Отличная рестоврация лесного ножа Ната! У меня есть такой , только сильно меньше размером . До этого видео не мог понять как попадают фиксирующим гвоздем в отверстие хвостовика лезвия)
Shrimp hatchet??? Is it used just for shrimp?? Never heard of one It looks great and you did a wonderful job restoring it as well And love the handle you made for it!! Enjoyed the video and I gave it a Thumbs Up. Wished you would have shown how it's used
Жалко было смотреть как ломают рукоять, видно что мастер который делал топор, хорошо постарался. Не было необходимости так его реставрировать, достаточно было начать с ним работать и он пришёл бы в норму.
Alors ça c 'est génial en plus j 'adore le bois de cerf comme matière pour faire un manche de couteau ou de serpe .C 'est une très belle restauration .
I like the handle if I find it in the market i will buy it !!!! if you were planing to go that far in your restoration , using a file and sand paper to smooth the surface , why just use a wire wheel to remove all the rust from the beginning??? !! and after that use the file and sand paper to avoid all this process of use small wire brush , baking soda etc, also i believe you were planing to save the wood handle but you were trying to remove the nail you destroy the handle ! i did restoration and I tried to remove the nail first removing the head and punch the nail trough the wood or drill the nail ! then remove the handle for restoration . your final product looks beautiful !! but it is call now a renovation !!
Ich habe mir jetzt schon viele Videos von Dir angeschaut. Wirklich tolle Projekte und man sieht, dass Du da ein echtes Händchen für hast. Nur dass du beim Feilen nie die Feile beim Rückhub anhebst, ist das Einzige was stört. Wenn Du das noch machen würdest, halten Deine Feilen auch länger.
Ruben voitzeck warum sollte er das machen ? So wie er das mach finde ich das gut und reicht vollkommen aus ! Muss ja nicht ein perfektes Meisterstück werden ! Mfg, ist nur meine Meinung!
Why do all youtube restorers, regardless of nationality, use amazingly rusted shears for cutting sandpaper? Like, every single one- it's amazing! (Loved the video; amazing work)
Damn….I was hoping to see a demonstration of the intended use of this beautiful “shrimp hatchet”. Never heard of such a thing, so it would have been nice to see how exactly it’s supposed to be used on shrimp, etc.
have you tried use electricity to remove rust method? sure its something that sits over night but would save you alot of work . a simple car battery charger would do the job
@@genkaijapan theres heaps of videos on it and how best to use , heres link so you know what im referring to, i hope it helps ruclips.net/video/54ADeB6V1rQ/видео.html and no im not connected with the channels link in anyways its just the first one that came up in my search for you
Are you really in japan? I noticed your vise has 3 ½" on it. That is imperial, not metric as I believe they use in japan. Please correct me if I am wrong. Probably just american made.
At the 8:06 & 11:23 marks… Is there going to be a video of the restoration of those rusty scissors/clippers that you used to cut the sandpaper?? (Just odd to see a restoration channel use rusty tools to restore a different rusty tool….)
素晴らしい！うちにも祖母が使っていたサビサビの鉈があり
ちょっと刃先研いだだけで何とか使用してます。
鏡面仕上げで紙まで切れるとは凄い！！
Thats great workmanship 👍👍
コメントありがとうございました。
登録視聴している方からのコメントは少し違う嬉しさがあります。
ちょいちょい入るピタゴラスイッチ的な要素が視聴者を飽きさせない
私の錆びた心も綺麗にしてほしくなりました
お見事です
本当に日本人って物を大事にするなー！素晴らしい！！
8拍子でカメラワーク変わるとこすこ❣️
日本製の農工具は本当お高いです。でもとても丈夫で長持ちします
使う方は限定ですが、大切になさってください
鉈は、包丁とは違い、主に木を切るためのもので、きれいに研ぐ必要はないです。
主に刃先だけ研いで使えば用は足ります。
使い込んでいくと、錆は自然に落ちます。
で、切れ無くなれば、気になる部分を少し研げば、十分使えます。
此れは、中華包丁とは違う、
海老ナタと云うナタですね。
枝打ちに、便利なナタですね。
The handle came out better than I expected... and it is very sharp...👍❤️
釘を抜く時は斜ニッパーがオススメです
The point that keeps the cutting edge off the surface is interesting
It’s always fascinating to see how people in other countries approach restoration.
リペア後がかっこよすぎてアート作品みたいだなと思って見てたらガンガン使ってて笑う
Отличная рестоврация лесного ножа Ната!
У меня есть такой , только сильно меньше размером .
До этого видео не мог понять как попадают фиксирующим гвоздем в отверстие хвостовика лезвия)
The video is great. I would have just cleaned it, preserving the traditional handle.
It's a nata, if I'm not mistaken.
It should be a farm tool similar to the billhook.
My compliments, an accurate and meticulous restoration.
撮り方かなり工夫されてますね！見てて楽しい動画でした😊
コメントありがとうございます！楽しんでいただけるように頑張ります!!
電動回転工具使用時グローブは外しましょう
メッキみたいにテカテカの鏡面にするより1000番ぐらいの砥石で曇りにして硝酸で刃を出してあげた方が鉈らしいし刃の食い付きもいい
是非ご自身で動画出した方いいと思います！笑
Nice and wonderful thing🌹🌹🌹
素晴らしい👍参考にさせていただきます✨
Excelente trabalho. Parabéns 👏🇧🇷👏
Obrigado!😊
q bonitinho ele falando obrigado
Shrimp hatchet??? Is it used just for shrimp?? Never heard of one
It looks great and you did a wonderful job restoring it as well And love the handle you made for it!!
Enjoyed the video and I gave it a Thumbs Up. Wished you would have shown how it's used
キレイになりましたね。放置されてた鉈も喜んでるみたいです。
I was skeptical right up until he chose the stag handle. Great Job!
クエン酸の後の重曹?酸性の水溶液をアルカリ性で中和してどうするのでしょう重曹の工程必要ですか？
指で弾くの好きww
Жалко было смотреть как ломают рукоять, видно что мастер который делал топор, хорошо постарался. Не было необходимости так его реставрировать, достаточно было начать с ним работать и он пришёл бы в норму.
素晴らしい❗
good work
Thanks for watching always😆
失礼します鏡面加工すると錆びなくなるのでしょうか？
Very nice well done.
Thanks👍
Muy buen trabajo, felicidades y saludos desde Jalisco México
Gracias por mirar desde México 😊
q bonitinho ele falando espanhol
見ていて気持ちいい！…かな？
Alors ça c 'est génial en plus j 'adore le bois de cerf comme matière pour faire un manche de couteau ou de serpe .C 'est une très belle restauration .
bois de cerf je l'aime aussi
I like the handle if I find it in the market i will buy it !!!! if you were planing to go that far in your restoration , using a file and sand paper to smooth the surface , why just use a wire wheel to remove all the rust from the beginning??? !! and after that use the file and sand paper to avoid all this process of use small wire brush , baking soda etc, also i believe you were planing to save the wood handle but you were trying to remove the nail you destroy the handle ! i did restoration and I tried to remove the nail first removing the head and punch the nail trough the wood or drill the nail ! then remove the handle for restoration . your final product looks beautiful !! but it is call now a renovation !!
Good job buddy 👍
Ich habe mir jetzt schon viele Videos von Dir angeschaut. Wirklich tolle Projekte und man sieht, dass Du da ein echtes Händchen für hast. Nur dass du beim Feilen nie die Feile beim Rückhub anhebst, ist das Einzige was stört. Wenn Du das noch machen würdest, halten Deine Feilen auch länger.
Danke, dass sie mich belehrt haben!👍
Ruben voitzeck warum sollte er das machen ? So wie er das mach finde ich das gut und reicht vollkommen aus ! Muss ja nicht ein perfektes Meisterstück werden !
Mfg, ist nur meine Meinung!
Bellísimo trabajo amigo saludos
Complimenti!!! Ottimo lavoro!! Bravo.
いいねリサイクル
Superb and very nice explane is very good👍👍👌👌😘😘
12:33 gërshërë e vjetër !
Cilin lloj druri përdore për dorezë ?
BRAVO ! 👌 RESPEKT ! 👍
🇦🇱 🖐
Muy bello trabajo👍
Estén atentos al futuro
ナタこそ名刀
Belle restauration. Bravo.
Merci d'avoir regardé!
@@genkaijapan : C’est avec plaisir que j’ai regardé votre vidéo
q bonitinho ele falando francês
This machete is used on wood and bamboo like others. Shrimp is just the name from its shape. Ebi-nata in Japanese. Ebi means shrimp.
Это не мачете, а тесак - мачете должен быть легким, так им приходится размахивать иногда часами напролёт, а этим оладушком особо не помашешь.
Great video Great work 🤝🤝👏
What a beautiful restoration! I loved your video and I am a subscriber now!
巧妙なモノタロウのステマ
送料の調整でつい買ってしまいます(笑)
It seems the scissors need some maintenance too
Yes! I tried maintenance. Please see the latest video.
Why do all youtube restorers, regardless of nationality, use amazingly rusted shears for cutting sandpaper? Like, every single one- it's amazing!
(Loved the video; amazing work)
Awesome job 😎👍
この手の動画で良く有るのが、最初に酸でのサビ落とし…
後で全体にヤスリかけるのにどうしてそんな事するの？ヤスリでサビも落としちゃダメ？
Well done looks amazing 👏 love the handle
Damn….I was hoping to see a demonstration of the intended use of this beautiful “shrimp hatchet”. Never heard of such a thing, so it would have been nice to see how exactly it’s supposed to be used on shrimp, etc.
cool job👍
Thanks!!!
Excellent ! 🤩
have you tried use electricity to remove rust method? sure its something that sits over night but would save you alot of work . a simple car battery charger would do the job
I will try‼
@@genkaijapan theres heaps of videos on it and how best to use , heres link so you know what im referring to, i hope it helps ruclips.net/video/54ADeB6V1rQ/видео.html and no im not connected with the channels link in anyways its just the first one that came up in my search for you
Thank you for your kindness!
Very happy!
@@genkaijapan no worries keep up the good work :)
@@genkaijapan you can also try EvapoRust which you just leave soaking overnight. Non toxic.
ナタにそこまでの光沢や切れ味は必要ないかとwww
片刃のナタは枝打ちするときにきれいに切れなきゃいかんから切れ味必要
実家からゆずりうけました
ナタがすごいサビサビで 切れ味も蘇らせたく動画を検索拝見させていただいた次第です 顔が映るくらい蘇らせたくなりました😭有難うございました｡ﾟ(ﾟ´ω`ﾟ)ﾟ｡
beau travail....bravo...
Merci d'avoir regardé
@@genkaijapan ça été un plaisir merci a vous...
I was waiting for him to disappear once he put the ring on. Lol. 🧙♂️
これうなぎ鉈の部類に属するのかな？
Buenísimo!!!!!Felicitaciones.
Gracias. Haré mi mejor esfuerzo!
Must have big shrimps in Japan if you gave to twat them with that to kill em. 🤣
外国かと思ったらしっかりクエン酸で草
がっつり日本です(笑)
8k shapton for just chopping wood is overkill. Hahaha
最初に出てきたハサミをレストアしようよwww
今後の動画をお楽しみに😁
beautiful👏👏
Thank you!!!!!
I'm curious, where did you get the deer antlers? Did you find them in a nearby forrest? Or is there a specialty shop in your town?
Sometimes I pick it up in the mountains or get it from a hunter
Оленьрогторг
Jokes on everybody . Shrimp hatchet is not for shrimp, it's the shape
うちは グライダー
刃 600番
仕上げ 1000番
Amazon
Me at 1st min: Where is the machine?
Also me, later: Oh, good.
Relajante y satisfactorio mirar estas restauraciones. Excelente trabajo.
Magnífico trabalho
Restaura a tesoura que vc cortou a lixa! Vai ficar top👍
Please polish those scissors next.
Sweet 👍🏻 👍🏻
錆びてはいたけど 新品かな？
使った形跡がないんじゃ？
柄も痛んでないし鎬も新品っぽい。
サムネ見ただけで同じ事思ったw
Shrimp hatchet???? Hmmm, I thought it's a Sugar cane machete.
Are you really in japan? I noticed your vise has 3 ½" on it. That is imperial, not metric as I believe they use in japan. Please correct me if I am wrong. Probably just american made.
Born in Japan, I grew up in Japan
There are many tools with inch display in Japan.
Many tools are imported from the United States
My god tho thats some sherlock holmes style inspection lmao
It just needed some rest remover that's all.
At the 8:06 & 11:23 marks…
Is there going to be a video of the restoration of those rusty scissors/clippers that you used to cut the sandpaper??
(Just odd to see a restoration channel use rusty tools to restore a different rusty tool….)
ひぐらしのなく頃にのレナ鉈だね！
A madeira incorpora o prego. Quanto mais antigo, mais firme.
Excelente restauración amigo...
Gracias！
鉈もいいですが、10:50登場のハサミ磨いていただけませんか？
はい！動画にしますのでお楽しみに😁
Parabéns muito bom mesmo !
Lol I like how your restoring a shrimp knife, but has some crazy rust scissors haha epically funny!!!
It's really rusty! Stay tuned for future videos!!!!!!
@@genkaijapan awesome sounds good!
Me: Japanese shrimp hatchet?
Me also: Japanese prawns size of turkeys.
完全にどっかで見たような再生動画で笑ったｗ研いだ後の切れ味のよさにも笑ったｗ自分でもするときの参考になりました！
Японцы вещи делают!,
Угарнул как долго он скобы вытаскивал
Tremendo trabajo. Congratulations
海老鉈っていうんだね
知らんかった
Handle Made With
amazing 💖💖💖💖💗💗💞💞👍👍👍👍👍👍🌸🌼🌼🌼
Thanks!!!
デコピン→コロンがイイ^ ^
Saudações do Brasil, inscrição feita!
Some right know-it-alls here..bet this guy's laughing 😂👍🏻