Tim with Ace Appliance gave a great explanation & the reset instructions worked perfectly. The cycle finished & the blinking light is gone. Simple solution. Thank you for the peace of mind.
Annamaria Thank you for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. Please help us provide more videos to our site by posting ApplianceVideo.com on your RUclips, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks again your support. Matt, Ace Appliance service technician.
Worked like a charm! My wife had bent one of the clips that hold the element and it was stopping it from spinning. Bent it back and found another clip that came off. Fixed that too and ran diagnostic and it’s back to working .
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Jose Thanks for the positive comment. Hopefully we saved you some money. Please help us provide more videos to our site by posting ApplianceVideo.com on your RUclips, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks again your support. Matt, Ace Appliance service technician.
Thank you so much for the diagnosis instruction. Now it back working again. Before watching this video I tried to reset the dishwasher by disconnecting the power then back on but didn't work, the clean light was still blinking. Thank you again for the instruction.
Baijun Li Thanks for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. Please help us provide more videos to our site by subscribing to our RUclips page or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our factory authorized technician’s also daily provide free professional Repair Help to people like you to help solve their appliance problems. You also have the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email us if you have any other questions our videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.
I had this issue of the washer stuck in a blinking clean light, and no proceeding with wash or stopping, even after unplug/replug. My washer is exactly the same model as in the video. I could not see any problem with the heater. The sequence of buttons to reset the washer worked exactly as described, and the machine is now initiating a new cycle!! Thank you! A life saver! However, I jmagine there is an underlying problem that remains not addressed?
Hey I want to thank you for doing this video. It really helps. I did exactly what you said and was able to fix my frickin dish washer!!! 😂😂😂 I have arthritis and I need my washer to work. Thank you so much!!!
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thank you for your positive response, we are glad we could help. Please subscribe to our RUclips channel or donate $1.00 to our fan funding page to help us create more quality content. This is the only way we can continue to help thousands of people like you every month. Just click on the link below and go to our RUclips page and click on the BLUE support button on the right hand side of the page. Thanks in advance. ruclips.net/user/ApplianceVideos
This was super helpful for a 10 year old Maytag (Whirlpool) unit. Someone snagged one of the heating element wires during installation or removal and it unplugged from the element terminal. After reconnecting it and powering up the unit, I was getting the flashing Clean light. Checked element continuity, which was fine, and checked the float switch moved freely and clicked, then I put it into diagnostic mode as per this video. Once it completed the test cycle, the unit works perfectly, no blinking Clean light. Running a cycle with the sanitize rinse enabled right now to make sure element is working properly. Thanks!
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Awesome video! You totally saved my life by explaining how to get into diagnostic mode. I just hit "cancel/drain" as soon as all the LEDs lit up and my dishwasher went back to working just fine.
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
I finally got my whirlpool into diagnostic mode. It went on for over 4 hours, occasionally going into the rinse function for a minute and stopping for 20 minutes or longer. I ended up unplugging it and mopping up the water that never drained by completely deconstructing the inside. Jesus Christ! What a fuckin nightmare
Hello Tim, thanks for your helpful explanation. I did reset my blinking clean light on my appliance, obviously after preventive maintenance task. El Paso Texas.
Glad it helped. Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
I have an under the counter Whirlpool Dishwasher that was stuck in “Heated Dry” mode and the start button wasn’t functioning as usual. I allowed the heated dry cycle to finish then pressed the start button again with the door open and it reset so I was able to get it started again. Appreciate the comments and the video 👍
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page
Glad it was helpful! Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
I have a similar Whirlpool Quiet Partner IV. It runs past the time for a cycle. For ex a 82 min cycle, after 82 mins it gets stuck at 44 mins and stays indefinitely. It has also taken at times 20 minutes for the timer to go down 1 minute. Turbidity sensor and control board has been replaced but the problem is still not solved. Thoughts?
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thank you for these videos. I have this same dishwasher and can't read the label on the inside of the door to be able to order a new gasket. Can you tell me what the model number is on this machine. Thanks!!
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Great video - but…today the “sanitized” light started blinking on my Kenmore DW. Should I try the same thing? It washes fine and is steamy when through. The heating element has no burn spot but is pale gray in sections. Should I replace the element?
I decided that “running a diagnostic” means actually letting it run so when all the lights came on I closed the door and it started. It washed back and forth from Normal to Quick Wash. It all turned off in less than 15 minutes and no lights stayed lit. I take that as a good sign?
Thank you for your positive response, we are glad we could help. Please help us by subscribing to our RUclips channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your friends & family know how our FREE videos can help them. Or you can support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to post free videos and help over 1-million people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .
Thanks for your response, and we are glad we could help. Please help us by subscribing to our RUclips channel or post our website www.ApplianceVideo.com on your Facebook page.
Hi there, I have a quiet partner 1 whirlpool dishwashing machine, that ive had for many years and the clean light is blinking. How do.i stop the blinking green and reset the dishwasher? Thanks in advance Lori/Tom
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Excellent! Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thank you for your positive response, we are glad we could help. Please help us by subscribing to our RUclips channel or post our website www.ApplianceVideo.com on your Facebook page.
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
You're welcome! Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page
THANKS A BUNCH! I was aware of the RESET procedure but every time the dishwasher went thru cleaning it would return and I'd have to reset again. Well, THANKS to this video I immediately went and inspected the 'HEATING ELEMENT' and found that to be the problem.. I was just about to order the control panel… FOR NOTHING!! THANKS!!!!!!
Shedrick I am so glad you did not order the control panel as it was not refundable once it was installed. GOOD JOB. Thanks for your positive comment. Please help us provide more videos to our site by subscribing to our RUclips page or posting ApplianceVideo.com site on your Facebook or Twitter account. We also have our factory authorized technician’s email daily free professional advice to people like you to help solve their appliance problems. Thanks in advance for supporting us. Matt, Ace Appliance service technician.
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
circlet58 We like keeping wife's happy..lol Thanks for your positive comment. We are glad wecould help resolve your issue and hopefully saved you money. Please help us provide more videos to our site by subscribing to our RUclips page or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our factory authorized technician’s also daily provide free professional Repair Help to people like you to help solve their appliance problems. You also have the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email us if you have any other questions our videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.
+Trace Warnick Thanks for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. Please help us provide more videos to our site by subscribing to our RUclips page or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our factory authorized technician’s also daily provide free professional Repair Help to people like you to help solve their appliance problems. You also have the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email us if you have any other questions our videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.
Question: I replaced heating element (which was clearly bad) and plugged back in. Clean was still flashing pattern so I normal/heat cycled buttons. All leds are on and the clean is flashing very fast. LEDs won’t go out. There’s a pattern to the super fast flashes 6 short, 1 long.
Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
albert quinlan Thanks for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. Please help us provide more videos to our site by subscribing to our RUclips page or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our factory authorized technician’s also daily provide free professional Repair Help to people like you to help solve their appliance problems. You also have the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email us if you have any other questions our videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Hello, I have a maytag dishwasher that has all the buttons lights are ok however when I press start the start button starts blinking after two second from pressing it, I tried the reset you adviced in your video they all lit but still doesn't work, what would be its problem please ? thank you very much
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.
+scottsnewskirt Thanks for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. We have helped millions of people repair their own appliances so please help us produce more videos to our site by subscribing to our RUclips page, or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our factory authorized technician’s also daily provide free professional Repair Help to people like you to help solve their appliance problems. You also have the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email us if you have any other questions our videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
+Neil Craig Thanks for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. We have helped millions of people repair their own appliances so please help us produce more videos to our site by subscribing to our RUclips page, or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our factory authorized technician’s also daily provide free professional Repair Help to people like you to help solve their appliance problems. You also have the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email us if you have any other questions our videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Stacey All of our technicians are now answering questions daily on the ApplianceVideo.com website for anyone needing help. Just copy and paste this this question under REPAIR HELP, and one of our factory authorized technicians will answer any technical questions at absolutely no charge on your appliance issues. We also have over 2600 free repair videos to help with your appliance repair issues. Thanks for your support. Matt Ace Appliance factory service technician.
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thank you for your positive response, we are glad we could help. Please help us by subscribing to our RUclips channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your friends & family know how our FREE videos can help them. Or you can support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to post free videos and help over 1-million people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .
Hello, I tried but the clean light still blinks. It doesnt do the diagnostics, no lights light up and clean light just goes back to blinking. Any ideas?
Hi. My dishwasher went out in hurricane Irma and it has a blinking "Hi Temp wash" light. It is this dishwasher. I tried resetting and it is not doing anything. Am I doing something wrong? Can you help?
Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 6,000 common questions and answers that you can easily search through by your model number, appliance make, problem or error codes, and It’s completely free to search through our question & answer library. There is a very good chance you question is already answered there.
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 13,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
My heater has continuity through it. And I have done this reset to get my costumer to use it one. After looking over everything. The heater,drain pump, motor, thermal, door latch. Control board, float switch. I could not pinpoint anything that was going on. I came to the conclusion that is was the main control board. I installed it and that fixed it for a day but then the clean light blinking happened again. 🤷🤦♂️
I have this exact same washer. My Normal light stays flashing and nothing works. It won’t do anything. I’ve tried the “Heated/Normal” reset part and nothing. Even reset the breaker on it and nothing happens. Ideas?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 13,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
After I flipped the washing machine circuit breaker off and on again, the dishwasher reset itself - blinking lights and beeps went away and it went back to normal. Unplugging the machine did NOT work, fyi.👍
Pender RBLX I ended up finding the same dishwasher on the side of the road. The owners said it still worked perfectly that they just upgraded. Snagged it and swapped out the mother board and it works like it should!
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Hello, for technical questions we have a Repair Help section at this link www.appliancevideo.com/repair-help/ . There are over 6,000 answers and questions you can search through FREE to help you with your problem. Hope this helps
i tried this but how long show it take before i know if it will work. its showing a red light and a blue light on the front and says its on 1 hr wash or normal wash.
Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 4,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes, and It’s free to search through our question & answer library.
Great question, If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.
Wait so, if it's not element and the diagnostic relays a code sequence to the problem, how do I read the sequence? Is there a legend? The manual does include anything on blinking lights.
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 6-days A week Monday -Saturday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.
Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 6,000 common questions and answers that you can easily search through by your model number, appliance make, problem or error codes, and It’s completely free to search through our question & answer library. There is a very good chance you question is already answered there.
Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 4,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes, and It’s free to search through our question & answer library.
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 6-days A week Monday -Saturday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.
@@jimmyjamma82 thank you. I got it working but now it just stops half way through the cycle. Not really a big deal. I just "resume" a few times. Do I need a new control panel for that also? thanks, Mike
@@jimmyjamma82 Thank you for your time to reply and help. I figured it out. It was due to the power connection. But the dishwasher still stops after 10 minutes and has to be restarted. Beyond my expertise. Fuse?
The "D3" error code could mean you have one of three problems either with the heating element, thermostat, or control board. Does the heat cycle work in heat dry? Does the element get hot? If so, then that's working. Next you would check your hi-limit thermostat. If the thermostat is good,
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
f this did not work, take the dish washer panel off and use some (do not use WD40) CRC QD Electronic Cleaner (Wall Mart under $5.00) or any electrical contact cleaner. TURN OFFTHE POWER BEFORE STARTING THE REPAR !!!!!! This may work on your garage door, microwave (worked on all three for me )washer, dryer , computer and any other circuit board and electrical connections Your contacts on your circuit board and wires may be dirty. So don't be stingy (it will not hurt any of the electronics) soak the connections and boards. Have to do this with my microwave (if you boil a lot of water) and my garage door opener. Fixed my dishwasher today and they are all over 10 years old.
This worked the first time , here it is the third week and this reprogramming isn't working . It's 13 years old not going spend any money on one this old . Was told that they last 8 to 10 years , and all of them are made in China now . None of the lasting 15 too 20 years anymore . Sometimes. These videos are great , but not for this died one .
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page
None of these videos are even remotely helpful. My heated dry button won't stop blinking. I even replaced the control board. The instructions to reset are always the same. Or they somehow involve depressing the heated dry button to get it into diagnostic mode. If the heated dry button itself blinks, it's not gonna work. Please, if you know something, help. I can't afford a whirlpool technician
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
@@Appliancevideo Yeah that link just re-routed me to this same video because it was the only thing that came up under blinking heated dry button on whirlpool quiet partner 3
Tim with Ace Appliance gave a great explanation & the reset instructions worked perfectly. The cycle finished & the blinking light is gone. Simple solution. Thank you for the peace of mind.
Annamaria
Thank you for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. Please help us provide more videos to our site by posting ApplianceVideo.com on your RUclips, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks again your support. Matt, Ace Appliance service technician.
Worked like a charm! My wife had bent one of the clips that hold the element and it was stopping it from spinning. Bent it back and found another clip that came off. Fixed that too and ran diagnostic and it’s back to working .
I know this is an old video but thank you for putting this up
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Your instruction in the video are GREAT, Thank You very much. My dishwasher is working normally now.
Jose
Thanks for the positive comment. Hopefully we saved you some money. Please help us provide more videos to our site by posting ApplianceVideo.com on your RUclips, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks again your support. Matt, Ace Appliance service technician.
Thank you I tried to run a hot clean cycle and ended up with the blinking light. Glad I found this video. It’s running now❤.
Thank you so much for the diagnosis instruction. Now it back working again. Before watching this video I tried to reset the dishwasher by disconnecting the power then back on but didn't work, the clean light was still blinking. Thank you again for the instruction.
Baijun Li
Thanks for your positive comment. We are glad we
could help resolve your issue and hopefully saved you money. Please help us
provide more videos to our site by subscribing to our RUclips page or posting our
www.appliancevideo.com/ website on your Facebook or Twitter account. Our
factory authorized technician’s also daily provide free professional Repair
Help to people like you to help solve their appliance problems. You also have the option to email a factory
service technician with a question at www.appliancevideo.com/repair-help/ . If
you need of parts for your major appliance, we have over 5-million parts in
stock at savemoreonparts.com/ . Thanks
in advance for supporting us. So email us if you have any other questions our
videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.
I went out to the fuse box to try and reset it but then found this video. God bless this man.
I had this issue of the washer stuck in a blinking clean light, and no proceeding with wash or stopping, even after unplug/replug.
My washer is exactly the same model as in the video. I could not see any problem with the heater.
The sequence of buttons to reset the washer worked exactly as described, and the machine is now initiating a new cycle!!
Thank you! A life saver!
However, I jmagine there is an underlying problem that remains not addressed?
Hey I want to thank you for doing this video. It really helps. I did exactly what you said and was able to fix my frickin dish washer!!! 😂😂😂 I have arthritis and I need my washer to work. Thank you so much!!!
Thanks for your response, we are glad we could help. Our library
of over 5,700 videos are currently helping over 1.6 million people like you
every MONTH. Please help us by
subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook
page, Twitter, Instagram or any other social media sites. Your support will
help us keep producing more free quality videos.
Instructions were clear and worked to diagnose and reset. Better than other web hits as they gave wrong order of resetting error code.
Thank you for
your positive response, we are glad we could help. Please subscribe to our
RUclips channel or donate $1.00 to our fan funding page to help us create more
quality content. This is the only way we can continue to help thousands of
people like you every month. Just click on the link below and go to our RUclips
page and click on the BLUE support button on the right hand side of the page. Thanks
in advance. ruclips.net/user/ApplianceVideos
This was super helpful for a 10 year old Maytag (Whirlpool) unit. Someone snagged one of the heating element wires during installation or removal and it unplugged from the element terminal. After reconnecting it and powering up the unit, I was getting the flashing Clean light. Checked element continuity, which was fine, and checked the float switch moved freely and clicked, then I put it into diagnostic mode as per this video. Once it completed the test cycle, the unit works perfectly, no blinking Clean light. Running a cycle with the sanitize rinse enabled right now to make sure element is working properly. Thanks!
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thanks to this video, my dishwasher is working again, information very helpful and thanks God I found this video, exactly the same problem.
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thanks for the help!! So the heater is only needed to dry the dishes?
Thanks Tim. The diagnostic cycle got rid of the blinking light and the dishwasher is working again.
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Awesome video! You totally saved my life by explaining how to get into diagnostic mode. I just hit "cancel/drain" as soon as all the LEDs lit up and my dishwasher went back to working just fine.
Thanks for your response, we are glad we could help. Our library
of over 5,700 videos are currently helping over 1.6 million people like you
every MONTH. Please help us by
subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook
page, Twitter, Instagram or any other social media sites. Your support will
help us keep producing more free quality videos.
I finally got my whirlpool into diagnostic mode. It went on for over 4 hours, occasionally going into the rinse function for a minute and stopping for 20 minutes or longer. I ended up unplugging it and mopping up the water that never drained by completely deconstructing the inside. Jesus Christ! What a fuckin nightmare
Hello Tim, thanks for your helpful explanation. I did reset my blinking clean light on my appliance, obviously after preventive maintenance task. El Paso Texas.
Glad it helped. Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
I have an under the counter Whirlpool Dishwasher that was stuck in “Heated Dry” mode and the start button wasn’t functioning as usual.
I allowed the heated dry cycle to finish then pressed the start button again with the door open and it reset so I was able to get it started again. Appreciate the comments and the video 👍
I'm having this problem. I thank you for the helpful hints.
I have just subscribed in hopes of seeing more videos like this.
Thank you, for this tutorial.
Cleaned filters and now up and running and it 15 years old thank you
Thanks for your response, we are glad we could help. Our library
of over 5,700 videos are currently helping 1.6 million people like you every
MONTH. Please help us by subscribing to
our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook
page
Thank you so much for the helpful instruction.
Glad it was helpful! Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
You save my life thank you sir
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Omg , thank you , I was about to take it apart 😂
thank you so much for this video it really helped me out a lot.
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
I have a similar Whirlpool Quiet Partner IV. It runs past the time for a cycle. For ex a 82 min cycle, after 82 mins it gets stuck at 44 mins and stays indefinitely. It has also taken at times 20 minutes for the timer to go down 1 minute. Turbidity sensor and control board has been replaced but the problem is still not solved. Thoughts?
Thank you for posting this video Tim. It helped me tremendously.
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thank you for these videos. I have this same dishwasher and can't read the label on the inside of the door to be able to order a new gasket. Can you tell me what the model number is on this machine. Thanks!!
Thank you so so much!!!!!!!!!
it worked! after trouble shooting!
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thank you! I thought I had to get a new dishwasher!!
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Good info.
Thank you so very much for your help it did work thank you again.
Appreciate this video bro much love
Great video - but…today the “sanitized” light started blinking on my Kenmore DW. Should I try the same thing? It washes fine and is steamy when through. The heating element has no burn spot but is pale gray in sections. Should I replace the element?
I did the normal/heated dry process and they all lit up and then cancel turned them off. So if it come back on I should replace the heating element?
I decided that “running a diagnostic” means actually letting it run so when all the lights came on I closed the door and it started. It washed back and forth from Normal to Quick Wash. It all turned off in less than 15 minutes and no lights stayed lit. I take that as a good sign?
MAN I THOUGHT I BROKE IT OR SOMETHING!! ALL I DID WAS HIT THE SENSOR BUTTON..TY
That's awesome, thanks so much. That was super helpful
Thank you for your positive response, we are glad we could help. Please help us by
subscribing to our RUclips channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your
friends & family know how our FREE videos can help them. Or you can
support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to post free videos and help over 1-million people per month like you repair their
own appliances. We also have thousands of more quality videos on all major
appliances made by our factory trained technicians at www.ApplianceVideo.com .
wow thanks that really helped. Nice that they put up this information for us to fix it.
Could the repair guy explain why his pants were unzipped?
Thanks for your
response, and we are glad we could help. Please help us by subscribing to our
RUclips channel or post our website www.ApplianceVideo.com on your
Facebook page.
I just laughed so god damn hard
Thank you!!!
Hi there,
I have a quiet partner 1 whirlpool dishwashing machine, that ive had for many years and the clean light is blinking. How do.i stop the blinking green and reset the dishwasher?
Thanks in advance
Lori/Tom
Very helpful thank u
THIS WORKED!!
THANK YOU!!
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thank you it does help
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thank you
Thank youuu!! Worked great!
Thanks for the help.
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
THANK YOU SO MUCH FOR YOUR INFO
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Bingo - worked on the old girl, thanks for that.
Excellent! Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thank you so much . I tried it and it worked.
Thank you for
your positive response, we are glad we could help. Please help us by
subscribing to our RUclips channel or post our website www.ApplianceVideo.com on your Facebook page.
Thank you my machine is running again
It worked! Thank you
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thank you so much for this tip it worked
You're welcome! Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
THANKS TIM !!!
Thanks for your response, we are glad we could help. Our library
of over 5,700 videos are currently helping 1.6 million people like you every
MONTH. Please help us by subscribing to
our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook
page
THANKS A BUNCH! I was aware of the RESET procedure but every time the dishwasher went thru cleaning it would return and I'd have to reset again. Well, THANKS to this video I immediately went and inspected the 'HEATING ELEMENT' and found that to be the problem.. I was just about to order the control panel… FOR NOTHING!!
THANKS!!!!!!
Shedrick
I am so glad you did not order the control panel as it was not refundable once it was installed. GOOD JOB. Thanks for your positive comment. Please help us provide more videos to our site by subscribing to our RUclips page or posting ApplianceVideo.com site on your Facebook or Twitter account. We also have our factory authorized technician’s email daily free professional advice to people like you to help solve their appliance problems. Thanks in advance for supporting us. Matt, Ace Appliance service technician.
When pressing the normal-heated dry buttons, does the door have to be open or closed?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Thanks Tim, you guys just made my wife soooooooo happy and me to, worked like a charm...lol
circlet58 We like keeping wife's happy..lol Thanks for your positive comment. We are glad wecould help resolve your issue and hopefully saved you money. Please help us
provide more videos to our site by subscribing to our RUclips page or posting our
www.appliancevideo.com/ website on your Facebook or Twitter account. Our
factory authorized technician’s also daily provide free professional Repair
Help to people like you to help solve their appliance problems. You also have the option to email a factory
service technician with a question at www.appliancevideo.com/repair-help/ . If
you need of parts for your major appliance, we have over 5-million parts in
stock at savemoreonparts.com/ . Thanks
in advance for supporting us. So email us if you have any other questions our
videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.
Great help and great video! Thanks for your help!!
+Trace Warnick
Thanks for your positive comment. We are glad we
could help resolve your issue and hopefully saved you money. Please help us
provide more videos to our site by subscribing to our RUclips page or posting our
www.appliancevideo.com/ website on your Facebook or Twitter account. Our
factory authorized technician’s also daily provide free professional Repair
Help to people like you to help solve their appliance problems. You also have the option to email a factory
service technician with a question at www.appliancevideo.com/repair-help/ . If
you need of parts for your major appliance, we have over 5-million parts in
stock at savemoreonparts.com/ . Thanks
in advance for supporting us. So email us if you have any other questions our
videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.
Question: I replaced heating element (which was clearly bad) and plugged back in. Clean was still flashing pattern so I normal/heat cycled buttons. All leds are on and the clean is flashing very fast. LEDs won’t go out. There’s a pattern to the super fast flashes 6 short, 1 long.
Great question, if you have a
more technical question that our parts department cannot answer, our
technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours
7- days A week.
That Worked ! Thank u Sooo much kind Sir !
Thanks for your response, we are glad we could help. Our library
of over 5,700 videos are currently helping over 1.6 million people like you
every MONTH. Please help us by
subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook
page, Twitter, Instagram or any other social media sites. Your support will
help us keep producing more free quality videos.
Thank you much. Great tip!
albert quinlan
Thanks for your positive comment. We are glad we
could help resolve your issue and hopefully saved you money. Please help us
provide more videos to our site by subscribing to our RUclips page or posting our
www.appliancevideo.com/ website on your Facebook or Twitter account. Our
factory authorized technician’s also daily provide free professional Repair
Help to people like you to help solve their appliance problems. You also have the option to email a factory
service technician with a question at www.appliancevideo.com/repair-help/ . If
you need of parts for your major appliance, we have over 5-million parts in
stock at savemoreonparts.com/ . Thanks
in advance for supporting us. So email us if you have any other questions our
videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.
What are the other problems it could be? If you can please list what else to look for
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Hello, I have a maytag dishwasher that has all the buttons lights are ok however when I press start the start button starts blinking after two second from pressing it, I tried the reset you adviced in your video they all lit but still doesn't work, what would be its problem please ? thank you very much
Great question, if you have a
more technical question that our parts department cannot answer, you can search
our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours
7- days A week.
THANK YOU FOR THIS, GUYS
+scottsnewskirt
Thanks for your positive
comment. We are glad we could help resolve your issue and hopefully saved you
money. We have helped millions of people repair their own appliances so please
help us produce more videos to our site by subscribing to our RUclips page, or
posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our
factory authorized technician’s also daily provide free professional Repair
Help to people like you to help solve their appliance problems. You also have
the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major
appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email
us if you have any other questions our videos cannot resolve. Thanks for your
support in advance. Matt, Ace Appliance service technician.
How long does the diagnostic cycle take? Thanks!
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Thanks, great help.!
+Neil Craig
Thanks for your positive comment. We are glad we
could help resolve your issue and hopefully saved you money. We have helped
millions of people repair their own appliances so please help us produce more
videos to our site by subscribing to our RUclips page, or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our
factory authorized technician’s also daily provide free professional Repair
Help to people like you to help solve their appliance problems. You also have
the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major
appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email
us if you have any other questions our videos cannot resolve. Thanks for your
support in advance. Matt, Ace Appliance service technician.
How can u just use the dry heat option only and not having to do a full wash with it?? Need help. TIA
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
I have a maytag with a blinking start/resume light. is there a common fix for this?
Stacey
All of our technicians are now answering questions daily on the ApplianceVideo.com website for anyone needing help. Just copy and paste this this question under REPAIR HELP, and one of our factory authorized technicians will answer any technical questions at absolutely no charge on your appliance issues. We also have over 2600 free repair videos to help with your appliance repair issues. Thanks for your support. Matt Ace Appliance factory service technician.
I have the lock light on, I hit heat dry for 5 seconds and didn't work , I tried many buttons and combinations, no luck
Can you help???
Great help! Thanks a lot.
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Omg thank you!
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Trying to find out why the clean sanitizer light does not turn off at he end of cycle
My element is good?
good working!!
Thank you..
Thank you for
your positive response, we are glad we could help. Please help us by
subscribing to our RUclips channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your
friends & family know how our FREE videos can help them. Or you can
support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to
post free videos and help over 1-million people per month like you repair their
own appliances. We also have thousands of more quality videos on all major
appliances made by our factory trained technicians at www.ApplianceVideo.com .
Hello, I tried but the clean light still blinks. It doesnt do the diagnostics, no lights light up and clean light just goes back to blinking. Any ideas?
Hi. My dishwasher went out in hurricane Irma and it has a blinking "Hi Temp wash" light. It is this dishwasher. I tried resetting and it is not doing anything. Am I doing something wrong? Can you help?
Great question, you can call
our parts department at 1-800-830-5465 and they can give you help 6-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more
technical question that our parts department cannot answer, our technicians are
answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 6,000
common questions and answers that you can easily search through by your model
number, appliance make, problem or error codes, and It’s completely free to
search through our question & answer library. There is a very good chance
you question is already answered there.
thanks a lot.....
Your are very welcome.
What if my whirpool doesnt have individual buttons? mine has cycle function buttons. So one button moves thru the different options
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 13,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
My heater has continuity through it. And I have done this reset to get my costumer to use it one. After looking over everything. The heater,drain pump, motor, thermal, door latch. Control board, float switch. I could not pinpoint anything that was going on. I came to the conclusion that is was the main control board. I installed it and that fixed it for a day but then the clean light blinking happened again. 🤷🤦♂️
Mine is blinking but is not saying clean it goes from drying to 2-4-6 then it drains and won't wash , please help to reset it for me thank you
I have this exact same washer. My Normal light stays flashing and nothing works. It won’t do anything. I’ve tried the “Heated/Normal” reset part and nothing. Even reset the breaker on it and nothing happens. Ideas?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 13,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
After I flipped the washing machine circuit breaker off and on again, the dishwasher reset itself - blinking lights and beeps went away and it went back to normal. Unplugging the machine did NOT work, fyi.👍
Pender RBLX I ended up finding the same dishwasher on the side of the road. The owners said it still worked perfectly that they just upgraded. Snagged it and swapped out the mother board and it works like it should!
Omg thank u
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
My exact dishwasher has no light anymore ! With power on !
I have the same model but why does my unit not stop washing? It won't switch to HEAT DRY.
Hello, for
technical questions we have a Repair Help section at this link www.appliancevideo.com/repair-help/ . There are over 6,000 answers and questions you
can search through FREE to help you with your problem. Hope this helps
i tried this but how long show it take before i know if it will work. its showing a red light and a blue light on the front and says its on 1 hr wash or normal wash.
Great question, you can call our parts department at 1-800-830-5465 and they can give
you help 6-days A week Mon-Sat . If you have a more technical question that our
parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 4,000
common questions and answers that you can easily search through by your model
number, appliance make, and problem or error codes, and It’s free to search
through our question & answer library.
What do you do if it’s the San I rinse button that’s blinking?
Great question, If you have a
more technical question that our parts department cannot answer, our
technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 6-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.
I have the sock and scour light blinking
Wait so, if it's not element and the diagnostic relays a code sequence to the problem, how do I read the sequence? Is there a legend? The manual does include anything on blinking lights.
Great question, if you have a
more technical question that our parts department cannot answer, you can search
our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 6-days A week
Monday -Saturday, or search at www.SaveMoreOnParts.com 24 hours
7- days A week.
I have a WP quiet partner iii, and the glass express light blinks steady. Two dashes shown. Will not reset!
Great question, you can call
our parts department at 1-800-830-5465 and they can give you help 6-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more
technical question that our parts department cannot answer, our technicians are
answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 6,000
common questions and answers that you can easily search through by your model
number, appliance make, problem or error codes, and It’s completely free to
search through our question & answer library. There is a very good chance
you question is already answered there.
Dave did they give you an idea of what to fix. I have the same issue?
So what happens if I don't see any visual defects with the heating element?
Great question, you can call our parts department at 1-800-830-5465 and they can give
you help 6-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 4,000
common questions and answers that you can easily search through by your model
number, appliance make, and problem or error codes, and It’s free to search
through our question & answer library.
@@Appliancevideo good luck with that. I just called and was told "I don't know anything I just sell parts"
on the same dishwasher my normal cycle button will not stop blinking green.. what can I do
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
My normal light I flashing what should I do for that?
Great question, if you have a
more technical question that our parts department cannot answer, you can search
our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 6-days A week
Monday -Saturday, or search at www.SaveMoreOnParts.com 24 hours
7- days A week.
The light wash button is flashing green
What if none of my lights are blinking? None of the lights are on at all. thank you!
Most likely the control panel will need to be replaced. I've had to do that a couple of times with the same dishwasher.
@@jimmyjamma82 thank you. I got it working but now it just stops half way through the cycle. Not really a big deal. I just "resume" a few times. Do I need a new control panel for that also? thanks, Mike
@@shabo77 the controls still work but don't light up?
@@jimmyjamma82 Thank you for your time to reply and help. I figured it out. It was due to the power connection. But the dishwasher still stops after 10 minutes and has to be restarted. Beyond my expertise. Fuse?
@@shabo77 does the whole thing lose power or it just stops the cycle? If it's just the cycle it could be the control board
I get a d3 what dose that meen ??
The "D3" error code could mean you have one of three problems either with the heating element, thermostat, or control board.
Does the heat cycle work in heat dry? Does the element get hot? If so, then that's working. Next you would check your hi-limit thermostat. If the thermostat is good,
My dishwasher is not draining after running this steps
please help, my whirlpool dishwasher wont work, the clean cycle light keeps blinking
UUUHHHHHHHH, that's literally what this video is explaining
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
we have a GU2400XTB7
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
1:46
Now mines locked up
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
This did not work
f this did not work, take the dish washer panel off and use some (do not use WD40) CRC QD Electronic Cleaner (Wall Mart under $5.00) or any electrical contact cleaner. TURN OFFTHE POWER BEFORE STARTING THE REPAR !!!!!! This may work on your garage door, microwave (worked on all three for me )washer, dryer , computer and any other circuit board and electrical connections Your contacts on your circuit board and wires may be dirty. So don't be stingy (it will not hurt any of the electronics) soak the connections and boards. Have to do this with my microwave (if you boil a lot of water) and my garage door opener. Fixed my dishwasher today and they are all over 10 years old.
This worked the first time , here it is the third week and this reprogramming isn't working . It's 13 years old not going spend any money on one this old . Was told that they last 8 to 10 years , and all of them are made in China now . None of the lasting 15 too 20 years anymore . Sometimes. These videos are great , but not for this died one .
Thanks for your response, we are glad we could help. Our library
of over 5,700 videos are currently helping 1.6 million people like you every
MONTH. Please help us by subscribing to
our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook
page
None of these videos are even remotely helpful. My heated dry button won't stop blinking. I even replaced the control board. The instructions to reset are always the same. Or they somehow involve depressing the heated dry button to get it into diagnostic mode. If the heated dry button itself blinks, it's not gonna work. Please, if you know something, help. I can't afford a whirlpool technician
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
@@Appliancevideo Yeah that link just re-routed me to this same video because it was the only thing that came up under blinking heated dry button on whirlpool quiet partner 3