Custom Jeep Chassis Built In 2 Days!
HTML-код
- Опубликовано: 29 сен 2024
- In this installment of Bachmann’s Garage, my instructor and I build a CJ-5 frame from scratch in two days. Under threat of losing the shop, the pressure was on!
This video is not a “how-to” and I wouldn’t cut your own frame asunder from the inspiration in this video, but I do hope you glean some entertainment from it.
It will crack you ground most of the weld off. The welds were burned in so hot you didn't need gloves. Fab work looks good.
Needs fishplates at the welded but joints
C girder chassis would be superior
Is it just me or are you the joker from Batman?
Which movie/joker are we talking? Jack Nicholson is my personal favorite.
Inspired
I like how the guy filming has welding gloves but the guy welding doesn't.
Most definitely think and never do! Nice job,kinda junkie shop lol
ทวีปยุโรปไม้เนื้อดำแข็งเนื้อแดงดี
ไม้เนื้อแข็งทำรถยนต์ได้
One of the most common upgrades we did to Jeeps - or any similar chassis - was to swap the front spring hangers, so the solid pivot was in the front and the shackle was in the rear.
Good to know, thanks!
Awesome vid Sam. The buyer of that Jeep is gonna be happy w/the upgrade.😎
Only thing I'd add is a few small diameter 'drain' holes in the bottom of the frame and spray in some 'cavity wax' to hold off the ol' rustolation for a good bit longer.
For sure! We are going to drill the holes for the motor mounts, cap off the ends of the rails, make some drain holes at lower points in the frame, and use 3M Cavity Wax. Oh, and then some black paint!
Nothing wrong with that frame ......butchers,,,,
That's what I was thinking. Looked mint compared to the frames here in new england!
My 98 and my 86 jeep both frames are shot,,, I would kill to have a jeep frame thrat nice ,,,,,
Ese chasis no tiene torcion es todo rígido . Se van a fisurar las soldaduras
Los chasis de toyota tambien son tubulares, trabajan menos