How and Why to Upgrade Your Porsche Turbo Diverter Valves

Поделиться
HTML-код
  • Опубликовано: 24 июл 2024
  • Upgrading the diverter valves on a Porsche Turbo has been a first step modification upgrade for nearly 20 years. In this VR Vlog video we show you how poor the stock diverter valves work on this tuned Porsche Macan GTS. We decide to upgrade the stock valves with our Agency Power billet diverter valves. These new DVs feature a spring and piston design. The spring is stiffer providing the car with better boost response and helps hold the tuned boost all the way to redline.
    These valves work on the 996TT, 997.2TT, 991TT, Cayenne Turbo 955 957 958, Panamera Turbo, Macan S GTS Turbo.
    Order new valves here - www.vividracing.com/index.php...
  • Авто/МотоАвто/Мото

Комментарии • 57

  • @tonyimbarrato5325
    @tonyimbarrato5325 Месяц назад

    Thanks for the video very informative. I have a 2016 turbo Cayenne. And I think my diverter valves are at the throttle body. I’ve posted several pictures compared to other cayenne and nobody seems to recognize my set up and I know it is a factory set up. Any additional info will help. I’ll see if I can attach a picture.

  • @kyungwoolee9301
    @kyungwoolee9301 3 года назад

    Thank you. It was an easy video with Korean translation. I'll give it a try.^^

  • @user-el2zj3pw5r
    @user-el2zj3pw5r 3 года назад +1

    2014/2015 3.6turbo model same issue?

  • @MrGuilhermegouvea
    @MrGuilhermegouvea 5 лет назад +2

    Hello, I have a 997.2 turbo and I have a problem. When I accelerate half the throttle I hear sneak noise ... Could it be the diverter valve? Another thing that happens is the car does not rise turbo pressure. When that happens, I have to turn off the car and turn on again. Have you seen anything like this?
    Thank you very much.

    • @vivid_racing
      @vivid_racing  5 лет назад +2

      Sounds like a boost issue. It could be the diverter valve or could be a boost leak from one of the boost hoses.

  • @petermabbort456
    @petermabbort456 5 лет назад +1

    Hi there I’ve just bought a 2009 Cayenne Turbo and looking to upgrade the power. These look a good start with a tune. Any suggestions from you guys.
    Thanks.

    • @vivid_racing
      @vivid_racing  5 лет назад

      Our VR Tuned ECU Flash is the best way to go. The diverter valves help keep the boost responsive same as this. Catback exhaust is nice too - www.vividracing.com/tuned-ecu-flash-tune-porsche-957-cayenne-turbo-48l-dfi-0810-p-150773655.html

  • @ortcloud99
    @ortcloud99 2 года назад

    Is macan ECU tuned?

  • @theprofessionaldillweed6235
    @theprofessionaldillweed6235 Год назад

    Would this fit the 3.0L macan S?

  • @TeslaOG
    @TeslaOG 3 года назад

    What wheels/style/sizes front and rear are those? Thanks

    • @vivid_racing
      @vivid_racing  3 года назад

      The wheels are Vorsteiner V-FF 103 Flow Forged, not sure on the sizing! You can check out the options here: www.vividracing.com/vff-103-c-9736.html

  • @louieluk2426
    @louieluk2426 3 года назад +1

    Hello I have a 2015 Macan S with ECU tuned and it has the same issue. I would like to buy these Diverter Valves but not able to see that available on your website. Can you please show me where to order? Do I need 2 of these? Thank you!

    • @vivid_racing
      @vivid_racing  3 года назад +1

      Take a look here - www.vividracing.com/agency-power-racing-diverter-valve-polished-volkswagen-audi-porsche-clearance-p-153326650.html

    • @louieluk2426
      @louieluk2426 3 года назад +1

      @@vivid_racing Thank you for you quick reply! How many do I need for my Macan S?

    • @vivid_racing
      @vivid_racing  3 года назад +1

      2

    • @louieluk2426
      @louieluk2426 3 года назад +1

      @@vivid_racing Great! Thank you for your help!

    • @louieluk2426
      @louieluk2426 3 года назад

      @@vivid_racing Hi, I think the Macan S has 2 Diverter Valves

  • @stevengraham3138
    @stevengraham3138 3 года назад +1

    Would these fit my 2016 macan s?

    • @vivid_racing
      @vivid_racing  3 года назад

      These valves work on the 996TT, 997.2TT, 991TT, Cayenne Turbo 955 957 958, Panamera Turbo, Macan S GTS Turbo!

  • @tanahiro26
    @tanahiro26 4 года назад

    is this comes for 2017 panamera?

    • @vivid_racing
      @vivid_racing  4 года назад

      It fits the 2016 models, but we have not confirmed fitment on the 2017 model, unfortunately.

  • @anhtunguyen111
    @anhtunguyen111 5 лет назад

    Any options for an atmospheric diverter valve?

    • @vivid_racing
      @vivid_racing  5 лет назад

      You could plug the return hose and let it vent atmosphere

    • @RubenSegura
      @RubenSegura 5 лет назад

      Vivid Racing would that decrease power? Or creates problems?

    • @vivid_racing
      @vivid_racing  5 лет назад +1

      @@RubenSegura You can probably run vent to atmosphere as these dont have MAFs like the older 996TT so should be a problem.

    • @TheG985
      @TheG985 2 года назад

      Dude no way. I have white 2013 turbo. I’d love to start modding it and I was thinking you could divert out bc no maf!

  • @evo18
    @evo18 4 года назад

    Would it have been easier if the front bumper was taken off?

    • @vivid_racing
      @vivid_racing  4 года назад

      A lot harder

    • @cbrooks2767
      @cbrooks2767 4 года назад +1

      I replaced mine by removing the bumper cover and yes, it frees up a lot more ways to get at them. Makes them much easier to see inside there to know what to do. Doing it from underneath requires you to do a lot of it by feel and if you haven’t done it before I think you’d be really frustrated.

  • @djsin5254
    @djsin5254 2 года назад

    Can I put one on my macan base?

  • @switlikbob1
    @switlikbob1 4 года назад +1

    Did you "zip tie" those new diverter valves in place?

    • @vivid_racing
      @vivid_racing  4 года назад

      Bob Neary I believe I used the stock hose clamps. Space is so tight that when connected to both hoses they don’t move.

  • @shaslyrr1
    @shaslyrr1 2 года назад

    do GTSs have turbo??

    • @HowdySBC
      @HowdySBC 2 года назад

      I believe all Macans are Turbo in-fact if not in name.

  • @Eidrian111
    @Eidrian111 2 года назад

    Why they’d don’t work in 997.1 turbo?

    • @vivid_racing
      @vivid_racing  2 года назад

      997 Turbo uses boost recirculating valves aka BRVs.

    • @Eidrian111
      @Eidrian111 2 года назад

      @@vivid_racing oh I didn’t knew that. Are they worse than diverter valves?

    • @vivid_racing
      @vivid_racing  2 года назад

      @@Eidrian111 They install directly on the turbos. www.vividracing.com/agency-power-boost-recirculation-valves-porsche-997-turbo-gt2-393357970891-p-153837182.html

    • @Eidrian111
      @Eidrian111 2 года назад

      @@vivid_racing thank you for your response. You’ve made me less ignorant. I will definitely be buying for my CTT

  • @donovanwilliams16
    @donovanwilliams16 3 года назад

    Did this fix the issue shown in video at 00:40? You don't really show partial throttle after only WOT.
    Do you think this is what is causing this issue: ruclips.net/video/n2YXxKEHEaM/видео.html ?

    • @vivid_racing
      @vivid_racing  3 года назад

      It does fix the modulating boost under partial throttle.

    • @donovanwilliams16
      @donovanwilliams16 3 года назад

      @@vivid_racing did you watch the video I posted? Mine happens at 80-90 throttle as per video and sometimes at wot

    • @vivid_racing
      @vivid_racing  3 года назад

      I did, diverter valves should fix that issue due to the spring in the stock valves most likely being worn.

  • @camryds
    @camryds 2 года назад +1

    ok I would say that this fails in the "how" but more of a success on why. every video on any instructions leave out the most important part -- actually how to remove.... so bad.

  • @realtalk7571
    @realtalk7571 5 лет назад

    First

  • @Gilbertll
    @Gilbertll 4 года назад +4

    The factory installed spring works for most applications.... are you serious??!
    This is a compleyely nontechnical video, it is misleading and fails to explain the purpose of the diverter valve and more importantly it fails to explain down side of installing a diverter valve that does not open when it should (under vacuum). Worst of all you fail to mention the spring rates and how to know or teach yourself which is proper for the specific application.
    For only $250 you can destroy your turbo because bubba recommends the swap.

    • @vivid_racing
      @vivid_racing  4 года назад +1

      Thx for your view

    • @kinglarry1240
      @kinglarry1240 4 года назад +2

      Believe or not, when i swapped oem with forge diverter, i found waters in the oem diverter. Lucky i got the hybrid version. Never seem 15 on sport mode with oem! Best mod if u really know bout ur own car!

    • @ikaikaboo
      @ikaikaboo 4 года назад

      What you recommend for getting the spring rate correct? I see the Flat6 motorsports diverter only has a single spring offering...thanks

    • @kinglarry1240
      @kinglarry1240 4 года назад +1

      i went for ebay rxk hybrid 2 for $120, no different than flat6 and others!

    • @Louieluk
      @Louieluk 3 года назад

      @@kinglarry1240 can you show me where I can buy these from ebay?