Daikin | error code L1 | How to fault finding.

Brand : Daikin inverter
model : RZR50LUV1
Error code : L1
L1 is a outdoor PCb failure.There may be an underlying cause forthe failure so many also be a fan motor or compressor failure that caused the problem.
1)Reset power supply and test run .
2)check outdoor fan motor or compressor
3)if outdoor fan motor ok or compressor not running, please check the compressor incoming voltage.
• Daikin VRV3 | error co...
• How do i fix Error Cod...
• How to Replace Indoor ...
• Daikin | How to fault ...
• Daikin VRV3 | error co...
• Daikin VRV4 | error co...
#Daikin #VRV3 #VRV #VRV4 #Bon Mj

[@taqmeemalam8852]

🎉🎉🎉🎉🎉🎉🎉 good information

[@BonMj]

Thanks for watching

[@user-ck8lb6dt3q]

Sir, you are doing great, It would be much much understandable when you are elaborating the issues if we could hear your voice properly, if it's possible use a microphone. Thanks for your efforts.

[@BonMj]

Thanks for your advice.

[@lucky77au]

Very informative video. Thanks for subtitles. Have a great day

[@BonMj]

Thanks bro

[@Salmansalman-eb1mr]

Many thanks for sharing your experiences

[@BonMj]

Welcome

[@danialleek1038]

Hi uncle! I really like your videos because i like airconds. If can or if you have enough time right uncle maybe you can show how you fix the problems (maybe not for this scenario maybe like for a different problem you experience in the future). Anyhow i still appreciate all the knowledge that you have shared! Have a great day uncle! :DD

[@BonMj]

Thanks for watching my video and your great advice. 👍👍

[@danialleek1038]

@@BonMj Hahahaha it's nothing uncle. Keep up the great work! 👍🏽👍🏽

[@BonMj]

@@danialleek1038 thanks🙏

[@Louisyongcool2328]

Very clear information thanks

[@BonMj]

Thanks

[@Blueblurr112]

Thank you very much for the video.

[@BonMj]

Thanks

[@rnptek]

THANKS FOR SHARING SIR.👍

[@BonMj]

Welcome 👍

[@MrRandyj72]

Great video to test that board. Im going to try that on my training unit in my shop. When reading the AC voltage on the compressor does it matter which two of the three plug wires you use to test? Should you test across all three to see if similar voltage is there?
Last I want to see your technique for changing board and replacing thermal paste to heat sink. I always make a big mess.

[@BonMj]

Thanks

[@mecanicopav7168]

Me ajuda tengo ese problema donde es el problema que no hsblo inglês

[@musakavalci9470]

Excellent video as always 👌

[@BonMj]

Thanks

[@karimchiu7527]

thanks Sir Bon

[@BonMj]

Morning. Welcome bro.

[@shreekanay698]

Thanks a lot Sir......

[@rdenir]

Great and informative video

[@BonMj]

Thanks

[@mecanicopav7168]

I have the same problem which could be A/C error detected unit 0 L1

[@md.imranhossain1892]

Tnxxc

[@BonMj]

Thanks

[@johnnyroxannebautista2063]

Thank you for sharing boss Bon

[@BonMj]

Welcome

[@honibuddinhonibuddin3714]

Thank you

[@BonMj]

🙏🙏

[@16valve64]

Good job sir

[@BonMj]

Thanks

[@emmanuelhare2042]

Hi, bro I'm having trouble getting my daikin indoor fan problem shot cycling.

[@laworder6092]

Thanks for sharing Bon Mj.how r you?

[@BonMj]

I m good . thanks bro.

[@hafeezdaikin2517]

👍

[@BonMj]

Thanks

[@salimagwan9672]

Bon sir there is little confusion in which 2 points I have to see the voltage in the U.V.W of the compressor and it is in DC volt or AC volt

[@BonMj]

AC

[@sotirisgrig1406]

Great video my friend!

[@BonMj]

Thanks bro

[@janshaw5472]

老师，请问您刚才量的pcb to compressor 的线是电压是134 左右！是红色和蓝色？是DC 还是AC

[@BonMj]

三条都一样，AC voltage

[@janshaw5472]

@@BonMj 谢谢老师

[@gothandaraj860]

Daikin vrv 4 series pj 12 error for change control pcb and how to identify factory pcb and spare pcb

[@user-bq7hs2qy2p]

Sir how to BRCID52 Model remote dn code settings

[@BonMj]

What code you need

[@tora_100]

Batter use inverter checker?

[@BonMj]

Yes

[@JOSESantos-ss2qo]

Estou com esse erro em um modelo k7 36.000 btus alguém pode me ajudar erro L1

[@BonMj]

Check voltage and control pcb

[@mecanicopav7168]

​@@BonMjA/C error detected unit 0 L1 help me how to solve

[@shailendrakumarrawat2716]

Sir overload kaise check karenge

[@safimach9844]

Is there a way to contact you? Thank you

[@kosrllpkoak6744]

Hello Daikin inverter error code RJ. Why?the same machine in video. Thank you

[@BonMj]

Bro. Cant find this error code

[@sharvanmourya4764]

Sir my name is shravan mourya I'm from Mumbai vrv work please help to me find the arror code app neme please sir

[@user-im8rm4wl4k]

Did not understand sir. What was the problem with device?

[@LC-qi5ff]

PCB was not sending correct voltage to the compressor

[@user-im8rm4wl4k]

I guess that the coil of compressor lie on the body of this compressor.

[@user-im8rm4wl4k]

And why are you checking AC voltage not DC?

[@svengineering673]

WHICH WIRE TO CHECK YELLOW RED OR BLUE

[@BonMj]

Both can

[@gothandaraj860]

Daikin inverter 1.5 tr l5 error what's the complaint

[@BonMj]

Check inverter pcb and compressor

[@gothandaraj860]

Compressor body continuety or ohm value

[@BonMj]

@@gothandaraj860 better you take out the compressor wire from terminal and on the aircon.
Measure the voltage

[@mdsadabalam9434]

Was that inverter AC

[@BonMj]

Yes

[@anamaedejose2697]

Sir gudevining how to trouble off AO T1 T2

[@BonMj]

What mean AO T1 T2

[@shailendrakumarrawat2716]

Sir inverter ki cp kaise check ✔️ kare

[@ashleypatcho3640]

Not good did not show how fix this error

[@mdsadabalam9434]

Where are you from sir ?

[@BonMj]

Singapore

[@mdsadabalam9434]

Sir I want to work with you I am from india I have completed technical education I have 1 year of experience I want to learn VRV chiller work. May I have opportunity to work with you? Please sir reply

[@RahulYadav-wz4qh]

H6

[@BonMj]

Check compressor cable and terminal, check outdoor pcb.

[@BonMj]

U can off the power supply and waiting for 5minutes and on back.

[@jayannbedio4171]

Pag nag blog tanggalin mo face mo si maintindihan