How I Repaired My Sanitizer Spray Bottle & Fixed it Twice !!

[@adeley27]

Just put a needle through the hole where the little bead was. That is the end where the straw was attached. Test it out and see if it is started spraying. I did it and it worked out for me. Did not have to open the when thing. Thank you for the video 😊

[@ice._.gyal.]

Thank you so much... this way was so much easier and less complicated.

[@stoppablepham6334]

I tried this just now and it works for me too, thanks for the tip!

[@parul_s_panchal1553]

@Ad k it worked for me thanks for the tip 😊😊

[@yamunas609]

It worked for me too! thanks

[@allegrifan4933]

it works, thanks so much!!

[@bjthomas66]

I had never noticed the tiny ball! It was stuck, and even hot water didn't release it. But a shot of WD40 worked! Thank you for this video!

[@adeley27]

Thank you, because your comment I decided to stick a needle to loosen up the little bead, and it worked.

[@Ken_710]

THANKS A LOT MAN!
I WAS STRUGGLING WITH THE NOZZLE SETUP.
I HAVE NEVER FOUND A RUclips VIDEO THIS HELPFUL THIS WHOLE WEEK.

[@BabjiEManohar]

Glad it helped

[@hariharangopu513]

My friend, Mr. Raghavendra (Handsome guy) got an same issue. We saw your video luckily and we did dismantle and assembled all parts. Respect 100%. Mission passed 100%. LOL..Its working fine now..

[@hariharangopu513]

Thanks for Raghav hard work and love towards RUclips. 😍

[@joanna5200]

I didn't even have to take it apart to your extent and it worked like a dream again. Thank you so much ❤️🙏

[@loananzouakou4673]

how would you take it apart?

[@joanna5200]

@@loananzouakou4673 if you watch the whole video, she did show how x

[@shaymovieslol2748]

WOW! THIS WORKS, I THOUGHT I HAD TO BUY A NEW ONE BUT KNOWING ME I’D FIND A WAY TO FIX IT. IT SPRAYS MORE MIST NOW! I’M LIKING THIS VIDEO!

[@gaming30378]

Bt wht if it again don't work ??

[@amypola5903]

Seeing how the mechanism works was helpful. I can't take mine apart, the can is pressurized, and now I know the hollow tube that's broken on the outside, can't be pulled out from the outside and replaced. So I'm gonna have to Macgyver something to make it spray again. The can is 3/4 full!

[@paulnitarai9570]

Thanks it worked

[@dianegraves339]

Thank you for this video. My bottle got knocked off of the counter and landed right on the nozzle without the cap on, and it wouldn’t work. It saved me from having to buy another product when this bottle was already full.

[@pammclennan1642]

Thank you so much for this information. I didn't know you could take the whole nozzle apart and put it back together as you did. Very helpful.

[@BabjiEManohar]

Glad I could help!

[@mohammedsaleem6264]

Thankyou soooo much ❤️❤️❤️❤️❤️ i cried when i broke my mom's bottle but now she is not angry ❤️❤️❤️❤️

[@ankitakhurana9090]

I was about to throw away 2 bottles as the pump was not working, then found this video and yippee it worked.
It's such a helpful video 👍👍

[@shivaniverma4266]

This is insane I just lost that specifically shape transparent ball and find it and fixed that bottle thanx for uploading videos

[@BabjiEManohar]

Glad it's helping

[@farminglovers7866]

I also lost the small ball

[@hamsapriya6933]

Thank you so much for this lovely hack! I couldn't remove the pump system but tried blowing on either ends of the pump assuming an air blockage and hola it worked! Thank you thank you thank you so much and thank God for everything!! 😊👍🏼

[@gogos869]

I just took off the hose and added a drop silicone to the nozzle it is attached to. I just went ahead and did it to every bottle I have. It works! Yippee!

[@BabjiEManohar]

You are awesome 😎

[@1vivi]

you saved my life

[@djoy4ly]

Thank you for the very helpful video! I fixed the spray nozzle on my GLASS bottle! Yay!!!

[@hazelboyce7230]

My two nozzles does not have in that little ball and they won’t work at all. Liquid is being pulled up but it isn’t getting to the actual nozzle to spray out. Nice video though, it is the only one that gave me hope.😂

[@Thecutegirliee]

Same did it work in the end for you

[@YuunAya]

I was very happy I could find a tutorial like this! But unfortunately, it didn't work :( even using a plier I couldn't remove the nozzle... I'm definitely substituting my spray

[@shaik119]

Same

[@eggheadtwoSCM]

We got the exact same bottle this will 100% work

[@BabjiEManohar]

*Try to repair yourself first* , before buying new. It's plastic. Reuse. Save environment.
*Yes, removing nozzle is hard.* Removing it went off the camera frame. Use a plier.
Share & Save someone's life ❤️ only if you find it helpful.
Clearly, some of you facing hard time removing the nozzle. Please be careful with this part because if you remove it harshly, there could be a transparent Spherical Ball drops off the nozzle assembly.
If you lost the spherical ball, try any tiny round piece of pebble or ball bearings of more or less same size.

[@a.praneetha1501]

Thank you so much

[@alekhyaprabhala3984]

Make that missing part

[@jhunusahu8061]

If the ball is Missing then what to do pls make a video

[@b06cristobalchristianp.56]

Yes, I'm having a hard time on removing the nozzle and til now, I'm still there AHAHAHAHAHHA

[@aparnaarpitadash9716]

@@b06cristobalchristianp.56 Same

[@motivationaltech4540]

I fix my shoe spry bottel with the help of your instructions....
Thank u

[@BabjiEManohar]

That's great!

[@Rahulsharma0421]

Thankyou it's really work for me

[@BabjiEManohar]

Glad to hear that

[@CodingWithZartab]

I usually don't comment on anyone's video but i loved your video .. helped me a lot Thank you so much ❤️🙏

[@BabjiEManohar]

Thanks a lot

[@CodingWithZartab]

@@BabjiEManohar Welcome Buddy !

[@kaushiknaik4872]

Ahh 3:00 AM content 🙂

[@skullgammer6720]

Bhai thank you mummy ki chapal se bacha liyaa yrr bhai love you se tane❤️👍🏻

[@andymandy1975]

Bhai nozzle nikal hi nahi raha 😰😢😖😖

[@GeorgeTheIndianFarmer]

You have made a simple but useful Video on the subject. Also I like the animation as well. Good job. Keep it up.

[@BabjiEManohar]

Thank You 🙂

[@Pizza_eater001]

So glad that u made this video
Saved my day

[@banupriyaam-1325]

I broke my father's spray ,i see your video and fit them.thankyou

[@BabjiEManohar]

I'm happy for you 😊 well done ✅

[@AnimeToonZ2007]

Same here

[@pranavagnihotri7030]

Thanks for the information,maza a gaya bro, ab new bottle kharidna nahi padegi❤🎉

[@anitakeshav9273]

Thank you very much
By seeing your video I repaired my sanitizer spray bottle.

[@ashoksamurai6409]

It's working. Thanks much.

[@clairenime]

Will definitely try after school my conditioning bottle suddenly stopped spraying

[@jagritiverma9880]

The thing is i m unable to attach the pipe part in the main cap its so hard😐😢

[@janelle2591]

How to fix my spray bottle that gives out big drops instead of really small ones? I lost the small part that make the drops small. Please answer if you know what i mean

[@vivekjasrotia7247]

Wonderful, I did nothing jut remove the parts and cleaned it and it works .Thank you so much..

[@sijokxavier]

Wow. Kudos. I just was doing 1 step wrong again and again. Anyways thanks a ton. Superb

[@Alex-vl4gu]

Thanks for helping

[@mythily8103]

Really awesome video.. I never notice the tiny ball. When spray bottle stuck I removed all parts of spray bottle but I didn't notice the tiny ball.. I think I have lossed it..after fix all parts without tiny ball it's didn't spray..after saw ur video I noticed tiny ball is missing now I fix using another tiny ball in spray bottle now it's spraying.. Thank you for sharing this video

[@crazyboy-vb5hc]

Thanks bro my mother is so happy

[@crankyannanya]

Make the missing part

[@opotumon]

Superb. Thank you so much.

[@ishansharma4618]

That's hell lot of HELPFUL ❤️❤️ BIG THUMBS UP

[@dudss5178]

For me the cap would not spring back up no matter what I'd do.
In my case the plastic disk holding the whole assembly on top of the bottle became super soft (for some reason) and the whole thing just slipped through it.
Meaning when I pressed on the cap, the whole thing just came down and wouldn't go back up.
I took out the plastic disk with the hole in it, and cut out a similar disk from an old credit card, then with a drill and a knife I made a similar hole in it.
Pushed that janky disk with a lot of force back onto the nozzle assembly and when the bottle is screwed on, it actually holds it in place and the nozzle doesn't slip through.
Now the nozzle springs back up and its working again.

[@joealfonso4735]

It works ..thanks

[@Falconof96]

Mera to jo sahi tha wo bhi kharab kar diya jo kharab tha wo to kharab hi raha, but good video , i still enjoyed the process at 2:00am😜

[@amazing.creators]

Very very right👍

[@amazing.creators]

Same mere sath bhi hua h bro

[@xoxossz]

2.45 am 🤣

[@bluejeans712]

this was helpful...i found out my spray bottle doesn't have the black rubber but has a lock to keep the nozzle and spring in place....i had to remove it bcoz it was too thick that prevents the spray from sucking water... thanks !

[@harshitha8088]

Can u please explain wht to do, if that black rubber is not there

[@bluejeans712]

@@harshitha8088 my bottle has a different design, i did not have the black rubber but in its place is a lock(white in color)... if you need a black rubber you have to find a something to take its place.or maybe your bottle is like mine.. disassemble it and find eahc piece that matches the one in the video. i figured out i do not need the lock(black rubber) after all

[@reshmivishwanath5244]

@Manohar plz help me
I cannot remove the nozzle .please tell how to do it

[@andymandy1975]

Same even I'm unable to remove the nozzle

[@priyankaagrwal249]

Even I am unable to remove the nozzle...even in video it was skipped

[@priyankaagrwal249]

I wonder if comments are or not genuine

[@adansisters8396]

This was so easy and help full thanks

[@pishhh]

Can u pls tell me how to remove tht main part ..its so hard :(

[@user-qy7ep4on6g]

That's the task😭

[@shinygracesanamandra2681]

The pipe is falling into the bottle when i pump it it doesn't stay in place should i stick it with feviquick or what should I do please tell me

[@ajeetsharma6582]

Wah bhai wah moj kardi

[@BabjiEManohar]

I hope it's helpful

[@rizwanatyagi9964]

Thank you fir this video

[@ican384]

Easier way… fixed mine by removing the nozzle then the pipe, and then put the rest in hot water then it worked for me 🎉 pump it a couple times in the hot water good as new

[@geraldaguirre2025]

Ano po remedyo pag wla yung panang bola na tranparent.????

[@badisochkabadaprayas4880]

Thanks

[@sapnason3887]

Thank you

[@govindarao37]

Good it's very useful

[@sapnasingh1217]

i am not able to remove the parts

[@denab78]

Thank you this video.. totally fixed my new spray bottle which I broke😁

[@demonslove6965]

Amazing video really helpful...😍😘❤️

[@BabjiEManohar]

Glad it's helping

[@MohammedHisham737]

How the hell do I remove the set 😖 I even tried to get it out with a cutting pair 😩 still that was stuck tho. Plss help

[@vaishalimundhe1035]

Same with me

[@nusratvlog7975]

i just done it today....and it’s work....thanks

[@sai6750]

My head strong bottle wouldn't work despite my hardwork and time invested.

[@BabjiEManohar]

It's all right, buy a non spray bottle and use it...

[@sandipchaudhary7107]

Thank you so much it's really helpful ☺️

[@rahulppazhani4601]

Yes... It works... Thankyou

[@Tk_s_CHANNEL]

i cant fix that bottom to that pipe i triad so mamy times what i can do now??

[@comi.d7873]

It was a struggle to take it apart but after a few sore fingers later I managed to fix it. Thank you for this helpful video. I now got a working bottle and new knowledge

[@harshitmodgil9609]

Thankyou sir
It's working

[@sanjana8716]

Thankuhh somch ❤️ this video is very helpful 😉

[@kuleshwarsahu]

Thank you so much
Helped me a lot

[@rashmiranjandas4834]

Thanks 👍😊😊😊😊 i set up my sanitizer bottle

[@sh_ri_ni_th_i.]

Wow most wanted video thanks

[@prodiycrafts5514]

but if the end where pipe connect is broker or split if also doesn't wort in that case you have to seal that area .

[@vinodthecreator6827]

It gives some confidence because of own repair,may be it is small prob.thanku for this video.

[@versatile581]

I am unable to remove nozzle

[@isatousillah1622]

I tried it I did not even remove all is working now watch from The Gambia🇬🇲

[@RamJi-sm6mx]

Wow Thanks yrr

[@காங்கயம்தொகுதிBJP]

Thanks dude it helped me...👍👍👍

[@BabjiEManohar]

Glad it helped

[@AbdulRahman-ww7tw]

Oohooo. You skipped how to remove pumping part ..... Uff it's tooo much important... And now ... We are not do it 🙂

[@ayanprince4338]

Thanks brother...
It works

[@user-tk2ft8wf4y]

Thank you so much!

[@amanmehar05]

Thank you very much bro ❤🤩

[@tinkerbell5427]

how to fix Makeup fixer bottle please make a video on it

[@smritika3767]

Good job M!

[@BabjiEManohar]

Thank you B

[@VVS_Craftworks]

Thank you so much🤝

[@karuneshbaranwal]

Thanks
Edit: You are awesome.

[@nikunjpatil2074]

Thanks
I repaired without removing those parts !!

[@SoniSingh-lq2ud]

Can you please tell me how??

[@sai6750]

Tho sir , batao na

[@aahyuhrawh]

Is this a spray sanitizer bottle? I have same!

[@nausheenkhan1289]

Thanks for sharing 😊

[@vinaymishra6126]

My sanitizer spray bottle is not fixed, it looks like other bottles instead of the original ones.

[@KishnaRam-li2xe]

Till u said comment i stopped nd commented again let me start process❤

[@BabjiEManohar]

Kind of you! Hoping this video helped

[@lokpriypeeyush2369]

Very helpful
Thanks

[@rajdangi9629]

Really its works, thanku

[@shabanabegum8092]

Ya it's work thank you 👍

[@swarnalisaha1816]

thank you so much i just repaired one

[@rajalaxmidash2605]

How to removing the set up

[@megarajvembarasi5480]

Thank you it's working

[@BabjiEManohar]

You're welcome!

[@sindhubindu3191]

TQ for vedio

[@donnacochran6161]

Nice video

[@BabjiEManohar]

Thanks

[@durgacutey7387]

I have max 3 to 5 bottles but all have these problems... tnqsm for this video😊😊😊😊😊

[@t2tmedia933]

thnx it helped me a lot

[@donnacarraway9182]

Thank you!