One of my favorite things in this video was watching Ashley use a WormDrive Saw to break down the material , I’ve been using a Skil model 77 for over 35 years , at one point in my life I lived in a Condominium that had a4foot X 9 foot patio I had to utilize as a temporary Wood Shop when I worked at home everything I used had to be portable and easily stored in a small closet I didn’t have the ability to have a nice Cabinet table saw , large Jointer so therefore everything I built I used a Circular Saw and a Porter Cable Router that I did my Jointing with straight edges beleive it or not half of the fun of building Furniture. Under those conditions made it more fun for me I of course broke down all sheet goods with my Circular saw !
Subscribed yesterday and talk about a breath of fresh air. I’m up here at the Outer Banks, NC. It’s such a joy to see a lovely young lady following her craft and making dreams come true. Wishing you GREAT SUCCESS and looking forward to your next video ! Stay safe!
Just subscribed and I'm so glad I did. Retired finish trim carpenter and finally getting my shop set up. Love Ashley work, and look forward to her videos. Thanks for the inspiration Ashley..
Liked this. You have a very calming way of presenting too, which makes this all the more enjoyable. I know my Wife would love to learn wood turning from you. It’s just a shame that we’re in the UK. I’m going to continue to watch the other videos in this series. All the best.
Same here. I never think veneer as anything thicker than maybe a 16th of an inch. I guess 1/2 an inch still qualifies, though it is less than that after running through the thickness-planer.
@@thomasarussellsr I guess veneer is more about the application than the product. I suppose as long as it's a superficial covering, the thickness doesn't matter!
Looking good so far! Now you can get a plywood core with MDF outer layer with veneer on the outside. So it’s super smooth, strong like plywood, lightweight like plywood, smooth like MDF, stable like MDF (no waves). It’s a plywood composite hybrid.
Very nice production and editing; well done! I guess we will have to wait to see how the doors get assembled next week, but so far, the stuff that is being called veneer really isn't, based on industry and common practice definitions. 1/8th of an inch or thinner would be 'veneer'; if these boards stay at their current thickness, it really going to be more of a lamination than a veneer covering, and even if the panels are balanced (same (not) veneer on the front and back), at 97" tall, they are definitely going to want to move. Once wood is as thick as those panels, it starts to exert significant force on the substrate it is glued to as it gains and loses moisture seasonally, and it is a real challenge keeping a 97" panel flat in ANY type of construction. (We have four closet doors exactly that height, and double your width, in our house; BTDT...) At the very least, please use five evenly spaced hinges to hang the doors; that will help. Looking forward to the next installment!
You are so cute , and intimidating . The way you "man-handled" the boards and plywood during loading and unloading , wow ! your so strong. Miss Harwood , you are an amazing teacher and very cool to watch your videos. Thanks for sharing .
I love watching the two of you work so well together! For those not lucky enough to have reliable shop partner.... I make a small band saw power feeder in kit form (mine is usable on table saws and router tables too) that would make this kind of work much easier , providing steady feed as slow as you need. @
The walnut is so beautiful. It was kind of sad to see all those dark brown walnut shavings/sawdust being dumped in a waste bag. Isn't there something you could do with all that?
Ashley, I think it’s time for your own TV show! You have a great woodworking talent, on camera personality, and so many women are getting into the trades now...Your time has come to share your talent with the world! Love the videos! Good luck in all you do!
Dang, thought I was going to get the first comment for once.... Can't wait to see how the doors turn out ! Love the way you are expanding your artistry in wood to new adventures !
Hi Ashley, just stumbled across your channel, looks like a great project. Tell Charlie I have total tool envy for his workshop. I'm waiting to see how these doors turn out. P.S. mind your fingers on the table saw.
Put a bag in the dust bin with a bag holder sleeve. Put the sleeve in the empty bag, and pull it out before taking the full bag out. No mess, no fuss, no holding the barrel over your head, no dust flying in the air.
OK, Ashley. I saw that you had nice yellow push blocks to use on the jointer. Please use them for the table saw too. I know, you’re professional and all that. Thank you.
Just a heads up that dry lube has Teflon and will really mess up your wood finishing when time comes. I know of ikea production shops in the US that stopped production due to a tech using Teflon spray on a table saw and it messed their whole finishing process! Crazy.
I am left wondering if the thickness of the veneer is for the over-all thickness of the doors or to have some thickness to do some shaping/router work on the doors. Can't wait to find out on the next video. I love walnut for doors. I cant wait to see the finish popping out the detail of the wood grain. Best part of a project for me. P.S. Tell Charlie I have shop envy. Thanks
I am wondering the same thing -- because 1/2 or even 1/4 inch is not at all thin for a band saw (even for an amateur like me, 1/8 or 1/16 is easy to cut). Since they know what they are doing, I will assume the 1/2 is not just for door thickness or other unneeded "waste" of premium material.
My friend Ashley .. you have a beautiful, calm and strong personality .. And your videos are meaningful and useful always. You have a higher thumb .... Ali from Basra
Hope this is taken the way I mean for it to. I'm 65, retired in NC. I'm subscribed and have seen all your videos. I think compliments should be given when deserved, so I want to tell you you and your content is top notch, very professional! There's one thing I don't understand though...how a successful, beautiful, smart, energetic, successful and just smoking hot young lady you are is single! Maybe you're not but no ring. If I was 30 years younger, I'd be singing up for your classes. Love watching your channel, will follow you as long as I'm here!❤😷
Never thought about the repetition of it, your always looking at the surface and how it is going, but looking back your right the actions are repetitive, the results hope fully are but the patterns are ever changing. Tell you friend "nice shop" for me.
Ashley, watching you helping on power tools is absolutely terrifying. You ripping plywood on the table saw made me cringe. If your hand slipped, you were lined up for the blade. Yikes! Your jointer and bandsaw operations scared the hell out of me too. In terms of instructional video, you might want to work on a shop safety.
Yeah, I will agree I was a little nervous watching, but I've seen much worse on youtube. There is no need to put your fingers that close to the blade when ripping. She just needs some more practice and someone like Charlie to give her some hints.
Yes, that made me more than nervous and wondered why a woodworking teacher was allowing her to put herself at risk and where the table saw blade guard was...
@@stephenbezanson4633 , Well to be honest, a lot of us don't use any guard on the table saw ever. I have made a living as a woodworker for over 35 years and counting. At 70 years of age I have to be extra careful, always thinking where my hands are and the stability of the piece I'm cutting. I don't take any chances with strange setups. I often have my hands close to the blade, but never behind it or certainly never in front.
@@tomruth9487 I don't use a guard on the table saw either but I have a strict set of strategies to keep my hands clear of the blade. I was put to work at the age of 13 in my brother's shop and 45 years later have had no major accidents. That's because my brother taught me strategies that I still use to this day. I'm not meaning to come down heavy on Ashley. She scared me and I think she should consider being careful to demonstrate safe practices in her videos. A person's life can change in an instant from one false move. Nuff said.
@@jonmars9559 Yes, I agree with you 100%. I have contacted others on youtube videos for the same reason and they have responded to me in a very positive manor. Not wanting to come down on anyone as we are all still learning, trying to get better and staying safe.
Ashley what is the point of having a dust extractor that you have to then empty the bags into something else and you are breathing in all the dust and obviously the bits that come out of it went into your eye, it would be better to have a plastic bag inside the top that he was using so all you had to do was pull the plastic bag out or just fit a plastic bag around the dust extractor so all you do is carry the plastic bag out and not have to empty it . Whenever there is dust you should be wearing mask
Yes Jon, but the hearing and eyesight protection was there, which on so many videos is not. Also, camera angles are important and sometimes misleading, but I agree, maybe a word or two about safety would be beneficial. I know I would appreciate it.
seems lime a lot of wasted material, you dont need half inch veneers to do a door, id use half that thickness and run it through a drum sander after every pass.
I'm surprised to see 1/2" veneers. I was expecting 1/8". However if you want 1-3/4" doors then two 1/2" veneers plus 3/4" plywood will get you there, or at least close.
This a looking to be a beautiful build. Would it have been easier to use walnut veneered plywood? Seems like from everything I’ve heard that the walnut veneers will have movement in it?
![Diggy Graves - Red Vineyard [Official Lyric Video]](http://i.ytimg.com/vi/8Ro085T0mnQ/mqdefault.jpg)
I love your balance of narration, following work, and real time audio. The production is a joy to watch.
Ashley...you are a patient listener....and absolutely adorable...please keep posting...everything you are building is very interesting.
One of my favorite things in this video was watching Ashley use a WormDrive Saw to break down the material , I’ve been using a Skil model 77 for over 35 years , at one point in my life I lived in a Condominium that had a4foot X 9 foot patio I had to utilize as a temporary Wood Shop when I worked at home everything I used had to be portable and easily stored in a small closet I didn’t have the ability to have a nice Cabinet table saw , large Jointer so therefore everything I built I used a Circular Saw and a Porter Cable Router that I did my Jointing with straight edges beleive it or not half of the fun of building Furniture. Under those conditions made it more fun for me I of course broke down all sheet goods with my Circular saw !
Subscribed yesterday and talk about a breath of fresh air. I’m up here at the Outer Banks, NC. It’s such a joy to see a lovely young lady following her craft and making dreams come true. Wishing you GREAT SUCCESS and looking forward to your next video ! Stay safe!
Beautiful lady doing beautiful work. Way to go Ashley
Just subscribed and I'm so glad I did. Retired finish trim carpenter and finally getting my shop set up. Love Ashley work, and look forward to her videos. Thanks for the inspiration Ashley..
Liked this. You have a very calming way of presenting too, which makes this all the more enjoyable. I know my Wife would love to learn wood turning from you. It’s just a shame that we’re in the UK. I’m going to continue to watch the other videos in this series. All the best.
Looking forward to seeing how this turns out! I was expecting paper thin veneer, this looks much more substantial. Thanks for sharing the process!
Same here. I never think veneer as anything thicker than maybe a 16th of an inch. I guess 1/2 an inch still qualifies, though it is less than that after running through the thickness-planer.
@@thomasarussellsr I guess veneer is more about the application than the product. I suppose as long as it's a superficial covering, the thickness doesn't matter!
Came for the skill and expertise. Stayed for the skill, expertise and SMILE!
I like your videos: you have a pleasing way about you and it shows up in your videos. Keep doing what you're doing.
What a lovely video Ashley I really enjoyed that and I can’t wait for part 2. Plus I love Charlie‘s workshop👍🏼
Charlie! He’s one of my favorite folks in this community and is such a talented woodworker. Great to see him on here!
Haha! Thanks puddin"
Wow, can't wait to see the finished product!
Awesome work Ashley! 😃👍🏻👊🏻 .... Looking forward to the next video!
HI Ashley those doors r going to b super cool. love walnut wood.
Those are going to be nice looking doors! Can't wait to see them.
Great Video, I really liked the way that walnut looked. Those doors are going to look gorgeous. Looking forward to see the rest.
Walnut is going to be beautiful Ashley !
Wonderful as always!
That is an awesome bandsaw!!! Those were some pretty straight cuts!!
Looking forward to seeing how this turns out! Stay safe!👍❤️
Looks great, can't wait for the finished product. Thanks for sharing, be safe! Beach, NC
Great video Ashley, loving what you do 👍🙏👍 x
Looking good so far! Now you can get a plywood core with MDF outer layer with veneer on the outside. So it’s super smooth, strong like plywood, lightweight like plywood, smooth like MDF, stable like MDF (no waves). It’s a plywood composite hybrid.
Interesting video Ashley, keep um comin, Stay Safe and Thank's for the share !!!.
Can't wait to see the finished product. You're adorable Ashley.
Peace and love, Tim
Very Good..and I saw the new shed. A+
Very nice production and editing; well done! I guess we will have to wait to see how the doors get assembled next week, but so far, the stuff that is being called veneer really isn't, based on industry and common practice definitions. 1/8th of an inch or thinner would be 'veneer'; if these boards stay at their current thickness, it really going to be more of a lamination than a veneer covering, and even if the panels are balanced (same (not) veneer on the front and back), at 97" tall, they are definitely going to want to move. Once wood is as thick as those panels, it starts to exert significant force on the substrate it is glued to as it gains and loses moisture seasonally, and it is a real challenge keeping a 97" panel flat in ANY type of construction. (We have four closet doors exactly that height, and double your width, in our house; BTDT...) At the very least, please use five evenly spaced hinges to hang the doors; that will help. Looking forward to the next installment!
Hi Ashley, I from Argentina....and your videos is amazing and your jobs, the this videos, congratulations Ashley
Cracking job done on your wood for the doors.
Love your work. Keep it up
You are so cute , and intimidating . The way you "man-handled" the boards and plywood during loading and unloading , wow ! your so strong. Miss Harwood , you are an amazing teacher and very cool to watch your videos. Thanks for sharing .
Loved the video Ashely, oh and I trust you to use the tools correctly. Your experience shows (thumbs up emoji) :-)
Strong Ashley you are!
That was so cool, never seen that done, extremely interesting process, can't wait for the next chapter, thanks for sharing
Ashley, I'm a fan of yours and also a wood turner. Your lack of safety in this video is anything but 'professional'
I love watching the two of you work so well together! For those not lucky enough to have reliable shop partner....
I make a small band saw power feeder in kit form (mine is usable on table saws and router tables too) that would make this kind of work much easier , providing steady feed as slow as you need.
@
Never seen a 1 on like after I clicked “LIKE”. Always love Walnut, probably my favorite. Can’t wait to see the end product.
The walnut is so beautiful. It was kind of sad to see all those dark brown walnut shavings/sawdust being dumped in a waste bag. Isn't there something you could do with all that?
You looked really comfortable using potentially scary tools that you don't use often, Great Job!
Ashley you scared me a bit when it looked like your hands got close to the table saw blade, but it could have been the camera angle.
Ashley, I think it’s time for your own TV show! You have a great woodworking talent, on camera personality, and so many women are getting into the trades now...Your time has come to share your talent with the world! Love the videos! Good luck in all you do!
Charlie!!! Looking good, my friend. Miss you guys in SC -- will be down for a visit next year. Maybe.
Dang, thought I was going to get the first comment for once....
Can't wait to see how the doors turn out !
Love the way you are expanding your artistry in wood to new adventures !
Hi Ashley, just stumbled across your channel, looks like a great project. Tell Charlie I have total tool envy for his workshop. I'm waiting to see how these doors turn out. P.S. mind your fingers on the table saw.
Hi Ashley and yes of course gloves ones that fit quite snuggly around your pretty little hands
Put a bag in the dust bin with a bag holder sleeve. Put the sleeve in the empty bag, and pull it out before taking the full bag out. No mess, no fuss, no holding the barrel over your head, no dust flying in the air.
OK, Ashley. I saw that you had nice yellow push blocks to use on the jointer. Please use them for the table saw too. I know, you’re professional and all that. Thank you.
Just a heads up that dry lube has Teflon and will really mess up your wood finishing when time comes. I know of ikea production shops in the US that stopped production due to a tech using Teflon spray on a table saw and it messed their whole finishing process! Crazy.
You were really scaring me using that table saw Ashley.
Very nice. Thank you.
That looks beautiful and I really love to have some of that
Wait...is this showbiz? Great video nice lady, looking forward to seeing the rest, cheers!
I am left wondering if the thickness of the veneer is for the over-all thickness of the doors or to have some thickness to do some shaping/router work on the doors. Can't wait to find out on the next video. I love walnut for doors. I cant wait to see the finish popping out the detail of the wood grain. Best part of a project for me.
P.S. Tell Charlie I have shop envy.
Thanks
I am wondering the same thing -- because 1/2 or even 1/4 inch is not at all thin for a band saw (even for an amateur like me, 1/8 or 1/16 is easy to cut).
Since they know what they are doing, I will assume the 1/2 is not just for door thickness or other unneeded "waste" of premium material.
Beautiful work! Beautiful girl!
You are absolutely amazing
Oh my. You are gorgeous 😍 💖 and talented. Love your videos!
All that walnut .... I see lots and lots of acoustic guitar backs and electric guitar tops. :D
Charlie you’re the coolest person I know
My friend Ashley .. you have a beautiful, calm and strong personality .. And your videos are meaningful and useful always. You have a higher thumb .... Ali from Basra
Nice work,👍
Super interesting, thank you!
Seems pretty thick for the plywood to stabilize them. Those can make the plywood bend and cup a loot
Great Job congratulaciones
The Kristen Wiig of wood working
watch that hand placement on the table saw....
There always seems to be a problem with guarding. The ex factory machine has the guard provided so why not use it!
Great video..... subscribed.....
you can get those one time use eye flush kits to have on hand.
They need to go to the home center and pick up some red rubber cement trowels for the jointer and even table saw for sheet goods.
excellent vidéo.Thank you Ashley. Lionel de french.
Still subscribed.
Love your work! How do I find out about upcoming classes in the spring?
Im a wood working nerd... How do I get my Daughters into woodworking?
Any chance you would be teaching anywhere near Orlando soon?
Hope this is taken the way I mean for it to. I'm 65, retired in NC. I'm subscribed and have seen all your videos. I think compliments should be given when deserved, so I want to tell you you and your content is top notch, very professional! There's one thing I don't understand though...how a successful, beautiful, smart, energetic, successful and just smoking hot young lady you are is single! Maybe you're not but no ring. If I was 30 years younger, I'd be singing up for your classes. Love watching your channel, will follow you as long as I'm here!❤😷
How come John Heisz never gets comments like this?
KarlBunker - Well...... He is funny! But “smoking” is a stretch!
Toujours du beau travaille
Faudrai trouvé une alternative àu bois à l'avenir 😊
Never thought about the repetition of it, your always looking at the surface and how it is going, but looking back your right the actions are repetitive, the results hope fully are but the patterns are ever changing. Tell you friend "nice shop" for me.
Do you know what brand of carbide blade he is using?
Ashley, watching you helping on power tools is absolutely terrifying. You ripping plywood on the table saw made me cringe. If your hand slipped, you were lined up for the blade. Yikes! Your jointer and bandsaw operations scared the hell out of me too. In terms of instructional video, you might want to work on a shop safety.
Yeah, I will agree I was a little nervous watching, but I've seen much worse on youtube. There is no need to put your fingers that close to the blade when ripping. She just needs some more practice and someone like Charlie to give her some hints.
Yes, that made me more than nervous and wondered why a woodworking teacher was allowing her to put herself at risk and where the table saw blade guard was...
@@stephenbezanson4633 , Well to be honest, a lot of us don't use any guard on the table saw ever. I have made a living as a woodworker for over 35 years and counting. At 70 years of age I have to be extra careful, always thinking where my hands are and the stability of the piece I'm cutting. I don't take any chances with strange setups. I often have my hands close to the blade, but never behind it or certainly never in front.
@@tomruth9487 I don't use a guard on the table saw either but I have a strict set of strategies to keep my hands clear of the blade. I was put to work at the age of 13 in my brother's shop and 45 years later have had no major accidents. That's because my brother taught me strategies that I still use to this day. I'm not meaning to come down heavy on Ashley. She scared me and I think she should consider being careful to demonstrate safe practices in her videos. A person's life can change in an instant from one false move. Nuff said.
@@jonmars9559 Yes, I agree with you 100%. I have contacted others on youtube videos for the same reason and they have responded to me in a very positive manor. Not wanting to come down on anyone as we are all still learning, trying to get better and staying safe.
Wounder full as always I like to watch ur work
In Arabic فنانة fanana
Ashley what is the point of having a dust extractor that you have to then empty the bags into something else and you are breathing in all the dust and obviously the bits that come out of it went into your eye, it would be better to have a plastic bag inside the top that he was using so all you had to do was pull the plastic bag out or just fit a plastic bag around the dust extractor so all you do is carry the plastic bag out and not have to empty it . Whenever there is dust you should be wearing mask
And eye protection.
And hearing protection, especially a tool with a circular blade.
Your fence on the planer should be set so that there is no cutter head visible wider than your workpiece !
Yes Jon, but the hearing and eyesight protection was there, which on so many videos is not. Also, camera angles are important and sometimes misleading, but I agree, maybe a word or two about safety would be beneficial. I know I would appreciate it.
That is totally me, "I got something in my eye" while wearing safety glasses on my head.
seems lime a lot of wasted material, you dont need half inch veneers to do a door, id use half that thickness and run it through a drum sander after every pass.
I liked your video
Good
Nice job, be careful With the dust also for your lungs. It’s very dangerous.
Take care and go on.
I'm surprised to see 1/2" veneers. I was expecting 1/8". However if you want 1-3/4" doors then two 1/2" veneers plus 3/4" plywood will get you there, or at least close.
This a looking to be a beautiful build. Would it have been easier to use walnut veneered plywood? Seems like from everything I’ve heard that the walnut veneers will have movement in it?
Where are your dust masks?
Fun fact: "Gopher Wood" is "plywood", and Noah made the Ark of it.
safety glasses don't do any good on top of your head
Cedar strip canoe or kayak
👍🤗😶🖐
Wow not good workshop safety @6:32 especially when there are no other safety features in place
👍🌹🌹🌹💞
I wonder the comments is she was dressed properly
Ashley; I'm in love with you
🇷🇺👍👍👍👍👍
Did she really say "Char-els-ton" instead of "Charles-ton"?!?...............................rj
One of the most beautiful women ever
Thank God for tank tops!