Excellent explanation and demonstration. Easily, one of the most powerful tools available for tone shaping, and it can be placed at different locations in the signal chain for different purposes. 👍😎
Would love to see you use this pedal to achieve some standard classic tones like treble booster, maybe QOTSA and especially a Dumble tone like David Lindley.
Fantastic demo. another question is where to use in the signal chain: pre-drive, post-drive or in the effects loop. Will all do different things. Tongue in cheek with all the pedals and all the effects out there, sometimes I just grab my tele and plug straight into an amp and just use the volume and tone knob on the guitar and don’t get too caught up with knobs. Haha.
I’m having trouble understanding the difference between low shelf and high pass filter, or between high shelf and low pass filter. And in particular, how those knobs are working on the empress. Are the LP/HP knobs, and the low/high shelf knobs moving the effect left and right on the frequency spectrum, or up and down for how much it is effecting?
Think of the HP/LP as a cut off - the knob determines what frequency the cut off starts (ie: a HP set at 80hz cut out everything below 80hz) A shelf on the Empress has a set frequency and you can cut or boost frequencies with the knob (the low shelf is set at 220 I believe so the knob cuts or boost frequencies below 220, with 12 o’clock being “flat” or no affect)
@@waitin4winter In case you or someone else reading this needs a visual example for the shelves, go to 4:18 in this video. The dots on the X axis (frequencies) are fixed on the ParaEQ at around those points. When you turn the knobs on the ParaEQ for shelving it raises and lowers the boost or cut amount, like when he raises and lowers things on the Y axis.
I second this question, especially for the MKII non deluxe. Looks like it requires 300mA as opposed to 85mA. No clue what the implications of this are.
This is easily the best video I've seen on paraeqs; the DAW visuals are super helpful!
Thanks! Glad it was helpful
Honestly one of the best overall explanations on what to do with EQ, how to use EQ to shape tone. Thank you!
Awesome! Glad it was helpful
Always seemed to get better results with parmetric EQ's over graphic. Great video and thorough explanation. Glad I found it.
Thank you! This is a terrific explanation of high pass, low pass, etc. I have unsuccessfully been trying to figure this out on my own for a while.
Thank you for making this video... It really really helps me a lot to understand EQ!❤
I've been trying to understand the specific frequencies to focus on. Thank you 👍
Excellent explanation and demonstration. Easily, one of the most powerful tools available for tone shaping, and it can be placed at different locations in the signal chain for different purposes. 👍😎
Absolutely!
The best explanation of EQ I have ever viewed!
Would love to see you use this pedal to achieve some standard classic tones like treble booster, maybe QOTSA and especially a Dumble tone like David Lindley.
Fantastic demo. another question is where to use in the signal chain: pre-drive, post-drive or in the effects loop. Will all do different things. Tongue in cheek with all the pedals and all the effects out there, sometimes I just grab my tele and plug straight into an amp and just use the volume and tone knob on the guitar and don’t get too caught up with knobs. Haha.
Really informative! Loved the part at 15:45 sounded ace 👍
This should have gotten way more comments.
Great video. Stellar information.
Thanks!
Great explanation/demo!
Thanks!
I’m having trouble understanding the difference between low shelf and high pass filter, or between high shelf and low pass filter. And in particular, how those knobs are working on the empress. Are the LP/HP knobs, and the low/high shelf knobs moving the effect left and right on the frequency spectrum, or up and down for how much it is effecting?
Think of the HP/LP as a cut off - the knob determines what frequency the cut off starts (ie: a HP set at 80hz cut out everything below 80hz) A shelf on the Empress has a set frequency and you can cut or boost frequencies with the knob (the low shelf is set at 220 I believe so the knob cuts or boost frequencies below 220, with 12 o’clock being “flat” or no affect)
@@MichaelWWestbrook that makes sense, thanks for responding 🙏
@@waitin4winter In case you or someone else reading this needs a visual example for the shelves, go to 4:18 in this video. The dots on the X axis (frequencies) are fixed on the ParaEQ at around those points. When you turn the knobs on the ParaEQ for shelving it raises and lowers the boost or cut amount, like when he raises and lowers things on the Y axis.
Excellent video! Thank you!
Fantastic!!!!
Is it worth upgrading MKI version? Thanks!
I second this question, especially for the MKII non deluxe. Looks like it requires 300mA as opposed to 85mA. No clue what the implications of this are.