Changing Fuel Filter on Toyota Tacoma SR5 - Bad Wrench
HTML-код
- Опубликовано: 3 окт 2024
- In this video, we replace our fuel filter on our Toyota Tacoma SR5. Fuel filters are part of vehicle maintenance that should not be forgotten. The fuel filter on this truck is almost 20 years old and is way over due to be replaced. The hardest part of changing this filter on any vehicle is get the fuel lines out of the filter. The filter bracket will be tricky if your vehicle is rusty also you will need to very careful with the gas lines.
Tools needed:
Catch pan
10mm wrench
14mm line wrench
19mm line wrench
1/4 drive ratchet
6 inch extension 1/4 drive
Blue shop towels
Please help the channel hitting LIKE, SUBSCRIBE, and sharing this video. Thank you all for your support!
Check me out on Facebook at: / crimsonhemi
Email me at: badwrenchentertainment@gmail.com
Featured vehicles on the channel:
02 GMC Sierra 1500 SLE "The 2wd TANK"
2020 KIA Soul EX "Champagne Bubbles"
04 Toyota Tacoma SR5 "Silver Swine"
Please check out my Playlists:
My New Channel: • Video
How to Videos: • Video
Tech Tips: • Video
I have a lot more videos to come, I am uploading twice a week. Look for new content Tuesday and Thursday with new topics in every video. If there is a topic you would like to see me cover or any automotive questions please comment down below. Thank you and see you on the next one!
#BadWrench
#SilverSwine
#filter
#fuel
#changefilter
#offroad
#toyotatacoma
#toyota
#toyotanation
#toyotausa
#toyotaoffroad
#toyotaracing
#the2wdTANK
#ChampagneBubbles
Wow, great tip about the reverse threads!
I have seen to many weird things in automotive so I always check threads on and things fuel line related.
Nice truck. I have a 2002 2.7 and my fuel filter is mounted to the engine block under the intake manifold. I wish mine was this easy to get to.
That is a repair I would do if you ever take the intake off.
Video on 2004 Toyota Tacoma fuel filter replacement
Is that a 2024 tacoma? The underside is looking 👌🏼
It's a 2004 Tacoma. It's extremely low miles.
What year is that. Mine is 2007. Same?
Mine is a 04, the next gen starts in 05. It might be a little different but should be similar to how to remove and install on a 07. Make sure you check for leaks after you change the filter.
Why does that Tacoma look like it's going to Barret Jackson auction.😅
😁 it is the cleanest 20 year old vehicle I have ever seen that wasn't a restoration.
Do you have a video on fuel pressure regulator replacement on a 2005 V6 Tocoma?
Not yet. Some regulators are attached to the fuel pump. If it is separate, I will be changing mine in a few months when I get it out of storage.
@@BadWrenchAuto Thanks. I am trying to solve a check engine light problem. The Toyota place could not find anything wrong. The codes are for lean bank left and right.
@R&D Andrews definitely low fuel pressure. There is a test port on the fuel rail, I think it's on the passenger side of the engine. Get a fuel pressure tester and make sure you are getting fuel pressure. I will look into regulators today and message you here.
Thanks for you help.
@R&D Andrews it looks like there is a fuel pressure regulator. The regulator will be on top of the engine. Looks like it might be bolted to the inside manifold. Mine is a 04 and 05 is a redesign, so I would start looking there for the regulator. Make sure before you unhook any lines that you bleed out the fuel pressure. The pressure regulator could fix it, but if the fuel pressure is still low after that, then the fuel pump is starting to go out. And I have found that you have to put a new filter in after you change the pump because the pump will throw pieces of the pump onto the filter blocking the flow of the new pump.
why was the reason to change it ? poor fuel economy?
Bro you ramble on to much