I finally bought a sewing projector...
HTML-код
- Опубликовано: 7 фев 2025
- Breaking down my adventures into projector sewing, sharing my tips and tricks that I've picked up along the way, along with some resources for you!
WHERE I GOT MY PROJECTOR
rstyle.me/+983...
VIVO TV FLOOR STAND
rstyle.me/+Vzz...
PROJECTS FOR SEWING FACEBOOK GROUP
/ projectorsforsewing
CALIBRATION WEBSITE
patternproject...
USB-C TO HDMI 20 FOOT CABLE
rstyle.me/+exq...
Why don’t you cut pattern pieces on the fold? I have also seen that people will put a metal sheet under their mat or table so they can use magnets to hold the fabric in place.
You can if you want, but I find it's just a better cut without the fold! Cool note about the metal sheet!
nice solutions and great video...
How did you mount the projector into the tv stand? I bought the epson projector and the same tv stand but can't figure out how to screw the tv stand into the projector
I realized I didn't finish the video the first time!
glad you got your answer! let me know if you have more questions. 😁
@@JadeElise i have a similar projector as the one you got, using the same set up. Did you by any chance have issues with a blurry image at the bottom? It is so bad to the point where I can't read the setting options at the bottom of the screen. Because of this, I am having a hard time with copying patterns at the bottom
@@Nicky-zs3rt oh no! i haven't had that happen. are you using the pattern projector website? or is it happening with anything you are projecting?
Does your projector have an hdmi port?
yes!
How did you know what size of bolts would screw into the epson projector?
@@AutoEnthusiastJC great question - I didn’t! I used what came with the tv mounting kit and they fit. 😳
@@JadeElise that’s awesome. I bought an epson 580, which has lower resolution than yours. Do you find the lines sharp enough? It might be hard to compare, seeing how you have only seen yours. Mine is pixilated on the table, but smooths out on fabric. Curious whether to upgrade to the higher resolution.
@@AutoEnthusiastJC I think it’s pretty clear - I’ve actually projected some of my RUclips videos onto my table to see how they looked and thought it was clear enough! Not perfect of course. 😂
@@AutoEnthusiastJCThese projectors were designed for classrooms to be mounted above a white board using a an Epson wall mount. These mounds would come with loads of adjustment to fine tune the image so it was perfect. These were als ways set to H/V keystone.
Go into your menu options and go through all of them till you find either H/V keystone, or Quick corner.
If on Quick corner change it to H/V keystone. And make sure they are both at 0 the image should then be at its best quality. Like I said they was designed to be used with a wall mount from Epson to fine tune the image. So you’ll need play around with a little to get the image straight without digital correction. Digital correction -= more pixels
Also make sure the projector is focused properly you’ll find the focus lever inside the filter cover unit near the projection lens.
You will also see two buttons on the front of your projector Wide and Tele. Make sure wide is fully towards wide. Again they’re designed to be fully adjusted with the mounts they come with digital correction of the imagine in anyway makes it more pixilated.
Hopefully this helps.