова одно враньё. Материал ротора, как утверждают, специально разработанный сплав. Если бы это было так, то материал был бы однородным. А на видео видно, что ротор изготовлен из некачественного пористого какого то алюминиевого сплава. Почему магниты не цельные, а состоят каждый из трёх плоских магнитов? Они разработали специальный сплав ротора, а подобрать цельный магнит с необходимыми размерами не смогли. Три "слипшихся" магнита никогда не будут иметь такую же силу притяжения как один цельный магнит с такими же размерами как у трёх "слипшихся" магнитов. Просто поставили те магниты, которые в данный момент валялись без дела. Такой генератор может и выдаст какое то напряжение при принудительном вращении его ротора с магнитами, но как только в цепь катушек двигателя будет подключена нагрузка, появится противо ЭДС, которая сразу будет тормозить вращение ротора. Этот генератор не обеспечит даже своё самозапитывание, не говоря уже о четырёх калориферах. Мужики не тратьте время на повторение этого бреда. Купите лучше жене и детям подарки.
The Magic of the Rotor? The density given is 7.081 g/cm^3 this is 7081 kg/m^3 which is about twice the density of most aluminum silver alloys which are about 2500 kg/m^3. There is a large gap in density and there must be something heavy that makes this density so high. Steel is 7850 kg/m^3. This density is actually the same as neodynium 7040. White metal is 7100 which is almost the same. So, my question is that the density given is twice the density of all listed silver aluminum alloys. Is this to throw us off? There must be a heavy metal somewhere in this alloy where it gets its mass or it has more silver than most silver aluminum alloys.
@@thelibertyengineproject7966what's the measurement of the rotor, before you started opening spot for the magnet and opening and other space for the motor to be connected unto it
They don't want to share fir the All the Good for Humanity... No reason to support this channel... Unfortunately, the Humanity Need to pass Great Reset with a distraction as a filter...
I see how it works You're a magician with a magic trick and you're keeping the magic trick secret but generating enough interest on RUclips that you can make money! Brilliant! You even have all the correct views not to show any details and the music is perfect for a magic show!
I uses 4 x primary micowave transformer gal 900 e4 coils wired in only the ac ones, nimdium magnets, 12x 3 North and North pole up and down South and South pole left and right And a 1400 rpm induction motor with starter capacitor
I replicated this, here in the UK and found that I was getting 236V at 50Hrtz. Is mine more efficient? Have since added a third phase into the induction side of things and now generate 425V at 50 Hrtz. Would you like me to send the schematics? Can't believe why no-one believes? Can't believe the comments! Can't believe I'm still watching 🙈🤣🙃
Hi congratulations you hit the home run!., You lifted the veil to a new light., Very grateful., Lest keep breaking barriers. Got a question an really hope you comment on it. , Do you think this could apply to a 3-phase motor to generate 3-Phase out on the similar set up thanks.
Trimakasih sobatku telah memberi pengetahuan pada semua orang mau tanya kabel imelnya ukuran berapa dan berapa putaran dan juga ukuranya karen berapa x berapa trimakasih
21:16 through 21:33 "We cant say, but we can give a very important clue." He references the rotors dimensions a second time, volume of rotor=1073.3 cubic centimeters, weight=7.6kg as well as the 2 known metals of the rotor, aluminum, and silver, "among other materials". I wonder if the "other materials" could be deduced based on the known weight of aluminum and silver, and the known weight and volume of the rotor alone. or if we'd need to know the proportions of the rotors weight that's aluminum/silver. I don't suppose the creator could provide the percentage of the weight that's silver, the percentage of the weight that's aluminum, and the percentage of the weight that's unknown could he? As well as how many unknown materials are present? 2 other scientists in the field of free energy, John Hutchinson and Floyd Sweet both had devices that utilized barium to some degree. Barium ferrite in Sweet's self oscillating magnets, and barium titanate in the Hutchinson crystal converter cell. Both scientists also conditioned their barium related materials with their own process. Hutchinson used high voltage to condition his crystal cells while they were cooling down, and Sweet used an electromagnetic conditioning process on his barium ferrite magnets to set the barium nucleus into self oscillation. For anyone else looking into building their own one of these trying to figure out what the rotor is made of, id begin to suspect that barium, soft iron, barium ferrite, barium titanate, silicone, and possibly even some other minerals, or combination thereof is possible here. But if i had to guess, id say that barium ferrite is our missing key here. the ferrite would help the rotor induct those eddy curents out way faster through the aluminum/silver mix and the barium to tap the oscillating nuclear potential.
Désoler je ne peux pas m en empêcher mais à 14min30 c est la pépite 😂😂😂 il débranche le moteur entraînant le système avec 3 chauffages en marche et rien ne change dans le régime moteur 😂😂 jpp
Hi Liberty Engine I’m building one copy of your generator with three-phase asynchronous motor, can you please put the link where to find the N52 neolithic magnet, with your measurements i can’t find online Thanks in advance
When The Frequency Meter Read 50Hz My Mouth Hit The Floor, If Anyone Knows The Secret Of 50hz, Then You Know How Powerful These Electromagnetic Motors Can Really Be For All Aspects Of Human Living To Stay In Perpetual Balance With Nature....
I am a paid member. Question-I understand the paramagnetic rotor (I think) but there are a different number of poles on the motor and generator. Can you explain that better?
They don't want to share fir the All the Good for Humanity... No reason to support this channel... Unfortunately, the Humanity Need to pass Great Reset with a distraction as a filter...
Hi, you did a great job!
With my friend I'm planning one almost the same as yours, but mine will be 10 KW with larger magnets, the current can be selected 110/220v with the different sockets. The whole frame will be made of hard aluminum, the starting system is recoil like yours.
I will use it privately, I will make prototypes to sell privately to all those who want to save money, for a house in the mountains, by the sea, etc.
Good job everyone
And i plan to build a universal motor that is driven by my undivided love that will put the whole world into the golden age. Yeah.
And hopefully not mysteriously disappear 😮
I'm interested
Will you ship to Canada? I'll buy one
There’s a sucker born every minute 😢
Weird how you’re like “here’s all the info you need to build this” alongside “we can’t tell you the exact details”. What’s your aim? If this is legit it would prove all the conspiracies right and mean you’re in grave danger. The only way to save yourself is by making everything freely available.
The aim is all the ads you watched.
@@dmann55398 correctly
😊👍👍👍💯
I havent got an ad yet while watching this video
Very true
Alloy composition (With the help of AI):
Silver: 77%
Aluminum: 15%
Copper: 5%
Manganese: 3%
Key adjustments:
Slightly lower silver content to reduce electrical conductivity and minimize eddy current losses from induced swirling currents in the rotor.
Higher copper content to maintain conductivity, but manganese added to counteract copper's tendency to increase eddy currents.
Manganese additions also increase resistivity, which helps control eddy currents.
Manganese provides good hardness and tensile strength as well, substituting for zinc.
Lower conductivity alloy helps reduce magnetic brake effects from induced rotor currents opposing the rotating magnetic field.
Other refinements could include:
Trace boron or silicon for further resistivity.
Grain refinement and heat treatment to break up the crystalline structure.
Semi-conductive coating on the rotor surface to impede eddy current formation.
Can anyone comment?
What question did you ask AI to come up with this equation?
@McFlysGaming p0:In the context of a perpetual electricity generator, only knowing that the rotor prototype holding the magnets is made of an alloy composed of silver and aluminium for the rotor. a very important clue is that the alloy is composed mainly of silver and aluminium among other materials. The total volume of the rotor is 1073.3 cubic centimetres and it weighs 7.6 kilogrammes. also was applied special treatments to this alloy. Suggest what this alloy is made of and provide all the proportions for each compound.
p1:Suggest a composition for this rotor to work in an optimum way in the context of an electrical generator.
p2: Take into account eddy current and magnetic break, things we want to avoid for the alloy
I got this from AI
If cost is not an issue, and the silver content needs to be more than 75%, the composition of the alloy for the perpetual electricity generator rotor could be adjusted as follows:
- Silver: 85%-95%
- Aluminum: 2.5%-10%
- Copper: 1%-4%
- Zinc: 0.5%-2%
- Nickel: 0.5%-2%
- Magnesium: 0%-1%
- Titanium: 0%-1%
- Beryllium: 0%-0.5%
- Silicon: 0%-0.3%
This composition would have an even higher silver content, which would provide even greater electrical conductivity than the previous composition. However, it's important to note that increasing the silver content beyond a certain point can also reduce the mechanical strength of the alloy, so this should also be taken into consideration.
Again, the exact composition will depend on the specific properties and performance required for the perpetual electricity generator rotor, but this provides a general idea of how the composition can be adjusted to increase the silver content.
My idea is 82%Sn, 17% Al and 1% Ag
@@happy2be3one Tin is a good idea but it’s mostly silver and aluminum. According to Artificial Intelligence, it cant have to much aluminum because it start to lose back emf impulse.
Thanks!
You guys did a great job!! It would be great if you could take an old car body, like a VW Bug, put an electric drive motor in it and the Liberty Motor and drive it around, that would be too cool.
I reall wish those of us who do not have a machine shop could purchase the parts and put this together for our own family home use.
pour arriver en procedure de coulage de fonderie avec les composants annonces le process doit etre realise sous HAUTE PRESSION,car les temperatures de fusion sont toutes differentes ,le degazage et la restructuration moleculaire egalement.tout ca pour dire que cette "recette miracle"est une grosse arnaque car pour le commun des mortels ,c'est inaccessible donc inverifiable .quand on regarde attentivement l'aspect du rotor ,il est parsemé de bullage .le moteur utilise ne correspond pas du tout aux specificites annoncees (RPM dimensions d'arbre ,nombre de poles et sur le boitier ouvert en demonstration le positionnement des barettes de connexion donc apres avoir decortique toutes ces infos la realite est que C'EST UNE GROSSE ARNAQUE. le depot de brevet n'existe pas non plus (verifie aupres de L'OMPI ainsi que tous les organismes internationaux la pseudo conference de presse a ete piocheé sur une apk TV DONC ARRETTEZ DE PRENDRE LES GENS POUR DES IDIOTS .la diffusion de FAKES tout ca pour escroquer les personnes credules .bientot une petite enquette feras stopper cette aberation et il faudras rembourser tous ceux qui se sont abonne pour avoir LES PLANS SECRETS DE FABRICATION
@@franckverdu7140 Pouvez-vous croire le nombre de personnes qui penser que c'est réel ? J'aimerais vendre à ces gens un paradis tropical dans la toundra arctique ! Je pense qu'ils ont dit que l'alliage était un mélange d'aluminium et d'argent. Puis il a poursuivi en disant qu'il n'y avait pas de courants de Foucault. C'est alors que j'ai commencé à éclater de rire. Comment diable 2 matériaux extrêmement conducteurs comme l'aluminium et l'argent peuvent-ils ne pas avoir de courants de Foucault !? Ferriday et Maxwell devraient ressusciter d'entre les morts et se tenir dans un coin de la pièce et rôtir ces idiots jusqu'à ce que leurs parents les renient pour leur stupidité ! Haha!
Yes put a quiet version of that in an electric car so it generates its own electricity. Yes.
go watch troy reeds driving a midsized automobile 12 years ago...
How do you expect anyone to believe any of this really works if we can't get full details and disclosure. And why is this motor not front page news .we should be driving cars with this type of motors.we should all be powering out lives n homes with this device. You guys would be multitrilionaires
Great innovation that helps mankind world wide. Superb invention!
I just hope that one day we all can have this.
nice home decoration
La energía absoluta es un misterio pero tu trabajo es bastante creíble y razonable al vencer la ley de Lenz
Por otro lado conseguír un equipo para la venta es posible
It's already in the pipeline to make it illegal for anyone to own any device that's not licensed.... licensed by the government😂
Не дочекаєтесь :(
Wow very Useful this Project I like it, I will made it, many Video i watch in YT only this Vedio very Convinceng thank you for your effort and sharing your Project not for your content you Vlog but very useful to you Subcriber..God Bless You mor Power.
amazing guys, i cant believe you continue to update, this is the real deal, hope someday you decide to release all information for the public to replicate those devices and become independant from oil companies, this is the way! thank you
This IS the information you have been waiting for.
@@ScottFogarty-iv9wt i believe we need to know the exact specs of the rotor alloy to be able to do it as i understand it has strong relation to the distance and type of transformers being used
@@MrBademy Hello Valentin, I totally agree with you. It would be wonderful if ALL of the work that they have done could just be handed over to us. It seems to me that is has been, with just a little more work left to be done. I read that someone was "hoping" to be able to have this technology "some day", in the "future". The action of hoping is waiting. We all have been hoping and waiting for something like this to come along and now it has. I think they have explained their position pretty well. I am so thankful that they have given us what they have. Now what are we going to do with it?
@@ScottFogarty-iv9wt Yes i completely agree with you, but I have one small conflict in my head, they want to change the world they want to solve the energy crisis and government control, and else on the other hand this well-kept secret, and cannot be sold commercially and they will never do, because of oil companies will never release that secret to us, so the cycle is closed and nothing happens. So this cannot be sold ever, the only way is by replicating, why not release all to us in this case with the goal to change the tyranny and corruption of the government systems. And again they do release already enough details and am glad that they are doing this and really grateful. My question is now can anyone replicate it and have you succeeded so , that would be the proof
@@MrBademy from what I understand it is a silver/aluminum mix. You can find alloy makers that make it with 5% and 10% silver mix. I would guess it is one of those two!
Thank you for your generous good deeds. sharing ideas. I love your ideas of free energy and further helping people in hard times. I hope RUclips doesn't ban you.
This appears to be the modern day equivalent of the alchemist's dream of turning base metal into gold and flies in the face of physics.
the great thing about science is that it's new understanding and discovery drives its growth,or should because the laws of science are never complete or fixed yet, big industry hides discovery for profit. establishment science peers barely recognise citizen science which is a disservice to mankind because it is where all invention outside the 'laws of science' is to be found,outside of the box..sadly much invention is literally murdered, I have direct experience of this..proof if you will..
not really, the second law of thermodynamic states the sum entropy of a closed system can NEVER decreases, it was falsified and proven to be incorrect when heat pumps shows COP > 1 for energy transfer which is reduction entropy.
Thermodynamics has its uses but lord Kelvin was just a man and just because he was a lord doesnt make his theories laws.
I dont think it does. What they have done is minimized or eliminated the eddy currents. I saw a video years ago with some people doing something very similar. Get rid of the eddy currents then the magnets will pull it around with very little friction. He just made it way more efficient.
@@aywitb911 Do you really think the conservation law of energy is only valid if eddy currents are present? By minimizing eddy currents you can increase the efficiency of a working device but minimizing eddy currents doesn't make a non-working device work.
@@heinzpg Uh have you completely forgotten about the magnetism. That is whats used to spin the device. Its the field coming from the magnets, once they die out however long that is then it wont work anymore. Its not really over unity its just creating energy from the magnetic fields. They go away and so does the energy.
Selamat saudaraku telah berhasil menemukannya, semoga bermanfaat untuk umat diseluruh dunia. ❤❤❤
Ive seen many of your vids, on the earlier ones you said you would give last details to diy our own build. Im sure you understand everyone skepticism. If it is possible you should open source this so the technology is not lost when big money comes, buys, hides it from the people.. i know you have talked about that. Others have to be able to replicate.
I agree it needs more community support.
It’s easy asf my uncle can replicate it he’s also invented power beat batteries and many other devices that work your just an amature that knows nothing
@@chaoskiller1758 you will end up dead that way
don't believe the promises
The only one true way to do this, is to make a video from start to finish with everything you need. Release it to the world, and watch it change this world overnight!
patent konusunda iyibi açıklama yaptın hem kendi adına hem ülken adına hemde dünya adına net ve pozitif açıklamalarda bulundun heerkes senin gibi olmaya bilir bunun için teşekkür ediyorum hem dünyanın hemde gelecek nesillerin senin gibi insanlara ihtiyacı var başarılar dilerim TÜRKİYE DEN sevgiler
Thank you for doing this great service, this engine will help me make a 2X version for my land and sea house that I will build some day. This would make a drone fly forever BTW!
The millennium falcon power blender for wet bar
لتطير حتى الأرض السابعة والعودة إلى مركز الأرض وهكذا دواليك وبدون توقف ايعقل.
مع أن الفكرة غير قابلة للتطبيق
I hope that one day it will spread throughout the world.
it will
They don't want to share fir the All the Good for Humanity... No reason to support this channel... Unfortunately, the Humanity Need to pass Great Reset with a distraction as a filter...
Brawo, dzięki za info
będziesz coś działał? to daj cynk..
Thanks a lot, God bless you for sharing this engenering, it can save a lot of People's Life.
Im in love with it.... Congrats!
Protect these men at all cost!
This is so beautiful and honest.....hands down....the best video on youtube.....thank you so much...love you guys
I don't agree. There are better fakes on RUclips than this video.
You guys are the greatest! I’ve always knew this was possible , and you guys have done it !
It people like you guys that will change this world ! God bless and stay safe , don’t let Uncle Sam sweep this under the rug …
Dziękuję ❤
jakbyś coś działał..to daj cynk..sam jestem za cienki technologicznie..
You give a new name to this electronic system,, Tesla free electricity system,,for all human all companies 🤱🧠🔊💯come in India bro
I love seeing that people are already building this. I'm working on another invention with electromagnets to get the money to build one of these myself. Your design seems even simpler than mine. I do have questions though. Are all the magnets running together, or do they alternate? How do you keep them cool? How do you regulate the voltage sent to the magnets? Could I buy one of these for myself? I could actually skip my own build, and move to the next invention without having to go through the whole distribution process. This is a Tesla idea. It was meant to move humanity to the next level of freedom. That's why they killed him, and buried his ideas. I've had this idea in my head for quite some time now. I've told many people about it, and saw their eyes light up when they thought I just gave them a billion dollar idea. I tried to explain to them that they can not patent this idea. If you do, they'll come after you. They don't seem to get it. It's such a simple design, and once the technology is out there, anyone can build it. I love this.
They didn't kill Tesla but stole his ideas, a family member of Trump one of the first, and JP Morgan
Dream on baby
Wtf am I on earth?
You must have knowledge
There's no power here
Hi there ,this is excellent job you have done .
Hello, I see that you are not answering a single question that I asked you. Where is the phase shift on the stator part where the coils are placed. There are not any! because to create a phase movement it is necessary to have a phase shift as for the part of the single-phase motor because otherwise the voltages cancel each other and the system cannot continue to turn. So how do you do? I am really waiting for a response from you. THANKS
FYI. It only has 2 phases. Each with two windings (facing opposite to each other) connected in parallel..Separated by 180 degrees apart.
так там конденсатор стоит он и дает сдвиг .
I wish I could help develop 3.5 and beyond. I would rather use my intellect for this project than work a regular job. Blueprints are welcome 🙏🏾 but your craftsmanship and design are second to none. Can I have one? This is more than liberty it’s Freedom. Be safe and Godspeed!
Assuming the alloy is Silver/Aluminum only, the proportions are roughly 56.24/43.76 volumetric and 83.31/16.69 weight ratio Ag/Al.
The other unknown components might alter the proportions of these two. The price of roughly 6.5 kilos of silver is around 5.2 k USD.
Investing that much in the rotor would be quite a leap of faith...
yeah but if it works.... also IF this is pushing 20 KW of power it's substantially cheaper than a generator of the same strength
I think we need to find the correct patent and study it...
God always blessing you... Good luck!!!
Ini sangat bagus, terus lakukan uji coba untuk daya tahan dari partnya jika alatnya bekerja secara terus menerus tanpa henti, saya mau alat ini diproduksi masal, atau diciptakan lagi alat dengan skala yang lebih besar sehingga bisa dipakai sebagai pembangkit listrik yang akan berfungsi menerangi sebuah kota secara Gratis. Ini sangat bermanfaat sekali bagi manusia.
Tapi bahaya Bro, mafia batu bara gimana nanti? pemerintah gimana? (khusus di Indo)
Am from India can u please help in knowing that the current generated by microwave coil is DC than how can you directly connect the same to AC motor fitted with capacitor and it's working please explain
Satu coil harus berdaya 220 v.... Itu ada 4 kayaknya masuk akal jika 1 koil konsisten untuk pembangkitnya
Но не для нафтовеків, урядів, міліардерів, і тих хто керує, світом, думаєте, це вже не винайдено, це вже давно винайдено, і приховано, і вже давно, світ направлено, в другу сторону, всі вчені перекуплені, навіть тесла, томі це і не виплело, а потом він продовжував, і вбили, всі вчиня в інстетутах, школах, все щоб вивчити дітей людей як їм потрібно, інакше, би людям непотрібні би буле вони, і льди би не булиб рабами. Люди ця брехня вже 1000 років. В світі багато чого можливо, просто нас вивчили так що ми нічого не бачимо, з самого малку.😢
Melihat dari proses pembuatan generator dengan magnet permanen dan menghasilkan arus AC untuk menggerakkan motor, idenya sangat bagus, kalau sudah diproduksi masal , harganya pun tidak terlalu mahal . mantaaap
It Will Be Viral And Will Be DANGEROUS too..
....I Hope Nothing HAve Anything Case Bad...
Congratulation..
The first law of thermodynamics states that energy cannot be created or destroyed in an isolated system. It can only be transformed from one form to another or transferred between different parts of the system. In other words, the total amount of energy in a closed system remains constant.
Це теорія, а не закон.
Correct but who said this system is closed ... or we can't open it. There seems to be some weard ssht happening when large mass spins fast especially when coupled with electromagnet spectrum. We dont yet underestand how universe really works - keep an open mind, most groundbraking discoveris were treated with hate and ridicule but to day we are using those ridiculus things ☺
Indeed for a closed system, for open systems in resonance, these laws don't apply
@@viljar1112 "Weird shit happening" sounds conspicously like "then something magic occurs". What does "large mas spinning when coupled with electromagnetic spectrum" even MEAN?
But of course, the test for any theory is not what it SOUNDS like, but if it actually works. Has this theory been put to the test outside of the genius's lab?
In any system large enough to avoid quantum dynamics, that's quite correct. Smooth flow, as this is, simply can't do what he's claiming. IOW, for this system to actually work, I'd expect to see frost forming on the outside of the engine as it pulled energy from the surrounding heat. Anyone who had a discovery that produced far more power than the input doesn't NEED to impress any physicists or such, they just need to hit up their friends for investment and start up production in a factory in China for the parts, and put them together in the USA. I GUARANTEE you the Dept of Defense doesn't give two flying whoops about theory, they'd buy ten thousand such generators in a heartbeat, IF you could demonstrate they worked with a real load, and could indeed run a day or two without stopping. The US Navy alone would want thousands of them, they'd LOVE to replace their subs nuclear reactors with a "never surface again" power supply. If it's easy enough to build at home, get China or India to cast up the frame and parts, and start selling them. There'll be plenty of customers - IF it is shown to work. Sigh. This nonsense has been around for my entire life, and history says it goes back much further, and somehow, despite the obvious demand, NOBODY has sold one that could pass an independent test yet. And don't gimme the "oil companies" thing, DoD doesn't care two whits for big oil, and would LOVE to cut off that billions of dollars of yearly expense and put it into developing new weapons.
You guys are awesome, I'm proud of you, thank you!
Amazing how when each heater was turned on the generator didn't bog down whatsoever. That definitely made me skeptical...
I think there is a catch with the distribution outlet when it was turned on. If it is not connected to the network, the indicator should not light up. And why did it light up for a sec? Although, perhaps, the capacitor was discharged on the neon lamp!
@@НЕЗНАЙКАТВ even if you only turn it by hand, there will still be a small generated voltage enough to light the lamp.
@@simplethings2410 You mean lamp on the button of the power outlet? If you watch the video slowly, you'll see it. I plan to make a copy of shown "liberty engine" to prove or disprove the idea. It looks like two coils would be enough to power the motor!
@@НЕЗНАЙКАТВIt is just the two coils facing each other that is connected in parallel lights the lamp..and the other two coils connected also in parallel powers the motor..There is no electrical connections between the two sets of parallel coils. They are two different circuits..Whatever happens to the coil set where the lamp is connected, does not affect the other that is driving the motor. You can obviously see that in the electrical diagram.
@@НЕЗНАЙКАТВ Watch the clip again and you will see that it is the light coming from the ceiling of the workshop reflects to the light button that is why it looks like that light it is enrgized prematurely. It is just a reflection of the light above.
excellent ,voila un bel exemple de l'ingénierie libre.bravo
Se agradece el haber compartido algo k las industrias de todos los países tratarán de apropiarse x lo tanto deben tener cuidado de sus personas
X otro lado, es un modelo k permite ser autosuficiente de la energía de las grandes corporaciones k brindan este servicio y k este sistema los va a perjudicar
Quienes se decidan a construir este Generador de Energía Libre, deberá mantenerlo en secreto y ayudar a quienes quieran este sistema xk muchas personas solo se dedican a mal informar sobre este tipo de inventos
Gracias x apreciar el trabajo k realizan en este canal, estoy dispuesto a construirlo y ya reportare k paso con este proyecto, sin más, muchas gracias de nuevo
I am very happy to your invintion amigo because u are kind and very talented like Tesla to give more idea to the universe to give possible light at all around the world power with out any problem like to buy gasoline or any part of ur invintion almost zero maintenance brother you are good people I hope used this for small tiny house every day life used like anything like light,fan, electric iron or etc.bro bravos amigo iam very proud of it ur the One amigo!
Super,ďakujem chlape
WOW !!!!!! Hot dam free power ,yep that's genna piss some peeps out there off ,incredible engineering, well done 👍👍👍
Вы конечно молодец что это заделали ну и другим дайте возможность сделать у себя дома это будет отлично 👍
Absolutely true, The world waits for this God's gifts that will sustain enough Free Energy for generations to come..
I'm not an engineer or electrician or anything like that, but it seems to me like the only function of the rotor is to hold the magnets.
Couldn't it be made by a block of acrylic plastic or even some laminated hardwood or plywood?
No eddy currents in those, and the RPM isn't fast enough to rip the rotor apart.
I also agree with others, there's no way anyone will survive trying to make money by an invention like this (if it actually works).
The oil companies will bury both you and your machine until the last drop of oil has been squeezed out of the Earth.
Only chance of survival is to make ALL information about this freely available online so that it will be copied and spread.
I am thinking the same thing.
Yes and the thing is oil is not scarce, they just want that we think that it is scarce. It is created about 200 km deep in the ground and is naturally created by the earth because of the heat and pressure.
@@alenpasnikov Oh I thought it was just crushed Dinosaur bones and plants! [sarcasm]
Peeps, they've lied about nearly everything. We need to recalibrate our minds and seek truths only.
you made it much easier
I wonder if the rotor mass affect it.
Assuming that the alloy is made up of aluminum, silver, silicon, barium ferrite, and strontium ferrite, the likely proportions of the elements in the alloy are estimated to be:
Aluminum: 47.5-50%
Silver: 16.7-17.8%
Silicon: 0.3-14%
Barium ferrite: 32.9-38.4%
Strontium ferrite: 0.9-1.5%
there were other models that came up potentially including small percentages of Magnesium (for structural strength), and potentially even smaller amounts of Dysprosium, Terbium, and Praseodymium(to enhance magnetic properties). but not enough to warrant including for the basic breakdown. magnesium has properties that are emf shielding so i dont know if that would be good or bad in this context, but if you include magnesium to the list then the model im using allows for a proportion range of .5%-15%
Note that this is not including the calculation required to subtract the weight of the neodymium magnets from the total weight before applying the proportion calculation. that would still need to be done to be more accurate. or you could just calculate the weight of the magnets based on the known weight of neodymium and the dimensions of the magnets and then just include the known % of the weight thats neodymium in the proportion calculation. both equations would tell you the % proportion of neodymium in the rotor.
Tnx. This info is very helpful. Much apprciated.👍👏
did you get a prototype with a positive result?
Ur really smart lol, any updates ?
Impressive. How did you come up with those numbers?
They don't want to share fir the All the Good for Humanity... No reason to support this channel...
Sorprendente.. gracias por compartir sus conocimientos felicitaciones
it was allows a capability magnetic repulsion has always been free energy it just needed to be harnessed and worked into a motor. great job and all the very best.
You had me at 50 Hi's ! (50 Hz) 🤣 @1:03
Thanks for your detailed video, you have found me a beautiful work to try and with great joy
You can even use engineering plastic (w/c is lighter) as your rotor for the magnets instead of aluminum-silver alloy. Just make sure to couple your rotor to another flywheel in the same shaft that weighs 7.6 kgs minimum (same as his). It is much better to have a slightly larger diameter fly wheel to have better rotational energy (moment of inertia). The fly wheel can be made of mild steel to make it cheaper. You can use this formula:
Moment of Inertia = 1/2 x (mass in kgs) x (radius in meters)² - "take note of the squared".
Take note also that the moment of inertia of yours should not be lesser than his to maintain an effective rotational energy at 1500 RPM. At that weight of the fly wheel, the speed of the system will not change significantly even if you remove the power to the motor for a couple of seconds or even you put bigger loads.
@@simplethings2410 thx for your reply, but you've already tried and tested if it works or its just theory?
If you haven't already, you really should get in touch with Dr. Steven Greer.
I told Greer about this…
@@pedrosura Any reply?
Loving the follow up video! Many thanks!! My prototype works but need a closer material rotor/ flywheel 🙃
would you mind sharing your experience and results please :)
yes, it can work well without the rotor
@@janengel1985 do you have any practical demonstration or video, i`d like to give a try i suppose some parts can be expensive so i dont want to waste money , thought i am a true believer and i already have 2 electric motors playing with the capacitors and diode bridges, but this looks much simpler than what i am doing
@@janengel1985 진짜로 성공했나요?
@@MrBademy you can't make electricity from electricity, try to make something mechanical and then connect coils, diodes and capacitors
If this concept were truly functional, you could distribute the necessary components across various companies, avoiding any legal entanglements by merely selling these parts for various purposes. You could create a RUclips video showcasing where individuals can purchase each required component to assemble it. However, it's evident that if a setup as simple as connecting a squirrel cage motor to a coaxial flux motor could generate substantial energy, it would have been achieved long ago.
Je me demandais comme pour les autres brevets, ou était la porte de sortie pour rendre ça crédible, et arrive le coup de l'alliage mystique, inventé par Luc Skywalker et valider par l'empereur lui même... Bravo, ce mystère va nous emmener vers une autre vidéo encore plus succulente 👍
Luke skywalker power dance club box
Je pense que c'est une machine à karaoké !! 🤣 C'est très déprimant de voir combien de personnes croient réellement à ces bêtises.
T'as un iphone et la télé tu crois qu'on a tout découvert? Les physiciens du moyen age qui postent pour faire le clown avec StarWars
Un capo lavoro namber one no coment !!!!!
Спасибо ребятам 💛💙👍👍👍💪
Это бред, я тебе такой же тест с тыквой вырабатывающей 100 квт сделаю. На этом видео минимум два способа как обмануть зрителей. Оба отпали бы при поднятии агрегата. Но нет он его не трогает
@@alexfast6620 we know it's a trick
@@alexfast6620 Тільки так! Це фейк для заробітку на ютубі.
@@ВолодимирПироженко-э2ж Самый простой способ проверить эту систему на работоспособность и доказать, ЧТО ЭТО не ФЕЙК :
!!!! Убрать всё лишнее: металлическую раму ! Лишние провода и блоки ! НЕ КРАСИТЬ НИЧЕГО !!!
1. Прикрутить двигатель к прозрачной _!_ -образной из плексигласа стойке.
2. Навесить на вал барабан с магнитами.
3. На вертикальную пластину плексигласа, где закреплён мотор, вокруг барабана прикрепить катушки с сердечниками.
4. Рядом с катушками разместить по 2-ной розетке на каждую катушку и подключить соответственно.
5. Ничего нигде не соединяя, включить мотор в сеть 220v через Ватт-метр.
6. Далее -- нагружаем катушки разными электро-потребителями так-же через Ватт-метры -- проверяем ВЫХОДНУЮ МОЩНОСТЬ генератора !
7. И на финише, отключив все нагрузки, проверяем САМО - ЗАПИТКУ ... ; когда система наберёт обороты, -- быстро переставляем вилку мотора
из сети 220v в любую из розеток генератора.
( Может придётся пробовать разные варианты: выбирать розетку, менять полярность вилки, соединять по-парно параллельно
противоположные катушки через розетки двойным проводом с вилками на концах ! Что-бы не было на системе лишних "соплей" !!! )
Потом, работающий агрегат, перенести на стеклянный стол ....
Иииии..... , если мотор не остановится -- ЗНАЧИТ -- -- ПОБЕДА ...!!! ЗНАЧИТ -- НЕ ФЕЙК !?
@ВикторЛапутько They don't want to share fir the All the Good for Humanity... No reason to support this channel... Unfortunately, the Humanity Need to pass Great Reset with a distraction as a filter...
This is amazing sooner or later everyone will have one or more
Back in the 70s and 80s on the Jonny Carson show if anyone out there can remember there was a man that is the creator of this great invention he used magnetic energy to power a light bulb this is truly astonishing
That was Joseph Newman. It aired in Feb '86 same year I modified an input circuit for him to replace his waste of time looking for batteries.
@@MX6MAXIMUS You talk big for a nobody!🤨
Ty not only works it looks great too!!! 👍👍👍👍
I have a feeling im going to be seeing this channel in a debunk video
100%
Felicitaciones amigo
Man, your good!!! And how about those magic wires!!! At 53 amps output that whole thing would be smoking and melting down even if those motor wires didn't melt like fuse links in just a few seconds...
This will never see the light of day unless it is shared open source with the public. The patent process has a history of supressing over 5000 amazing technologies like this one. The current energy industry will stop at nothing to prevent this from coming out. Why would they ever be ok with it? The world needs this so badly right now. People are suffering. We shouldn't have to be slaving away to have electricity anymore. We shouldn't have to pay to live on a planet we were born on. Everyone deserves a home and access to power. This needs to be released before it is taken away for good. Secrets make us weak and vulnerable to crimes against humanity. All anyone cares about is money. Be a hero and let it out of the cage before you lose the chance.
That being said...thank you for showing us what you have. Hopefully we can rediscover the silver aluminum alloy process, and recreate it. Sounds really specific and hard to figure out. Thanks for the tease. I can't decide if I'm mad at you or not. Add another to the "almost got it" list...
This is my first time watching this and if this is legit and works I sincerely need to say thank you. We all need to work together and rid the evil aka govt from all nations. Electricity is everywhere constantly and there's no reason we all should have free energy.
If it was real they would sell the plans but 3.99 to be in the dance club aint bad
Thank You,
Very good job !
Gaetan
Dear Inventor, I have few questions for you.
1. How you are maintaining constant cycle of 50 hz frequency.
2. Also how you are maintaining constant voltage of 110 or 230 ?
3. You said in video that you have created an alloy material to get the weight of 7.5 kilograms for the rotor. Can it be any other material with same weight
4. If the rotor weight is different and 7.5, what will happen?
The secret is that it never worked in the first place lmfao.
@@eppicshotgun1281 If it was viable, ...and if there goal was to truly help the world, ...THERE WOULD NOT BE A "MEMBERS ONLY" COMPONENT! GTFOH!
farce , never happened !
Couple it to a heavy flywheel, run the system and afterwards, remove the power supply to the motor, you will see that the frequency and speed will remain the same for quite some time. The heavier the rotor to stop turning, the longer for it to be able to sustain the speed even you remove the power to the motor before it coasts down.
Actually the heavy rotor is just acting like gosolin engine flywheel which helps in making engine continue rotation to complete stocks cycle or continuing smooth cycle
Be honest can u make another content part about how to assemble/conecting the wire ecspecialy from transformers into the engine?
If this really work and you not going for money or famous you should make separate content for every part so you can teach people as many as you can,
but if you just making this content for click bait of views you did good and done very well in creativity,
God Bless.
로터의 합금비율이 계산해보면 대략
7.6kg 중 알미늄(비중 2896.2kg/m^3:1.39kg-48%)와 은(비중 10500kg/m^3: 5.86kg-52%)정도인데 세상에는 그런 비율의 합금은 없고 직접 녹여서 만드는 방법 밖에 없네요.
현재 은1kg에 120만원 정도니 로터를 제작 할려면 1000만원 이상 들어가겠네요..
and the secret is revealed
@@janengel1985 that's around 10 000 dollars not that bad if this is real I would pay it. Well worth it if you can take this anywhere you go!
Did you make this alloy? How was it discovered that this mix would yeild the results you needed?
274.26 ounces if my math is correct. I hope I'm wrong though
열차단은 어떻게 해결했을까요?
Thank you god for all of us
Thank you very much for sharing this patented and kept secret design, complete with measurements and construction specifications. Now it's up to us all to independently replicate it and set ourselves free alone, living with this possibility only among us citizens, we must all obtain this technology privately, so we have the possibility of being able to enjoy energy for free. Thanks again from the bottom of my heart, may the gods bless you. Now I will build it for myself.
lol
Excelente trabajo de investigación y ejecución muchas bendiciones para todos.....
Send us some result.. peace
How he connect the wiring coil of the microwave oven transformer? 4pcs In parallel to the ac motor?
It could be that they're just heavily invested in silver and this is a way to get people to buy it.
Aaah! We call it a kakstorie-generator where I come from. Nice job.
Have you ever seen a 20000 watts generator or alternator?
Just look at the magnet and coil size and guess , is it possible to get more than 1 kw power out of it?
I would take a couple kw! Even if something like this sold for a couple thou US, it would be comparable to solar. Without the logistical and that nasty cloudy and night time thing.
If we could somehow bend physics then it would be possible, until then we're stuck with solar panels and battery banks.
@@Ole_CornPop I m good with that I have over 10k in solar
❤🎉Wonderful.!!!
15:05초 전원 분리 시 모터의 회전수는 소리로 비추어 감소 하는데 사용 전력은 전혀 변화가 없더군요. 또한 마지막 전원 스위치 차단 전에 모든 장치의 전원을 먼저 끄던 것을 사용 상태 그대로 두고 모터의 전원만 스위치 오프 가 아닌 콘센트 분리로 보여 주었다면 더욱 확실한 검증이 되었을 것인데 대단히 아쉽군요.
이거는 고지말
did you watch the full one-hour test video?
I watched - They don't want to share fir the All the Good for Humanity... No reason to support this channel... Unfortunately, the Humanity Need to pass Great Reset with a distraction as a filter...
Muchas felicidades! Gran invento! Gracias por compartir!
Ok, I have a question :) Why did you use a different meter to measure the current? Maybe because it would still show 0 volt :) I watched your first prototype and what you're saying doesn't hold up. In the first project that worked on a similar principle, the key element was the "supposedly special" magnets. Now it turns out that magnets can be ordinary and in this project now there must be a special metal alloy on the rotor :) If you say that the rotor is a key element here, it must be wrong
your don't know what you talking about go away.
@@chaoskiller1758 then explain to me why in the first project you didn't need any special metal alloys to make it work only magnets? And now they changed their mind because the version with magnets is easy to disprove because there are only 4 possibilities how the poles of the magnet would be distributed to check it yourself :) The version with a rotor is better because it is an alloy and they can always say that it doesn't work because you have wrong proportions and in fact what the rotor is made of does not matter because the aluminum alloy with silver has no magical effect here
Yes I agree to your comment bro how if he hang up the motor so that we can see what's in there below the table
If there's no other way where he get the power supply supplied to the drive motor😊 why it continuesly rotates
I think that's for bloggers purposes only for the purpose of generating monetary value in there blog
Thank you
what will be the cost of this generator? and when is it expected to be mass produced?
Exactly my question. Let them produce the generator and we can buy it, those who can make it can go ahead on their own. Of this system is real them Mass produce it otherwise it is RUclips geek device. Respond please. Thanks
One thing that always bug me that would like to have cleared up:
Let us just say your motor generates more energy than it consumes. Bravo.
The energy is recirculated back to the motor with more energy to spare. This extra energy is our free energy supply.
My questions are this: How does the extra juice not fry the system? Does the motor redline? If the energy builds up exponentially, the system will destroy itself. How do you vent out the extra current?
how come a 0.55kw motor provides 20Kw? thank you
you mean 75W producing 12kw if you were paying attention.
@@chaoskiller1758 no, the technical specs of the motor is 0.55kw, and it produces 12kw, I think because of the transformer
@@ravvenhawk1110 ya but 75w - 12kw = net positive on power, from this one could scale it up according to needs. for ex. 2x or 3x that power could power a tiny house buy its self or half that for a drone to carry a human.
@@chaoskiller1758 thanks
Is not Good your answers.
Les bobines de micro-ondes génèrent par induction du courant grâce aux champ électromagnétique du 13 A par bobine ce qui fait 52A donc 52Ax230V=11997W soit environ 12Kw
Parabéns pelo excelente trabalho e sucesso em novos projetos!!! 👏👏👏
Бывают же такие скоты, которые ради лайков дурят людей. Не ведитесь на это видео. Такой "генератор" не может работать. Здесь от первого до последнего слова одно враньё. Материал ротора, как утверждают, специально разработанный сплав. Если бы это было так, то материал был бы однородным. А на видео видно, что ротор изготовлен из некачественного пористого какого то алюминиевого сплава. Почему магниты не цельные, а состоят каждый из трёх плоских магнитов? Они разработали специальный сплав ротора, а подобрать цельный магнит с необходимыми размерами не смогли. Три "слипшихся" магнита никогда не будут иметь такую же силу притяжения как один цельный магнит с такими же размерами как у трёх "слипшихся" магнитов. Просто поставили те магниты, которые в данный момент валялись без дела. Такой генератор может и выдаст какое то напряжение при принудительном вращении его ротора с магнитами, но как только в цепь катушек двигателя будет подключена нагрузка, появится противо ЭДС, которая сразу будет тормозить вращение ротора. Этот генератор не обеспечит даже своё самозапитывание, не говоря уже о четырёх калориферах. Мужики не тратьте время на повторение этого бреда. Купите лучше жене и детям подарки.
Cuba needs this right about now! I giant version every 30 blocks.
Silver and aluminum alloys cannot eliminate eddy currents, they only remove heat a little.
truth, only laminated materials can do like silicon steel
nice workshop
The Magic of the Rotor? The density given is 7.081 g/cm^3 this is 7081 kg/m^3 which is about twice the density of most aluminum silver alloys which are about 2500 kg/m^3. There is a large gap in density and there must be something heavy that makes this density so high. Steel is 7850 kg/m^3. This density is actually the same as neodynium 7040. White metal is 7100 which is almost the same.
So, my question is that the density given is twice the density of all listed silver aluminum alloys. Is this to throw us off? There must be a heavy metal somewhere in this alloy where it gets its mass or it has more silver than most silver aluminum alloys.
Yes, it has much more silver than normal alloys, but it also contains other materials to a lesser extent. We do not try to mislead
@@thelibertyengineproject7966the % of alloy 60/40?
@@thelibertyengineproject7966what's the measurement of the rotor, before you started opening spot for the magnet and opening and other space for the motor to be connected unto it
They don't want to share fir the All the Good for Humanity... No reason to support this channel... Unfortunately, the Humanity Need to pass Great Reset with a distraction as a filter...
@@thelibertyengineproject7966 Bummer since silver is the most expansive...
I see how it works You're a magician with a magic trick and you're keeping the magic trick secret but generating enough interest on RUclips that you can make money! Brilliant! You even have all the correct views not to show any details and the music is perfect for a magic show!
There's no magic. He just knows how to utilize the energy from magnets and momentum of rotating bodies.
hello, as you don't sell this machine, are there any plans other than electrical to manufacture it? best regards
I uses 4 x primary micowave transformer gal 900 e4 coils wired in only the ac ones, nimdium magnets, 12x 3 North and North pole up and down South and South pole left and right
And a 1400 rpm induction motor with starter capacitor
I replicated this, here in the UK and found that I was getting 236V at 50Hrtz. Is mine more efficient? Have since added a third phase into the induction side of things and now generate 425V at 50 Hrtz. Would you like me to send the schematics?
Can't believe why no-one believes?
Can't believe the comments!
Can't believe I'm still watching 🙈🤣🙃
Good Job. I want to see your electric circuit diagram. Send it to me. plz.
I’d like to see your schematics, and if you can send me the rotor composition that would be great as well.
@@NotJohnUK - Hi John, can You pls send a data how You made it pls!?
At least there is some one who believes it's possible.kindly share your schematic.thank you
Hi congratulations you hit the home run!., You lifted the veil to a new light., Very grateful., Lest keep breaking barriers. Got a question an really hope you comment on it. , Do you think this could apply to a 3-phase motor to generate 3-Phase out on the similar set up thanks.
Yapıyorsunuz bu sporu
Trimakasih sobatku telah memberi pengetahuan pada semua orang mau tanya kabel imelnya ukuran berapa dan berapa putaran dan juga ukuranya karen berapa x berapa trimakasih
인생 이 발전이 이런것이지유 멋져
21:16 through 21:33 "We cant say, but we can give a very important clue." He references the rotors dimensions a second time, volume of rotor=1073.3 cubic centimeters, weight=7.6kg as well as the 2 known metals of the rotor, aluminum, and silver, "among other materials". I wonder if the "other materials" could be deduced based on the known weight of aluminum and silver, and the known weight and volume of the rotor alone. or if we'd need to know the proportions of the rotors weight that's aluminum/silver.
I don't suppose the creator could provide the percentage of the weight that's silver, the percentage of the weight that's aluminum, and the percentage of the weight that's unknown could he? As well as how many unknown materials are present? 2 other scientists in the field of free energy, John Hutchinson and Floyd Sweet both had devices that utilized barium to some degree. Barium ferrite in Sweet's self oscillating magnets, and barium titanate in the Hutchinson crystal converter cell. Both scientists also conditioned their barium related materials with their own process. Hutchinson used high voltage to condition his crystal cells while they were cooling down, and Sweet used an electromagnetic conditioning process on his barium ferrite magnets to set the barium nucleus into self oscillation. For anyone else looking into building their own one of these trying to figure out what the rotor is made of, id begin to suspect that barium, soft iron, barium ferrite, barium titanate, silicone, and possibly even some other minerals, or combination thereof is possible here. But if i had to guess, id say that barium ferrite is our missing key here. the ferrite would help the rotor induct those eddy curents out way faster through the aluminum/silver mix and the barium to tap the oscillating nuclear potential.
looking for this too
Désoler je ne peux pas m en empêcher mais à 14min30 c est la pépite 😂😂😂 il débranche le moteur entraînant le système avec 3 chauffages en marche et rien ne change dans le régime moteur 😂😂 jpp
Hi Liberty Engine
I’m building one copy of your generator with three-phase asynchronous motor, can you please put the link where to find the N52 neolithic magnet, with your measurements i can’t find online
Thanks in advance
N52 є на Alliekspress
@@АлександрЛичман-ц2ч lol I need with that measurements
Tuyệt vời 🎉
When The Frequency Meter Read 50Hz My Mouth Hit The Floor, If Anyone Knows The Secret Of 50hz, Then You Know How Powerful These Electromagnetic Motors Can Really Be For All Aspects Of Human Living To Stay In Perpetual Balance With Nature....
good job bro❤
Aonde podemos comprar essa maravilha????
Me gustaría saberlo a mi también
In dreamland.
I am a paid member. Question-I understand the paramagnetic rotor (I think) but there are a different number of poles on the motor and generator. Can you explain that better?
They don't want to share fir the All the Good for Humanity... No reason to support this channel... Unfortunately, the Humanity Need to pass Great Reset with a distraction as a filter...
❤❤❤❤❤ Can you put an amp meter all the device while it is running the heaters to see what amperage can be drawn out of the generator ? ❤❤❤❤❤