Change the Alternator on a 5.4L or 4.6L Ford V8
HTML-код
- Опубликовано: 27 авг 2024
- IMPORTANT NOTE: Before you buy your replacement alternator - check to see if your original alternator has a 6-groove or an 8-groove pulley (see 12:15 in the video). Replace the Alternator on a Ford Triton 5.4 or 4.6 V8 engine. No matter what vehicle these engines are in, all installations are nearly the same. Learn to change the alternator on a 5.4L or 4.6L Ford engine. In this video, I change the alternator on a 2003 Ford F150 5.4L V8. The procedure is almost exactly the same for any 5.4L or 4.6L Ford V8.
Tools I use in my shop:
RHINO RAMPS used in the video: amzn.to/3pDcRtD
3-TON FLOOR JACK: amzn.to/3w0JQKx
MITER SAW: DeWalt DWS779S amzn.to/2K7Su5x
PLANER: Porter Cable PC-305TP amzn.to/2WoHT8j
DUST COLLECTOR: JET DC-650 amzn.to/2I4tOZA
BISCUIT JOINER: Porter Cable 557 Plate Joiner amzn.to/2IrCiJj
ROUTERS: Bosch 1617EVSPK 2.25hp amzn.to/2WwGCkb
Makita Compact 1-1/4hp Router RT0701C amzn.to/3zZ1Hnk
CORDLESS DRILL and DRIVER: BOSTITCH BTCK410L2 18V amzn.to/2XAytaU
WELDER: Hobart 500559 Handler 140 MIG Welder amzn.to/2WrCLAe
GRINDER: DELTA GR150 6-Inch Bench Grinder with Lamp amzn.to/2WWA4Lc
DRILL PRESS: ShopFox W1668 Benchtop w/Spindle Sander amzn.to/3l4SxPV
NAIL REMOVER: amzn.to/2XxSmzq
MULTI-TOOL: amzn.to/2Xu3TQl
RESPIRATOR: amzn.to/3GiJgjf
FACE SHIELD: amzn.to/3EdD0qf
The above are affiliate links, while they do not cost you any additional money, I do earn a small commission when you use them. thanks!
Thanks for watching!
Photo/Video/Audio Equipment I use:
Neewer Ring Light: amzn.to/2ZCCM7R
Canon Rebel SL3 (250D) camera: amzn.to/3ds6Uhd
Canon 55-200mm STM lens: amzn.to/3DG9Qlk
Deity D3 Microphone: amzn.to/3SofWuJ
Dennis Coffey
Ditto what Von said. We did it ourselves (Okay, my husband did it, I supervised) on our '02 Expedition. We went through several videos and yours was, by far, the easiest to understand.Thank you, Dennis!
Thank you so much, Vikki! I really appreciate your kind words and thanks for watching!
never changed an alternator before. watched your video 1 time and changed mine on my 99 expedition in about 35 minutes.u made an intimidating task very simple. u sir deserve a go fund me because u save wannabe mechanics like us tons of money. thank u so much Dennis
Wow...thank you so much for your comment! This is exactly what makes it joy to do videos....I'm humbled and thankful that this video helped you and I'm so glad to hear that you were successful changing the alternator! You should be very proud of yourself for tackling the job and getting it done!
THANK YOU FOR TAKING THE TIME TO CREATE THIS VERY INFORMATIONAL VIDEO!! I COULD NOT HAVE DONE THE JOB WITHOUT YOUR HELP!! GREAT JOB!
Thank you very much Brian! I appreciate you watching and leaving such a nice comment. I'm glad the video helped!
Good video I like the part where make sure grooves matches the replacement alternator with the old one.
Yes sir, very important! Thanks for watching, Harold!
Just changed the alternator on a 97 Expedition. I was watching another video but they did not show how to release belt tension. I found your video and it walked me through it step by step. Thank you for your help, greatly appreciated.
Yes sir! Thank you Bill. I'm glad it helped and thanks for watching!
I see your video has been out a couple of years but I would like to add a couple of comments. I see that someone has already commented that you should always disconnect the negative terminal first and you won’t get a spark or short out anything.
Also it is a good idea to invest in a computer memory saver. I have one that plugs into the ALDL data plug (for the OBD-2 diagnostics). It came with a long wire that accepts alligator clamps or cigarette lighter plug to connect to an adjacent car, both included. I’ve used it doing alternators, starters, replacing vehicle batteries and didn’t have to worry about the engine running smoothly or the tranny not shifting properly after I had the job done. I keep an old small 12 volt back-up battery from my homes phone system that I put on the floor of the vehicle and clamp right onto it.
Keep up the good work, your videos are very useful.
Great points and ideas! Thank you for watching!
Just changed the alternator on my '03 expedition, took me about 40 minutes...VERY helpful video. owe you a big thanks
That's great Adam! I'm glad it went well!!
Thank you for that wonderful video! The details were fantastic. I am a non-mechanical female that has never worked on cars and your video just helped me replace the alternator on my 99 Crown Vic Interceptor. Much appreciated!
That's fantastic! I'm glad to hear it helped and thanks for sharing that. You should be proud of yourself for tackling it and getting it done!
Where is the busbar located my alternator only had two wires plug-in the new one has three wires 1 is hot one is ground that my white wires supposed to go to the bus bar where is the bus bar? Or do I need it?
Your right the voltage regulator stops overcharging battery. I picked up a Alternator at auto wrecker for $50 and it works well.
That's great! Thanks for watching, Gene!
Thanks Dennis, replaced the alternator in my 2001 F150 5.4L all OK, your video is a great help. Your admonition to double check the belt seating before starting up was critical - I closely double checked and discovered the belt was not seated properly on one of the lower pulleys! Used a new DB Electric 130A ($77!) we'll see how it does. Thanks again.
Great to hear that this vid helped Joe! Thanks for sharing your experience and for watching/commenting!
10-6-2016. Thanks. A good detailed video that covers all the steps and makes this process an easy task. Much appreciated. You videos helped make this half ass mechanic a better one. Your vids help make a difference in the auto mechanic world.
Thank you so much sir for those kind words! I really appreciate it. Comments like this encourage me to do a better job and get more jobs recorded. Thank you!
Dennis,you work a ratchet, faster than anyone I've ever seen.
LOL! I love 'fast motion' in editing....it saves everybody that watches so much time!
Great Video! Well done in the description, editing and follow through. Especially appreciate the note about 6 or 8 groove pulley. Thanks for posting!
Thank you Patrick! I appreciate you watching!
Beautifully Done n Thorough Video!
Thank you very much for watching!
Ugh, I gotta do this to my 97 f150 tomorrow.
in -35c
hopefully it goes smoothly
very informative video/10
Wow, Justin....I hope it goes well. I'd hate to have to do anything in -35C! I don't think I've ever been in weather that cold in my life.
Great vid! I have a 02 expedition and the setup was exactly the same. You saved me both time and money. Thanks
That's great! Thanks Money Mac!
Had the unfortunate experience with buying the wrong alternator. I’m getting a replacement alternator ordered.
Thanks for watching, Earl. Hopefully you'll get the right one and get back on the road soon.
Thanks Dennis - great video easy step by step. Great job!
Thank you very much. I really appreciate you watching!
Thank you. This video helped me a lot. I appreciate the tips especially about the pulley grooves. Well explained.
Thank you for watching and I'm glad the video helped!
Great video very detailed. Interesting comment on the drive pulley on the alternator.
Thanks Bob! I should have mentioned the pulley at the beginning of the video so folks would know ahead of buying the replacement.....I did put in a comment about it in the video description. Thanks again for watching!
Best video ever. Should you replace the attached voltage regulator since that could be the problem rather then the whole alternator?
Thank you for watching, Gene! That could have possibly fixed me up, but I knew the alternator I replaced was a rebuilt one. Since the remanufacturers don't normally replace the voltage regulators, I opted to replace the whole thing with a new one. :)
Thanks for vid,my alternator just went out so im doing it myself.very helpful video.Thank u so much sir.
Thanks for watching Chad! How did the replacement go? I hope you were able to get it done and save some time and money! Thanks again!
Great video, already knew how to change an alternator but never changed one on a f150. I actually watched the video after I had the job done just to see if I done it right
Thanks for watching, Ardis!
Thank you sir. You saved me a lot of money!
Fantastic! Thanks Michael, I'm glad this helped....really glad you saved some money! Thanks so much for watching and commenting!
Nice video but I wish you had mentioned the part about making sure it is a 6 groove pulley instead of an 8 groove at the beginning of the video. Of course they sold me the wrong thing and now its already installed.
I hope you got that all worked out...thanks for mentioning it. I added a note at the beginning of the description for the video to point out the pulley issue.....I agree, I wish I had thought to mention it at the beginning. Thanks for watching!
very informative and thorough. thanks for helping out!
Yes sir! Thanks for watching and commenting, I'm really glad it helped!
This video and the details were perfect!! Thank you!
Thank you Steve! I'm glad it helped, and thank you fro watching!
I.
Hobo.
bi. B. Ok. Jô. Jimmy bbi
muchas gracias Dennis coffey. lo boy a cambiar el sabado
Gracias por ver. Espero que su reparación vaya bien. Lo siento por mi mal español.
Dennis, Thank you for this very informative video. It's in the details.
Subscribed.
Thank you very much Henry! I appreciate you watching and the nice comment!
Thanks brother helped me right through it!!
I'm glad it helped...thanks for watching!
Great video. Thanks
Thank you for watching, Nicholas!
Torque on those bolts is the German standard -- Guten-tite.
LOL! That's about right for any bolt! Thanks for watching Steve!!
wonderful video dennis, it helped me alot! you answered all my questions. thank you very much!
I'm glad it helped. thanks for watching!
Good job Dennis, that was smooth ```
Thank you Richard! I appreciate you watching!
Safety first: never disconnect the positive first, make sure you start with the negative terminal , disconnect it and then wrap the terminal cable with a towel
When training safety gloves and googles are a must
All good points and duly noted Alex. Thanks very much!
Good job.
Thank you for watching, John!
24" breaker bar & pipe over the handle makes the belt tensioner move like butter. #GirlMechanic
Like butta!! haha. Yes ma'am.....the ever popular 'persuader'! Thank you for watching and thanks for the comment!
excellent video
Thank you very much Jorge! I appreciate you watching!
Ty for this video.
Thank you for watching! I appreciate it!
Excellent video! What editing software did you use?
Thank you very much! I appreciate you watching and commenting. When I did this video, I used a program called Wondershare. I've since changed to their latest called Filmora. It makes video editing very easy and it has lots of built in features.
Good video! Is it the same for a 2004 Ford Expedition 5.4 L? Thanks
Thank you! Yes, it should be identical. All of the modular 5.4L engines are very similar, with just a few minor variations in alternator mounting brackets. An Expedition, should be exactly the same as my F150.
Thank you! I will change my Expedition's alternator next weekend. I will let you know how it goes. Cheers!
Hey Dennis, forgot to tell you that I changed my 2004 Expedition's alternator without any issue. It only took me 45 minutes to do it with the help from your video. Just want to say thank you very much! Keep posting helpful videos! Cheers!
I'm glad the hear it went well! Thanks for letting me know.
thanks for you help
+Alex PvP Yes sir! thanks for watching!
I would think if the parts store determined the correct belt ( width ) for the application , they could tell the pulley ( 6 0r 8 ) groove ?
Thanks , :-)
Wyr
God bless
Good point and you would think so, but normally they will ask you if you need a 6 or 8 groove belt. I think the issue is that belts are typically inventoried by belt length........both widths are the same length, so unless you are holding the alternator in your hand (so they can see the pulley), they don't have a good way to tell which width belt you need. Thanks for watching and commenting! I really appreciate it.
Is this the same on an 02 f250 superduty??
Hey Johari, thanks for watching! If you have a 5.4L or a 4.6L modular, it will be the same or very nearly the same. All the 5.4 and 4.6 modular engines are nearly identical. If you have a different engine, the alternator mounting and belt routing etc will probably be different. The wiring will be nearly the same though.
@@dwcoffey ok thanks for such an information video 👍👍
What socket sizes? I have to do one on the hwy
As I mention in the video, my truck takes 10mm to remove the intake cowling, the alternator mount bolts and the hot lead lug. My truck is a 2003 F150. If yours is a different vehicle, it might be slightly different. I would take my socket set and a set of wrenches if I had to do one on the side of the road.
YEAR. YEAR. YEAR. Year of the truck on video title please.
+Command37 The modulars are all the same, that's why there's no reference to the year.
oh ok sorry.
If you have the 5.4 iron block 4 valve that comes in the Lincoln Navigator the manifold is different and an obstacle. Hope you don't mine me pasting a link to a video example of that one specifically: ruclips.net/video/RkNtwd-wdTI/видео.html
No problem, thanks for watching!
This is what I hate about Ford you have to take everything off just to replace a part .
Thanks for watching, George!