I have this same case too. Does it have a led on the bottom right side of the case??? I noticed something white that looks like an led. Still waiting on my psu so im unsure...
The Phanteks vertical bracket is actually really nice because it sets the GPU back from the glass. I also just paid for one for a build I'm working on and it was $43 with shipping. The fact that it's included here is suuuuch a good deal.
I have the regular P300 version of this case and it's been my favorite for a while. I like it because of its smaller size and the price you pay for it. It gets really tight up top and the basement is small, but I put in an SFX power supply which gave me more room in there.
I have this same case too. Does it have a led on the bottom right side of the case??? I noticed something white that looks like an led. Still waiting on my psu so im unsure
Quick question, so if I have to take out the hard-drive bracket to fit in the power supply, can I not have a hard-drive in this case? If I can have a hard-drive in this case, any recommendations on where to put it? Thank you!
Had the same question while building my PC, you have to take apart the hard drive case then put in the PSU. After installing the PSU reassemble the hard drive case and install your drives. It takes some work, but in the end it goes well :) Hope this helps even though it is a late reply.
you can find the pin headers in your motherboard manual, or if you have a newer motherboard there will most likely be an adapter that tells you the orientation and you can just plug it in. On the 2 pinned ones, the arrowed slot is the positive.
I love this case... i have a i910900k overclocked. Aio. I never thought this buile thermally was going to work in this case... i was wrong. Very good case for the pice
@@RJ.CreativeStudios you have 2 fans on the front of the case that its pulling or sending air to the radiator right? At least is what i see! Or you put the radiator working without fans? 🤨
His radiator is mounted inside the case, he mounted the 2 fans between the front of the case & the fascia / front panel of the case (since it's mesh) as intake (pulling air in).
The front panel just pulls off, put the fans on the outside, use the long screws that came with the AIO to go through the fans, through the case, into the radiator. Then snap the front mesh panel back on.@@popohim
@@jdtechgear ok thanks, I'll work it out when I get there and if I need an rgb controller I'll just get one. It looks like a pretty easy case to work with. Thanks for the the video. 👍🔥
I’m having a problem with installing 2x 140mm fans in the front as intakes inside the mesh part… these fans are supposed to fit but they wont let the part click into place
I wanna put rgb fans in, replacing the stock exhaust fan and adding 2 for the front. Is it difficult to install rgb fans? Would u suggest putting one on the top of the case too?
you definitively need atleast 1 Front intake more, better 2. See gamers nexus Review why. I recommend the Arctic Fans, they are cheap and surprisingly good, keeping up with fans twice their price. two P14 cost less than 20$.
The only problem is that a lot of people complain about music and can't focus on the narration. Especially for these types of videos I want to make it feel conversational.
7:49 min - I think, you should mount the two frontfans in the case. Seems to be enough space for it and then, they can take more air in the case. - Not excactly the same case here but you get the idea: ruclips.net/video/lG4L4IDrFd4/видео.html
I have the P300S and a 360 rad in mine. Fans are intended to be inside to allow for airflow in the open front cavity. But since this has a mesh front I cant imagine it matters. Because of the drive cage at the bottom I cannot put a fan inside, so my 3rd fan is mounted like yours on the outside (though I think I'm choking the airflow on the bottom of mine)
@@Jazzyyfn meh efficiency, not the best fan noise, not the best protections and temperature resistance, too short a warranty and most importantly its voltage regulation is terrible. i would never consider it.
I was just wondering how is it possible for someone to do a review or a build of a tower pc and not recognize what a usb 3 or 2 is... The usb is blue... How silly, I stopped looking at the video in the first few minutes.. there's everything on youtube. Do your homework.
No video next week as of yet, maybe by next weekend. Everyone enjoy the holiday/weekend! Have more exciting cases to build on soon 😁
Bro you should upload more often, your contents got huge potential and keep it up.
Keep up the good work!
I have this same case too. Does it have a led on the bottom right side of the case??? I noticed something white that looks like an led. Still waiting on my psu so im unsure...
Question... i have a p300. I9 10900k aio cooling it. 2080 supet oc... thing is roasting hot! Hows yours run?
Hype! I’m about to build my first pc with this case
Easy case to work with
Nice. I’m looking at building one but still just researching at the moment. How’d your build go?
@@iiAssassinXxii it went pretty well. I got it to turn on first try.
How do you like the case? Good airflow? Thinking about getting it for my build.
Same here!
The Phanteks vertical bracket is actually really nice because it sets the GPU back from the glass. I also just paid for one for a build I'm working on and it was $43 with shipping. The fact that it's included here is suuuuch a good deal.
I didn't get it with my case :(
@@AndyplaysToday that was 2 years ago they probably stopped doing it
@@SuixdeCity yes, my computer is long finished now.
Just got all my parts in finally can build my first pc - got this case too
thanks for the video, was installing a hard drive and didnt know how to take out the sleds until you showed it.
I have the regular P300 version of this case and it's been my favorite for a while. I like it because of its smaller size and the price you pay for it. It gets really tight up top and the basement is small, but I put in an SFX power supply which gave me more room in there.
Man can you help me pls 🙏🏻 how did you connect the case to your rgb headers of your motherboard 🙏🏻
Would like to know as well. I even bought an adapter but the side rgb don't work
BlizzTheOneAndOnly I found, you have to connect the sata cable of the case to the Psu
@@louislecouturier thank you for replying. I will try to do so 👌
@@BlizzTheOneAndOnly Tell me if it works ! if not send me a message on instagram (lecout_off) I'll be able to help you more precisely :)
Using this case for my first PC build. This video is super helpful!
Actually built a PC in this case this Thursday and it was great to build in 4.5/5
I have this same case too. Does it have a led on the bottom right side of the case??? I noticed something white that looks like an led. Still waiting on my psu so im unsure
What PSU did you add to it and can you not use any hdds with the case?
Where do all these cables go to? Case come without instructions
hey man love the content keep it up
Love it!
Quick and to the point.
Im gonna buy this one next time with my gtx 1050 ti, ryzen 5, 8gb ram, standard atx mobo, 600 watts psu.
just waiting for a gpu then im gonna build my first ever pc in this case!
2 years later using this video to help my friend build their first PC lol its been 5 hours
Thanks for this helped my build my pc for Christmas
@jonathan martin I don’t think so
the vertical gpu mount included actually has decent airflow
This case comes with a vertical gpu mount?
@@teddy9067 my p300a didn't come with a vertical gpu mount. The ones I did see are expensive. 😕
Could I build a ryzen 3700x stock cooler 2070 super in this case? (Stock cpu cooler, 2 fans front 2 fans back)
Quick question, so if I have to take out the hard-drive bracket to fit in the power supply, can I not have a hard-drive in this case? If I can have a hard-drive in this case, any recommendations on where to put it? Thank you!
Had the same question while building my PC, you have to take apart the hard drive case then put in the PSU. After installing the PSU reassemble the hard drive case and install your drives. It takes some work, but in the end it goes well :) Hope this helps even though it is a late reply.
Where do I connect the 3 tiny 2 headed wires that say hddled+, reset sw, and power sw
you can find the pin headers in your motherboard manual, or if you have a newer motherboard there will most likely be an adapter that tells you the orientation and you can just plug it in.
On the 2 pinned ones, the arrowed slot is the positive.
I love this case... i have a i910900k overclocked. Aio. I never thought this buile thermally was going to work in this case... i was wrong. Very good case for the pice
I just plopped a 3080 in the case as qell
love this vid, perfectly explained everything. what camera are you using? mic quality could've been louder
All studio equipment is listed in the description
um.. turn up your volume?
What did you do with the internal hard drive after removing it . Did you put it back or just not use a internal hard drive
Where is the usb wire that hooks to the motherboard? I can’t find it and I have the same case
Oh shit
Did you find it
have you find it?
So uuuhhh..what about now? Have you found it??
i don't think he found it guys
Only problem with this case is you have to remove the HDD brackets to fit the power supply cables
So u cant have a hdd?
@@Zombiecosa u still can
@@pororokun1597 how
@@chef_boosie just get a smaller PSU. I had a EVGA GQ in it but I down graded to a ECGA BQ which is smaller.
@@Zombiecosa yes just get a shorted length PSU.
you think this case is easy to clean the mesh front? and the back side would make the dust enter inside the case because its open?
What size aio was that? Did you need to modify the front mesh cover for it to fully lock in?
Do you needed to mod the front to put the fans there or you can just put them there ? Just bought the case and need to make some space for a rtx 3080
I noticed that you had a 240mm colling system right? But you put the fans outside the case and not inside? And was pulling out or in?
i dont think theres any fans on that radiator lolol
@@RJ.CreativeStudios you have 2 fans on the front of the case that its pulling or sending air to the radiator right? At least is what i see! Or you put the radiator working without fans? 🤨
His radiator is mounted inside the case, he mounted the 2 fans between the front of the case & the fascia / front panel of the case (since it's mesh) as intake (pulling air in).
@@TLM-Nathan how to mount like this… i am currently facing this problem
The front panel just pulls off, put the fans on the outside, use the long screws that came with the AIO to go through the fans, through the case, into the radiator. Then snap the front mesh panel back on.@@popohim
I'm building my pc in that case rn and i cannot find where to put the cable for the power on/off main button in my motherboard. please help
Hello, is it possible to install Arctic Liquid Freezer II - 280 in this case?
Is there any built in fans!?
In the Phanteks video, that "reset" button was supposed to be an rgb controller?
If memory serves me correctly, I believe so
@@jdtechgear ok thanks, I'll work it out when I get there and if I need an rgb controller I'll just get one. It looks like a pretty easy case to work with. Thanks for the the video. 👍🔥
really cool case....both meanings included
Love the video man but can I put a micro arx motherboard in this
THANK YOU SO MUCH
I’d love if they sold this front panel Separate so I could replace the one on my p300
They do sell it seperately
I’m having a problem with installing 2x 140mm fans in the front as intakes inside the mesh part… these fans are supposed to fit but they wont let the part click into place
The fans mount on the inside, I had that problem too xD
Did you have any issues with the included fan not functioning?
Somehow the motherboard magically appears in the case lol- what’s it built in?
had a stroke reading this comment
Did you add rgb into the case or is it already there
If you remove the HDD bracket, is it possible to install a fan in it?
I have this case but with the solid front panel does anyone know if i were to buy the mesh panel that it woukd fit?
The 600w evga power supply has problem in this case ??
u think a 4070ti can fit in this case?
My front panel is solid. Just has the 2 vents on the top and bottom. Would it be useless to add 2 fans to the front?
I would highly recommend adding fans to the front, you need airflow even if it doesn't seem like much
I wanna put rgb fans in, replacing the stock exhaust fan and adding 2 for the front. Is it difficult to install rgb fans? Would u suggest putting one on the top of the case too?
@jdtechgear
their no dust filters for the front is that correct?
Yes, but the p400a does have.
Love it! I use the P300S
great airflow?
@@ardaa2220 honestly I have no problems with it. I have a 360 rad in the front
@@JMAN5438212 oh good cause i was gonna get a h510 but apparently it is very bad. thanks
I wish it had an optical drive bay
Could I build a custom loop in it?
does the case come with the standoffs preinstalled?
Does this case have pre installed stand offs?
Yeah
seems like a nice case :)
does that mean iw ont be able to use a hdd?
Where do u put the hard drive
would a micro ATX motherboard work in this case?
Yes
what size mother board you need for that case?
It's compatible with ITX, micro-ATX, and ATX.
How do I take the tempered glass off?
Im only using the stock fan, cpu fan and gpu single fan.. is that good enough?
you definitively need atleast 1 Front intake more, better 2. See gamers nexus Review why. I recommend the Arctic Fans, they are cheap and surprisingly good, keeping up with fans twice their price. two P14 cost less than 20$.
SteveAkaGoatpile thanks bro
is the stock fan 3 pin or 4 pin
Do i need front fans for my pc. I wont get them for another 2 months.
You don't have to but to improve airflow if recommended it
I can’t get the back panel off can u help me?
where do i plug in the fan the case came with
can you add the hardrive later like does it fit?
x
Add some back ground music it will give you video a pop love you hard work 👍
The only problem is that a lot of people complain about music and can't focus on the narration. Especially for these types of videos I want to make it feel conversational.
I didnt get a gpu bracket in mine
7:49 min - I think, you should mount the two frontfans in the case. Seems to be enough space for it and then, they can take more air in the case. - Not excactly the same case here but you get the idea: ruclips.net/video/lG4L4IDrFd4/видео.html
I believe you can mount it either way, but yes it would be less restrictive. The cable cutouts are on the other side of the fan mounting wall tho
I have the P300S and a 360 rad in mine. Fans are intended to be inside to allow for airflow in the open front cavity. But since this has a mesh front I cant imagine it matters. Because of the drive cage at the bottom I cannot put a fan inside, so my 3rd fan is mounted like yours on the outside (though I think I'm choking the airflow on the bottom of mine)
how do you turn off the rbg on the side panel???
You can probably unplug it
Bruh mine didn't come with a gpu mount.
._. Mine didn't come with the vertical gpu.
His case & the bracket were sent to him from Phanteks specifically to review. He just didn't mention that.
would 2 140 noctua fans fit in the front?
Yes, 2x 120mm or 2x 140mm, so 140mm Noctua Fans should fit.
But I do recommend Arctic P14 140mm, as they are cheaper and almost just as quiet, they are even black, so not the ugly brown you get from noctua.
This or h510
Dad??!?!
No this is patrick.
goood I from Algria
I've heard people say that this case has terrible noise isolation, what is your opinion?
if you complain about noise just buy PWM fans and slow them down.
I run it it's fine. I have quiet fans and they were Arctic p12, super cheap and amazing
i dont know how to put the ssd in??????
Remove the bracket on the back, screw the ssd to the bracket, plug in the sata connections.
Will the corsair cv 550 psu fit?
Check on pc part picker
Its a trash psu don't buy it
@@miniweeddeerz1820 why
@@Jazzyyfn meh efficiency, not the best fan noise, not the best protections and temperature resistance, too short a warranty and most importantly its voltage regulation is terrible. i would never consider it.
@@miniweeddeerz1820 what should i buy instead that is 60$ and can power 1660 super ryzen 5 3600
I switched to this case from my NZXT s340 and let me tell, the P300A is an absolute nightmare to build in
Wait.. so you can't have any hard drives if you have an ATX PSU? That is so annoying.
ok, so I found out you can use an ATX PSU, you just need it to be smaller than 160 mm without having to remove the hdd cage.
@@dodobird6863 Ah okay thanks for that
@@dodobird6863 can I ask is that the length specification of the PSU, the less than 160mm? Thanks in advance
THE SCREWS WONT turn
I’m new to building pc’s, could someone please recommend me some budget parts for gaming?
So my tempered glass broke, can I replace itv
Call / eMail Phanteks.
@@TLM-Nathan haha thanks already did
radiators upside down.
good video. terrible focus
I was just wondering how is it possible for someone to do a review or a build of a tower pc and not recognize what a usb 3 or 2 is... The usb is blue... How silly, I stopped looking at the video in the first few minutes.. there's everything on youtube. Do your homework.
I liked but the likes were 666 so I didn't liked sorry. Likes now are 665
Does it support vertical mount?