I been patiently waiting for vid. MN has stepped it up, and done a proper job with this one. Just not too fond of the servo location, but it's better for performance. I say the colour suits it well, cause it's a Brabus. Great run!
Hey bud. Man I felt like a real baller having this kit about Christmas time. Before I had even seen English vids for it. Anyways I bought the steel drive shafts and I replaced the servo right off. Servo Jx PDI-2506MG 25g I also used my old trx4 electronics. TQI controller and receiver and the xl5H. This truck is great, I have tried to figure a away to attach the c44 body since it’s a bit longer then others. But I’ve come up short. Anyways I’m trying to mount the esc in the trunk and cut some avenues for all the wires. But like you said the door is crazy hard to open. But the front ones almost always pop open during runs. I’m printing a larger door handle for the rear since I didn’t get the KS edition. Eventually they may sell all the accessories but I’m thinking of filling the unused holes for a mew paint job. I got the white one. It looks like you can get the body by itself now with a black interior. Oh well, reddish pink is cool. Also making a instrument panel to stick on the dash. The engine bay is ripe for some 3D parts to make it look more scale. Have you seen this on mn-model website? I can’t find its homepage. It’s like it just appeared out of nowhere. The KS kit only came with front lights? I thought it had more lights included. Like the rear spotlights or something. If they grow this model line I think they could upend the small scale crawler market. Well you are my outlet for Rc talk and thanks for posting your videos.
nice! I wasn't even planning on reviewing one because I was assuming same deal underneath as mn d90 but I'm glad I gave it a chance. Very nice little trail rig. Enjoy and go Run That Rc!
Awesome. I just got me one of these still in the box but after watching this video i am really looking forward to putting it together and doing some trailing with it.
So in the long term how bad is the water for these? I've got C24 those do great with it but I've trashed a MN99S the other day and another jeep one I cant remember the model, but I ordered a 86S and it should be here in the morning and I'm stoked but I dunno about putting it in the creek after the other failures.... Thanks for the vid, I got the same color coming.
I have a mn99 thats brushless and waterproofed and thats been good for 5 years now. I waterproof all my RCs that I plan to dunk in water. I never just trust the stock electronics to be waterproof unless its hobbywing WP electronics.
But rollovers are fun, and realistic! Lol Two thumbs up on the bonus material at the end--it's just art with your ground-level FPV "follow me" camera angle and the slo-mo. Anything less is yawn inducing
Nice! I have to try more technical stuff to determine if this can take down my C34KM build. I have climbed some insane stuff with my C34KM. This is a great platform to start modding for sure. MN Model has a great truck with this one. Now a yota body for it! Hahaha
Looks like a great truck it needs a couple of things but in general great value . I have placed 3 orders for one and they all got canceled 🤦 so now I give up on this truck
mn model has a light kit that may work but search light kits and you should be able to find some out there. I personally don't go that far just install lights if it came with the kit like the headlights.
is yours a rtr or a kit? if its a rtr its hitting high amp draw protection. this happens to some of the models because they set the protection too low. If its a kit your electronics might not be up to the job to power this rig. Before all that check your battery to make sure thats not the issue.
@@RunThatRC Opinion, this or a TRX4? I have 6-7 WPL and an MN90. Love them all! Especially the low cost and accessorizing them. But there's just so so so much more available for 1/10th scale... I like the extra "technical" goodies and space to play in the TRX4. Locking diffs, dig, 2 speed, etc etc. But I also realize that a 1/10 probably won't get as much run time since my yard suits the smaller rigs better. I actually have the go-ahead to build a crawler course with a waterway from the wife, if I find the motivation lol! I went through your videos, pretty sure I saw you mention a TRX4 before, but couldn't find any videos on it....
@@biggsdarklighter4586 I don't own a trx4 but have a buddy with a sport and the Defender. Ran them and know they performed well box stock with the defender being top heavy. The mn86ks is not even close when it comes to performance and aftermarket support but for a trail truck its size it runs pretty well and I enjoy it. 10th scales need more space and terrain to benefit and enjoy all its got to give. The MN86KS is slightly bigger than the mn d90 and imo also requires some good space trails to run it on. I say get both hahaha!
@@RunThatRC LOL but the trick is they have to trickle in SLOWLY so she don't notice how many I have! My friend/coworker stopped by the other day and just started laughing when he saw the workshop. I am running out of places to hide the bodies!
@@RunThatRC ohh man you're the best. Dude you really do a good job on your overviews and everything. Top notch stuff!!! I do plastidip my receiver though
it's a good kit and better than a WPL kit if your just starting out. As of now the WPL stuff has more upgrades for them but these will probably get some upgrade parts available soon hopefully.
I just choose F003-1 over MN99s as my budget crawler. I watched this a bit late I might have bought this instead, well maybe. Because this definitely is more expensive than F003-1. I wish you can also review Fayee F003-1. More power RTR!
@@RunThatRC Fayee. One of the budget RCs. I hope you can get a sponsor for that. :) F003-1 is usually compared with MN99s. I always enjoy your reviews and trail runs! More power!
this would be a good kit to get you going with kits. Goes together like a tamiya kit and quality is great. Easy enough to build and similar enough to 10th scale builds. Yeah I guess that can show how steep that section is, slid on my side hit knee and elbow luckily on dirt patches and not rocks lol.
I'm guessing no on the motorized servo step rails, surely the way they attach wont last long with any actual crawling. They just snap on, very cheesy but does look scale. I have the MN86K & didn't even realize there was a difference as I bought off of AliExpress. Hoping MN comes out with a K to KS package.. Don't really care about it being bushing as a crawler but would like the other accessories. But have to say even for a cheap $82 kit it is very cheap, the drive train is not very smooth, but maybe the crown & diff gears will break in some & quiet down some..
@@RunThatRC AliExprss did offer a 86K to 86KS kit for around $35 sometime last year, came with a red 20T motor & 2 pinions (1 was another 14T & the other taller),, bearings, front & rear bumpers, roof rack, snorkels & other accessories.. Well worth the money.
Hey, just found you and your experience/education on the MN models. I want to make an MN midel my first crawler but had a few questions. Any help would be appreciated.
this model isnt bad to start with. Helps you learn how to build and the instructions are pretty easy to follow. Only thing is this is more for trailing than crawling. Still a great truck imo
@@heizoukazuha9042 They are different trucks with different handling characteristics. They are both fun builds and good trail trucks. I personally like both but like the build of the 86ks a little better.
I'm using a hobbywing 1060 which is waterproof and a waterproof receiver. I had to go into the servo to waterproof that and add thin cloth to act like a filter for the motor openings so dirt doesn't get in.
it might be a problem on there website. You can try banggood. I believe its cheaper on BG site as well. Links for MN86KS from banggood: www.banggood.com/custlink/KKKdZS8hfh For MN86K: www.banggood.com/custlink/KDmEI99RfP
brushed motors are inherently waterproof. The smaller ones may not like it much but the motors on these don't mind water much. The servo has to be waterproofed. Check out my latest waterproofing vid. It applies to any size RC but I demo it on a small B14km.
My buddy has the mn45 now. I wasn't to interested in that model after WPL released there c34 and c44. If he does something with it I may feature it on my channel.
both gearbox are plastic gear but nice and strong. the difference is the k gearbox has bushings in it and the ks has ball bearings. The only difference is ball bearings and accessories for the ks verion.
can't wait to see the build series of this so i could see the differences between the KS and K versions. got my eyes on this since MN announced teaser releases of this last year. haven't yet purchased one, still got an ongoing project (will be having a cat😀) and i prefer the white body of this. i wouldn't ask anymore if you would recommend this, since it is already evident in your voice that this rig is already good. 😂😂 do you have any plans of printing some wheels/rims for this?
The battery I used on this run is a 1500mah 2s lipo. Not that heavy so a lion would sag it even more. I may try to fit the rear springs with a preload clip.
Are you sure it's a bigger scale compared to the MN D90s and C34s? I just see higher height on the 86 and so one must be reminded that the C34 and D90 are both small Jeep CJ/Wrangler style vehicles and the Mercedes G500 is a "bloated" SUV. Someone here will get measurements from the 1/1 vehicles and plug the numbers into a scale calculator and we'll know for sure....but it won't be me...lol
It claims to be a 12th scale. The d90 claims to be a 14th scale. But compared to those I feel like this just seems more substantial in size. Same as you, I will leave it to people to figure that out. I just want to run that rc hahaha.
Like that lots of detail my video with wpl b16 will be delayed pop the ESC on her third run when 49 mph then pop then smoke truck is OK that what you get for 15 dollar wish ESC the new one 80A comes with 550 motor revs at 22500 125 dollars Canadian that should do the trick all six tires balloon like twice the size when the parts come in I will send you the video promise with the speed run
16000 plus rpm one to one ratio every turn on the motor is turning all three axels same time using wpl one speed metal gear reduction gear box like I said just waiting on the ESC from amazon Feb 3 I hope well have fun building your next project and I send the video first thing the ESC comes in
Nice video buddy. I took the silver version an uploaded a video too. Maybe you can check it out. In my opinion the only thing needed are some oil shocks. Have a good one
I like it. Looks better than the crazy big axles the RGT 16th scale has. They are on the big side but find a 12th scale lexan body to fit and it might perform really well.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Check out the MN86KS here: www.remotoy.com/products/mn-mn86ks-g500-rc-crawler-kit?KOL&RUclips&Run_That_RC&MN86KS
Your closeup views and lighting is always on point--we get great views of the "guts" when you flip the trucks over. Much appreciated
Oh I was waiting for this vid!
That's a nice color. MN definitely stepped it up. Thing looks and sounds smooth.
It's impressive!
I been patiently waiting for vid. MN has stepped it up, and done a proper job with this one. Just not too fond of the servo location, but it's better for performance. I say the colour suits it well, cause it's a Brabus. Great run!
Yeah servo on axle not my thing. At least its hidden well under there.
Hey bud. Man I felt like a real baller having this kit about Christmas time. Before I had even seen English vids for it.
Anyways I bought the steel drive shafts and I replaced the servo right off. Servo Jx PDI-2506MG 25g I also used my old trx4 electronics. TQI controller and receiver and the xl5H.
This truck is great, I have tried to figure a away to attach the c44 body since it’s a bit longer then others. But I’ve come up short.
Anyways I’m trying to mount the esc in the trunk and cut some avenues for all the wires. But like you said the door is crazy hard to open. But the front ones almost always pop open during runs. I’m printing a larger door handle for the rear since I didn’t get the KS edition.
Eventually they may sell all the accessories but I’m thinking of filling the unused holes for a mew paint job. I got the white one. It looks like you can get the body by itself now with a black interior. Oh well, reddish pink is cool. Also making a instrument panel to stick on the dash.
The engine bay is ripe for some 3D parts to make it look more scale.
Have you seen this on mn-model website? I can’t find its homepage. It’s like it just appeared out of nowhere.
The KS kit only came with front lights? I thought it had more lights included. Like the rear spotlights or something.
If they grow this model line I think they could upend the small scale crawler market.
Well you are my outlet for Rc talk and thanks for posting your videos.
nice! I wasn't even planning on reviewing one because I was assuming same deal underneath as mn d90 but I'm glad I gave it a chance. Very nice little trail rig. Enjoy and go Run That Rc!
Awesome. I just got me one of these still in the box but after watching this video i am really looking forward to putting it together and doing some trailing with it.
trail it! It will surprise you.
I love how it looks and I’m excited for the WPL C54 but what I’d really love is a Land Rover discovery series 1
Nice little model. I love the G-Wagon. I don't have anything in that scale but it looks really fun.
its a good size for some serious trail action!
Did u chk out my video wit the mod I did on the jeep gladiator
wow that looks cool but from some build vids it looked like it had wltoys diffs. is that true?
I'm not sure if they are but I don't see a issue with them. Oversized for this build in my opinion but should be good.
i didnt mean to make it sound like a bad thing
I didn't take it that way just an observation .
That’s awesome mn picked up there game, I like that color, the electronics sound a lot better also.
Lol it needed the snorkel after all
it is a kit so the electronics like the esc, receiver and battery you will need to provide.
So in the long term how bad is the water for these? I've got C24 those do great with it but I've trashed a MN99S the other day and another jeep one I cant remember the model, but I ordered a 86S and it should be here in the morning and I'm stoked but I dunno about putting it in the creek after the other failures.... Thanks for the vid, I got the same color coming.
I have a mn99 thats brushless and waterproofed and thats been good for 5 years now. I waterproof all my RCs that I plan to dunk in water. I never just trust the stock electronics to be waterproof unless its hobbywing WP electronics.
Very nice.! Killer video. Killer truck.!
Thanks for stopping by!
Very nice review..the real G500 4x4 squared also has this color..I just finished my 86ks build as well..thanks for the video
thanks for stopping by!
But rollovers are fun, and realistic! Lol
Two thumbs up on the bonus material at the end--it's just art with your ground-level FPV "follow me" camera angle and the slo-mo. Anything less is yawn inducing
Have u tried to put weights on the wheels? Or its not needed?
wheel weights would help bring the weight down low. the truck performs well but would be better with weighted wheels for sure.
Will a 6 cell NiMh sub C pack fit inside?
Definitely have been enjoying mine. Very very capable rig. Great build quality, performance and price. Outperforms my C34KM/C44KM builds with ease.
Nice! I have to try more technical stuff to determine if this can take down my C34KM build. I have climbed some insane stuff with my C34KM. This is a great platform to start modding for sure. MN Model has a great truck with this one. Now a yota body for it! Hahaha
Looks like a great truck it needs a couple of things but in general great value .
I have placed 3 orders for one and they all got canceled 🤦 so now I give up on this truck
Ah that sux. I had that happen with fov equipment. It does put a downer when you have to go through all that for a order.
@@RunThatRC yep it does
Thanks for the vid! Just got the same kit. Will get rid of the pogo spring shocks though!! Love the driving area!! A1
thanks for stopping by!
Is this a good value truck? That body looks really good
In my opinion its worth it. Look around for a good deal.
What a lovely performing truck this is David. MN really have upped their game here without a doubt.
Yes for sure. What a change from mn model.
Hi, I saw you ran the car in deep water. Did you cover your receiver chipset with anything ? Thanks !😊
Or did you upgraded it to a waterproof receiver ? I was wondering if the stock receiver could survive in that deep water.😅
I have waterproofed the servo and used a waterproof 1060 hobbywing esc and Hobbyporter waterproof receiver.
Yooooooooo I’m so goin get one of those
Is there a lite kit that has all the lights, break lite, blinker lite, spot lite etc?
mn model has a light kit that may work but search light kits and you should be able to find some out there. I personally don't go that far just install lights if it came with the kit like the headlights.
Hey that looks nice, hopefully there's good aftermarket support😎🙏🏜
I hope so too. I think they will because this has to be the best RC they put out to date.
Цвет просто бомба🤩🔥
Кстати Гелендваген G500 4x4² в реальности очень огромный по отношению к другим машинам и даже обычному G500😊.
awesome video! please can you help me? mine keeps loosing connection for some reason..leds return to blinking and there's no throttle and steering..
is yours a rtr or a kit? if its a rtr its hitting high amp draw protection. this happens to some of the models because they set the protection too low. If its a kit your electronics might not be up to the job to power this rig. Before all that check your battery to make sure thats not the issue.
David, do you think this is actually a 1/12 scale? Or like a 1/11th scale? It is an odd size, and I really like it!
its a good kit. It's between 12th and 14th scale imo.
@@RunThatRC Opinion, this or a TRX4? I have 6-7 WPL and an MN90. Love them all! Especially the low cost and accessorizing them. But there's just so so so much more available for 1/10th scale... I like the extra "technical" goodies and space to play in the TRX4. Locking diffs, dig, 2 speed, etc etc. But I also realize that a 1/10 probably won't get as much run time since my yard suits the smaller rigs better. I actually have the go-ahead to build a crawler course with a waterway from the wife, if I find the motivation lol! I went through your videos, pretty sure I saw you mention a TRX4 before, but couldn't find any videos on it....
@@biggsdarklighter4586 I don't own a trx4 but have a buddy with a sport and the Defender. Ran them and know they performed well box stock with the defender being top heavy. The mn86ks is not even close when it comes to performance and aftermarket support but for a trail truck its size it runs pretty well and I enjoy it. 10th scales need more space and terrain to benefit and enjoy all its got to give. The MN86KS is slightly bigger than the mn d90 and imo also requires some good space trails to run it on. I say get both hahaha!
@@RunThatRC LOL but the trick is they have to trickle in SLOWLY so she don't notice how many I have! My friend/coworker stopped by the other day and just started laughing when he saw the workshop. I am running out of places to hide the bodies!
@@biggsdarklighter4586 hahaha I feel ya!
The snorkel snorkel everything must have a snorkel fixation is kinda old at this point. I agree--leave it off
I'm so curious how you're running the stock servo in the water? I ran mine in the snow the other day and the servo died on me
I have a video coming out soon that shows how I waterproof my rigs. I waterproofed the servo prior to this run.
@@RunThatRC ohh man you're the best. Dude you really do a good job on your overviews and everything. Top notch stuff!!! I do plastidip my receiver though
Bonne vidéo mon ami. Y a t'il une grosse différence de performance entre le mnd90 et le mn86 ??
very big difference between the two in setup. mn86 way better and more hobby grade assembly.
@@RunThatRC mille merci de ta réponse 😁😁
*Thank you for sharing this very informative video! 👍👍*
Glad it was helpful!
It looks cool! I might have to buy it! Thanks for the review~~ Is this car full waterproof?
its a kit version so I installed waterproof electronics. hobbywing and hobbyporter electronics are waterproof out the box.
Is it possible to put 1/10 servo on this?
maybe if you convert it to chassis mounted servo. may have suspension issues in stock axle mount location with a 10th scale servo.
@@RunThatRC Thanks
ok..i think i decided to get this than c24.. am i right?
it's a good kit and better than a WPL kit if your just starting out. As of now the WPL stuff has more upgrades for them but these will probably get some upgrade parts available soon hopefully.
Solid performer!
It did well and AMG so its sweet hahaha
I just choose F003-1 over MN99s as my budget crawler. I watched this a bit late I might have bought this instead, well maybe. Because this definitely is more expensive than F003-1.
I wish you can also review Fayee F003-1. More power RTR!
I'm not familiar with the f003-1. Who makes that model?
@@RunThatRC Fayee. One of the budget RCs. I hope you can get a sponsor for that. :) F003-1 is usually compared with MN99s. I always enjoy your reviews and trail runs! More power!
@@wmgonzalbo o I think I have a tracked version of it.
@@RunThatRC right I just saw that video. The tracks was useless good thing that you tried it with tires. :)
Have you upgraded anything before running them into water?
on this model I plastidip the servo board and used a hobbywing 1060 esc that is already waterproof.
I must get this g wagon
Looks really good and handles good too.
I’d like to build a kit some day. Maybe after I retire. 😃 Thank goodness you didn’t fall out of a tree. 😳😂
this would be a good kit to get you going with kits. Goes together like a tamiya kit and quality is great. Easy enough to build and similar enough to 10th scale builds. Yeah I guess that can show how steep that section is, slid on my side hit knee and elbow luckily on dirt patches and not rocks lol.
@@RunThatRC IKR when I fell out of the tree I landed really close to a rock about the size of a basket ball. 😳
@@RCModSquad close calls are scary. They do remind you that you are alive!
@@RunThatRC after I landed the pain let me know I was still alive for the minute anyway. 😂😂
This perfect mn model👍
the best MN Model yet for sure!
Do you think a 540 motor would fit?
there is some room under the hood. Im not 100% sure but if you can figure a way to mount the 540 to the gearbox it may work.
Great video and truck Bro!!
Impressed with mn model.
I'm guessing no on the motorized servo step rails, surely the way they attach wont last long with any actual crawling. They just snap on, very cheesy but does look scale. I have the MN86K & didn't even realize there was a difference as I bought off of AliExpress. Hoping MN comes out with a K to KS package.. Don't really care about it being bushing as a crawler but would like the other accessories. But have to say even for a cheap $82 kit it is very cheap, the drive train is not very smooth, but maybe the crown & diff gears will break in some & quiet down some..
probably could have an accessory pack to ks equip in the future.
@@RunThatRC AliExprss did offer a 86K to 86KS kit for around $35 sometime last year, came with a red 20T motor & 2 pinions (1 was another 14T & the other taller),, bearings, front & rear bumpers, roof rack, snorkels & other accessories.. Well worth the money.
Nice car. Performs good.
CAN I USE DUMBO 6 CHANNEL TRANSMITTER AND RECIEVER IS THEIR ANY PROBLEM USING THAT RECIEVER AND TRANSMITTER
the dumbo tx/rx are good and will work for this build. Not sure if the receiver is waterproof but plastidip can fix that!
Hey, just found you and your experience/education on the MN models. I want to make an MN midel my first crawler but had a few questions. Any help would be appreciated.
this model isnt bad to start with. Helps you learn how to build and the instructions are pretty easy to follow. Only thing is this is more for trailing than crawling. Still a great truck imo
@@RunThatRC That's awesome. I'm actually preferring a trail truck for a bit more speed and versatility.
@@RunThatRC do you recommend mn86 over mn99s?
@@heizoukazuha9042 They are different trucks with different handling characteristics. They are both fun builds and good trail trucks. I personally like both but like the build of the 86ks a little better.
@@RunThatRC thanks for the reply. I just bought the mn99s cause i find it cute 😂, in the future i might go for the mn86ks
It’s bigger that Mn90. 1/12?
yes it's a bigger scalemn d90 1/14 mn86ks 1/12 according to mn model.
Woww...bel video ...modello molto performante... ciao dall'Italia
glad you enjoyed! Thanks for stopping by!
Is that waterproof?
I'm using a hobbywing 1060 which is waterproof and a waterproof receiver. I had to go into the servo to waterproof that and add thin cloth to act like a filter for the motor openings so dirt doesn't get in.
CAN YOU SUGGEST SOME LIGHTS FOR WPL B36KM
sorry I don't really run lights so I don't know what's a good set. I do install whatever is included with the kits (mainly headlights).
Cool vid!
This is standard engine?
yes standard with Hobbywing 1060 esc.
@@RunThatRC any reason you replaced the stock ESC? apart from the fact that hobbywing is waterproof
@vinaimaharaj4769 mine was a kit. The motor and steering servo was included but not the tx/rx and esc.
How's the grip with stock tyres
Considering they aren't softer than the wpl and mn model d90 kit version tires they work ok. The hill in this video isn't easy on hard tires.
Good ride. I just started my channel and I will make a lot interesting upgrades for my MN86KS Brabus and will ride too ;)
Right on! Have fun!
@@RunThatRC Thank's )
I tried purchasing using your link and code and my card alert blocked me from purchasing from remotoy😝on 2 credit cards I know are good.
it might be a problem on there website. You can try banggood. I believe its cheaper on BG site as well.
Links for MN86KS from banggood:
www.banggood.com/custlink/KKKdZS8hfh
For MN86K:
www.banggood.com/custlink/KDmEI99RfP
is the stock servo and motor waterproof?
brushed motors are inherently waterproof. The smaller ones may not like it much but the motors on these don't mind water much. The servo has to be waterproofed. Check out my latest waterproofing vid. It applies to any size RC but I demo it on a small B14km.
Dude pls do a video of fitting a MN 45 body on a c34 chasis
My buddy has the mn45 now. I wasn't to interested in that model after WPL released there c34 and c44. If he does something with it I may feature it on my channel.
gearbox plastic or metal?
any difference to 86k and 86ks?
both gearbox are plastic gear but nice and strong. the difference is the k gearbox has bushings in it and the ks has ball bearings. The only difference is ball bearings and accessories for the ks verion.
Can u pls make a vid about c44 vs MN86KS? I wanted to buy the c44 but if this one is better then I will get this one.
Different scale but they are both good. Just choose the scale you want and have fun!
can't wait to see the build series of this so i could see the differences between the KS and K versions. got my eyes on this since MN announced teaser releases of this last year. haven't yet purchased one, still got an ongoing project (will be having a cat😀) and i prefer the white body of this.
i wouldn't ask anymore if you would recommend this, since it is already evident in your voice that this rig is already good. 😂😂
do you have any plans of printing some wheels/rims for this?
from what I can tell the k has bushings and doesn't come with rear spare, roof rack, brush guards and snorkels.
continue to monitor😊👍
I mite have to get one, I got all WPL;s on my channel
You will like it!
Lookin weighted down in the back might need a lift in the back
Yeah shocks are soft. And a little tire rubbing in the rear when full flexed.
@@RunThatRC is from the battery 🔋
The battery I used on this run is a 1500mah 2s lipo. Not that heavy so a lion would sag it even more. I may try to fit the rear springs with a preload clip.
Ook
Can we install the mn86ks body kit to mn99s?
Edit:view:16k
Subscriber:10k is that fair?
yes people! Subscribe! hahaha. Thanks for stopping by!
@@RunThatRC lol yeah keep it up I really like your video
Are you sure it's a bigger scale compared to the MN D90s and C34s? I just see higher height on the 86 and so one must be reminded that the C34 and D90 are both small Jeep CJ/Wrangler style vehicles and the Mercedes G500 is a "bloated" SUV. Someone here will get measurements from the 1/1 vehicles and plug the numbers into a scale calculator and we'll know for sure....but it won't be me...lol
It claims to be a 12th scale. The d90 claims to be a 14th scale. But compared to those I feel like this just seems more substantial in size. Same as you, I will leave it to people to figure that out. I just want to run that rc hahaha.
@@RunThatRC You iz right, run that RC, man. No time for nonsense! Hahaa
i guess the scale is 1:11 for this rig
nice! Im not one to worry about those fine details but its good to know for sure. I just want to Run That Rc! hahaha
actually i want the chasis for C44
WHATS THE TIRES THAT ARE ON IT??
stock kit tires they come with.
Very nice....
Thank you! Cheers!
It seems a bit too bouncy are you going to get a different suspension and get new tyres?
its a little bouncy. I will upgrade it probably in the future.
Cool vidéo 👍 🇫🇷
thanks for stopping by!
@@RunThatRC 🤜✨🤛
I like very much this tipe
It is a nice off road trail truck.
Me: waiting to arrive that rc car
Like that lots of detail my video with wpl b16 will be delayed pop the ESC on her third run when 49 mph then pop then smoke truck is OK that what you get for 15 dollar wish ESC the new one 80A comes with 550 motor revs at 22500 125 dollars Canadian that should do the trick all six tires balloon like twice the size when the parts come in I will send you the video promise with the speed run
b16 going 49mph is insane! thats got to be one of the fastest wpl Military trucks out there.
16000 plus rpm one to one ratio every turn on the motor is turning all three axels same time using wpl one speed metal gear reduction gear box like I said just waiting on the ESC from amazon Feb 3 I hope well have fun building your next project and I send the video first thing the ESC comes in
오우 쒰 ~^^잘가요 모터힘좋나요????
its a great Rc. Good power.
@@RunThatRC 리모컨포함인가요????
Nice video buddy. I took the silver version an uploaded a video too. Maybe you can check it out.
In my opinion the only thing needed are some oil shocks. Have a good one
I don't mind the shocks much. In real 1:1 trailing I bounce around everywhere like this lol.
This is not RTR? And the axles are too wide....
It's a kit. It is possible they will have a RTR version of this in the future.
The axles are fat and overbuilt, not like those svelte and normal looking axles on the D90s and WPLs. Looks odd. Hmm...
I like it. Looks better than the crazy big axles the RGT 16th scale has. They are on the big side but find a 12th scale lexan body to fit and it might perform really well.
They're like one ton axles😁
Nice channel 👍🏻
👍👍👍👍
glad you liked it!
Man, I wish I liked Mercedes bodies...
maybe there might be others coming in the future. This might be popular enough for them to pursue more verison hopefully.
Nice video keep on truckin I put up some new videos ck it out