High content silicone spray like what CRC sells is ideal for rubber exhaust hangers. Petroleum distillates in PB Blast and WD-40 will breakdown rubber. PB/WD will shorten the service life of your exhaust hangers but will not be immediately noticed.
@@MJAltairy Niiice, yeah man, love to see it! LSA G8s and SS are great. The wife and I really like our GX, I’ve gotta check out your GX videos. Glad I stumbled on your channel!
Yes I definitely can! I will say that it isn’t obnoxiously loud at all. It’s like the perfect amount of rumble without the annoyance factor. At least compared to my 03 gx470 which only had a muffler delete done. There’s little to no drone inside the cabin.
This isn't exactly bolt on, it does work though if you flip the direction of the hangers that bolt to the flange and bend the hangers down that go over the rear axle it really works well.
Just order some magna-flow exhaust manifolds and this exhaust! Excited to get it installed considering I’ve got an exhaust leak in the manifolds right now.
Were the nuts on the Y-pipe welded on or just rusted really badly? Getting ready to install a new catback and want to know what I'm getting into before I start pulling it apart.
It’s more of a “tame” rumble compared to the delete. Almost like how it “should” sound from the factory without being obnoxious. My previous gx was deleted and I prefer the MBRP kit.
@@MJAltairy sounds like what im looking for i have a muffler delete and just got the Carven dump exhuast wich i love design of but its so rowdy like makes interior vibrate rowdy so ill prolly try this one out i had a MBRP exhuast on my old tacoma and liked it so should be chillen
Great video to show us all how easily the GX and 4Runner exhausts mate up on each other. Gotta love that sound, too.
High content silicone spray like what CRC sells is ideal for rubber exhaust hangers. Petroleum distillates in PB Blast and WD-40 will breakdown rubber. PB/WD will shorten the service life of your exhaust hangers but will not be immediately noticed.
When I saw the G8 in the preview I was like, “hold on, was that a G8?” Ended up watching the whole video.
Lol 😂 yupp that’s my g8! Built LSA setup in it as well! I really need to do some content on that thing!
@@MJAltairy Niiice, yeah man, love to see it! LSA G8s and SS are great. The wife and I really like our GX, I’ve gotta check out your GX videos. Glad I stumbled on your channel!
Sounds great! Could you do some interior sound clips while driving?
Yes I definitely can! I will say that it isn’t obnoxiously loud at all. It’s like the perfect amount of rumble without the annoyance factor. At least compared to my 03 gx470 which only had a muffler delete done. There’s little to no drone inside the cabin.
This isn't exactly bolt on, it does work though if you flip the direction of the hangers that bolt to the flange and bend the hangers down that go over the rear axle it really works well.
Just order some magna-flow exhaust manifolds and this exhaust! Excited to get it installed considering I’ve got an exhaust leak in the manifolds right now.
How are you liking the exhaust system? Would you be able to do another clip of the exhaust sound? I am considering doing the same upgrade.
Sounds good bro 👍 definitely not obnoxious although a bit more growl wouldn't be too bad.
nice job, sounds great. Wear some eye protection!
Thank you ! cool video !!!
Nice job!
Were the nuts on the Y-pipe welded on or just rusted really badly? Getting ready to install a new catback and want to know what I'm getting into before I start pulling it apart.
@@VertigoGTI rusted to where i cut them off if i recall. Replaced them with new hardware from my local homedepot pretty much
@@MJAltairy Did you remember if you have to drill out the weld nuts on the y-pipe?
NICE! was thinking about getting the Curt hitch. does it work with the stock exhaust?
Oh yeah it actually pairs up perfectly with it! Here’s a pic of it:
instagram.com/p/Cb6Fzk2NrFy/?igshid=YmMyMTA2M2Y=
@@MJAltairy awesome!!tnx
Straight headers with a bit of cam please !
Just bought a 470, you live in Michigan?
Congrats! Yeah i do!
@@MJAltairy Dope I'm in Lansing you have instagram?
@@Philmographyfilms @mjaltairy
Is there a check engine light on cause of the new headers ?
Nope. I had one due to a bad O2 sensor that went away after it was replaced
Ahh ok cause I saw on the page that once you add the part it comes on idk because you bypass the catalytic converters
@@dchaparro23 oh I didn’t get new headers. Just replaced stock exhaust manifolds pretty much. The cats were still there
Do you know if it works with a 4th gen 4runner v8?
Im not completely sure to be honest but Id think it would fit.
How is this compared to a muffler delete
It’s more of a “tame” rumble compared to the delete. Almost like how it “should” sound from the factory without being obnoxious. My previous gx was deleted and I prefer the MBRP kit.
@@MJAltairy sounds like what im looking for i have a muffler delete and just got the Carven dump exhuast wich i love design of but its so rowdy like makes interior vibrate rowdy so ill prolly try this one out i had a MBRP exhuast on my old tacoma and liked it so should be chillen
@@quickscoper39 yeah i think you’ll be happy with the MbRP setup for sure!
Sticker ! Haha