nice vid no doubt i love that varnish...i use a sticky areosol that is made for coiling starter and alternator automotive parts. its orange but also keeps coils from spreading when winding nice job man nice job im going to shop today and gettin some more wound up n wired up couple frames i need to get put togoehther ne wayz hat tip bud nice slow patient job shows the craftmanship that goes into quality work for quality parts
приветствую Влад, подскажи плиз сколько витков для шейдерной мотают, немогу понять по своим машинам на что они расчитаны, на всех 47 мкфр кондёры стоят, но работают по мощности вроде по разному... интересно пишут 8 10 12 слоёв но не количество мотков...или может по весу можно отличить шейдер от линера?
salut am 2 intrebari: ce grosime are sarma ? de unde iei mijlocul pentru bobina ? Vreau de ceva timp sa-mi fac bobine pentru aparatele mele dar nu am de unde sa iau piesa din mijloc.
can i be so nosy to ask you where i can get a coil winder like the one you are using? Ive looked on ebay but cant find the one you are using. I would love one just like that!!! Thanks
wow man those look great. ive been winding my own coils for awhile now but ive never used varnish between the layers like that. the closest thing ive done is dip them in Temco resin and bake them. im assuming your doing that for added insulation?
приветствую Влад, в очередной раз))) есть такой интересный вопрос, если у "шейдера" облегчить боёк, он преобретёт свойства линера? или нет смысла напрягать мозги? у меня в наличии 4 аппарата, катушки по стандарту (я так понимаю) на всех стоит кандёр 47 мкф поддастся ли она переделки или не стоит? если можно ответьте подробно, и разъясните что значит 8 , 10 , 12 слоёв на катушках? везде по разному пишут, немогу найти конкретную информацию...
привет,много зависит от колва игл,на которое расчитана машина и от качества катков,китайские 12 слоев,будут слабее фирменных 8-рок,тем более что не только катки идут в расчет,при разработке машины,но и рама ,боек,пружины.,помимо того,что вообще задумывалось по концовке.)) )Самое простое,как различить визуально машины,у лайнера -облегченный боек.
whats up dude!!!? Ive been watching all your videos on building tattoo machines. Im curious about the stuff you're brushing on the coils. What is that you're using?
Bonjour comment sappel la pièce que tu place au cœur de la bobine? J'arrive pas a en trouver! Peux tu me renseigner! Et de quelle matière son les 2 rondelles au extrémité stp! Cordialement
спасибо за ответ, но есть еще один назривший вопрос))) значит количество микрофарад на кандёре не имеет значения для визуальной диагностики машинки? облегчённый боёк - что это? как он выглядит вообще?))) вроде все бойки на моих аппаратах с виду одинаковы... если есть возможность, скинь мне фотки разных, конкретно отличающихся на первый взгляд машинок, буду очень признателен))))
свойства машины зависят не только от веса бойка но и общей геометрии рамы,ну и емкость кондера влияет .Кол-во слоев как бы определяет мощность машины,но это не значит,что чем их больше ,тем лучше)))
Привет, а подскажи в сколько витков для лайнера, цвета, теней. Или стандартно 10-16 на такой сердечник?Проволока б/у подойдёт P.S классные катушки, круто мотаешь🙂
i asked if you cand teach me to do that? coz i realy do want to learn... i do some tattoing and id like to learn more. if it is mossible can you teach me how do i do it correctly? or teach me even more you know about tattoo machines. thanks
Esta chido este video pero alguien me podria desir de que medida o calibre es el cable o alambre que se ocupa para hacer las bobinas y cuantas bueltas lleva gracias
hello friend us greet you and your loved ones , I have a question for you brother. 1 few turns should be given to each coil to function properly ? 2 or glue?
+jesus torrence Coils for tattoo machines, considered as the length of the layers is different, and the number of turns is changing ... standard 8-10 layers.
+Vlad “akella” Gruzin. hi vlad. what device did u use to build the wrapping machine? and also, is that varnish you are using? thanks for the info. great vids btw
+Влад.. А скажи пожалуйста, Количество слоёв обязательно должно быть чётным и полным? просто видел ролик как чел мотает 9 слоёв и десятый неполный в несколько оборотов... При обтяжке такие катушки выглядят как бы с резьбой... расскажите про это в двух словах, если не затрудит....зарание спасибо...
Согласен. Если так мотаются все катушки для машинок то не удивительно что они столько стоят. ТОЛЬКО из-за того что лень поискать в интернете простейший станок для намотки катушек и прямления проволоки. Все что я увидел на видео это попытка ровно намотать проволоку из-за косого станка и, возможно, не слишком прямой проволоки.
I therefore made a few videos to those who are interested and want to learn new things, can learn and understand - how to do this)))) Sorry, I personally can not take the time to anyone who asks, otherwise he can not do the work) )))
всё понял, у меня действительно китайцы, там где я живу, самое простое это приобрести машину из китая, быстрый, дешёвый но ненадёжный вариант... что имеем тому и рады))) жаль что ничего конкретного не могу узнать, очень помогло бы для самостоятельного сбора аппарата....
Столько любви, усердия и сил в каждый виток! Респект бро! Лайкос однозначно!
Спасибо))
nice vid no doubt i love that varnish...i use a sticky areosol that is made for coiling starter and alternator automotive parts. its orange but also keeps coils from spreading when winding nice job man nice job im going to shop today and gettin some more wound up n wired up couple frames i need to get put togoehther ne wayz hat tip bud nice slow patient job shows the craftmanship that goes into quality work for quality parts
A must watch on tattoo machine coils building ! BILL KEARNEY. :-):-
You do amazing work man
Great upload. I read comments just to be sure it is Yacht Varnish? Thanks
where do you buy the stuff you are coating the wire with?
awesome ..
may i ask something ?
what a liquid did you put on the copper ? thanks be for
hi thanks, this is yacht varnish.
Спасибо таким людям!
Traiasca Moldova !
youre the best my friend.
thank you)
So genius at your craft:)
Good to see your work, knowledgeable work and respect that 😘😘😘
приветствую Влад, подскажи плиз сколько витков для шейдерной мотают, немогу понять по своим машинам на что они расчитаны, на всех 47 мкфр кондёры стоят, но работают по мощности вроде по разному... интересно пишут 8 10 12 слоёв но не количество мотков...или может по весу можно отличить шейдер от линера?
Fucking love the Manson background and cool ass vid bro. Love from Oklahoma!!!
thanks
Rezesii Moldovei where can I buy your coils homie?
salut am 2 intrebari: ce grosime are sarma ? de unde iei mijlocul pentru bobina ?
Vreau de ceva timp sa-mi fac bobine pentru aparatele mele dar nu am de unde sa iau piesa din mijloc.
can i be so nosy to ask you where i can get a coil winder like the one you are using? Ive looked on ebay but cant find the one you are using. I would love one just like that!!! Thanks
ну я хз... что это? клей какой-то, всеравно, смысл? чтоб пробоя не было или танцы с бубном какие? объясните по науке.
Ya but how are determining the length of the wire? By voltage drop?
thanks for the detailed descriptions
thanks for all of your badass vids bro...question..how do you feel about the red insulating varnish for the cores? is this good to use?
thanks for the suggestion))
The varnish you use on the coils .it has to be baked to dry?
What are you "painting" on the wire when you first begin to wind the coil?
Hi Vlad,
I've watched most of your videos...you do very good work. I wanted to know what kind of varnish do you use to make your coils.
do you have a any insulation between your core and your first layer of wire? if so what did you use?
wow man those look great. ive been winding my own coils for awhile now but ive never used varnish between the layers like that. the closest thing ive done is dip them in Temco resin and bake them. im assuming your doing that for added insulation?
sorry, I do understand. I just didn't realize or think that you could use wood varnish on magnetic coils.
приветствую Влад, в очередной раз))) есть такой интересный вопрос, если у "шейдера" облегчить боёк, он преобретёт свойства линера? или нет смысла напрягать мозги? у меня в наличии 4 аппарата, катушки по стандарту (я так понимаю) на всех стоит кандёр 47 мкф поддастся ли она переделки или не стоит? если можно ответьте подробно, и разъясните что значит 8 , 10 , 12 слоёв на катушках? везде по разному пишут, немогу найти конкретную информацию...
привет,много зависит от колва игл,на которое расчитана машина и от качества катков,китайские 12 слоев,будут слабее фирменных 8-рок,тем более что не только катки идут в расчет,при разработке машины,но и рама ,боек,пружины.,помимо того,что вообще задумывалось по концовке.))
)Самое простое,как различить визуально машины,у лайнера -облегченный боек.
whats up dude!!!? Ive been watching all your videos on building tattoo machines. Im curious about the stuff you're brushing on the coils. What is that you're using?
Hi, unfortunately not sure that I understood you, but when it comes to covering the coils, this varnish
Yes, anywhere in the world
Bonjour comment sappel la pièce que tu place au cœur de la bobine? J'arrive pas a en trouver! Peux tu me renseigner! Et de quelle matière son les 2 rondelles au extrémité stp! Cordialement
hello brother I have a question, what gauge of enamel wire do you use? Do you still use varnish for coils or do you use lacquer?
Hi, I use enameled wire, which I additionally varnish to create a monolith.
Bravo!!! Buna treaba +10!!!
спасибо,Юра)
спасибо за ответ, но есть еще один назривший вопрос))) значит количество микрофарад на кандёре не имеет значения для визуальной диагностики машинки? облегчённый боёк - что это? как он выглядит вообще?))) вроде все бойки на моих аппаратах с виду одинаковы... если есть возможность, скинь мне фотки разных, конкретно отличающихся на первый взгляд машинок, буду очень признателен))))
свойства машины зависят не только от веса бойка но и общей геометрии рамы,ну и емкость кондера влияет .Кол-во слоев как бы определяет мощность машины,но это не значит,что чем их больше ,тем лучше)))
ok cool thnks Vlad nice work.
Hi Sergio, do not quite understand your question))), the washers are made of fiberglass, I hope I understand you)))
Dude, please tell me which is the diameter of the copper wire that you use? Is that a 0.5 mm?
Hi, did you make the jig? Thx
Do you use enameled wire or bare wire?
Привет, а подскажи в сколько витков для лайнера, цвета, теней. Или стандартно 10-16 на такой сердечник?Проволока б/у подойдёт
P.S классные катушки, круто мотаешь🙂
есть стандарт.лайнер -8 слоев . шейдер -10
What is that you are applying, glue? and why?
this varnish for extra insulation and monolithic coils
Vlad Gruzin
Is it regular wood varnish or a special kind?....and what kind and size wire are you using?
dây đồng dùng để quấn coil là dây đồng số mấy vậy bạn
u use real coil wire?
Добрый день! Подскажите пожалуйста, чем отличаются катушки для лайнера и шейдера?
привет,как правило ,количеством слоев
what is the height of the coils and the number of needles needed machine?
Hello, you can use any paint, but is most often used yacht varnish
Great music MM .
i know this is an old video but i would love to know what youre using as tention for your wire, its down below so we cant see what it is
scape tape
well you do nice work!!! Thanks for answering my question.
need to know which activities need a machine and how much needles
what are you wiping on the wire?
what are you doing (if anything) to keep tension on the wire?
rewind worth reducer, which does not allow the wire to unwind back when I pull it
thanks for share this video,...what type of copper and thickness of copper u use for make a coil ?
+mandeep singh AWG24
@YaelTat2s ,thankee )))) ,a varnish
What is the difference between a coil where i dont put the varnish on the layers ?
In principle, no difference .. Varnish makes the coil monolithic, reducing the possibility of short circuit or delamination of layers
Привет, для чего нужен лак?
what type of oil do you use while you are winding the coils
Its not oil
хотелось бы узнать почему китайские 12 будут хуже фирменных 8ок? заранее благодарен!
You can pretty much buy everything you'll need on-line to make coils. Once you find good quality...stick to it and practice, practice, practice.
i asked if you cand teach me to do that? coz i realy do want to learn... i do some tattoing and id like to learn more. if it is mossible can you teach me how do i do it correctly? or teach me even more you know about tattoo machines. thanks
How do you know how much wire to use
Does everyone use varnish?
Привет влад! такой вопрос у меня, нужна ли изоляция между стержнем и проволокой? или у тебя лак её заменяет)
привет,изоляция обязательна
что лучше подходит для изоляции?
Саня Иванов
скоч в помощь...
How much do u charged 2 make a set of those?
Esta chido este video pero alguien me podria desir de que medida o calibre es el cable o alambre que se ocupa para hacer las bobinas y cuantas bueltas lleva gracias
compa cuantos metros de cobre compraste
what are you using for your core?
what is the liquid that you use
Как толстую проволоку вы используете?
вы это куском канифоли тыкайте во время намотки ?
What size of wire do you using?
это лак,он делает катушку монолитной,исключая лишнюю вибрацию и уменьшая вероятность пробоя,все трансфораторы залиты лаком))
What exactly are you brushing on?
ola soy victor de chile amigo queria saber cuanto dinero me costaria conseguir esas bobinas fabricadas por tii ??
hi, can any varnish, for example, yachting varnish
а чем это ты мазал ???
если не секрет ? =)
But you tell me one thing, your coil wind when done you connect capacitor which mf/ uf. For coil 12 rap. Plz.tell me
No 😂
это лак, лак или Доставка Оплата
Сан - Хуан, Аргентина, спасибо.
Hi, Can i Do a Coil whit no Varnish ? If copper touches copper will it work ? thanks :) .
Alejandro Toro Hi, for winding coils used lacquered wire that does not need additional protection .That that I do not necessarily ...
hello friend us greet you and your loved ones , I have a question for you brother. 1 few turns should be given to each coil to function properly ? 2 or glue?
+jesus torrence Coils for tattoo machines, considered as the length of the layers is different, and the number of turns is changing ... standard 8-10 layers.
+Vlad “akella” Gruzin. hi vlad. what device did u use to build the wrapping machine? and also, is that varnish you are using? thanks for the info. great vids btw
+Влад.. А скажи пожалуйста, Количество слоёв обязательно должно быть чётным и полным? просто видел ролик как чел мотает 9 слоёв и десятый неполный в несколько оборотов... При обтяжке такие катушки выглядят как бы с резьбой... расскажите про это в двух словах, если не затрудит....зарание спасибо...
Привет,нет не обязательно,я делал даже конусные катушки)))
Hello,, it was an electric screwdriver))), you can use any nail polish
How do you calculate the number of turns needed?
а какой тольщены лучше всего использовать проволку?
0.51-0.56 или 24AWG
What brand of varnish are you using?
Any varnish is suitable
What's the gauge of wire do you use?
How much do you sell the coils u make for?
Согласен. Если так мотаются все катушки для машинок то не удивительно что они столько стоят. ТОЛЬКО из-за того что лень поискать в интернете простейший станок для намотки катушек и прямления проволоки. Все что я увидел на видео это попытка ровно намотать проволоку из-за косого станка и, возможно, не слишком прямой проволоки.
thank you))
@akella176 i know about hand winding 22g wire and it depends how perfect you want them
what is the liquid you are using while making the coil
this varnish
Beautiful
What was that liquid stuff you were putting on there
this varnish
quite possible))) wire is coated, you can not varnish over again, this is what I do)))
Hey ,where can I buy these ones
@pg1437 Thanks, I'll shake my reel))) from the varnish store)))
I therefore made a few videos to those who are interested and want to learn new things, can learn and understand - how to do this)))) Sorry, I personally can not take the time to anyone who asks, otherwise he can not do the work) )))
What gauge of copper wire you use?
AWG-24
what are you doing with the knife blade?
Do you mean a plastic ruler for sealing layers?
Vlad Gruzin yes thats it...thank you...
всё понял, у меня действительно китайцы, там где я живу, самое простое это приобрести машину из китая, быстрый, дешёвый но ненадёжный вариант... что имеем тому и рады))) жаль что ничего конкретного не могу узнать, очень помогло бы для самостоятельного сбора аппарата....