LIN BUS Diagnostics | LIN BUS Communication Error | LIN BUS Waveform
HTML-код
- Опубликовано: 7 сен 2024
- In this video I explain the LIN BUS (Local Interconnect Network) diagnostics. I explain the diagnostics on a car with U1112 LIN Communication Error fault code, So, I explain the LIN diagrams, how to find the LIN network on the car, how to check the LIN BUS waveform with an oscilloscope and how to fix the issue.
You can also watch the other videos for the LIN-BUS and other networks on car (CAN-BUS, K-LINE) on the links below:
LIN Bus Explained | Everything You Need to Know about LIN BUS | Local Interconnect Network
• LIN Bus Explained | Ev...
CAN-BUS Explained | Everything You Need to Know About CAN-BUS | CAN-Bus Diagnostics & How It Works:
• CAN-BUS Explained | Ev...
CAN-BUS Explained (Part 2) | B-CAN Diagnosis | Test B-CAN with Multimeter & Oscilloscope:
• CAN-BUS Explained | B-...
K-Line vs LIN-Bus | K-Line Explained:
• K-Line vs LIN-Bus | K-...
Join the channel for more videos and more support:
/ @automotivediagnosis
Please follow us on the following social media too:
/ autodiag001
/ automotivediagnosis
fix-it-first.com/
#canbus
#LINBUS
#network
#carelectronics
#wiring
#wiringharness
#diagnosis
#diagnostics
Disclaimer:
Any information contained in this video is just the understanding of “Automotive Diagnosis: Cars Repair & Training Guides” and it is not an official guide or reference, so everything provided in this video is just a share of our experience and understanding and they are provided as a courtesy for your reference only. So, if you are using any part of this video, use the information at your own risk. We highly advise you to check the manufacturer owner’s manual before performing any act of removal, diagnosis, inspection, or repair on your car to know about what you are authorized to do on your car, what the correct and legal procedure is and what risks might be involved, also viewers are strongly advised to consult a licensed person before any sort of inspection or repair. Due to the factors beyond the control of “Automotive Diagnosis: Cars Repair & Training Guides”, we cannot guarantee against improper use of information or tools or systems, or the procedure provided. “Automotive Diagnosis: Cars Repair & Training Guides” disclaims any damage, injury or loss caused by your decision to follow the steps provided in this video.
You might be interested in watching the following video too:
CAN-BUS Step by Step Diagnosis | Resistance, Voltage, Short Circuit & Pin to Pin Diagnostic
ruclips.net/video/8p3EauD0ufg/видео.html
Very good simple explanation, easy to understand what to do even if more sensors on the network, thank you.
Glad you liked it!
Thank you sir, I am learning a lot from your videos
I’m glad videos are helpful
Nice video thanks for sharing
I’m glad you like it my friend
Thanks for the knowledge you are us, please keep it up God will reward you.
So nice of you
Great short sharp explanation. Thanks for sharing.
Thanks for watching
Спасибо большое
Все понятно и просто
Я сам занимаюсь диагностикой и иногда не понимал почему сигнал имел не понятную форму. 👍
Спасибо
Thanks for watching, I’m glad you liked it 👍
Super Bien, magnifique Mon Ami,
Mohsen❤❤
Thanks my friend ☺️
new to your channel, excellent info but just curious on the service that you use on the channel
Hi my friend, welcome to our channel.
You mean the service manual?
@@AutomotiveDiagnosis yes I am interested
I just use the companies workshop manuals, like for this car, I used KIA OEM scan tool (GDS) which comes with wiring diagrams and workshop manuals.
❤❤❤❤❤
👍👍👍👍
Lin bus diagnostics would be so much easier if the service data would state wether the data line is a pull up or pull down circuit design.
Please what about the once having four wire
4 Wire on the battery sensor you mean?
Good morning please the type of the diagnosis scan tool you are using
Hi my friend. This scan tool was Launch X431 Pro3
@@AutomotiveDiagnosis thanks please try and give us fuel trim video
@@ernestdamo677 Sure my friend
can you please explain....
Why why why???
Today's modern cars eg Toyota Glanza, Toyota Taisor, has 12V and then drops to 7V in the door close signal voltage.
Whereas, it used to be directly 12V when door closed and 0V when opened in old cars.
But today's cars has 12V at door closed, and after 20 seconds, it drops to constant 7V. When opening, it drops to 0V.
Why there's delay in dropping to 7V at door closed??
What's the significance of this 12V to 7V???
Please explain 😊