2020-2023 RX350 HOW TO remove the bumper install LED DRL step by step
HTML-код
- Опубликовано: 15 дек 2024
- Amazon link
amzn.to/3NOltKR drl fog lights
2020-2023 LEXUS RX350 Remove side moldings on fenders, remove clips, remove top panel, pull bumper skin, now you can remove 2 screws and a clip,install new drl,connect either ignition or parking light wire
That looks awesome. I am going to send this video to my wife. 😊💙👍
@ironbull429 thank you. Let me know when you are ready
They lost your lights, just reordered the pair lights, the seller wouldn't give me my money back %
Would be nice to see how you wired the fog lights. Been waiting for a fog light kit.
Hi, the ignition wire is at the dash fusebox .white 23 pin plug it's red wire pin#14 or you can connect it to your parking lights or head lights at the headlight
I really appreciate your video as a DIY person can you please share with me on how to wire the lights and where you connected for your power source and ground and where did you install the light switch and the wire route. And I truly appreciate your help and your time. Thanks David !!
@davidkisler687 please see reply to John
@@davidkisler687 under the hood there is a ignition fuse 5 or 6,it's red and yellow, those are ignition fuses.it only comes on with the key on
@@goautosound1 Just know that I truly appreciate your help and support and in a world where it’s almost impossible to find someone who is genuinely willing to listen and help you our one in a million especially as our society deteriorates and is becoming more divided with no hope of what the future holds.
Thank you for your time and help !!!!
@@davidkisler687 this is drl no switch,it comes on when you start the car
@@davidkisler687 glad to help Please subscribe me 😀
Where is your shop located ? maybe if you're nearby I could come to you and have you guys install it for me
Autosound two 1521a rt 22west Union NJ 908 688 7776
Ok. I'll call you tomorrow
@@tommycastro7357 thank you
Who do i ask for ?
@@tommycastro7357 you can ask for me Duke 😃
Where did you buy the fog lights from being after market?
You can find these online Amazon or eBay
I wish you showed the wiring. And how to do it.
@tommycastro7357 ok under the dash there is a fuse box.yellow or purple wires are headlights and parking lights. You must add a relay to make positive out cause they are negative signals. Be sure to test them with volt meter
Ok. Thank you
Can you please send me the link because the ones i came across from Ebay only have the fog lights but no wires or relay. Highly appreciated
We didn't get the wire or relay from ebay
You can make your own wiring with bosh relay
Oh, i was reading one of your answers to someone else question and it said that yours came with the wires and relay
Yes I got mixed up with the other light we did. Sorry for the mistake. This one didn't come with harness
No no worries
Where is your shop located maybe if you need me I can bring you mine
Duke I want my wife Lexus RX350 F Sport fog lights done. Hook me up I am a lifetime customer. Great job. 😊💙👍
@@ironbull429 thank you 😊
Hello was is a plug and play foglight? Did the car came in pre wired?
@JanEdwySalvador No, it didn't have the wires. We had to put switch and relay harness
Can I tap into the auto headlight harness?
@@briansek1847 we normally don't like to connect at the auto light wire. The reason is when autolight comes on most cars starting at lower voltage which makes light to flash till it gets full power. But you can try and see if it works on this car ,haven't tried on lexus
I have same truck. Are these truck pre wired for fog lights like other toyota/lexus vehicles, or must be wired for the fog light upgrade? Please explain how you did the install? Much appreciated!
Ours didn't have the wires so we had to run new wires that came with the lights, the new light comes with switch and relay wiring, battery and ground get connected at the battery under the hood then run switch inside then connect ignition wire at the fuse box
Here
Here you say the fog light came with everything
Can you please tell me where I could buy a wiring harness for the driving lights, I would really appreciate your help.
Most lights don't come with relay wiring harness, you can make your own like what we did, you can get a bosh relay and a switch from any autopart store.
Or try this link
www.amazon.com/Teochew-LED-Wiring-Harness-Switch-Driving/dp/B098WNL5DY/ref=asc_df_B098WNL5DY/?tag=hyprod-20&linkCode=df0&hvadid=692875362841&hvpos=&hvnetw=g&hvrand=14932893802319394671&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9004286&hvtargid=pla-2281435179818&psc=1&mcid=edf82cac1ec137518fa64fcd2c6dd583&hvocijid=14932893802319394671-B098WNL5DY-&hvexpln=73&gad_source=1
hello how you doing can you tell me what kind of bulbs it use thank you
@MrJoeym888 you can go to Sylvania. Com and enter the model of your car to see what bulbs you need
@@goautosound1 Thank you
@@goautosound1 there one problem the site dos not content Lexus
@@MrJoeym888 I looked up it's not listed cause it's LED assembly
Okay . Where does the wires go to power it up ?
Please read the reply blow your question
Unable to find the information or video can you please direct me to the link / video.
Thanks again !!
@@davidkisler687 under the hood there is a fuse box,5 or 6 is ignition red and yellow fuse, they only come on with the key on
What about re-installing the bumper
It is just reverse of what we did
I want my video my video as well. Soon you very soon. 😊💙👍
Ok