Bonjour, je suis Français, j'ai un problème avec BLITZ BP elle est toute neuve elle a fonctionné 15 mn, quand j'appuie sur la gâchette rien se passe, je comprend pas la bouteille et à 200 bar pas de plomb bloqué. A tu une solution ? Sinon ta vidéo super !!!!!!!!!!👍
bonjour, je suis Français j'ai un problème avec blitz BP elle est toute neuve elle a fonctionné 15 mn et après pu rien j'appuie sur la gâchette rien se passe. Ta vidéo elle et super !!!!!!!!!
Well i mix Lucius grease will oil like for hair clippers more oil then grease so it's little runny i have a video of it already should be on the channel somewhere
How do you get the barrel shroud off the blitz to clean the barrel ? If you don't take the barrel shroud off how do you how do you feed the line down it to clean the barrel with patches ?
@@airpower7692.30 cal second Gen. I'm learning the inner workings of the gun in hopes of making it perform as it should. Your videos have been very VERY helpful, and I thank you for all you have put into helping people like me out.
@@airpower7692 What I am seeing is that lever that pushes the shiny pin with the small spring down through the cycle process is causing friction or binding which keeps the chamber from closing forward. It slides all the way just fine without the armature during disassembly. I polished the top of the armature lever with emory cloth and seemed to help, but still not closing the chamber...
I just got mine. Ran about 300 rounds so far. Seems to work flawlessly. I've heard stories of them not operating well, though. Watching this to see about cleaning/tear down. Can you use clp to clean lube it, I assume, like regular firearms?
Nice tutorial Roy. You are the man
awsome, this video adresses everyting about the blitz. Thx!
Nice video, good job Roy👍
Bonjour, je suis Français, j'ai un problème avec BLITZ BP elle est toute neuve elle a fonctionné 15 mn, quand j'appuie sur la gâchette rien se passe, je comprend pas la bouteille et à 200 bar pas de plomb bloqué. A tu une solution ? Sinon ta vidéo super !!!!!!!!!!👍
Man I appreciate you taking your time to do this but if you use a brass hammer driving your pins it would really make it a lot easier on you
I subscribed to your channel. Hope I don't have to get that deep into it but if so your detailed instruction on the Blitz will be very helpful.
Excellent 👌🪛
Podrías hacer un vídeo cambiando la aguja de un hatsan factor Sniper L 7'62mm o 6'35mm? gracias
Can you do a video on how to shorten the barrel?
I no longer own this air rifle so that's a no
need instruction on correcting leak in jet1 25 cal by Hatsan
Sorry I've not owned that one I've no idea about it
bonjour, je suis Français j'ai un problème avec blitz BP elle est toute neuve elle a fonctionné 15 mn et après pu rien j'appuie sur la gâchette rien se passe. Ta vidéo elle et super !!!!!!!!!
Can you put out a video on how to properly lube the gun. I can't find a video or manual on how to service the gun.
Well i mix Lucius grease will oil like for hair clippers more oil then grease so it's little runny i have a video of it already should be on the channel somewhere
Starts about 5:40
ruclips.net/video/9dJpT7h8KQQ/видео.html
All the pieces you see me put in are lightly greased
@@airpower7692 10 4 thank you sir
What do you use to clean/lubricate? I would think clp would be fine?
I use gun patches to clean with i don't use chemicals then i mix lithium grease with light oil like used in hair trimmers
I use silicone grease for orings
How do you get the barrel shroud off the blitz to clean the barrel ? If you don't take the barrel shroud off how do you how do you feed the line down it to clean the barrel with patches ?
ruclips.net/video/KOZU0IN24vI/видео.html
Sooner or later, *everyone* will have to get in there to fix *something.*
Where did you get the armorer's manual for the Blitz because your knowledge seems detailed.
Just taking this gun apart lot of times
ha, I stripped out those same screws.
The reliability of this gun sucks. Mine is a novelty item that has never operated properly.
Had this one 4 years still runs great
What cal you have?
@@airpower7692.30 cal second Gen. I'm learning the inner workings of the gun in hopes of making it perform as it should.
Your videos have been very VERY helpful, and I thank you for all you have put into helping people like me out.
@@airpower7692 What I am seeing is that lever that pushes the shiny pin with the small spring down through the cycle process is causing friction or binding which keeps the chamber from closing forward. It slides all the way just fine without the armature during disassembly.
I polished the top of the armature lever with emory cloth and seemed to help, but still not closing the chamber...
I just got mine. Ran about 300 rounds so far. Seems to work flawlessly. I've heard stories of them not operating well, though. Watching this to see about cleaning/tear down. Can you use clp to clean lube it, I assume, like regular firearms?
Blitzsmithing