its the jigs to make spring loaded hooks, and then a jig to make bait holders.. you stuff the weighted wire cage with bait like dead fish, they nibble it then get bold and stag the hook, the hook is being compressed by the now bent spring loader (seen in first half) and ta-da, when they nibble it, the wire under tension pops free and ensures a positive hook engagement. It's wild how many people in the comments doubled down to claim this was a nonsensical video instead of just asking for more info.
i guess you don't understand the concept of creating jigs to have perpetual access to self made equipment for successful food harvesting. This was a masterclass that wizzed past you lol
For those of you that can't figure this one out... this is a fishing hack. And a hack to watch when you have absolutely nothing else to do. So it is actually a time hack.What some people might call a bore hack. In other words how to take junk and bore the hell outta the unsuspecting people. What a good little hack. I feel so much brighter now. I was lost, but now I feel so much more complete. Thanks so much for helping me waste my time.
its the jigs to make spring loaded hooks, and then a jig to make bait holders.. you stuff the weighted wire cage with bait like dead fish, they nibble it then get bold and stag the hook, the hook is being compressed by the now bent spring loader (seen in first half) and ta-da, when they nibble it, the wire under tension pops free and ensures a positive hook engagement. It's wild how many people in the comments doubled down to claim this was a nonsensical video instead of just asking for more info.
its the jigs to make spring loaded hooks, and then a jig to make bait holders.. you stuff the weighted wire cage with bait like dead fish, they nibble it then get bold and stag the hook, the hook is being compressed by the now bent spring loader (seen in first half) and ta-da, when they nibble it, the wire under tension pops free and ensures a positive hook engagement. It's wild how many people in the comments doubled down to claim this was a nonsensical video instead of just asking for more info.
its the jigs to make spring loaded hooks, and then a jig to make bait holders.. you stuff the weighted wire cage with bait like dead fish, they nibble it then get bold and stag the hook, the hook is being compressed by the now bent spring loader (seen in first half) and ta-da, when they nibble it, the wire under tension pops free and ensures a positive hook engagement. It's wild how many people in the comments doubled down to claim this was a nonsensical video instead of just asking for more info.
Obviously its a thing-a-min bob! You fish it with your whatchamacallit! He's gonna show us how to make the whatchamacallit next time in a 3 part series. Stay tuned
Ahhhh... the grin breaking out across my face... Ahaaa !! It's a wire bender... Mt genius.. brilliant 👏 👏. Well done ✔️ well thought out.. must be supremely satisfying, to make the tool n then using it to do jobs.. lol... i love doing stuff like that... Where there's a will, there's a way.. Really enjoy watching these videos. Liked n subbed.. 🙂
I liked the Hemo trick I can use that idea . I’m not sure what all was going on there but I have did similar things before . Really liked the idea on the wire bending with modified hemostats
I'm in the US and had no idea what was being built. Thankfully found in the comments "swim feeder" so I could find how this are used. Don't think legal in the US. I think maybe we have more fish available so catch something like carp is pretty easy with chumming.
@@vidacrazy There are 4 hacks in the video, in order they are: #1 through wire bending jig for lure making #2 wire twist tool for lures or even for tying shark hooks to wire #3 plastic feeder attractant - for like fishing for carp or to attract fish to your actual bait #4 metal feeder attractant - for like fishing for carp or to attract fish to your actual bait
I know a fisherman who connected a split ring and a gamakatsu hook on Craftsman 7/16 box end wrench and caught a king salmon and a halibut on it under a boat in AK 😂
AFW Tooth Proof Stainless Steel Wite leader material is awesome for wire fishing leaders and it’s cheap as hell. Like 5$ a package for 30 feet. Also you can bend perfect wraps by hand and break it off clean at the wrap knot with some practice. All you need is strong fingers and some attention to detail. I like the being pliers in the video. Having some of these would make building steel leaders much easier on my hands. 👍 I don’t want to sacrifice my good hemostats though.
Drill two small holes near each other in the top of a medicine bottle to fish a snap through. Then drill a bunch of small holes around the outside of the bottle. Throw a rock in the bottom for weight. Add the desired chum on top the rock in the container. Close the container. 20x cheaper 20x faster chum container. Used this trick many times
I have a Heart Surgeon friend he can get me a dozen Hemostats, I pour my own Bottom Bouncers, the wire bender bolt and Wire bender would be worth a few hours in the shop puttering
Phenomenal video *You're welcome to share my beers anytime. _**The bicycle spokes was a lovely touch, I don't think it was clearly indicated that was what they were (not that the source of the wire mattered much)
certainly knows what he’s doing making a swim feeder and obviously has a lot of time to make these things. The same thing in the tackle shop will probably cost about £1.50 so unfortunately the time and material and effort used to make it in the first place was just a waste for me …. each to their own but unfortunately, I will be going to the fishing tackle shop for mine .👍
I’d love to make the wire wrapping pliers out of hemostats but I don’t have want to sacrifice my good clips. 😂😂😂 maybe I’ll find an old pair or something. They look like they work so well. The leader I use is easy to had wrap the wire but it’s just a little hard on my fingers. Tooth Proof Steel Leader wire is a great inexpensive product for making steel leaders. It’s really cheap. You can also make leaders in the field of with no tools using it as long as you have strong fingers and are good at tinkering.
I made feeders like this about five years ago. Your work is very beautiful. But he makes a mistake. The mesh must be cut diagonally, then your cylinder will have even ends.
The entire point of a life hack is that its supposed to be a quick and simple solution to a minor problem. Not an hours long engineering project lmao wtf
These are carp fishing cage/swim feeders for pack baits. Instead of chumming with boiled feed corn or canned sweet corn, you make a pack bait and press it into the feeder. The pack bait slowly dissolves and falls apart and attracts the carp or catfish to the feeder. Your hook-bait is usually on a size 4 or 6 hook and within 3" to 4" from the feeder. You can find many different ways to rig your swim feeder to catch fish. I actually prefer to use spring feeders as the pack bait is pressed into and around the spring feeder, which allows the pack bait to slowly fall off the feeder and make a nice chum pile. The fish are attracted to the chum pile, and your hook-bait is in close proximity for the fish to find. I use a soured corn pack bait for channel catfish and a fresh corn pack bait for carp. The carp doesn't seem to like the soured corn pack bait as much, but the channel catfish loves it. You can put many different types of additives/flavorings in your pack bait to change the flavor profile. The flavorings I like to use are banana, strawberry, anise, tutti-frutti, and coffee. The number of available flavorings is almost endless. You can find many pack bait recipes on youtube and Google.
I mean thats cool, and if your into the making aspect...but i have yet to see a "life hack" that wasnt harder that just things the normal way...like going to the store...
Few people know about it , because there’s so many process just to make these , plus as many anglers are out there , not even 80% make there own stuffs 😂
Well done. If youve got the tools, and the supplies and an hour to kill after the chores are done this is time well spent. most people sit around drinking alcohol and wasting their lives watching others play sports. Ypu are spending your time wisely .
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
The longest most complicated hack in history!!!!!!!!
My brain is still smoking!!!!!! 🔥
its the jigs to make spring loaded hooks, and then a jig to make bait holders.. you stuff the weighted wire cage with bait like dead fish, they nibble it then get bold and stag the hook, the hook is being compressed by the now bent spring loader (seen in first half) and ta-da, when they nibble it, the wire under tension pops free and ensures a positive hook engagement. It's wild how many people in the comments doubled down to claim this was a nonsensical video instead of just asking for more info.
Lol... I'm the same.... It's like creating a life hack to avoid walking and building a car from scratch.
I've been fishing for 40 years and i have no idea what that thing is meant to be.....
Me neither !!
A cage feeder
@@Aleksitusasd doesn't help...
@@bikepacker9850 you stuff it with groundbait, sort of like what you would call chumming. To lure fish in and to have them bite your actual hook bait.
@@Aleksitusasd amazing how fishing is different from country to country. Thank for the reply.
What a long-ass drive to Pointlessville.
lol I kept skipping ahead thinking we would get to something, but alas here we are, laughing together at Pointlessville.
@@BullfighteRC im here with you to brotha shame
Excuse me where's the door
OMG, you aren't kidding.
9:43 of WTF?
Never has so much been destroyed to make so little.
FACTS!
i guess you don't understand the concept of creating jigs to have perpetual access to self made equipment for successful food harvesting. This was a masterclass that wizzed past you lol
For those of you that can't figure this one out... this is a fishing hack. And a hack to watch when you have absolutely nothing else to do. So it is actually a time hack.What some people might call a bore hack. In other words how to take junk and bore the hell outta the unsuspecting people.
What a good little hack. I feel so much brighter now.
I was lost, but now I feel so much more complete. Thanks so much for helping me waste my time.
Roaches crawling on the work bench was the most entertaining part of the video 😂
Vice was on a tree stump...probably outside... I don't think that was a roach playa
And when you are ready with this things, no Time left for Fishing
not to mention all the stuff you have to buy to make these. Just go buy one for petes sake.
I do this every time before I go fishing, sometimes I'll even do it on the boat. Amazing
thanks
That's nice. I just watched a 10min video and have no idea what that is
Few people know about them because it's ridiculous
What even is that thing at the end it looks like some sort of weighted basket, what's the purpose?!?
@@Gstar5150 Someone should make a video about it!
@@Gstar5150 Philistine! The purpose is to gain YT clicks!!
@@davidbroadfoot1864 LOL
@@robertherman1146 DOH !
It’s called I make cool shit for no purpose, but it’s a fishing hack for nothing.
its the jigs to make spring loaded hooks, and then a jig to make bait holders.. you stuff the weighted wire cage with bait like dead fish, they nibble it then get bold and stag the hook, the hook is being compressed by the now bent spring loader (seen in first half) and ta-da, when they nibble it, the wire under tension pops free and ensures a positive hook engagement. It's wild how many people in the comments doubled down to claim this was a nonsensical video instead of just asking for more info.
I never knew it was that easy!
LMFAO
Well I'll never get that wasted 9:42 back.
Reminds me of me trying to save a trip to Home Depot
I think someone enjoys playing with nuts and bolts more than they like fishing🤔
No, he is just plain nuts!
Totally agree 😂
@@jeffhoover2135I think mostly with his nuts!😂
its the jigs to make spring loaded hooks, and then a jig to make bait holders.. you stuff the weighted wire cage with bait like dead fish, they nibble it then get bold and stag the hook, the hook is being compressed by the now bent spring loader (seen in first half) and ta-da, when they nibble it, the wire under tension pops free and ensures a positive hook engagement. It's wild how many people in the comments doubled down to claim this was a nonsensical video instead of just asking for more info.
Meanwhile, the kids down at the pier in Puerto Vallarta are using a clorox bottle and a sparkplug...
lol
There's a reason few people know about it.
Yeah, looks like a pain-in-the-ass "hack" that only a dedicated machinist would attempt😮.
its the jigs to make spring loaded hooks, and then a jig to make bait holders.. you stuff the weighted wire cage with bait like dead fish, they nibble it then get bold and stag the hook, the hook is being compressed by the now bent spring loader (seen in first half) and ta-da, when they nibble it, the wire under tension pops free and ensures a positive hook engagement. It's wild how many people in the comments doubled down to claim this was a nonsensical video instead of just asking for more info.
I never go fishing without these! Great vid
Thanks you 😊😊😊
@@FISHINGknotsura he is sarcastics 😅😂
When one uses ones mind it's amazing what can be done. Very good skills at creating and thinking, enjoyed that a lot.
@paulppaulp7138 thanks
Please excuse my ignorance ….but what is it used for 🤷.
To catch birds
Doing what
Obviously its a thing-a-min bob! You fish it with your whatchamacallit! He's gonna show us how to make the whatchamacallit next time in a 3 part series. Stay tuned
Ahhhh... the grin breaking out across my face... Ahaaa !! It's a wire bender... Mt genius.. brilliant 👏 👏. Well done ✔️ well thought out.. must be supremely satisfying, to make the tool n then using it to do jobs.. lol... i love doing stuff like that... Where there's a will, there's a way.. Really enjoy watching these videos. Liked n subbed.. 🙂
Brilliant and easy wire bender, well done!
But what is it????
i have no idea what this guy is building. where is final result. How is it used???????
Click bait!
I never made it to the end. But I assume it was another Elon Musk rocket
lmao
😂😂😂
Hahaha 😂
No... Rick Astley jumped out and started singing "Never gonna give you up"
When you used the drill bit for a center punch, that was enough for me ! AND you posted it !
I liked the Hemo trick I can use that idea . I’m not sure what all was going on there but I have did similar things before . Really liked the idea on the wire bending with modified hemostats
I'm in the US and had no idea what was being built. Thankfully found in the comments "swim feeder" so I could find how this are used. Don't think legal in the US. I think maybe we have more fish available so catch something like carp is pretty easy with chumming.
I agree 100%,
I'm from Florida, and I've fished my whole life. I've no clue what he was making.
It depends on your state weather you can chum for fish or not. A swim feeder is just the same thing as chumming. It’s a common European technique.
Genius. Super talented. Great job. Thank you for the video
Thank you
I've been fishing for 68 years and I don't have a clue what I just watched. I think this life hack is better suited for "how to kill time".
I'll just pop out to my shed and knock that out right away! Lol!
I had no idea where the heck you were going with this creation and then my jaw dropped...PURE GENIUS!!
Thanks you
What is it?
@@vidacrazy There are 4 hacks in the video, in order they are:
#1 through wire bending jig for lure making
#2 wire twist tool for lures or even for tying shark hooks to wire
#3 plastic feeder attractant - for like fishing for carp or to attract fish to your actual bait
#4 metal feeder attractant - for like fishing for carp or to attract fish to your actual bait
Very crafty ideas 👍
Is there a part 3 & 4 too this
Or did i just miss part 1.
I like the idea for making wire forms.
wow many times saw this things, never knew how it's done. thanks a lot!
@@golden_smiles thanks
I’d like my 9:43 back please.
I second that
It is a catfish dough holder or a minnow weight?
Wire tie tool is awesome! Imma do that and save my poor old fingers!
By the time you have bought the tools for these ‘ideas’ you could have bought more than a lifetimes supply of swimfeeders.
Yup, life drain
Some people enjoy the art of creating things
Way 2 much time on your hands
I'm pretty positive Hobby Lobby has all these tools for jewelry making for less than $4 a piece!
The same could be said about courting women vs just buying a life like doll. 😂
hey your feed baskets turned out well.nice
Классная штуковина для загиба!!!
и кормушка норм .щипцы жалко.
Great video dude 👍🏻 👌🏽 keep up the good content!!
I'd be so pissed if I lost this on a snag after all this work...
I'd keep it safe in my tackle box 😆
I made my own fishing lure once, almost lost it in the weeds, and haven’t taken it out of the tacklebox since 😂
Saw a great one made from chopped tea spoon ..brilliant little thing.
I know a fisherman who connected a split ring and a gamakatsu hook on Craftsman 7/16 box end wrench and caught a king salmon and a halibut on it under a boat in AK 😂
AFW Tooth Proof Stainless Steel Wite leader material is awesome for wire fishing leaders and it’s cheap as hell. Like 5$ a package for 30 feet. Also you can bend perfect wraps by hand and break it off clean at the wrap knot with some practice. All you need is strong fingers and some attention to detail. I like the being pliers in the video. Having some of these would make building steel leaders much easier on my hands. 👍 I don’t want to sacrifice my good hemostats though.
Drill two small holes near each other in the top of a medicine bottle to fish a snap through. Then drill a bunch of small holes around the outside of the bottle. Throw a rock in the bottom for weight. Add the desired chum on top the rock in the container. Close the container. 20x cheaper 20x faster chum container. Used this trick many times
The music was comforting my blood pressure dropped but a bit stressed as it dragged on.
Cool, but what the last thing u made called at the end of the video
By the time this video ended I was out of the store with a bag full of brand new fishing gear.
Sinceramente, não entendi, qual a serventia?
O resultado é incompreensível.
Если ты не рыбак тогда непаймеш
Wrap a bit of lead around a hair curler, tie a swivel on it, and there u have your open end, or blocked end feeder.
Super ,juste une question quel est le diamètre des 2 rayons de vélo, merci
I have a Heart Surgeon friend he can get me a dozen Hemostats, I pour my own Bottom Bouncers, the wire bender bolt and Wire bender would be worth a few hours in the shop puttering
Phenomenal video *You're welcome to share my beers anytime. _**The bicycle spokes was a lovely touch, I don't think it was clearly indicated that was what they were (not that the source of the wire mattered much)
Good thing I fast forwarded through it.
certainly knows what he’s doing making a swim feeder and obviously has a lot of time to make these things. The same thing in the tackle shop will probably cost about £1.50 so unfortunately the time and material and effort used to make it in the first place was just a waste for me ….
each to their own but unfortunately, I will be going to the fishing tackle shop for mine .👍
God given creative Mind!, Good on ya!
Absolute 100% pure madness.
@@eamonnbrown7877 thanks
Wow.....there's almost 10 mins of my life I can't get back.. sometimes one has to go to end to realize why they never should have.. I kill me
I’d love to make the wire wrapping pliers out of hemostats but I don’t have want to sacrifice my good clips. 😂😂😂 maybe I’ll find an old pair or something. They look like they work so well. The leader I use is easy to had wrap the wire but it’s just a little hard on my fingers. Tooth Proof Steel Leader wire is a great inexpensive product for making steel leaders. It’s really cheap. You can also make leaders in the field of with no tools using it as long as you have strong fingers and are good at tinkering.
nicely made swim-feeder mate, ignore the ignorance,
This cat is on a sick one
Amazing and creative ideas.
Thanks you
I might make 5 or 6 of these today!😂
So THAT’S how a Flux Capacitor is made!
У тебя золотые руки и светлая голова 😮
I hope every fisherman has those tools omg.
I want my 10 minutes back!
It’s the fishing hack that gets suckers hooked into looking at it. That’s the point of this guys channel.
That’s Cool! but doing all of that when will I get to fish man!🤷🏾♂️🤣🤣🤣
Excellent holder for a week's supply of relative bearing grease.
You made more on this video than I'll ever save cutting up tools. But hey, I must be a dummy . . .
Imagine spending weeks designing and working on this then calling it a hack to save 5 dollars
Probably lost it on the first cast too.
Save 5 dollars on what? Wth is it?
W T F !🤔
Crap ! Felt like I just come out from one of my college classes years ago. Felt that ole brain pain !
There’s 10 minutes of my life I’ll never get back
How much weights your feeder-tool ???
Remember kids, cut away from yourself
Nice 💖
I made feeders like this about five years ago. Your work is very beautiful. But he makes a mistake. The mesh must be cut diagonally, then your cylinder will have even ends.
It’s amazing what you can make with a blue print of the hoover dam 🤐
Piece of cake! Only took 13 days... to watch the full video
The entire point of a life hack is that its supposed to be a quick and simple solution to a minor problem. Not an hours long engineering project lmao wtf
I'm an avid fisherman and I can honestly say I have no idea what the hell this guy is doing 😂 I am 90% through the video and still have no idea
I dont even know what you made but i watched til the end.
Me too.
These are carp fishing cage/swim feeders for pack baits. Instead of chumming with boiled feed corn or canned sweet corn, you make a pack bait and press it into the feeder.
The pack bait slowly dissolves and falls apart and attracts the carp or catfish to the feeder.
Your hook-bait is usually on a size 4 or 6 hook and within 3" to 4" from the feeder. You can find many different ways to rig your swim feeder to catch fish.
I actually prefer to use spring feeders as the pack bait is pressed into and around the spring feeder, which allows the pack bait to slowly fall off the feeder and make a nice chum pile. The fish are attracted to the chum pile, and your hook-bait is in close proximity for the fish to find.
I use a soured corn pack bait for channel catfish and a fresh corn pack bait for carp. The carp doesn't seem to like the soured corn pack bait as much, but the channel catfish loves it.
You can put many different types of additives/flavorings in your pack bait to change the flavor profile. The flavorings I like to use are banana, strawberry, anise, tutti-frutti, and coffee. The number of available flavorings is almost endless. You can find many pack bait recipes on youtube and Google.
@@DWeezy62 thank you. I still can't visualise how they work. Are they attached to the cage?
@@DWeezy62 ok. I just watched a RUclips video. Thanks again
@troubledspirit3328 No problem. Give them a try. They are a great way to catch carp and channel catfish. Tight lines!
So this is to waste a day that you could have been fishing.😂
Rainy day .
Or happily retired in be tween NAPS 👍
I already wrapped 1078 hooks with sardines and thread in the first 2 minutes
Please let me know where I can buy those scissors
What is that tool you used to twist the wire
I mean thats cool, and if your into the making aspect...but i have yet to see a "life hack" that wasnt harder that just things the normal way...like going to the store...
What kind of marker is that?
1.2 million men used this video to justify spending $20 on a lure to their wife 😂 bros out here doing gods work
Great video
Few people know about it , because there’s so many process just to make these , plus as many anglers are out there , not even 80% make there own stuffs 😂
Well done. If youve got the tools, and the supplies and an hour to kill after the chores are done this is time well spent. most people sit around drinking alcohol and wasting their lives watching others play sports. Ypu are spending your time wisely .
Thanks you 😁😁😁
Very good reason nobody knows about this.
I wasted 10 minutes of life watching this. I feel I should be paid emotional damages 😭😢
You are awarded no points, and may God have mercy on your sole.
Oh wow!
A mousetrap?
A berley cage? All that for a berley cage. Jaysus.
جميل جداً أحسنت يا صديقي
I have caught 8 fish during this video...😐 Ready to go home now...