Autel IM608 & APB130 adapter reading MQB Dashboard

IM608 & APB130 adapter, reading a VW polo 2016 dashboard. Retrieving the data from chip and calculating the IMMO data. This was a dashboard sourced from eBay so no ECU data available for sync calculations.

[@crispenthunder9773]

Thank you! been waiting for this video, keep up the good work!

[@honestlocksmith5428]

FYI, that is the LIN bus you're communicating with. It is much cheaper and slower than CAN bus communications as it's fixed at a much lower rate. Generally it's used for less critical applications as it has one master device and the rest slaves.
There are more powerful dedicated tools for communications with this bus, but does require some additional skills to work with.
This copies the entire control units files and the immo data is extracted.

[@khalilaymen8882]

❤❤❤❤

[@myroad5469]

Hello can u tell me which dashboard and eeprom we can do with autel

[@danaothman1787]

Hi thanks for the video that u shared with us.. does apb130 supports xp400 only ? No xp400 pro

[@bobbaxter952]

Does vvdi2 handle the syncronise data thing the same,you have to send it to China?

[@iskooobydoo]

thanks for the vid. i was waiting for someone to actually show how to use the APB130. Although I thought once you get the CS code, that is all you need to program a key for all keys lost mqb?

[@hogiegilchrist5307]

Unfortunately if it's an All Keys Lost you will need the sync data as well. If it's just add a key then the data can be saved from the original key.

[@iskooobydoo]

@@hogiegilchrist5307 Can you do via OBD If you have a working key and just adding another key? No need to take out cluster?

[@hogiegilchrist5307]

@@iskooobydooYes if it's only add key VVDI2 I use and save sync data. No need to remove cluster for add key. This was for an AKL situation to show the adapter being used.

[@carlquays680]

👍

[@locksmithsandcarprofession2428]

Hi so if u buy the xhorse licence u can get pin code and do all keys lost mqb?

[@kyriakosmousoulides7004]

apb130 for lost key or you need also for add key job?

[@masteryt7870]

Y la segunda parte ???

[@tomking3942]

Where are you getting sync data from?

[@hogiegilchrist5307]

There are multiple vendors online. I use sync_calc. The sync data comes back in a few hours.

[@inagbihal8518]

@@hogiegilchrist5307 What does it cost please Hogie and how do you make contact/an account with them or alike? Do you use the xhorse xsmqb key?

[@PavLockLocksmith]

​@@hogiegilchrist5307how much they charging?

[@locksmithsandcarprofession2428]

Link please 🙏

[@abiesnaar2772]

Tell me so can Autel do everything on its own in-case of akl

[@hogiegilchrist5307]

No unfortunately not an on AKL situation. You will need the sync data for AKL.

[@intercle1980]

@@hogiegilchrist5307can you plz inform how/where to get sync data if all.
Thk u

[@hogiegilchrist5307]

@@intercle1980 Sync data is available from online sellers in AliExpress or on Facebooks forums MQBCAR is one of the sellers. I use [e-mail] for mine.

[@hogiegilchrist5307]

@@intercle1980 There are multiple vendors online. I use sync_calc. The sync data comes back in a few hours. [e-mail]

[@mohammedalbasher8738]

How can I get the file hex 32 ​@@hogiegilchrist5307