Laser Transfer papers - Two Forever Papers & Two UniNet iColor Papers
HTML-код
- Опубликовано: 25 мар 2020
- Thank you for taking the time to check out this video! Please hit the like button or subscribe for more content!
If you would like to skip ahead to a specific part I've noted the time in the video down below you can skip to. The links are taking you back to the beginning when I clicked them for some reason, but they work when you copy and paste them into your browser so I left both.
Josh talks about the best option for wood 47 seconds - • Laser Transfer papers ...
Forever Multi-Trans Select for Paper and some wood - 1 min 14 seconds - • Laser Transfer papers ...
Forever Multi-Trans Hard Surface Gold and Silver 2 min 40 seconds - • Laser Transfer papers ...
UniNet I color Select paper - 4 min and 29 seconds • Laser Transfer papers ...
UniNet I color Premium paper - 6min and 45 seconds - • Laser Transfer papers ...
Listed below in order are the items shown in the video. Printers at the bottom.
Forever Multi Trans Select for Paper an Wood - ( look below for better wood solution)
10 pack - www.uscutter.com/Forever-Mult...
100 pack - www.uscutter.com/Forever-Mult...
Remember, Josh says if you want to do most wood use Forever Flexsoft
10 Pack - www.uscutter.com/FOREVER-Flex...
100 Pack - www.uscutter.com/Forever-Flex...
9x12 inch swing arm heat press
www.uscutter.com/9-x-12-Swing...
15x15 Swing arm
www.uscutter.com/15-x-15-Digi...
Forever Multi-Trans select Hard Surface
10 pack - www.uscutter.com/Forever-Mult...
100 pack - www.uscutter.com/FOREVER-Mult...
AlbaChem VLR - www.uscutter.com/AlbaChem-Vin...
UniNet iColor select paper
10 pack - www.uscutter.com/UniNet-iColo...
100 pack - www.uscutter.com/UniNet-iColo...
UniNet iColor Premium paper
10 pack - www.uscutter.com/UniNet-iColo...
100 pack - www.uscutter.com/UniNet-iColo...
UniNet printers - www.uscutter.com/UniNet-Print...
Ghost printers - uscutter.com/ghost-toner-prin...
USCutter.com offers same-day shipping, financing, and lifetime phone support on every item offered.
See our complete selection of products at www.USCutter.com or click some of the links below to see some of our most popular categories!
Vinyl Cutters - uscutter.com/vinyl-cutters/?s...
Heat Presses - uscutter.com/heat-presses/?so...
Flatbed Cutters - uscutter.com/flatbed-cutters/...
Laminators - uscutter.com/laminators/?sour...
Printers - uscutter.com/digital-printers...
Wide Format Printers - uscutter.com/wide-format-prin...
Vinyl - uscutter.com/vinyl-material/?...
Transfer Tape - uscutter.com/tape-mask/?sourc...
Heat Transfer Vinyl & Papers - uscutter.com/heat-transfer/?s...
Banner & Sign Supplies - uscutter.com/banner-sign/?sou...
More available at www.USCutter.com
Loved your video :)
That was some great info
This guy really knows his stuff!
Good
lol
Hi Josh! Thanks so much for your informative videos. In your opinion does the HP Ghost Printer (specifically the HP M452) REALLY print as vibrant of colors as the icolor550 printers? If looking for long lasting and vibrancy of colors on T-shirt’s, it would be helpful know if it would be best to go with a Uninet OR HP GHOST M452? And with Ghost, what if there is black in the image but it needs the white undertone for the color to pop....Is this possible with HP/GHOST?
Hello, when you are marrying the A and B sheets, how much pressure do you use when you rub the hot sheets with a cloth? I have been getting started with my iColor 560 using the standard 2 step paper and not exactly sure if I should use heavy or light pressure when rubbing the sheets with a cloth before separating them. It seems that changing the pressure used could make a difference in how well the sheets separate from each other. Additionally, are any of the transfer papers harder than others to get a clean adhesive transfer? Thanks for the video! I am trying to figure out which paper will be the best choice for me and this was very helpful.
What setting was it that you said to change to heavy on the uninet , I have the 560 where would that setting be at, I'm just learning the machine so if anyone can help me out with that. What setting i'm changing to heavy and were its at in the programs that come with it thanks.
Which paper has the best feel
i try to find more info about it but there not any out there what the difference in the icolor premium vs icolor premium strech
Hello! One question 😊 I saw in your other videos that Forever Multitrans is curling and it is difficult to do ghosting on it because of that. I was thinking of a go-around and wanted to know what you think about it. Here it goes: do you think that printing a small dot on the non printable area will curl the paper the other way around and make it easier to be “fed” in to the Ghost Printer? 👻
Seems like it would be worth a shot!
For the ‘fake wedding invitations’ lol it has to be the OEM CMYK toner?
No, I just wanted to show that you could do it with that. It works even better when you use UniNet or Ghost toner.
I'm in the process of searching for a printer 2 create transfers, what printer do you recommend? I also want 2 learn sublimation. Thank you
It really depends on how good you are with using computers. If you are not good with computers and want something easy that has done most of the work for you, go with the Sawgrass sublimation. If you have around $4800 to spend and are pretty good with designing your own images in a graphic design program and know your way around a computer pretty well then I would go with a white toner printer. Sawgrass printer video part 1 - ruclips.net/video/QPt39Dvwq1A/видео.html
Question - I'm thinking about getting an HP to use the Ghost White. Can I use standard HP toner for the C,M,Y? Second, Can I print Photo images as well with this or will this only work for graphic images?
OEM HP toner will work and not cause any color issues from use with a heat press. Yes you can print photo images as well as vector images with this but you will ALWAYS have to use the two passes to create a CMYK and White image. There is no rip-software to do this for you so you will also need some computer skills. I have USCutter.com Ghost videos on the way, but for now you van view my personal page for more information about Ghost ruclips.net/channel/UCVWCvQRIOwcMSWM5xQqP2rw
@@uscuttervideos what do you mean by 2 passes? Put the transfer paper in the printer, it comes out then put it back and run it again?
@@assadnujjoo Exactly. Above, Josh stated there is no rip-software to do this. That is not exactly true. If you use Affinity Photo, you can purchase an add-on for color separation. This will allow you to print just the white under base on the final pass.
I already know how to do the prints marry the papers together, I have made shirts already I just don't know how to use the settings right yet. So if any one has any settings that they would like to share with me to help me get started with this. I'll be glad to show you some settings for sublimation in exchange for your help, I currently do a lot of sublimation right now and I need some help with I color 560
does the icolor paper come in a and b when you buy the paper or do you have to buy each one separate?
If we sell any two step papers that require and A and B sheet they are sold together and not separate.
@@uscuttervideos Would a oki c5200n work with the forever flex soft and laser dark paper
when using premium paper you mention to use a heated laminator..
my question is if you heat press the A-B together as they are still hot can you put them through a cold laminator so i dont need to buy another piece of equipment.. if this wont work then i have no choice to buy another piece equipment
Instructions state to use a heated laminator and I have never gotten it to work otherwise.
How do these transfers actually feel to the touch in comparison to a DTG printed shirt? Washability?
iColor select is the lowest costing two-step paper on the market and will last about 15-20 washes it has a softer adhesive that works better with large solid designs. The iColor premium is on the opposite side of the price scale but has a soft feel like a screen print and will last 100+ washes.
@@uscuttervideos I am researching the iColor 550 Printers, thinking that I really need this printer. I did not know about the iColor Premium. How much is that for the two parts each, as I don't want to raise the cost of my shirts. We put out $14.00 full color shirts, with Free S&H. So price margins mean the most to keep us profitable. We do a lot of shows, and the portability is a major issue. Do your Uninet Printers come with the RIP software? Without that, the printers are pretty much useless, as the prints come out feeling like paper with low washability tests.
Question my image sticks to the adhesive paper and not the transparency sheet how do i fix this?
You are letting it cool down so the adhesive is staying on the B sheet and pulling the toner to it.
When trying to pull away the adhesive paper, my image rips, i tried 6 different times. Do you know what i am doing wrong?
It sounds like you are allowing it to cool down too much before separating the A and B sheets.
Every heat press I have played with needs a co-efficiency applied to the temperature settings. Use a infrared temperature gun and measure the actual press temperature. EG. Set the press temp to 300F. Once it reaches the set point, read the actual. Most of mine always run hotter than stated, but that is not true for all. Say you set it to 300, but at 300 it is actually running say, 320. Divide the set temp by the actual, and that will give you the number you need to actually set the press to. In this case it is 300 divided by 320, leaving you a co-efficient of 0.94. We call this the Fudge Factor. So to get the right temp, take 300, multiply it by 0.94 and that will get you as close as you can be to the right temp. Again, the above stated says you should be running your press at 282. In reverse, if you set it to 320 and it only gets to 300, then you want to multiply it by 1.07. In this case you would set the press to 342. Once you open the press, grab a corner and start your low peel. You need to make sure you do it as close to the right temp as possible for the best results. You can get a cheap infrared temp gun at www.amazon.com/dp/B08QZ7XWXK/ref=sspa_dk_detail_2?pd_rd_i=B08QZ7XWXK&pd_rd_w=8NaO1&pf_rd_p=91afecf5-8b2e-41e2-9f11-dc6992c6eaa1&pd_rd_wg=Hvcfx&pf_rd_r=HYZDF0GPYW3DDCE6M803&pd_rd_r=fd58ad42-4ab4-4085-a1ec-5a0b176b39f2&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzR1dNUFpORUJTMVY1JmVuY3J5cHRlZElkPUEwNjI0MDQ5VEdESk85WVNNN1BSJmVuY3J5cHRlZEFkSWQ9QTA1MjQ1MDkzS1NWM0pHR0w3VTY0JndpZGdldE5hbWU9c3BfZGV0YWlsJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1 This is not an affiliate link, and is not the gun I have, but is a cheap alternative.
What is the difference between Select and Standard Icolor paper?
The standard has a harder adhesive that works better with rasterized designs. The select has a softer and elastic adhesive that will work better with solid designs.
Off topic but how has that laminator worked out for you???
We had the letter size one at the office and I liked it so much that I bought the tabloid size one for personal use. I use it with almost all of my 2 step papers and have laminated everything that needed to be laminated at home.
If white ink is always your base color when printing for a dark garment, why not simply add a white pigment to the B-sheet so you don’t have to buy special ink cartridges or printers?
Papers like Forever Laser dark already do that, but the problem is that the process still requires a certain amount of toner to come into contact with the adhesive for it to transfer over. If you wanted to do solid color images with no gradients or brighter colors you could. You can Increase the amount of toner density on your printers’ settings to help with this a bit, but you will still not be able to get complete adhesion to lighter colors and gradients.
What printer and paper A3 size are the best???
That really depends on what you want to do. Take a look at some of my early Ghost videos on my personal RUclips page. I am in the process of creating new and updated ones for USCutter.com now, but they won't be ready for another month. ruclips.net/channel/UCVWCvQRIOwcMSWM5xQqP2rw
@@uscuttervideos looking to print tshirts i do sublimation large format but sometimes i get ask for tshirt with screen printing looks and feel... something bigger like a3
Also looking for that answer
Where can I find the clear paper ..and what is the name of it ??
I used the iColor select paper in this video - www.uscutter.com/UniNet-iColor-Select-2-Step-Transfer-Paper-10-Pack