Haha, I totally get it! Ball bearings can be tricky to work with, especially when welding. What’s the most challenging thing you’ve welded in your experience?
Things I would've done differently. Use a mig welder 70/30 or 75/25 argon/CO2 mixed gas with flux core wire, allows for a lower amperage and more focused heat. Pressed the 3 mandrel bearings into a tube for sturdiness and to prevent galling. Grind the drive bolts smooth at slightly less width than the mandrel to prevent galling and as a guide for the workpiece. Honestly, welding the bearings is the least concern since it's low speed, low impact and relatively low load compared to what they're rated for. I just would've used non sealed bearings with a drop of gear oil in them. All that said, clever build.
Thanks for the detailed input! Using the right gas mix and improving bearing alignment can make a huge difference. It’s always great to learn from others’ experiences. What’s your next project going to be?
Soy de Barqto Venezuela. Lo que nunca habia visto es soldar rodamientos porque de una vez por su dureza se cristaliza el material y se rompe al menor golpe o esfuerzo posterior. Corrigeme si me equivoco.
Thanks! To mount it on your bike, you’ll need to use a ratchet system and attach it securely with welding or bolts. Have you done any DIY bike projects before?
Sure! Creating a DIY ratchet and bike chain setup can be a fun project. You'll need some basic metalworking tools like a welding machine and bike parts. Have you worked with metal before, or would you need some guidance to get started?
I see where you’re coming from! Sometimes, the tools are more interesting than the project itself. What kind of projects do you usually enjoy working on?
Very clever, gonna try this, thanks. From the FSM-Yap
Thank you! I’m glad you found it useful. Have fun trying it out, and let me know how it turns out!
Saludos aca de Guanajuato Mex
Muy buen dia e idea muy buena
I am 80, and I know one thing for sure: You DON"T weld ball bearings!
Haha, I totally get it! Ball bearings can be tricky to work with, especially when welding.
What’s the most challenging thing you’ve welded in your experience?
Ide yang bagus 👍
Glad you liked it! Sometimes simple ideas lead to great results.
What’s the best idea you’ve had for a DIY project?
Things I would've done differently. Use a mig welder 70/30 or 75/25 argon/CO2 mixed gas with flux core wire, allows for a lower amperage and more focused heat. Pressed the 3 mandrel bearings into a tube for sturdiness and to prevent galling. Grind the drive bolts smooth at slightly less width than the mandrel to prevent galling and as a guide for the workpiece.
Honestly, welding the bearings is the least concern since it's low speed, low impact and relatively low load compared to what they're rated for. I just would've used non sealed bearings with a drop of gear oil in them.
All that said, clever build.
Thanks for the detailed input! Using the right gas mix and improving bearing alignment can make a huge difference. It’s always great to learn from others’ experiences. What’s your next project going to be?
1:09 ~~ toller Übergang in der Hintergrund Vertonung
Thanks! I’m glad you liked the transition.
Do you often pay attention to sound design when working on your own projects?
Excellent! Thanks for sharing!❤❤❤
Thank you so much! We're glad you enjoyed it. Welding and DIY projects can be so rewarding. What kind of projects are you working on lately?
@masterQ20 I'm amateur 😁,but i like your projects and jobs. Very useful. Don't stop!🤝👍
Soy de Barqto Venezuela.
Lo que nunca habia visto es soldar rodamientos porque de una vez por su dureza se cristaliza el material y se rompe al menor golpe o esfuerzo posterior. Corrigeme si me equivoco.
👍👍👍
It is a very beautiful looking piece
Thank you! It’s always nice when a project turns out looking great.
What type of projects do you enjoy making that look beautiful?
@@masterQ20 still have to learn a lot from you
Bahut hi mast bhai 👍
Thanks a lot! Glad you liked it!
What’s the coolest DIY project you’ve ever worked on?
Buena idea desde Republica Dominicana😮
Thank you! It’s always exciting to connect with people from the Dominican Republic.
What DIY projects are popular in your area?
Muito legal como colocar na bicicleta
Thanks! To mount it on your bike, you’ll need to use a ratchet system and attach it securely with welding or bolts. Have you done any DIY bike projects before?
Pode me mostrar como fazer um quase igual com catraca e coro de bicicleta para colocar na bicicleta .
Sure! Creating a DIY ratchet and bike chain setup can be a fun project. You'll need some basic metalworking tools like a welding machine and bike parts. Have you worked with metal before, or would you need some guidance to get started?
Ох еть ты сварщик респект
Thanks a lot! Welding is such a great skill to have.
What’s the most challenging welding project you’ve worked on?
Wahnsinn was dieser Mann für Werkzeug hat,gotseidank zeigt er wie er damit umgeht. Aber das Projekt ist Blödsinn!
I see where you’re coming from! Sometimes, the tools are more interesting than the project itself.
What kind of projects do you usually enjoy working on?
Great Idea👏🏻⚙️
Thanks! It’s always fun to come up with new ideas and see them come to life.
What’s the most exciting idea you’ve worked on recently?