How To Add Volt & Amp Meter Upgrade for Custom E-Bikes

In this video, I demonstrate my process to make this e-bike amp & volt meter. This is an excellent upgrade if you want to view the exact voltage of your battery as well as your current draw. I am installing this on an e-bike build that I made from my existing mountain bike using the NBPower 3000w Hub Motor kit. Below is all the material I use:
3d Printable Bracket: github.com/xDi...
Amp Volt Meter w/ Hall Sensor 100A max: www.amazon.com...
404pcs countersunk Head Screws with Nose Screw Set M3 M4 M5 Screw and nut washers: www.aliexpress...
1/8" Neoprene Rubber Strip: a.co/d/8RMSFyh
Common Parts: Anderson Connectors, 6 AWG Wire, 18 AWG Wire, Heat Shrink, Split Wire Loom
If you have any questions, please reach out via the comment section!

[@acroduster]

If your custom ebike build selected and used a decent vfd or speed control rather than chinesium junk these features would already be inside and usable, try looking into vesc or phase runners or any other decent speed control solution and stop adding extra wires and needless tricky tacky silly add one to get what a well built bike would already have kinda guessing I would not want a bike you built!