If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
Just wanted to say hello and thank you from across the pond, just completed my Pocher 1299 and I found your videos extremely beneficial to get me through a few of the more difficult areas. Much appreciated!!
WOW - what a build! 20% looking for parts. 30% - study assembly diagram, 50% - assembly. From the size of this model, and the weight, you just converted your workshop into a gym!
Wayne, I'd like to apologize. A couple weeks ago I tweeted you about this build asking when you were going to start. I didn't realize it was 1/4 scale. It looks enormous. That being said I am excited to watch the progression of the build. Thank you. Love your channel.
The next step is when you put the two screws in the top of the engine so you were right not to put the four screws in and only put the two screws in the gold cover. Loving the new build. Stay safe all.
Wow. That is super impressive Wayne. If only eaglemoss would bring this out as a partwork. If I had this as it is, I would never know when to stop & have a rest. Can not wait to see the build progress. That engine is mighty impressive.
I'm so impressed well done landing this to build, expensive but beautiful builds when completed so this and the tumbler have my total attention. It will be interesting to see how you decide on a stopping point as it would be so tempting to do just one more little bit. But I wish you well but I'm as jealous as hell. 👍
There is a special liquid for preserving decals (it also "sucks" decals on to surface) also those decals can someties be very brittle so using a cotton swab is more preferred then tweezers.
@@WorldofWayneUK Amongst the painting tutorials over on the Warhammer channel, there are a couple of great videos with tips for applying transfers/decals. Try using a small paint brush - plenty of water on the area first, so that the decal floats a bit, then a moist paintbrush to position.
Hi Wayne, nice video, thanks for sharing. May I ask you something that is maybe obvious. The whole bike is build with screws? No glue in any part? I’m thinking in buying one built and disassemble it. Many thanks 😊
Just found a place where this can be purchased from if anyone wants to build it Wayne. The company name is Silent Autos diecast model cars. The price is £719.00 excluding P/P.
Wayne.. looking for assistance please. Step 17 attaching left side peg assembly / suspension onto frame.. cannot ascertain where to screw it onto the frame... any assistance would be great appreciated. Cheers
As far as the gold coloured part was concerned, I would just have put all 4 screws in, as the other one has 4 screws to hold it in place, seems daft not to just put 4 in on the other part as they are the same! It could be a mistake on the instructions.
@@bedfordshiremodeller4491 I went on line, Pocher used to distribute this kit, don't know who actually manufactured this Ducati kit. There are plenty of private sells and a few on line model sites that are willing to sell and ship. It's a pretty pricey deal.
Wayne, you're currently on about FIFTEEN models. Slow down. Please, just hold off on one or two and focus on the others. There are too many to keep track of. It makes the show confusing and I'm always lost whenever you get a new set of parts in. I'm not even sure if you finished the Bismarck! Or are you modifying it with aftermarket parts?
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
Like video
Just wanted to say hello and thank you from across the pond, just completed my Pocher 1299 and I found your videos extremely beneficial to get me through a few of the more difficult areas. Much appreciated!!
WOW - what a build! 20% looking for parts. 30% - study assembly diagram, 50% - assembly. From the size of this model, and the weight, you just converted your workshop into a gym!
This will be awesome when finished lucky Ian.
Wayne, I'd like to apologize. A couple weeks ago I tweeted you about this build asking when you were going to start. I didn't realize it was 1/4 scale. It looks enormous. That being said I am excited to watch the progression of the build. Thank you. Love your channel.
Hi wyane that's one detailed engine old saying time flys when your having fun lol
Holy shrimps thats MASSIVE! good luck on ur hard work World of Wayne!!!!
The next step is when you put the two screws in the top of the engine so you were right not to put the four screws in and only put the two screws in the gold cover.
Loving the new build.
Stay safe all.
Very nice build Wayne! Please don't wait to long for the next one.😁
Wow. That is super impressive Wayne. If only eaglemoss would bring this out as a partwork. If I had this as it is, I would never know when to stop & have a rest. Can not wait to see the build progress. That engine is mighty impressive.
Think eaglemoss would screw it up
I am looking forward to your building of the 1:1 scale icebreaker .
WOW what a build, i saw the bat car today in w h smith in Caerphilly .
It looks amazing.
Im really tempted by this kit, i own a ducati, your build will be the decider👍
Looks like a candidate for the battery screwdriver.. tight but not pressure so you avoid injury :)
Very nice upload you put together thanks for sharing.
Wayne thanks very much for replying to my comment. It's nice to see other people's work to get idea to improve my Channel. Take care & stay safe.
Hi, just building mine now. Great videos thank you. What's the preferred glue to use please so that it doesnt discolour rhe plastic? Thanks.
A good Ca glue will suffice but only use a PVA glue on clear parts
Looks like a fun build Wayne ,
Stone the wombats! 1:4 scale!
I'm so impressed well done landing this to build, expensive but beautiful builds when completed so this and the tumbler have my total attention. It will be interesting to see how you decide on a stopping point as it would be so tempting to do just one more little bit. But I wish you well but I'm as jealous as hell. 👍
Hi Wayne , its pronounced at "Penny Ga Lee" phonetically, LOL
There is a special liquid for preserving decals (it also "sucks" decals on to surface) also those decals can someties be very brittle so using a cotton swab is more preferred then tweezers.
I have it here but as the decal was so tiny I did it the old fashioned way
@@WorldofWayneUK Amongst the painting tutorials over on the Warhammer channel, there are a couple of great videos with tips for applying transfers/decals. Try using a small paint brush - plenty of water on the area first, so that the decal floats a bit, then a moist paintbrush to position.
Fucking hell that box is massive
Just commented on the 2nd episode. I’ve never done one of these builds, this is my first. really psyched to build it along with you sir!
Like video
That's either a big box or Wanye has shrunk :D
Hi Wayne, nice video, thanks for sharing. May I ask you something that is maybe obvious. The whole bike is build with screws? No glue in any part? I’m thinking in buying one built and disassemble it. Many thanks 😊
I don't think.ive used any glue.on this
Thanks for your answer. Just saw the instructions manual and it looks like some parts are maybe glued. Will go more into the manual. Thanks again
Found several models on eBay cost starting at $1000 US and up plus many add ons plus took. Model company is taking preorders new run now for $550 US
Pocher are really good i did a lamborghini 1/8, out of curiosity how much was the bike
No idea. I am doing it for someone else
Looking good Wayne. When you complete these builds for other people do you weather it or deliver it as is out of the box?
Out of the box
Awesome kit. I bet it's a pricey one.
Hi Wayne what size tips on Phillips screw drivers do you recommend for this model please.
PH0 tip
@@WorldofWayneUK Thanks Wayne
Wow looks amazing but any electronic with it
No
Just found a place where this can be purchased from if anyone wants to build it Wayne. The company name is Silent Autos diecast model cars. The price is £719.00 excluding P/P.
DAMN
you will have to say lets get Reving
Lol fibre glass in a model ?! - CRAZY
You do realise, Wayne, that if the model was much bigger, then you could ride it to Ian Campbell's place to deliver it personally!
Lol I bet think he would have to do in secret although Mrs wayne would lock wayne in mancave if she ever found out
What oil do you use on the screws? Thanks.
Just a regular 3 in 1 oil
Wayne.. looking for assistance please. Step 17 attaching left side peg assembly / suspension onto frame.. cannot ascertain where to screw it onto the frame... any assistance would be great appreciated. Cheers
I wish I had said in the video. I made this a while ago for someone else and don’t even own the bike now so can’t remember I’m afraid
Where can u buy this from?
What type of sprew cutters do you use
They are just a basic kind. They are actually in my Amazon store
it is whole partwork collection in one pack?
yep
Are you planning on painting the parts?
They don’t need painting. It could be weathered but as this isn’t mine I will leave as is
Me happy Here is a model of a motorcycle in scale 1/4 and they ship to Denmark. I'm also sad-can't afford it, have to save so I can afford it.
christ that's going to be a fair size once completed! I won't ask how much the model cost him
I built a Alfa Romeo Tourer years ago.Biggest regrets was selling it.😪
Also how can u get replacement parts for the eaglemoss collection ecto1
Contact Eaglemoss but they may charge you now
@@WorldofWayneUK thank you for the help Mr.Wayne ur a great help.
Apparently you can get this from Amazon for £1100
Where to bought it
Hey Wayne, FYI, it's pronounced like the card game, poker. That comes direct from the company...
I knew that. My brain didn’t communicate with mouth again lol
Hey Wayne, just letting you know for future episodes Pocher is pronounced Poke-air.
Yep I also learnt it’s pronounce Pen Garrr Lee
Actually, pan-ee-gah-lee
💚💚👍👍
As far as the gold coloured part was concerned, I would just have put all 4 screws in, as the other one has 4 screws to hold it in place, seems daft not to just put 4 in on the other part as they are the same! It could be a mistake on the instructions.
I tried. The screw holes are bigger so I guess something else is going there
@@WorldofWayneUK Oh I see,.... Now got me wondering what goes on/in.
@@mikeking2539 maybe upper engine mount ?
Som Pocher kits do hav electronic parts
Who sells this kit?
It's apocher kit not sure who the model manufacturers are on this1🤷♂️
@@bedfordshiremodeller4491 I went on line, Pocher used to distribute this kit, don't know who actually manufactured this Ducati kit. There are plenty of private sells and a few on line model sites that are willing to sell and ship. It's a pretty pricey deal.
If it got any bigger you would be able to ride it LOL
Wow the Display case for the bike is £340.00
Wow
Buy it here - uk.pocher.com/products/ducati-1299-pannigale-r-final-edition-hk117
💞💞🇦🇺🇦🇺🍺🍺🙏🙏👍👍
Don't drop it on your foot, that's accident waiting to happen :)
Wayne, you're currently on about FIFTEEN models. Slow down. Please, just hold off on one or two and focus on the others. There are too many to keep track of. It makes the show confusing and I'm always lost whenever you get a new set of parts in. I'm not even sure if you finished the Bismarck! Or are you modifying it with aftermarket parts?
be careful you dont cut you self doing this built