This is open exhaust right after I got running and about 1200 rpm. I will install the exhaust with the flowmasters but plan to try something like the magnaflow
@@bicylindrico will be interesting to hear how it sounds with either of those mufflers. I believe you have seen my vids with my sons E55 with the race IQ cams. They sound great but no specs on them.
@@robertlambert5299 I am still waiting on the intake manifold adapters that were part of the build. I needed to get the engine installed and out of the shop in one weekend so installing the old intake made that happen. I am holding off on the tune until the new intake is installed and then will make a video with the exhaust. I am starting to lean towards Borla though on this build
The sound says what the engine is doing and it feels completely different than it ever has before. It has been a ton of work also its has been a great experience building this engine. Lots of bang for the buck compared to building other cars
@@fredrikmyrsta2616 I had to cut valve reliefs especially for the intakes. If I had to do it over again, I would reduce the intake lift/duration for this reason. The exhaust is fine on a 108 lobe centerline
@@bicylindrico Sound great I know that place I used work for schnider as semi truck driver supply all walmart stores around the area... I just left the country after the last thanksgiving. I should get back next couples month. What you are doing is amazing . I do have mercedes w124 1992 now, after off from mercedes almost 10 years, used have v12 1992 cl and also 1991, 560SEC and then 2003 c500...still have engine and transmission for 2003 c500 .. I been looking around how to get off from the stander injection feul system to one of these you customizen injection system you have in video. Is that possible? Can we fet one of this into v6 ?
Great update and loving the sound! Doesn't quite sound like anything else.
This is open exhaust right after I got running and about 1200 rpm. I will install the exhaust with the flowmasters but plan to try something like the magnaflow
@@bicylindrico will be interesting to hear how it sounds with either of those mufflers. I believe you have seen my vids with my sons E55 with the race IQ cams. They sound great but no specs on them.
@@robertlambert5299 I am still waiting on the intake manifold adapters that were part of the build. I needed to get the engine installed and out of the shop in one weekend so installing the old intake made that happen. I am holding off on the tune until the new intake is installed and then will make a video with the exhaust. I am starting to lean towards Borla though on this build
@@bicylindrico sounds good keep us posted on your progress.
Excellent work. Where did you find carburated intake manifold.
I worked with a machine shop to have CNC'd intake adapters made
I can now mount any variant made for the 351C. Carb, standard fuel injection, stack injection, Weber stacks, 6-71 blower, tunnel ram. etc
Do you test this cams? Can do a custom grind for an M112 ???
Catcams may sell camshafts for the M112
I cant wait to get my catcams i love the sound
The sound says what the engine is doing and it feels completely different than it ever has before. It has been a ton of work also its has been a great experience building this engine. Lots of bang for the buck compared to building other cars
@@bicylindrico how is the clearance to the pistons ?
@@fredrikmyrsta2616 I had to cut valve reliefs especially for the intakes. If I had to do it over again, I would reduce the intake lift/duration for this reason. The exhaust is fine on a 108 lobe centerline
Sir, where is your shop located?
Central Ohio
You must be kidding me, Im living in bellbrook Ohio, where in Central?
@@helmialmsuire2861 Just northeast of Columbus. I do 'classic' MB work as a small one man shop.
@@bicylindrico
Sound great I know that place I used work for schnider as semi truck driver supply all walmart stores around the area... I just left the country after the last thanksgiving. I should get back next couples month. What you are doing is amazing . I do have mercedes w124 1992 now, after off from mercedes almost 10 years, used have v12 1992 cl and also 1991, 560SEC and then 2003 c500...still have engine and transmission for 2003 c500 .. I been looking around how to get off from the stander injection feul system to one of these you customizen injection system you have in video. Is that possible? Can we fet one of this into v6 ?
@@bicylindrico small !!! You got awesome man shop sir.