What kinda of items do you have for tuning? Are you on a standalone ecu or stock ecu with power commander modules? I guess I should ask what kind of bike as well as some ecus have been unlocked to a point were extensive tuning can be done with the stock ecu. Just have to have the right software and hardware to flash it.
2 step is more of a 2nd rev limit you can get that with the power commander 5 if you want a pops and bang 2 step You can kinda get that with a power commander 5 and ignition module. You would have to set it up on a second map on a switch as you wouldn't want to have that in the riding tune. You will be adding fuel and retarding ignition timing for the pops and bangs so a map switch would be needed on the power commander
Well you can with a power commander v. And depending on which gen of pcv you may not need an ignition module. But with the pcv there's a launch control setup. You could setup a second map on a switch that will treated ignition and add fuel when on launch control. :)
@@wrxluis2175 just remember you might need an ignition module. Some newer pcv have the ability to adjust ignition timing but not all. And then wiring in a map switch on the pcv so you can flip between 2 step map and your riding map. Key is to retard timing and add fuel.
@@wrxluis2175 haha I appreciate that but I'm still learning. Learn something new weekly in the garage. As for ignition module power commander should make one for your bike but before you go looking. Download the power commander software onto your computer/laptop and plug the pcv in. Look through all the settings and see if yours can do ignition changes. It will save you some hard earned money if it can.
![Installing a Launch Controller on the Busa [MSD Launch Master]](/img/1.gif)
Honestly had fun playing with the timing and ignition to make fireworks in my garage. 100% will do again
2-step baby!! Whooooooooooooo
It's fun!
I thought 2step was that spice stale cracker used!!!
Kidding!! Glad to see you back on
Hey there Josh!! Hope all is well!
Honeslty I've been meaning to get me some 2step spice but keep forgetting. "Put it on a cracked duuu"
We need updates!
I live in New Jersey trying to find somebody that can tune or put a two-step on my motorcycle
What kinda of items do you have for tuning? Are you on a standalone ecu or stock ecu with power commander modules?
I guess I should ask what kind of bike as well as some ecus have been unlocked to a point were extensive tuning can be done with the stock ecu. Just have to have the right software and hardware to flash it.
Hey I’m looking to inquire rear swingarm for my 2008 Yamaha FZ 1000.
C&S customs is the only place now that sells a extended swingarm for the FZ1.
Can you use a 2 step launch control with a stock ecu
2 step is more of a 2nd rev limit you can get that with the power commander 5 if you want a pops and bang 2 step You can kinda get that with a power commander 5 and ignition module. You would have to set it up on a second map on a switch as you wouldn't want to have that in the riding tune. You will be adding fuel and retarding ignition timing for the pops and bangs so a map switch would be needed on the power commander
I want to 2 step my fz8 lol
Well you can with a power commander v. And depending on which gen of pcv you may not need an ignition module. But with the pcv there's a launch control setup. You could setup a second map on a switch that will treated ignition and add fuel when on launch control. :)
@@rhetericalpha thanks would tell my tuner about it. I have the power commander 5 but not installed
@@wrxluis2175 just remember you might need an ignition module. Some newer pcv have the ability to adjust ignition timing but not all. And then wiring in a map switch on the pcv so you can flip between 2 step map and your riding map.
Key is to retard timing and add fuel.
Which ignition module you recommended? you are the fz god 🙇🏽♂️ whatever you recommend I'll buy.
@@wrxluis2175 haha I appreciate that but I'm still learning. Learn something new weekly in the garage.
As for ignition module power commander should make one for your bike but before you go looking. Download the power commander software onto your computer/laptop and plug the pcv in. Look through all the settings and see if yours can do ignition changes. It will save you some hard earned money if it can.
That was awesome !!
Btw I sent you a dm on Facebook bro😅
Hey bud I looked and I didn't see a DM. Did you send it to my personal FB account?