RC Seaport Tugboat Upgrades Plus FARM Float Fly BONUS!
HTML-код
- Опубликовано: 10 сен 2024
- I bought my son an RC tug boat so he would have something to run in the water when I'm flying my RC float plane. I bought it knowing that the electronics would probably need to be replaced. I'm going to tell you about the boat and talk about the upgrades I did.
Supplies Used:
HobbyKing HK-GT2B 3-Channel 2.4Ghz Transmitter and Receiver w/Rechargable Li-ion Battery: www.hobbyking.c...
Turnigy Trackstar 25A Brushless Car ESC: www.hobbyking.c...
Turnigy 20A Brushed ESC: www.hobbyking.c...
Zippy Flightmax 6,000mAh 2S2P 35C Hardcase Lipoly Battery: www.hobbyking.c...
CF2805-14 2840KV Outrunner Brushless Motor: www.rctimer.com...
Universal Coupling Joint: www.ebay.com/sc...
Pump motor: www.ebay.com/sc...
Standard Servo: www.hobbyking.c...
Fuel tubing Inner Diameter 2.38mm (3/32"): www.rcplanet.co...
1/2" (12mm) square dowels: www.homedepot.c...
Deans T-Plug battery connectors: www.hobbyking.c... &aff=210817
Three 2-ounce fishing weights
Amazing Goop: www.amazon.com/...
CRC SL3121 Marine Grease: www.amazon.com/...
Servo terminals: www.hobbyking.c... &aff=210817
3mm wheel collar: www.hobbyking.c...
2mm Threaded Control rod: www.hobbypeople...
two 2mm clevises: www.hobbyking.c...
Half the fun with these RC boats is upgrading and tinkering with them. Cheers 🍻
You gave me lots of ideas, including adding a smoke machine to it. I have the original trawler back when the company was owned by Dickie toys. I did what you did by eliminating all the electronics and changing everything over to hobby grade electronics. The big thing with the Dickie fishing trawler was it was loaded with 1980, 's electronic that was not waterproof. as soon as the electronics got wet, it shorted everything out, then corrosion set in. Many were returned right away. I got mine at the Local Goodwill in its original box. I was hoping to salvage the electronics but it was a lost cause. The trawler has working wench that can raise and lower the nets. I actually drilled out the spot light and added a really bright led! I also added led lighting in the cabin and mast. At night, its really impressive.
Great job on the upgrading, very cool!
Just picked up same tug boat from charity store in uk £5.00 cant wait to mod it love the video
Gran bel video ...molto utile...modifica eccezionale e ben fatta ... complimenti...ciao dall'Italia
Had the same issues with their sailboat. Wonderful boat but the electronics don’t last long. So same thing . Ordered new radio and servos. I ordered the tug boat to retrieve the sailboat when the wind quits .
You nearly rebuilt the whole thing with separate parts. Looks like the only thing you got from the original boat was its plastic casing and a few parts. Nice video.
You got this for your son. I got it for my 23 year old self. That's okay with me though.
Hi mike , I have just sailed mine after a couple of years , with broadly similar mods to what you have built (see channel ) I have done 2 conversion vids . thanks for all your tips. best wishes from Wales .
We have near identical interests!
This will likely be my son's 5th birthday present with your modifications. Thanks for saving me a good deal of time!
BTW, sounds like a saito engine at the end there.
Paul Doodes Hi. I’m getting one of these for my son for Christmas. I’d like to complete the mods too. I looked for several of the products listed here but the links didn’t work and several of the parts are no longer available. Have you completed these mods?
you turned that little boat pro!
Great job man
It is fun to watch your son having so much enjoyment from the boat.
Way kool men
I got a similar model. I wanna replace the battery and engine too and add more lights and make it look weathered. Put a smoke generator in the chimney and maybe eventually make the crane arm operable and hydraulic and motorize the winch too. It has potential to be a real nice boat and I got mine for a good price.
Good work, I like the scale look!
Great review and sweet upgrades, lucky boy :) I rerally love it! Have a great week
Super!
6 years later, how is the boat and the components holding up?
thats soooooooooooooooooooo cool and amazing
I picked up a German made Trawler a few months ago from our local Good Will. The electronics were fried wich I guess is pretty normal because they used bees wax was a water proofing. I also noticed this thing has holes in the bottom for some reason,I didnt see any kind of pump but am thinking it was supposed to help balast the boat but instead caused the boat to fill up and short out the circuit board. I saw something simular only its a tug boat advertised on line,It also filled with water and shorted out. The price was around $144 dollars and didnt last very long. I have no idea if its a copy of what I have only mabe the top half was changed. I have purchased a new transmitter and receiver as well as brushed ESC speed controller. all the electronics still function well,just not the controls that came with. The deck work was really well done on this boat. I was really happy with it. I have to get it out of storage now to install the electronics. after seeing your review,I may modify the steering,and install a servo since it has the same type of steering yours has.
does any know if it suppose to have some water in the hull like its not much its just like a small lego plate depth its really old i got it when i was 10 years and now im 18 please can somebody tell me if i have to open it to see if my dad did seal it off coreclty it had a issue with the water pump and still have its been staying and picking up dust for 8 years but it runs perfect just the issue with water pump and a bit low range but its kinda good egough for me
I have this same boat and it leaks water onto the cab. Did you have any problems with that? it looks like the white posts that come up from the water chamber for the spray are hollow and water is just pouring into the boat? should these be capped off?
hey man, I change my motor, esc, transmitter n receiver but wish to reuse my pump and servo but I saw a twisted red n black connector which I believe are the power supply and also another 4 wired connector from the servo as well. any idea how I shd conect up the connections to the receiver of the old servo?
Does the pump run continuously or can you control it from the controller?
Terrific! I’m getting one of these for my 5 year old son for Christmas. I’d like to complete the mods too. I looked for several of the products listed here but the links didn’t work and several of the parts are no longer available. Could you tell me the best way to find compatible updated parts.
I like tug boats
Awesome and inspiring video. I took this challenge on to make a horizon tug rival. Any idea what size the prop shaft is? My plastic coupler also stripped and im looking at replacement options.
Making it a speed demon now?
I want the same boat with brushless mod.. Can you mod
Still one side heavy? But looks great
👍
I am going to fit a sound unit from a railway locomotive model on this model
you can turn off the pump guide by tx is not
The tower is too big & high.
The centre of gravity is high.
My son 's boat hit the middle of this tugboat caused it over turned.
Very true. Adding ballast weight to the hull can help.
I'm getting one from Amazon
Vraiment pas terrible
this thing is selling for 299$
there are all kinds i think you found the aqua craft one, this one you can buy for $54!
I picked up a German made Trawler a few months ago from our local Good Will. The electronics were fried wich I guess is pretty normal because they used bees wax was a water proofing. I also noticed this thing has holes in the bottom for some reason,I didnt see any kind of pump but am thinking it was supposed to help balast the boat but instead caused the boat to fill up and short out the circuit board. I saw something simular only its a tug boat advertised on line,It also filled with water and shorted out. The price was around $144 dollars and didnt last very long. I have no idea if its a copy of what I have only mabe the top half was changed. I have purchased a new transmitter and receiver as well as brushed ESC speed controller. all the electronics still function well,just not the controls that came with. The deck work was really well done on this boat. I was really happy with it. I have to get it out of storage now to install the electronics. after seeing your review,I may modify the steering,and install a servo since it has the same type of steering yours has.
i have this issue to but mine does not short out it does still run perfect but all goes out when i lift it and water pump does not work so your may be a fake one i cant be sure but might be