Thank You! Set up the S136. Found it more consistent to connect with phone then remote. Video recorded on phone was FHD 1080, very clear. No stabilization so probably not good enough serious hobby videos, but good enough for home movies. Make sure you calibrate it from the takeoff location and every time prior to flying to get more consistent flying performance. Doubt all the functions shown on the function screen work with this model but will try a few once I fully understand them. So far have always used the return to home for landing, works very well and turns off blades after landing. This is an excellent choice for learning about drones and their basic capabilities. The stated specs on distance are very impressive and have no plans to test those limits. So far very impressive for the price I paid ~$70 incl tax and shipping.
I'm in need of your help with this drone. I have already cut 3 fingers with the blades.And ever since I downloaded the app.I lost control of my remote control. It has 2 green lights and one red light flashing.And I can't do anything on the remote. Please help.
I have the 135 drone, when I install the sd card and then press the camera button I cannot find any pictures. I am not even certain it took pictures. Is there a setting I am missing. Any help would be appreciated.
@@darerchobbyreviews Thanks again. Bought one to learn drones w/o risking crashing a $1000 unit. Did not expect much for the $65, but this thing is fun and great for what it is.
@@GoldChump Right on! They are a great place to start for sure . Makes perfect sense to me to work out the kinks with a budget drone first . Thanks for the comment and have a great day!😎👍
Any idea why mine won't pair fully? rear lights go solid but front just keep blinking. it will take off and go up and down but no forward reverse etc...
I’m connected to the drone’s WiFi, (there is even a note rope middle of screen saying “connect successed”) but it will not show video/pictures like your video describes. And the drone never stops flashing either. A message pops up intermittently stating, “open video timer out, trying again “. Eventually the drone stops flashing and powers off resulting in my phone reverting to my original WiFi connection. To me it seems the drone is NOT connected despite the appearance and messages (albeit in poor English). Any advice?
Hello Check your notifications for a message asking if you want to stay connected due to no Internet. Choose yes if you find it. This should allow you to stay connected. Best of luck. Hope this helps. Thanks for stopping by! 😎👍
Hello, That's not good. When you try it are you outside ? If not try it outdoors and give it a few minutes. Usually it will beep to let you know it's locked in. Thanks for stopping by!😎👍
Mine I got working, but it was drifting slightly and hit an object. I changed the damaged blades. Now it goes through all the stuff successfully and the blades start spinning, then they immediately slow and stop with a beep. I’ve got no idea what to do next. I wonder if there’s a way to just reset everything and start fresh?
Hello This could be a gps issue. Try starting it up outside and wait for the transmitter to beep. Then try to take off . Hopefully this will work. You could also try turning off the GPS for indoor flying. Best of luck 😎👍
Thank You! Set up the S136. Found it more consistent to connect with phone then remote. Video recorded on phone was FHD 1080, very clear. No stabilization so probably not good enough serious hobby videos, but good enough for home movies. Make sure you calibrate it from the takeoff location and every time prior to flying to get more consistent flying performance.
Doubt all the functions shown on the function screen work with this model but will try a few once I fully understand them.
So far have always used the return to home for landing, works very well and turns off blades after landing.
This is an excellent choice for learning about drones and their basic capabilities. The stated specs on distance are very impressive and have no plans to test those limits.
So far very impressive for the price I paid ~$70 incl tax and shipping.
Great video👍🏽🇲🇫
😎👍
Simple and incredibly helpful. Thanks.
You're very welcome thank you for your comment. Truly appreciated!
Happy flying!😎👍
I'm in need of your help with this drone. I have already cut 3 fingers with the blades.And ever since I downloaded the app.I lost control of my remote control. It has 2 green lights and one red light flashing.And I can't do anything on the remote. Please help.
Hello
Sorry you're having trouble.
You could try a reboot and see if that helps. best of luck
I have the 135 drone, when I install the sd card and then press the camera button I cannot find any pictures. I am not even certain it took pictures. Is there a setting I am missing. Any help would be appreciated.
I'm not familiar with the 135 drone .
Thanks for stopping by
Thanks for taking the time to do this video!
Question: In slow speed how much flight time do you think a battery gets with this drone?
Thanks for stopping by!😎👍
I would say approx 12 minutes give or take a little.
Have a great day!
@@darerchobbyreviews Thanks again. Bought one to learn drones w/o risking crashing a $1000 unit. Did not expect much for the $65, but this thing is fun and great for what it is.
@@GoldChump Right on!
They are a great place to start for sure . Makes perfect sense to me to work out the kinks with a budget drone first . Thanks for the comment and have a great day!😎👍
Love this video , my first drone need all the help I can get. how often do you have to calibrate the drone
I calibrate it before every flight and get consistent control and return results
Any idea why mine won't pair fully? rear lights go solid but front just keep blinking. it will take off and go up and down but no forward reverse etc...
Hello,
Try switching to a higher speed.
Like 2 or 3 .
Could be the obstacle avoidance.
Best of luck.
Thanks for stopping by!😎👍
I’m connected to the drone’s WiFi, (there is even a note rope middle of screen saying “connect successed”) but it will not show video/pictures like your video describes. And the drone never stops flashing either. A message pops up intermittently stating, “open video timer out, trying again “. Eventually the drone stops flashing and powers off resulting in my phone reverting to my original WiFi connection. To me it seems the drone is NOT connected despite the appearance and messages (albeit in poor English). Any advice?
Hello
Check your notifications for a message asking if you want to stay connected due to no Internet. Choose yes if you find it. This should allow you to stay connected. Best of luck.
Hope this helps.
Thanks for stopping by! 😎👍
I got problems landing it.. help!
Uh oh I'll try!
Great video. Thanks for sharing👍
When I turn mine on I only got three blades turning
Uh oh, If it's new I would return it. If not I would check the wires first and the plug . May just need pushed back in . Best of luck 😎
After I connected to the drone internet it say connect but it say drone it not support and controller it not connecting when I turn it and I a iPhone
Thanks for stopping by! 😎👍
Try checking app permissions to see if that is why it's not working. Have a great day!
Where do I buy replacements
0:0
I would check on Amazon or Temu
Thanks for stopping by!😎👍
My gps don't want to connect
Hello,
That's not good.
When you try it are you outside ? If not try it outdoors and give it a few minutes. Usually it will beep to let you know it's locked in.
Thanks for stopping by!😎👍
Will an android smart phone work with s136? If yes what program do you use?
yes ,that's what i use.
rx drone
this video does not help it keeps beeping when i try calibrating it. like this beep beep beep beep??????
Tu peux nous le montrer quand il décolle ? Moi, je n'arrive pas
I would but I gave it away .
Thanks for stopping by! 😎👍
@@darerchobbyreviews D'accord 👍
Mine I got working, but it was drifting slightly and hit an object. I changed the damaged blades. Now it goes through all the stuff successfully and the blades start spinning, then they immediately slow and stop with a beep. I’ve got no idea what to do next. I wonder if there’s a way to just reset everything and start fresh?
Hello
This could be a gps issue.
Try starting it up outside and wait for the transmitter to beep.
Then try to take off .
Hopefully this will work.
You could also try turning off the GPS for indoor flying.
Best of luck 😎👍
I would recalibrate it as well after any crash
Gyro and compass .
Fake and almost perfect dji mini 3 pro clone 😂
But its good for beginners
Hater
Works absolutely amazing .. you mad 😂😂😂
this video does not help me it keeps beeping for no reason when i try calibrating it.
Hello
Are you trying to calibrate the gyro or the compass?
Thanks for the video… but PLEASE stop the ridiculously annoying music over your instructions.
You couldn't make it fly. That's why I came here.
Here is a video of it hovering.
Thanks for stopping by!😎👍
ruclips.net/video/WiXz5J5ub8Q/видео.html