Thank you so much! This seems more straightforward the other tutorials I have seen. I have been thinking of switching to AM32 for a while but the process seemed daunting. Will definitely give this a try.
After flashing the bootloader you can flash the AM32 firmware. To configure AM32 and upload firmware you can use the Multi_ESC config tool using Betaflight passthrough. Alternately you can use the Online-ESC Configurator to flash or change settings with any web browser that supports web serial. I will make a video on this topic later.
One thing I don't understand is do you need to connect the stm32 programmer to voltage somewhere, or just ground. I guess it's getting power from usb, and the esc from battery so no?
The programmer is not delivering the voltage (It's getting voltage from USB). Programmer connections are Clock, Data and Ground. That's why I advise to run the laptop from battery. Power to the ESC is provided by connecting the lipo. To be a bit more safe use a smoke stopper or a fuse like I do in the video.
Hi, can you add links for Keil V5?, seems to be only V6 version available. But i am not 100% sure what i have to use. Now BLHeli32 is dead, a lot of people will be interested in this video. I have a lot of HAKRC BLHeli_32 Bit 35A 2-5S ESC, in stuck on default firmware 32.6 without RPM Bi-Dshot What AM32 Firmware have you installed?
Thank you so much! This seems more straightforward the other tutorials I have seen. I have been thinking of switching to AM32 for a while but the process seemed daunting. Will definitely give this a try.
After flashing the bootloader you can flash the AM32 firmware. To configure AM32 and upload firmware you can use the Multi_ESC config tool using Betaflight passthrough. Alternately you can use the Online-ESC Configurator to flash or change settings with any web browser that supports web serial. I will make a video on this topic later.
Terimakasih ini mmg cara yg paling mudah dipahami. Please tutor to crawler am32 from blheli32
Hi, Can i use this method to flash a bootloader to gigadevice GD32E230 mcu?
One thing I don't understand is do you need to connect the stm32 programmer to voltage somewhere, or just ground. I guess it's getting power from usb, and the esc from battery so no?
The programmer is not delivering the voltage (It's getting voltage from USB).
Programmer connections are Clock, Data and Ground. That's why I advise to run the laptop from battery.
Power to the ESC is provided by connecting the lipo.
To be a bit more safe use a smoke stopper or a fuse like I do in the video.
And I bet the procedure is so much different for f051 that I'll never get it right, so I won't even try. Thanks anyway, hopefully I'll never need it.
Hi, can you add links for Keil V5?, seems to be only V6 version available. But i am not 100% sure what i have to use.
Now BLHeli32 is dead, a lot of people will be interested in this video.
I have a lot of HAKRC BLHeli_32 Bit 35A 2-5S ESC, in stuck on default firmware 32.6 without RPM Bi-Dshot
What AM32 Firmware have you installed?
MDK-ARM v5.xx is part of Keil MDK v6 on the official website. Installed Am32 version 2.12 last month.
cannot read RTE data
Try running Keil as administrator. Did you install the ArteryTek programming algorithm pack file?
@@wallieonline ok.