Zenith model F615 from 1963. Found schematic in Photofact set 649 folder 10. Made better than the ones RCA made back then that looks similar ,the 1-RA-50 and 1-RA-61, both which were an early PC board mounted components. Their knobs are held in place like yours Seth. I believe too in the past the old speaker was replaced by a service repair shop that had an oval speaker in stock. The cardboard tube was there to keep the ferrite antenna from busting in half in case the radio was ever dropped. With that strange shape I bet that did happen more than you would think! Good call replacing the E cap as it will be sold to someone else at the museum sale this year. Most collectors like working radios! The Bluetooth is always a plus as well.
I restored a Crosley from 1940 that had, I am pretty sure, the original filter caps that worked fine. I debated a bit and decided to restuff the can. The old electrolyte was still wet. Always wondered if I did the right thing but I tend to leave it playing for hours (I added a bluetooth receiver to the phono input). The light-hearted tune about poisoning pigeons was a little unexpected 😄 Look forward to your next projects Seth.
I did Google search, and this is a Zenith F615 from 1962 with the CONELRAD markings on AM. Good call with the Bluetooth on this model because there's nothing to listen to on AM nowadays.
I think you made the right call on the electrolytics. Whenever something comes into our shop which will run without service for an indefinite period, we replace those components which will inevitably fail before the EOL of the rest of the machine - and that always includes the electrolytics. Three gang tuner, six tubes, nicely dimensioned rod - no wonder this sounded good. You mentioned that Zenith used one chassis in many different cases and I wonder whether this particular one wasn't also meant to be used in their smaller consoles? Stereo LPs were still a few years off and Multiplex FM even further.
Quite often I have found the filter caps ok in old radios. If the radio is for my own use I leave them. Most of them have carried on wirking fine fir years . Different if you are selling to the public of course . Aleays pleased to see one of you vids pop up . Best wishes from the UK .
I like that set, not the styling, but the overall design of the electronics. About the filter caps, good cal replacing them for reasons others have noted, but I would add that a good ESR value with your tester may be misleading. The tester only puts 600mv across caps that are rated at 100s of volts; turn up the voltage and the ESR may go WAY up. Cheers!
That's a really nice wireless set with classic mid-century styling. I agree you made the right call with the electrolytics. A collector could always reverse out the new ones if they felt like it.
![Natti Natasha - Quiéreme Menos [Official Video]](http://i.ytimg.com/vi/R57RrTjRGxk/mqdefault.jpg)
Zenith model F615 from 1963. Found schematic in Photofact set 649 folder 10. Made better than the ones RCA made
back then that looks similar ,the 1-RA-50 and 1-RA-61, both which were an early PC board mounted components. Their
knobs are held in place like yours Seth. I believe too in the past the old speaker was replaced by a service repair shop that
had an oval speaker in stock. The cardboard tube was there to keep the ferrite antenna from busting in half in case the
radio was ever dropped. With that strange shape I bet that did happen more than you would think! Good call replacing the
E cap as it will be sold to someone else at the museum sale this year. Most collectors like working radios! The Bluetooth is always a plus as well.
I restored a Crosley from 1940 that had, I am pretty sure, the original filter caps that worked fine. I debated a bit and decided to restuff the can. The old electrolyte was still wet. Always wondered if I did the right thing but I tend to leave it playing for hours (I added a bluetooth receiver to the phono input). The light-hearted tune about poisoning pigeons was a little unexpected 😄 Look forward to your next projects Seth.
I did Google search, and this is a Zenith F615 from 1962 with the CONELRAD markings on AM. Good call with the Bluetooth on this model because there's nothing to listen to on AM nowadays.
Very cool Zenith Wedgie! I’ve never seen one of those before but I like the design. Love the Tom Lehrer tune, reminded me of the old Dr. Demento show!
Wonderful quality. I would have taken the cap out of circuit to because of the age it has. Thank you for uploading.
Love the Tom Lehrer song! One I often perform at open mic nights here in the UK.
I think you made the right call on the electrolytics. Whenever something comes into our shop which will run without service for an indefinite period, we replace those components which will inevitably fail before the EOL of the rest of the machine - and that always includes the electrolytics.
Three gang tuner, six tubes, nicely dimensioned rod - no wonder this sounded good.
You mentioned that Zenith used one chassis in many different cases and I wonder whether this particular one wasn't also meant to be used in their smaller consoles? Stereo LPs were still a few years off and Multiplex FM even further.
Quite often I have found the filter caps ok in old radios. If the radio is for my own use I leave them. Most of them have carried on wirking fine fir years . Different if you are selling to the public of course .
Aleays pleased to see one of you vids pop up . Best wishes from the UK .
Tom Lehrer ! I listened to all his comedy music when I was growing up.
you did another wonderful job Mr. Radio. it sounds great. the design reminds me of an old Seeburg jukebox
RCA’s version they called the Filteramic
I have a few rca ones from 1960 that has that antenna
I like that set, not the styling, but the overall design of the electronics. About the filter caps, good cal replacing them for reasons others have noted, but I would add that a good ESR value with your tester may be misleading. The tester only puts 600mv across caps that are rated at 100s of volts; turn up the voltage and the ESR may go WAY up. Cheers!
That's a really nice wireless set with classic mid-century styling. I agree you made the right call with the electrolytics. A collector could always reverse out the new ones if they felt like it.
thank you for working on those orphaned old radios that I had no idea even existed.
Nice job mister zenith
This zenith radio was giving to me. It has tubes and it takes a while to warm up it’s just am.📻
Good call on the cap, at least you left it in place 👍
That's a tidy little low hours unit, wonder what killed the original speaker?
Right out of a 1950s B sci fi movie .
Wait, was that a Packard??
Hi there what up