How to Replace Neutral Safety Switch 2001-2005 Ford Explorer Sport Trac

Buy Now!
New Neutral Safety Switch from 1AAuto.com 1aau.to/ic/1AZNS00012
This video shows you how to install a neutral safety switch on your 2001-2005 Ford Explorer Sport Trac. The neutral safety switch is a safety device that does not let your vehicle's engine start unless the transmission is in neutral. If the switch is malfunctioning, or failed, you may not be able to start your vehicle!
This process should be similar on the following vehicles:
2001 Ford Explorer Sport Trac
2002 Ford Explorer Sport Trac
2003 Ford Explorer Sport Trac
2004 Ford Explorer Sport Trac
2005 Ford Explorer Sport Trac
Tools you will need:
• Flat Blade Screwdriver 1aau.to/od/1AXAA00013
• Pry Bar 1aau.to/ob/1AXAA00020
• 21mm wrench
• 18mm Socket 1aau.to/oa/1AXAA00043
• Pliers
• Torque Wrench 1aau.to/oa/1AXAA00044
• Dielectric Grease
• Hammer 1aau.to/oa/1AXAA00091
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@snower7648]

Have you guys done a video on how to remove a 2000 f250 steering column because I would love to know how because mine is broken

[@kandicealkire20]

97 explorer does it need to be jacked up to reach the nss?

[@Taurenpie]

Eyeball engineering is not the correct way to install this part. There is a set of alignment marks you must line up while the trans is in the neutral position , these marks are seen at 5:06 and some how you never even say a word about them. They are there for a reason and if they are not used you will likely be creating more problems than you had to began with.

[@tulumexpertrealty]

Great vid thanks man. Followed it and replaced my switch and started first time.

[@user-go7ph4jv6e]

For a ram 1500 mod. 2012 4x4?

[@user-bf1de6gm7f]

THANK YOU THANK YOU THANK YOU

[@TRQ]

+James Brown Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@carloseloydiaz1035]

Cómo cambio la uña que agarra el pare neutro dentro de la caja

[@justinharrod4495]

What if the shaft spends

[@user-zm8mv7mv2u]

DO NOT FOLLOW THIS VIDEO. CAR MUST BE IN NEUTRAL AND NEUTRAL LINES MARKED