Hi , we follow you, we wanted to know if you could upload the link to download the software (Networking USB Server) we are interested in connecting a HDD to the USB port server , on the manufacturer's website and no longer has the software. Thanks for your help..!!
Because I wasted hours on this, if you have problems where the printer isn't printing, change the print mode to LPR mode. Windows 11 defaults to RAW mode which wont work for a lot of older printers.
Hi thanks for the video. I know this was asked but wondering if you've found a alternative to use on Mac OS. I was looking to do this exact setup with my thermal printer, but haven't had much luck. I'm hoping to connect this label printer to the network so it's available to print to from multiple computers in the house. Thanks!
WL-NU72P11. The server does not work in conjunction with the printer HP LaserJet Professional P1566. I'm trying to set up the server using the Launch Network Printer Wizard. At step 02:37 the Wizard reports - "No network printer is available" and i can't go on with the setup. The print server is on at the time of setup, it is connected to the local network and I can view the print server settings web page. How to solve the issue with the message "No network printer is available" in the process of setting up the print server?
sir, i connect this to my printers, Epson LQ310 and L120 but it takes very long time to print. after i click print, it will hang there for about 1 min then it will start printing. does yours the same too?
I didn't notice long delays like that, but I think the delay can be caused by a number of factors including the strength of the signal, particular device you are using and how it handles network communications, and the size of the documents you are trying to print e.g. how much data is sent over the network. It's not possible for me to pin point the exact cause of your issue, but it sounds like the device is working, just slower than you would like.
Yes, you'll just need to plug the Canon G2010 into the print server using a USB 2.0 cable, then setup the print server as shown in the video with the printer's driver. When printing, be sure to select the print server as the print destination and it will pass on your documents to the connected printer to print.
Hello.. information video is very helpful. Can you help me? I saw that you are using your laptop to print. Do you have ideas if it will work if i use any tablet?
Hi, just bought this device. Would like to ask for this device, it should not having any issue if its on for more than 24hours right? Because im using it for office environment so would use in a long period
Hi Phil, I got this USB server after I saw your video. I am having trouble printing multiple copies of a document, it causes a printing error. Got any tips on how to fix my issue?
Hm, it may be an issue with one of the settings called "Mopier Mode" which translates the command to control how many copies of the print job need to be sent to the printer. You may need to disable this setting. How to change this setting will vary by printer brand and model though, so if you need specific instruction on how to do that for your printer a Google search for your printer model and How to Disable Mopier Mode may solve your problem!
can this units usb end be connected to a powered usb 2.0 hub and can multiple usb devices be connnected to the hub and will they be discoverable and useable ?? kindly do revert back
i have a problem with that wavlink the connection is to slow even they are connect ted on one swithc hub can you help me whit that problem it takes much time before they can print
You would need to make sure the print server and your phone are connected to the same WiFi network, then initiate the print from your phone. The print server should show up as an available network printer.
I just bought Wavlink Network USB 2.0 Server (I get it for PRINTER) I have Epson L1300 Model printer. I done all my setups at my Windows 10 Computer. Here is my problem: When i print something printer not always working. It prints % 50 chance and print after 1-2 minute. It works very slow. How can i solve?
I don't know if there's a complete compatibility list posted anywhere, but I think if you reach out to Wavlink, contact@wavlink.com, they should be able to confirm for you.
I Already buy this product.. but the problem is when I try to print the image file.. only 1/4 of the picture print at the printer.. dont know the problem is
Hm, try changing the print setting to "fit to page" when printing, and sure it's set to "portrait" orientation and not landscape. Hope these suggestions can help!
No, the device itself does not have a WiFi antenna to broadcast or receive a wireless signal. It communicates with the printer over the USB connection and to other devices on your network through the Ethernet/LAN connection to your router.
The server itself is not wireless and still must be connected via Ethernet to your WiFi router. However, once connected, then you can access the printer connected to the adapter via USB from devices wirelessly connected to the router.
hello my print server WAVLINK is very slow (nu78m41) I am using the latest version of the driver with windows 10, my printer is an epson L300, can someone help me please
At least on Android, I wasn't able to find a print service compatible with the server that would allow my phone to use the LPR protocol to print from my phone over WiFi. There might be a paid app out there that can do this, but I only tried with free apps and couldn't get it to work.
anyone can confirm using this print server to share an old USB printer/scanner will resolve/overcome the issue of not being able to print after installing the latest PrinterNightmare bug fixed by Microsoft ?
Good night, I need to send print by the command line dos. examples: \\192.168.10.0\lp lp1 , lp2. or dir > prn, or type > prn, we use firebird 2.55. can we change the print queue name after the ip? example2: PRINT filename.txt /D: \\192.168.0.10\lp1, dir > prn \\192.168.0.10\lp1 type > prn \\192.168.0.10\lp*, lp1,lp2.
I was looking for this for a while, thanks.
thanks for the nice review/info
You bet
Is pc required all the time. While the ethernet is connected to active router with internet, will this work when PC is off? Or Pc is always required?
Great , helpful video. Thanks
I like this server. What add-on do I need to access my home usb-only printer from somewhere else (from outside home network)?
Does this work for USB cameras too and does it convert them to IP cameras with possiblility to view as RTSP?
No, this device is specific to printers because of the protocols used to open the ports.
Hi , we follow you, we wanted to know if you could upload the link to download the software (Networking USB Server) we are interested in connecting a HDD to the USB port server , on the manufacturer's website and no longer has the software. Thanks for your help..!!
The link to the download page is in the video description and the print server driver can be found at the bottom of the page.
Because I wasted hours on this, if you have problems where the printer isn't printing, change the print mode to LPR mode. Windows 11 defaults to RAW mode which wont work for a lot of older printers.
No need to say "What's up guys." Otherwise, nice informative, well presented video!
😆
" This is the AC port"
Next minute :
Dead
thanks so much.
Hi thanks for the video. I know this was asked but wondering if you've found a alternative to use on Mac OS. I was looking to do this exact setup with my thermal printer, but haven't had much luck. I'm hoping to connect this label printer to the network so it's available to print to from multiple computers in the house. Thanks!
Sorry, I don't have any Mac devices, so I'm not sure.
WL-NU72P11. The server does not work in conjunction with the printer HP LaserJet Professional P1566. I'm trying to set up the server using the Launch Network Printer Wizard. At step 02:37 the Wizard reports - "No network printer is available" and i can't go on with the setup. The print server is on at the time of setup, it is connected to the local network and I can view the print server settings web page. How to solve the issue with the message "No network printer is available" in the process of setting up the print server?
hi bro, i have a same problem here, can you tell me how do you fix it?
Will this work if you plug into a switch? No internet.
Yes, internet is not required for the device to work. It simply gives a non-networked printer access to a local area network (LAN) via USB.
I purchased. But fails to render if a model of printer is not supported. Can I add support for a specific printer?
sir, i connect this to my printers, Epson LQ310 and L120 but it takes very long time to print.
after i click print, it will hang there for about 1 min then it will start printing. does yours the same too?
I didn't notice long delays like that, but I think the delay can be caused by a number of factors including the strength of the signal, particular device you are using and how it handles network communications, and the size of the documents you are trying to print e.g. how much data is sent over the network. It's not possible for me to pin point the exact cause of your issue, but it sounds like the device is working, just slower than you would like.
@@ReviewedByPhil really? i had to wait 1min for each print even if it is just "ABC" on a notepad app. i guess mine was faulty then
possible to connect to canon G2010?
Yes, you'll just need to plug the Canon G2010 into the print server using a USB 2.0 cable, then setup the print server as shown in the video with the printer's driver. When printing, be sure to select the print server as the print destination and it will pass on your documents to the connected printer to print.
Hello.. information video is very helpful. Can you help me? I saw that you are using your laptop to print. Do you have ideas if it will work if i use any tablet?
Hi, just bought this device. Would like to ask for this device, it should not having any issue if its on for more than 24hours right? Because im using it for office environment so would use in a long period
Do you need an actual "server" for this to work?
No, the device acts as the server with the PCs on the network as the clients.
Can I use my phone to print wireless? :)
Can you plug in a usb hub and use more than one device at a time? Such as 2 printers.
No, I don't think it would support that as there's no software that would allow you to "choose" which printer to assign the print job to.
how to run a usb printer which is not close to the router?
Does it support canon LBP6030 model ?
Phil are you still using the Irestore?
Is this also compatible with Mac OS? Similarly, will this work if I need to print via my mobile phone? thanks Phil.
I don't think you can do either of these, though I'm not really sure of that.
Can I ask if it supports printing over the phone, in the same LAN?
This is what I want to know
does two-sided printing work?
Yes
Hi Phil, I got this USB server after I saw your video. I am having trouble printing multiple copies of a document, it causes a printing error. Got any tips on how to fix my issue?
Hm, it may be an issue with one of the settings called "Mopier Mode" which translates the command to control how many copies of the print job need to be sent to the printer. You may need to disable this setting. How to change this setting will vary by printer brand and model though, so if you need specific instruction on how to do that for your printer a Google search for your printer model and How to Disable Mopier Mode may solve your problem!
Here's how to configure the print server ruclips.net/video/WSiav3mMAKg/видео.html
so a regular ethernet usb will not work?
Will it work for HP laserjet 1020 plus
Does this device work with non FDM 3D printers ?
Does it work on a mac too?
Hm, I haven't seen a driver for it for a Mac, so I'm not sure if there's a way to make the PC driver compatible.
can this units usb end be connected to a powered usb 2.0 hub and can multiple usb devices be connnected to the hub and will they be discoverable and useable ?? kindly do revert back
No, this adapter supports only 1 printer at a time and a hub cannot be connected to its downstream USB port.
Would this device work with with a GraphTech Cutter / plotter?
i have a problem with that wavlink the connection is to slow even they are connect ted on one swithc hub can you help me whit that problem
it takes much time before they can print
same with me
can we assign a static ip to the printer or wavlink LRP
If i want to print from my phone how do I connect to it on the network
You would need to make sure the print server and your phone are connected to the same WiFi network, then initiate the print from your phone. The print server should show up as an available network printer.
Its able to connect multiple printer?
I just bought Wavlink Network USB 2.0 Server (I get it for PRINTER) I have Epson L1300 Model printer. I done all my setups at my Windows 10 Computer. Here is my problem: When i print something printer not always working. It prints % 50 chance and print after 1-2 minute. It works very slow. How can i solve?
Hm, I'm not sure. I haven't encountered this issue with mine. You might want to reach out to Wavlink for support with that.
Can we print to this from ipad?
Printer Compatibility List?HPnerverstop 1200a?
I don't know if there's a complete compatibility list posted anywhere, but I think if you reach out to Wavlink, contact@wavlink.com, they should be able to confirm for you.
Is it accessible on android?
Can you connect APC UPS to this device?
As the power source? I don't see why not.
@@ReviewedByPhil No, to connect the NUT server and to poweroff the VM in proxmox.
Hi Phil, good morning.
Is it compatible to LBP 6000 Canon printer
Sorry, I'm not sure. You'll have to reach out to Wavlink for clarification.
I Already buy this product.. but the problem is when I try to print the image file.. only 1/4 of the picture print at the printer.. dont know the problem is
Hm, try changing the print setting to "fit to page" when printing, and sure it's set to "portrait" orientation and not landscape. Hope these suggestions can help!
Can you use multiple print servers with different brand printers
when you press the print it will hang for few secs
Can this solution act as an alternative to "google cloud print", print directly to printers without needs to any pc as intermediator?
Would this work with an old USB 2.0 HP J4580 printer without a hardwire Ethernet connection? i e 100% wireless?
No, the device itself does not have a WiFi antenna to broadcast or receive a wireless signal. It communicates with the printer over the USB connection and to other devices on your network through the Ethernet/LAN connection to your router.
Is this compatible with windows 11
Wifi to USB 2.0 print server?
The server itself is not wireless and still must be connected via Ethernet to your WiFi router. However, once connected, then you can access the printer connected to the adapter via USB from devices wirelessly connected to the router.
funciona para el macbook air? . si es así . como se instala?
Lo siento, no estoy seguro. No veo que haya un controlador para Mac en el sitio
hello my print server WAVLINK is very slow (nu78m41)
I am using the latest version of the driver with windows 10, my printer is an epson L300, can someone help me please
can use on win 10?
Yes
I need software for usb 2.0 print server ..send me software download link
can i also use my phone to print via wifi?
At least on Android, I wasn't able to find a print service compatible with the server that would allow my phone to use the LPR protocol to print from my phone over WiFi. There might be a paid app out there that can do this, but I only tried with free apps and couldn't get it to work.
superbueno
thank you
anyone can confirm using this print server to share an old USB printer/scanner will resolve/overcome the issue of not being able to print after installing the latest PrinterNightmare bug fixed by Microsoft ?
Good night, I need to send print by the command line dos. examples:
\\192.168.10.0\lp lp1 , lp2. or dir > prn, or type > prn, we use firebird 2.55. can we change the print queue name after the ip? example2:
PRINT filename.txt /D: \\192.168.0.10\lp1,
dir > prn \\192.168.0.10\lp1
type > prn \\192.168.0.10\lp*, lp1,lp2.
can you print from your iphone or android remotely?
I don't think you can, though I'm not really sure of that.
this model support or not with win11
Yes, you can use this device with Win11