Finally we have a smaller twingrip, maybe in the future the xs version to complete my xs pliers collection. But the bigger version is also a great addition. The big stepcut xl and the cable knife are already in my toolbag.. 👍👍👍👍
Please make Safety Wire Pliers for the Aviation industry. You would literally corner the market in both commercial and military. Aviation needs Knipex tools.
I have purchased the 86 05 180 7” pliers wrench . Lengthen the lower handle 1” to facilitate a better hand grip on larger jaw capacities . Knipex manufactures the MOST DURABLE in the WORLD !
Saya selalu suka produk dari knipex,saya selalu menabung untuk membelinya,meskipun harganya mahal tapi kepuasan saya adalah nomor satu meskipun saya cuma penghobi dan pemakaian dirumah,salam dari INDONESIA❤🇮🇩
It has the older style comfort grip, the new one has the lanyard option. So probably they are still working on the new handle for their varieties of crimping pliers.
That’s nice. I could use the small version. But were those screws in the “car” really as tight as they would be, in the demo? There are reasons to need the leverage of a ratchet.
I’ve always would have liked a set of the plier wrench in i configuration where the handles are a little more parallel to the jaws. Live confidently and peacefully
Love Knipex and it's a proven product in my field.... good to see the Photovoltaic Industry getting some love, would love to have seen a Knipex MC4 tightening tool or wrench with cutter/stripper to go with this crimper. Something the Solar Industry needs that no manufacturer has.
The Twingrip 200mm is one of my favorite Knipex pliers! So after seeing this video, I ordered both the 150mm, and the 250mm! Another favorite of mine is the Raptor! Well, to be honest, I love all my 25+ Knipex pliers! 8:04 Not changeable? Hmm, sure looks like it though! 😉
würde mich wie viele andere über einen Knipex Adventskalender / Weihnachtskalender freuen. Allerdings nur dann sinnvoll wenn nicht sowie bei anderen Marktbegleitern die überwiegende Anzahl der Bestandteile Bits im Cent Format sind. Vielleicht kombiniert mit einem anderen deutschen Werkzeughersteller (Stahlwille?)
Please make a 11 in 1 screwdriver! Seems simple, but for a daily use tool one that was of Knipex quality would be huge. Not to mention just about anyone who owns Knipex tools would buy one…
Please give us a pair of the electrician pliers that can strip 22 stranded!! And make the textured dipped grips from the cobra an option on all your pliers 🥲
I too like the textured grips on my Cobra pliers, and my 200mm Twin Grips, I will add the 150mm/250mm versions to my kit. Being a maintenance guy, I often come across a toilet cistern with the screws that hold it to the wall completely corroded. The 150mm version will make it easier to grip the screws head on, instead of at an angle. I wish my Pliers Wrench had those types of handles too, the standard dipped handles can be a bit slippery at times. I would like a pipe slice with a ratchet option. I have Javac adjustable cutters ( They are a AC brand of tool ) which cut up to 22 mm, that tool then fits into a plastic handle which turns them into a ratchet style cutter, for which I use 95% of the time, but it’s useful having the option to slide them out and use as a bare unit for very small places. I will add the 3 sizes of pipe cutters in the following year.
Yes, save for them and get them. I have 5 cobras in different sizes, and 5 pliers wrench in 4 sizes, amd probably 15 different knipex pliers and gave some as gifts. They really are the best. But there are good cheap pliers that are similar to Knipex that are probably cheaper in your country, so you can get those until you can buy Knipex. Good luck 👍🏽
Those smaller twoingrips are just jewelry or toys in a toolbox. You’re never going to get enough squeezing and twisting force to remove a rusted stuck on fastener. The example shown was barely finger tight, what a joke. The real answer in your scenario is the first time the screw is slightly damaged or rounded off, replace it immediately, not let it keep getting worse like he suggested would be the case.
The lever will definitely give you enough squeezing force. As for the torque, just use a wrench or a pliers wrench. I guess you've never had to remove stuck bolts in an awkward position.
Your pliers won by a huge margin on a recent Project Farm test
And Todd was surprised to see it be so much better than everything else 😮
Shoutout to Marc your product manager - he has presented the new tooling really well and I really enjoyed him presenting.
Finally we have a smaller twingrip, maybe in the future the xs version to complete my xs pliers collection. But the bigger version is also a great addition. The big stepcut xl and the cable knife are already in my toolbag.. 👍👍👍👍
Twingrip in different versions.... Hoooo yeah!!! 👍👍👍😎
Keep up the good work, and please never stop to innovate.
Please make Safety Wire Pliers for the Aviation industry. You would literally corner the market in both commercial and military. Aviation needs Knipex tools.
Nah
I love the fact you will offer the larger and smaller Twin Grips in a set since we may have the first version!
Twin grip is amazing. Happy to have brothers too
Twingrips are a great tool can’t wait to get my hands on the different sizes!
I love mine, they were recommended to me by a friend who also works farm and ranch. I am very excited about both a large and small version.
This is welcome news. I was discussing the smaller Twin-Grip (possibility) last night.
We can't wait to discover the new Knipex products from this fall.
Amazing! I'm excited to test these new TwinGrip's.
This guy has an awesome accent and did a great job with this video
I have purchased the 86 05 180 7” pliers wrench . Lengthen the lower handle 1” to facilitate a better hand grip on larger jaw capacities . Knipex manufactures the MOST DURABLE in the WORLD !
Very excited for the small twin grip!
Saya selalu suka produk dari knipex,saya selalu menabung untuk membelinya,meskipun harganya mahal tapi kepuasan saya adalah nomor satu meskipun saya cuma penghobi dan pemakaian dirumah,salam dari INDONESIA❤🇮🇩
Cutting blade and 1000v insulated handle on the twin grip would replace combination pliers instantly
Twin grips present for myself this Christmas😀
150 twingrips absolutely going into my tool kit ❤
For crying out loud. I have two more Twin grips to buy. 😅
Twingrip in new sizes: I love you, Knipex.
Veamos que novedades nos trae Knipex
Shame the crimping pliers don't have the lanyard option, for working at heights
well spotted, I wonder if these are actually made by Knipex, maybe a private label deal
@@davidmccullough3404 That would make complete sense
It has the older style comfort grip, the new one has the lanyard option. So probably they are still working on the new handle for their varieties of crimping pliers.
@@davidmccullough3404 They are made by Knipex Rennsteig.
That’s nice. I could use the small version. But were those screws in the “car” really as tight as they would be, in the demo? There are reasons to need the leverage of a ratchet.
I’ve always would have liked a set of the plier wrench in i configuration where the handles are a little more parallel to the jaws. Live confidently and peacefully
Love Knipex and it's a proven product in my field.... good to see the Photovoltaic Industry getting some love, would love to have seen a Knipex MC4 tightening tool or wrench with cutter/stripper to go with this crimper. Something the Solar Industry needs that no manufacturer has.
Wiha has best MC 4 pliers.
@@Proiectediversediy dedicated MC4 plier? Never seen or heard of them, what's the part number?
The Twingrip 200mm is one of my favorite Knipex pliers! So after seeing this video, I ordered both the 150mm, and the 250mm!
Another favorite of mine is the Raptor!
Well, to be honest, I love all my 25+ Knipex pliers!
8:04 Not changeable? Hmm, sure looks like it though! 😉
Hi @R2_D3, as we mentioned in the video, they are really not changeable. Please do not try to change them, as this will affect warranty.
Wery good new tools 🔥
Those twin grips are amazing! Could you make a needle nose version?
Hi @gp8383, thank you for your feedback. We appreciate it!
Kind regards
Your KNIPEX Social Media Team
@KNIPEXofficial yea and the head could be a screwdriver bit like a flat head or red Robertson for inside electrical boxes
würde mich wie viele andere über einen Knipex Adventskalender / Weihnachtskalender freuen. Allerdings nur dann sinnvoll wenn nicht sowie bei anderen Marktbegleitern die überwiegende Anzahl der Bestandteile Bits im Cent Format sind. Vielleicht kombiniert mit einem anderen deutschen Werkzeughersteller (Stahlwille?)
Hi @maige, vielen Dank für Dein Feedback.
Smaller twin grip is genuis
I got to have the 150mm twingrips!!!
I'm just waiting for 125 Twin Grips to fit in my kit with 125 Pliers Wrench and 125 Cobra 🙏🏽
Would love a next size bigger pliers wrench
This video would really benefit from chapters/timestamps.
Please make a 11 in 1 screwdriver! Seems simple, but for a daily use tool one that was of Knipex quality would be huge. Not to mention just about anyone who owns Knipex tools would buy one…
The 150 twin grip need comfort grip
Dear knipex: twin grips 200 with cross hatch tooth. No extractor. Do it before Harbor freight does.
Will and EDC Twingrip be far off?
Здравствуйте, не знаете, в будущем будет обновление моделей knipex 8603125 или 8603150? Чтоб было больше раскрытие...
I would like a pliers wrench facing upright like a normal wrench
We need a knipex basin wrench.
Will twingrip 250 be available in chrome version?
Hi @SuproPro, currently, this is not planned at all. However thank you for your idea! :)
Kind regards from Germany
@ Thank you also greetings
Maybe you know something about vde (maybe unnecessary, but it would fit me with the set :))?
🏆
as usual "einfach geil!!"
We been waiting for Twin Grip 150mm and 250mm
Twingrip XS, please 🙏🙏🙏🙏
Please give us a pair of the electrician pliers that can strip 22 stranded!! And make the textured dipped grips from the cobra an option on all your pliers 🥲
Hi @codyhoward6509, thank you for your feedback.
I too like the textured grips on my Cobra pliers, and my 200mm Twin Grips, I will add the 150mm/250mm versions to my kit. Being a maintenance guy, I often come across a toilet cistern with the screws that hold it to the wall completely corroded. The 150mm version will make it easier to grip the screws head on, instead of at an angle. I wish my Pliers Wrench had those types of handles too, the standard dipped handles can be a bit slippery at times.
I would like a pipe slice with a ratchet option. I have Javac adjustable cutters ( They are a AC brand of tool ) which cut up to 22 mm, that tool then fits into a plastic handle which turns them into a ratchet style cutter, for which I use 95% of the time, but it’s useful having the option to slide them out and use as a bare unit for very small places. I will add the 3 sizes of pipe cutters in the following year.
Make twin grip needle nose pliers as well as other pliers with the slip position tech
That would be cool….and some Cobra with gripping teeth perhaps.
Next Cobra with gripping jaw.
I want gift 🎁
no you dont
Twin grips need a cutter
I wish i have knipex cobra.. maybe someday.....
Yes, save for them and get them. I have 5 cobras in different sizes, and 5 pliers wrench in 4 sizes, amd probably 15 different knipex pliers and gave some as gifts. They really are the best. But there are good cheap pliers that are similar to Knipex that are probably cheaper in your country, so you can get those until you can buy Knipex. Good luck 👍🏽
@@GruvisMutt wow.. nice collections.... thanks brother
@@ganjardrajat468 🤦♂🤦♂
👍
My wallet hates you 😂
When release, it is fall now
Hi @urjnlegend, both products will be available from now on. Please ask your specialist retailer whether it is already in stock.
@@KNIPEXofficial thank you
A smaller Twingrip is not really a "new" tool.
These bolts are already been loosened.
Those smaller twoingrips are just jewelry or toys in a toolbox. You’re never going to get enough squeezing and twisting force to remove a rusted stuck on fastener. The example shown was barely finger tight, what a joke. The real answer in your scenario is the first time the screw is slightly damaged or rounded off, replace it immediately, not let it keep getting worse like he suggested would be the case.
Hi @GNX157, thank you for your feedback.
The lever will definitely give you enough squeezing force. As for the torque, just use a wrench or a pliers wrench. I guess you've never had to remove stuck bolts in an awkward position.
knipex show
👍