@@VHarel-mt6yi i used a bldc motor off Amazon. Just a 2kw brushless motor with bicycle control. 2x2x1/8 aluminum angle and 2x4x3/8 aluminum for motor base A 1" dia 1/8" aluminum round tube as coupler which was cut then hand drilled in drill press for two different diameters of motor and electric motor. Then tap it for four o 10-24 set screws on it. The rest is a up to you how you assemble. Add a dpdt switch for speed high low. Another switch to tap into 5v ref wire if you want to control throttle.from hand switch or pot. Finally battery, that is the biggest cost. My cost to build this was under 500$ with battery, as I had the motor already.
interesting. Got an old 9.9 that would be a good candidate for such conversion. any part list of what you got would be appreciated.
@@VHarel-mt6yi i used a bldc motor off Amazon. Just a 2kw brushless motor with bicycle control.
2x2x1/8 aluminum angle and 2x4x3/8 aluminum for motor base
A 1" dia 1/8" aluminum round tube as coupler which was cut then hand drilled in drill press for two different diameters of motor and electric motor. Then tap it for four o 10-24 set screws on it.
The rest is a up to you how you assemble. Add a dpdt switch for speed high low. Another switch to tap into 5v ref wire if you want to control throttle.from hand switch or pot.
Finally battery, that is the biggest cost.
My cost to build this was under 500$ with battery, as I had the motor already.
Amp numbers were out of water no load. Of course in water they doubled
Why is vevor slapping stickers on there stuff if they dont own it or have anything to do with building it?
They are a distributor just like most sellers on the Internet. Motor is sold under various names on eBay and jungle site.