Part 10 / 8th scale 3d printed supra with 2 cylinder engine project / Scale Addiction

Get $5 of NEW USER FREE CREDIT using PCBWay. Full feature custom PCB prototype services, PCB assembly, SMD stencils and CNC / 3D Printing: pcbway.com
join my patreon / scaleaddiction
STL File: cults3d.com/en/3d-model/game/...
Semto engine: bit.ly/4302Qcp?ref=53go405i
10% off Coupon Code: SCALEADDICTION
This is not the complete file, i have to add other as im test fitting and showing on my videos
started a new project, this 8th scale 3d printed supra with 2 cylinder engine will have adjustable Hight, real engine, gas tank, manual transmission
in todays video i will show the chassis parts and some panels, assembling
🔔 Hit the bell next to Subscribe so you don't miss a video!
Help the channel: paypal.me/alihoshyar89
Get all my files www.patreon.com/Scaleaddiction
We can be best friends
-------------------------------------------
/ scale_addiction
/ scaleaddiction
**If the video was fun, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos

[@monstertrucker35]

I think what’s most astounding about this entire build, is the fact that you were able to make it happen in SketchUp. The only thing I was able to create in that program in the 10+ years I used it, was problems.

[@jellyman140]

These updates cannot come fast enough. I can't wait to see it run! Good luck!

[@scaleaddiction]

Thanks, I do my best to update you all

[@davepriddy9263]

I have very much enjoyed following your progress on your Supra. Very impressive and can't wait to see the finished car. Keep up the good work.

[@Beemer889]

The tiny jack stands 😂😂😂 that thing is way too cool sir!

[@scaleaddiction]

Thanks 😅🙏

[@billjonesnation]

Incredible design/work. Keep it up!

[@And0idniK]

It looks incredible

[@scaleaddiction]

Thanks

[@ThreeDPrintDesigns]

Whoa... this is absolutely wicked!!!

[@scaleaddiction]

Thanks

[@ethrrr]

Poor diagonal cutters :))) You could use some solder at the end of that steel wire, to make it less fuzzy and sharp. Cool project!

[@hafidzzulkarnain9686]

i can't wait to see it running tho.We need it fast🔥🔥

[@scaleaddiction]

Thanks, soon

[@amicorum1amicorum-main62]

It’s interesting project keep making 😍

[@7Mindovermatter1]

This is a slick project

[@scaleaddiction]

Thanks

[@StrangersSSXK]

Awesome

[@scaleaddiction]

Thanks

[@RickyArdiawan]

I see on Facebook then i go here, keren parah🔥🔥

[@scaleaddiction]

Welcome on board

[@magat2ud]

It's so hard to wait so long for next video please upload soon🤧

[@scaleaddiction]

I'm working on it all the time, 😅 it takes tome really

[@julianorozco761]

Excelente video mi Amigo me gusta como se ve el chasisi del auto muy realista ❤❤❤

[@scaleaddiction]

Gracias por ver amigo

[@pandemiofpv]

muy mmuy bueno loco ! genius

[@scaleaddiction]

Gracias por ver

[@ray-charc3131]

This is very good. But as it runs in gas engine, the impact force during collision is great, metal frames are more appropriate, or the longitudinal pieces need to be at least. I remember that, when I was young 40 yrs ago, I implemented front wheel drum brake on a 1/10 gasoline off-road car, but, as the tire width was thin and car weight was light, the dragging force effect on the ground was not great. When I grew up 20yrs ago, there was 3d printing, but it's not as popular as today, I used my working company's one; an industrial SLS type to print parts for my design SUV R/C car as for my leisure fun toy use. It's an electrical motor operated some diy designed 4 speed gear shift one. I did less on gasoline engine R/C car, you are good and suceed to build it, it is more realistic than electric type. You done a smooth surface modeling in car body. Nowadays, it can be done easier as seen the type of better software you used. Back in that year, I used ProE's Pro-surface, it was a parametric one, it was much difficult to use and the outcome was not so good

[@fabulousfabrications1985]

You need steel roll cage with hand made fibre glass body panels and brass sub frame for front middle and rear with 30 % nitro methane for full power at around 45000 rpm and between 6 to 8 thousand rpm to the wheels with a custom high rpm friction clutch ,, I’m just saying I kinda know first hand

[@Ghostworks999]

I tried finding those disk breaks on Ali express like you said but I haven’t been able to find anything

[@Lynlimer]

Love it!
Cant wait to see it run!
For the brake wires, maybe you could put a screw with nut throug the brake wire hole. drill a hole in the screw head(sockethead). and put the wire throu the head. then thay are induvidually adjustable.
Do you think it will handle the torque, or are you planning to drive it carefully?
Can you turn down your music? I manually controll the volume to switch between too hear what you say, or quickly turn down the volume so i dont wake up the hole house

[@scaleaddiction]

The brake works good so far, I will have to test it with engine to know that, sorry about the music, it was low, but after render, it came out high, next time will be better

[@Lynlimer]

@@scaleaddiction Nice, looking forward to next video :)

[@ksh-gg]

매우정밀하지 못하면 각 바퀴에 가해지는 힘의 크기가달라질수 있습니다.

[@dimasaryo6802]

Kerangka nya dari metal juga dong, part lain nya sudah keren, tapi masak kerangkanya dari plastik

[@ajahniepemberton1860]

Can you please update the component list it is inaccurate, outdated and Missing a lot of the newer stuff

[@scaleaddiction]

Only the brake us out of stock on aliexpress, but you can find it on ebay, what else you can't find ?

[@ajahniepemberton1860]

@@scaleaddiction my issue isn’t what’s out of stock my issue is that the parts list on a cult 3-D hasn’t been updated in almost a month or so so stuff like the manual transmission and the correct driveshaft and also missing and the bearing that’s all I can remember off the top of my head

[@ajahniepemberton1860]

all I need at the moment is the manual transmission and the length of the dog bones used in the video @@scaleaddiction

[@orange_tweleve]

​@ajahniepemberton1860 I would recommend waiting for the transmission and clutch stuff. Rn the clutch is mounted to the body while pushing into the engine causing the engine to be pushed on the mounts ebeyrtime you engage the clutch which is weird

[@ajahniepemberton1860]

I am doing a moded version of the files so I don't have a clutch or engine so I just want the tranny for the gear ratios @@orange_tweleve

[@piotrpaderewski299]

Grat project Man ! 😀Can I ask You , what Caine of infill and wall setting’s You used to print the chassis and this cage ? Its PLA ? Look pretty solid .

[@scaleaddiction]

I used 25% and 6 walls with 6mm nozzle, yes it's pla

[@piotrpaderewski299]

@@scaleaddiction With this 6 walls its strong enough ? What Caine of infill you used ? Im asking cause I am designing a 1:4,5 scale rock bouncer , also printed in 90% on printer but I am using ASA filament.

[@Sutanreyu]

Your printer has under-extrusion issues, but otherwise, nice build.

[@scaleaddiction]

I'm sick of these printers, I calibrate and made the flow %120, but still same

[@JC61990]

amazing build. keep this asmr, please remove the music.

[@scaleaddiction]

Thanks, will do!

[@MarcusKeeler]

Making a 3d printed car to show how you could save money - spends ridiculous money on Capo brake equipment

[@scaleaddiction]

It's not about saving money, it's about me how I want to make it, it always cost a lot and so much work, but I can't find this to buy