It exploded within 30 seconds... ($100+ Unboxing from TheCubicle!)
HTML-код
- Опубликовано: 27 янв 2022
- Huge unboxing including the Weilong Pyraminx, DLitwin Square-2 V2, Yuxin Little Magic Pyraminx, Mixup Cube and more!
Watch my livestreams here!: / cubemastertwitch
Sponsored by TheCubicle: www.thecubicle.com/
Use code "cm" for 5% off your order!
Music by Joakim Karud / joakimkarud 
Кино
6:06 I was considering getting that cube and I'm glad I saw this
If your curious now they have fixed the issue, the replacement core that they put in there was stronger than the other, and how they put the stronger one in instead of the he the clear
And it's still the best pyraminx in general
Impressive that you managed to break not one, but two cubes out of a whole unboxing!
No spolier remove it
@@saiyogesh7179 its your issue reading the comments before watching
@@patolol3091 actually it's not his fault. The only thing that puts him at fault is caring
@@klingenschmidt9261 well if you read the comments before watching then you agree do see spoilers so if he gets mad about it its his fault
@@patolol3091 on mobile comments are the first thing you see and it takes over the full screen. It's unavoidable
Square 2 would be a really interesting wca event
For sure! There are good reasons to not add it though, bad hardware, hard to scramble, and just variation of current event
@@CubeMasterYT I reckon that with better hardware it would be such a good event.
not really. too similar to squan
@@ButteryCubes it is just like 4*4. If 4*4 has a place then definitely sq1 will also have a place right. All cudes started with worse hardware. Remember a piping sq1 with each turn. We just need to all it and all will happen automatically
@@CubeMasterYT i mean they added 4bld and 5bld, so i dont see the issue. i dont think square 2 is unique enough to be an event tho, maybe a master pyraminx
I recently made an order from Thecubicle and within that order I bought the Calvin's Square-2 V2. I hope mine doesn't have that same screw/spring issue. Plus it'll be a super huge upgrade to my Handmade Square-2 that I made about 10 years ago. This was before the Square-2 was commercially available to buy.
Yeah I hope
The white core is more stable, I got the maglev and it automatically comes with the white core installed
I have the YuHu megaminx its very good. It just started getting into cubing and yuhu was my first megaminx but I cant imagine it getting much better except for maybe very top level solvers.
Wow, I thought cubing hardware has improved to stop breaking like that.
The core of the cube had a defect but it comes with a stronger replacement core.
I have the Adheron Lite cube, it's made by a Polish cube store and that's why it's my only lube
The Yuxin Little Magic M pyraminx (i believe its the one you got) still is the WR cube, Jasper Murray mains it and used it to break the WR average
I love lubest xmt 10. It is amazing lube for almost every cube. Great unboxing
agreed
I had the same thing happen, I got the mgc 4x4 and the center misaligned and now its broken.
Phil said in the cubicle unboxing video that the replacement core of the Moyu pyraminx is made out of stronger material so it’s harder to break, but yeah this is a super disappointing release, I hope they improve the quality control
Thanks, definitely sticking to the GAN Pyra
Don't, the weilong is better
noo the gan pyra sucks
@@bvcghh1684 yeah its infinitely better, especially after doing the steven's mod to it
I also used to watch redkb!! i always wanted a 3x3x5 after watching his vids! got one recently
my weilong pyraminx core split into four parts only after taking the cube out of the plastic
Bruh that cut. That's why I don't do risky stuff like cut huge amounts lol. Also the Maglev version of the weilong pyra is like way way way way WAY TOO FAST.
This is not related to the video but my ylm square 1 has the magnets in 1 corner that is not in the correct position (it is not clicking into place), do you know any solution for that? (I have try some ways to get it out but the hole for the magnets are too small)
The same thing happened with my Weilong Pyraminx!
The core was probably defective i have the maglev version and that didn’t happen.
Well now we know the moyo pyra minx does cut but in half
That explosion reminded me oh the guhong v4. Rip pyraminx
Lubest XMT 10 is the fastest lube I’ve ever tried. It makes most 3x3s uncontrollable, and it’s great for big cubes and square-1 if you don’t overlube. I set up my Volt v2M with XMT 10, and it’s pretty fast.
well, I guess you havent tried dnm LOL
@@fc3x336 I have. XMT 10 is faster and lasts longer than DNM.
@@OlgaFyodorova I can assure youn dnm is faster. it is a water based lube which speeds the cube up INSTANTLY. xmt is a silicone lube which requires break in but doesnt get as fast. xmt lasts longer for sure, but dnm is faster.
@@fc3x336 Have you personally tried both? I have.
@@OlgaFyodorova yea...I have tried both
You can hear the dryness in the first cube
Which pyraminx is better Bell v2 or YLM?
Can't wait for the 1x1 tutorial
It's such a shame with the Square-2 having a great piece mechanism that the terrible center/hardware design ruins it. I've tried swapping the hardware out of a YLM Square-1, swapping the spring and sanding some of the areas to make things fit better, but I still can't figure out a way to stop it from unscrewing itself. If you happen to figure out a way to fix it, definitely let me know!
(Side note, the actual turning quality does improve a ton with break-in and lube)
Hey, a reason I got this cube was because of your comment on Tingman saying it used a good mech, so thanks for indirectly letting me know! I magnetized the slice like a YLM and set it up and it's as lot better and doesn't pop, but unfortunately cornercutting is the exact same as the previous Square-2 (might need more sanding/mods). For me, the screw doesn't unscrew itself anymore, and all I did was replace the spring with a slightly compressed MGC spring and kept it at pretty tight tensions (at loose tensions they always unscrew). Maybe that helps!
The spring was broken btw
my Weilong was core stripped before I even opend the box
I saw the thumbnail and just thought "Yeah that's a WeiLong"
That is the glass core there should be a plastic one in the box
RIP i laughed so hard with the pyraminx that is so funny and painful at the same time
My square one looks a little weird… if you have whit on top, the gap for slice moves is on the right side. This wouldn’t be too bad, but it makes parity impossible to execute. Any tips what to do?
White top is something that I do, most cubers actually use Yellow/Black top so they don't have that issue. If you want to do white top like me, switch the blue and green cap and the cube's solved state should be white top. For square-1, always have the larger block on the E layer on the right.
dang you might be able to refund the moyu pyra possibly?
6:07 cuando pyraminx esta hecho por marca intocable
I think cubicle threw the package 😂😂😂
1:10 my xmt bottle is the same with u, is that the new design?
And that f****** hard to open, my cap bottle broke :((
Not sure, but I just pressed it a little and unscrewed it a lot and it eventually came off lol, better than being too loose and leaking though
I need help with Square 1 because I can do algs but they don't work plz help I want to know how to solve one
I recommend this tutorial! ruclips.net/video/IkmlMEHYyzI/видео.html All the algs should work fine, and there are not too many of them!
not me waiting for the pyra to break
6:49 "its not even a cube anymore"
bro it was a never a cube 😂😂😂
it's not a pyramid
Btw this happened to my friend the core it comes with is trash but u should replace the other core it comes with
It exploded 56 seconds after you opened the plastic
The howtocube is meilong non magnetic or the magnetic one?
Oh yeah non magnetic just saw lol
Im laughing so hard because you kept calling it a cube lmao
Title is mad relatable 😔
Can’t believe Pyraminx is considered a cube
6:50 It wasn't one anyway lol
Moyu maglev isn't bad
pov you put two comments on a video
A new cube broke in less than 20 second's
Cubers nightmare 6:05
Nice
Becouse Pyra is my main event this hurt my heart
😥
nice
6:51 It never was
My main pyraminx is kind of
good
But no magnets or ballbainers
_Expensive≠better_
Cheap=better
Lol rip Weilong pyra
O ye
Pro tip: corner cutting isn’t super important as long as the small cuts are good :)
You treated it to harsh
6:50 technically speaking it never was a cube. I have no idea why but when you call tetrahedrons and dodecahedrons “cubes”, it triggers me a little bit.
Fun fact, the qr code is a rickroll
F
its not even a cube anymore? it was never a cube to begin with lol
CHEERS✨!! You are late to the party - P R O M O S M !!
Haha wow
Looks defective