Im sending the files via wifi and the printer keeps reseting. I've tried everything.. there is someone i could talk? I have a two trees sapphire plus. Please help
I have a Robin nano 1.2. I bought the wifi card and inserted it. On boot up no hotspots. I updated the firmware for the Robin nano 1.x and the mks wifi. When I go to the wifi screen I still get no hotspots? Am I doing something wrong? Is there a way to see if I have a defective wifi card? Why can't it see any hotspots? Thanks.
@@jakubpulka spoiler alert, no we can't, you need to use the original WiFi board, if you use another one the MKS Robin doesn't connect to any WiFi signal
I thought it was now possible to send the g.code file from the computer to the Robin card. But I see nothing has changed since my old MKS Gen 1.4 I don't want to be constantly inserting SD and removing SD, I'll look for a card that can do it
@@makerbaseteam4217 I know that the 'MKS Wifi Module' is necessary. I have the old MKS Wifi on my current Gen 1.4 board, not is possible upload files to the SD on TF28, but I can control the printer from MKSCloud App. I am thinking of upgrading to a Robin Nano v3, for that I am looking information, how to transfer files from the computer to the SD card within Robin.
@@Plizze the 3.1 firmware needs to be recompiled. Otherwise, the 2.0 monitor ends up with a white screen of death. Then you have to downgrade your firmware to version 2.0. So if you buy the 3.1 board, you don't get the 3.1 firmware; you get the 2.0 firmware, which is not as good.
tendrían que poner subtítulos en español, pero esta muy bien en lo que a lo visual se refiere, valdría también para la mks robin nano V1.3???? la cosa es que me he comprado la two trees bluer y me vino con la placa que he citado anteriormente, y me gustaría saber si es compatible y si sí o sí tengo que actualizar también el firmware de la pantalla, ya que la maquina trae el ultimo firmware disponible
Thank you for the information. It was successful. Leave the data for the next person. 3D Printer CREASEE CS-30 Motherboard MKS Robin Nano v1.2 Wireless controller mks robin-wifi module v1.0 It took some time to install it on the main unit. wiwf will recognize it and take a while to catch a few wifi. Select your wiwf settings with your finger and enter the password. The 3d printer recognizes the wifi and displays the ip address. I have a request for the video. I want you to enlarge the display of icons and file names in the video. Clicks are easy to understand if there is a click sound.
Im sending the files via wifi and the printer keeps reseting. I've tried everything.. there is someone i could talk?
I have a two trees sapphire plus. Please help
I have a Robin nano 1.2. I bought the wifi card and inserted it. On boot up no hotspots. I updated the firmware for the Robin nano 1.x and the mks wifi. When I go to the wifi screen I still get no hotspots? Am I doing something wrong? Is there a way to see if I have a defective wifi card? Why can't it see any hotspots? Thanks.
Would be great to have ability to upload files for print using this module (and without using specific slicer)
Hi makerbase team
Is it possible to install this module on robin nano v3.1 and mks TS35 v2.0 with TFT_COLOR_UI interface? and how?
I have a question, ESP-12e it is compatible with Robin Nano v1.2?
I have the same question :) Can I upload mks software to esp module?
@@jakubpulka spoiler alert, no we can't, you need to use the original WiFi board, if you use another one the MKS Robin doesn't connect to any WiFi signal
@@avbaudiobooks297 fortunately there no very big price difference
@@jakubpulka haha yes good luck bro
I thought it was now possible to send the g.code file from the computer to the Robin card. But I see nothing has changed since my old MKS Gen 1.4
I don't want to be constantly inserting SD and removing SD, I'll look for a card that can do it
gen_l needs to use our serial screen and tft wifi
@@makerbaseteam4217 I know that the 'MKS Wifi Module' is necessary. I have the old MKS Wifi on my current Gen 1.4 board, not is possible upload files to the SD on TF28, but I can control the printer from MKSCloud App.
I am thinking of upgrading to a Robin Nano v3, for that I am looking information, how to transfer files from the computer to the SD card within Robin.
@@Plizze the 3.1 firmware needs to be recompiled. Otherwise, the 2.0 monitor ends up with a white screen of death. Then you have to downgrade your firmware to version 2.0. So if you buy the 3.1 board, you don't get the 3.1 firmware; you get the 2.0 firmware, which is not as good.
@@corlissmedia2.0 Thanks for answering
tendrían que poner subtítulos en español, pero esta muy bien en lo que a lo visual se refiere, valdría también para la mks robin nano V1.3???? la cosa es que me he comprado la two trees bluer y me vino con la placa que he citado anteriormente, y me gustaría saber si es compatible y si sí o sí tengo que actualizar también el firmware de la pantalla, ya que la maquina trae el ultimo firmware disponible
Yes, but wifi module is required
Thank you for the information.
It was successful. Leave the data for the next person.
3D Printer CREASEE CS-30
Motherboard MKS Robin Nano v1.2
Wireless controller mks robin-wifi module v1.0
It took some time to install it on the main unit.
wiwf will recognize it and take a while to catch a few wifi. Select your wiwf settings with your finger and enter the password.
The 3d printer recognizes the wifi and displays the ip address.
I have a request for the video.
I want you to enlarge the display of icons and file names in the video. Clicks are easy to understand if there is a click sound.
You can choice between Repetier or Octoprint?
It seems that repeater-host can also be connected, but octoprint should not work
please drivers flsun q5
does work it with simplify 3d?
It work
como conectar usb pc via cabo ???
It is the USB connection between the motherboard and the computer, what host computer do you use?